5082-516Y-00000 [AVAGO]
7 SEG NUMERIC DISPLAY, YELLOW, 13mm, PLASTIC PACKAGE-10;型号: | 5082-516Y-00000 |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | 7 SEG NUMERIC DISPLAY, YELLOW, 13mm, PLASTIC PACKAGE-10 |
文件: | 总10页 (文件大小:127K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HDSP-315x/316x/515x/516x Series
10mmand13mmSlimFontSevenSegmentDisplays
DataSheet
Description
Features
The HDSP-31xx-51xx Series of displays incorporates
a newslim font character design. This slim font features
narrow width, specially mitered segments to give a
fuller appearance to the illuminated character. Faces
ofthese displays are painted a neutralgrayfor enhanced
on/off contrast.
• Excellent appearance
• Slim font design
• Mitered corners, evenly illuminated segments
• Gray face for optimum on/ off contrast
• Choice of colors: DH AlGaAs Red, High Efficiency Red
(HER), Yellow, and Green
• Low current available, AlGaAs Red and HER Choice of
character size: 10 mm and 13 mm
All devices are available in either common anode or
common cathode configuration with right hand decimal
point. Low current versions are available in either
AlGaAs red or HER.
• ±50° viewing angle
• Characterized for luminous intensity
Devices
AlGaAs
Red Low
Current
HDSP-
HER
Std.
Current
HDSP-
HER
Low
Current
HDSP-
Yellow
Std.
Current
HDSP-
Green
Std.
Current
HDSP-
Package
Draw ing
Description
315H
316H
515H
516H
315E
316E
515E
516E
315L
316L
515L
516L
315Y
316Y
515Y
516Y
315G
316G
515G
516G
Common Anode,
10 mm Display
A
B
A
B
Common Cathode,
10 mm Display
Common Anