ASMT-LB50-106CB [AVAGO]
SPECIALTY OPTOELECTRONIC DEVICE;
| 型号： | ASMT-LB50-106CB |
| 厂家： | 
AVAGO TECHNOLOGIES LIMITED |
| 描述： | SPECIALTY OPTOELECTRONIC DEVICE 光电 |
| 文件： | 总6页 (文件大小：98K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ASMT-Lx50
Flexible Light Strip Module
Data Sheet
Features
Description
• Outstanding abrasion resistance
• Excellent mechanical properties
• Excellent chemical resistance
• Excellent light transitivity
Flexible Light Strip Module is high performance light
tube produced by Avago Technologies, integrating
LEDs solution with excellent thermoplastic
polyurethane. This Light Strip is an environmentally
friendly “Green Material”, it offers a unique combination
of mechanical, physical, and chemical properties,
including high tensile strength, excellent abrasion
resistance, outstanding flexibility, weather resistance,
non toxic, recyclable, and decomposable. Flexible Light
Strip Module provides conveniences for the designers
to integrate light strip onto their devices with minimum
consideration on optical and mechanical optimization.
The specially designed housing helps to concentrate
the light for maximum efficiency and the specially
designed PCB provides plug-and-play type of solution
for assembly. The total solution provides the ease of
design and assembly for designers.
• High shaping flexibility
• Available length 100mm to 500mm at interval of
1mm
• Available voltage source : 5V, 9V and 12V
• Available color: Blue, Green, Red and White
• Light strip module in circular configuration
Applications
• Handheld devices
• Cellular Phones
• Decorative lighting
• Electronics and electrical appliances
Package Dimensions
Pin 4
Pin 1
LED2
R
LED1
R
Pin 3
Pin 2
Pin 1 Ground for LED 1
Pin 2 Ground for LED 2
Pin 3 Vcc for LED 1
Pin 4 Vcc for LED 2
Flexible light strip length = 226mm
Standard Part Number = ASMT –Lx50
Notes:
1. All dimensions in millimeters (Inches).
2. Tolerances are 0.1mm ꢀ0.004 IN.ꢁ
Unless otherwise specified.
3. Strip diameter ø1.4mm.
Part Numbering System for Other Available Options
ASMT – L x 50 – xxx x B
Diameter
B – ø1.4 (currently available option)
V
cc
A – 5V
B – 9V
C – 12V
Length
100mm to 50mm at interval of 1mm
Circular Flexible Light Strip
Color
B – Blue
G – Green
R – Red
W – White
2
Recommended Connector
ASMT-Lx50
Header pins
Customer
motherboard
CAUTION: ASMT-Lx50 devices are Class 1 ESD sensitive. Please observe appropriate precautions during
handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details.
Absolute Maximum Ratings at T = 25°C
A
Parameter
ASMT-Lx50
Unit
mA
mW
V
ꢀ1ꢁ ꢀ 2ꢁ
DC Forward Current
30
ꢀ2ꢁ ꢀ3ꢁ
Power Dissipation
153
ꢀ2ꢁ
Reverse Voltage (IR = 100 A)
5
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Manual Soldering Temperature
110
°C
-30 to 60
°C
-30 to 60
°C
350°C for 3 sec max
Note:
1. Derate linearly as shown in Figure 4.
2. For each individual LED + resistor string.
3. Vcc max = 5.1V.
Electrical Characteristics at T = 25°C
A
[1]
LED Forward Current
IF (mA) @ Vcc = 5.0V
[1]
Voltage Vcc (Volts)
Part Number
ASMT-Lx50
Note:
Minimum
Typical
Maximum
Typical
4.9
5.0
5.1
20
1. For each individual LED + resistor string.
2. Resistor value is determined by forward voltage of LED.
3
Optical Characteristics at T = 25°C
A
Peak
Color, Dominant
Wavelength
Luminous
Incidence
Ev (lm/m2)
[5]
Luminous Intensity,
IV [1] [2] (mcd) @ 20mA
Wavelength,
[1]
(nm)
[1] [3] (nm)
peak
d
Part Number
ASMT-LB50
ASMT-LG50
ASMT-LR50
Min.
71.5
Max.
180.0
450.0
285.0
Typ.
468
Min.
465
Max.
475
Typ.
30.0
180.0
112.5
520.0
637.0
515.0
615.0
535.0
630.0
130.0
30.0
Luminous
Incidence
Ev (lm/m2)
[5]
Luminous Intensity,
IV [1] [2] (mcd) @20mA
Typical Chromaticity
Coordinates
[1] [4]
Part Number
Min.
Max.
X
Y
Typ.
ASMT-LW50
1000
1600
0.31
0.31
230.0
Notes:
1. For individual LED light source only.
2. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of
the LED package. Refer to Iv bin table for binning structure and tolerance.
3. The dominant wavelength, ld, is derived from the CIE 1931 Chromaticity Diagram and represents the perceived color of the device. Refer
to color bin limit tables for binning structure and tolerance.
4. The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device. Refer
to color bin limit tables for binning structure and tolerance.
5. Measurement done at the center of the elastomer light stripe away from the LED light sources.
[1] [2]
Light Intensity (IV) Bin Limits
Red
Blue
Intensity (mcd)
Minimum
112.5
Intensity (mcd)
Minimum
71.50
Bin ID
Maximum
180.0
Bin ID
Maximum
112.50
R
Q
S
180.0
285.0
R
112.50
180.00
Tolerance: 15%
Tolerance: 15%
Green
White
Intensity (mcd)
Minimum
180.0
Intensity (mcd)
Minimum
1000
Bin ID
Maximum
285.0
Bin ID
Maximum
1200
S
W1
T
285.0
450.0
W2
1200
1400
Tolerance: 15%
W3
1400
1600
Tolerance: 15%
Notes:
1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago
representative for information on current available bins.
2. For individual LED light source only.
4
[1] [2]
Color Bin Limits
Blue
White
Rank
Chromaticity Coordinates
Dom. Wavelength (nm)
C11
X
Y
X
Y
X
Y
X
Y
X
Y
X
Y
X
Y
X
Y
X
Y
X
Y
0.290
0.306
0.297
0.316
0.303
0.326
0.290
0.274
0.297
0.283
0.303
0.293
0.310
0.336
0.320
0.350
0.310
0.303
0.320
0.318
0.297
0.316
0.303
0.326
0.310
0.336
0.297
0.283
0.303
0.293
0.310
0.303
0.320
0.350
0.330
0.365
0.320
0.318
0.330
0.333
0.297
0.283
0.303
0.293
0.310
0.303
0.297
0.251
0.303
0.261
0.310
0.271
0.320
0.318
0.330
0.333
0.320
0.285
0.330
0.300
0.290
0.274
0.297
0.283
0.303
0.293
0.290
0.241
0.297
0.251
0.297
0.251
0.310
0.303
0.320
0.318
0.310
0.271
0.320
0.285
Bin ID
Minimum
465.0
Maximum
B
470.0
475.0
C12
C13
C21
C22
C23
D11
D12
D21
D22
C
470.0
Tolerance: 1.0nm
Green
Dom. Wavelength (nm)
Bin ID
Minimum
515.0
Maximum
A
520.0
525.0
530.0
535.0
B
520.0
C
525.0
D
530.0
Tolerance: 1.0nm
Red
Dom. Wavelength (mcd)
Bin ID
Minimum
Maximum
-
615
630
Tolerance: 1.0nm
Tolerance of each bin limit = 0.02
Notes:
1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago
representative for information on current available bins.
2. For individual LED light source only.
5
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Blue
White
Red
D12
D22
D11
D21
Green
C13
C23
C12
C22
C11
C21
0.28
0.30
0.32
0.34
0
5
10
15
20
25
30
35
X - COORDINATE
DC FORWARD CURRENT - mA
Figure 1. White binning in CIE 1931 Chromaticity Diagram.
Figure 2.. Relative luminous intensity vs. forward current for
LED light sources only.
35
Red
Green
Blue
30
White
25
20
15
10
5
0
0
1
2
3
4
FORWARD VOLTAGE - V
Figure 3. Forward voltage vs. forward current for LED light
sources only.
Figure 4. Maximum forward current vs. ambient temperature
Handling Caution
1. Bending radius of the lightpipe shall always be larger
than 10 times of the lightpipe diameter to avoid
impact to its appearance and performance.
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0430EN
AV01-0649EN - November 13, 2006
相关型号：
©2020 ICPDF网 联系我们和版权申明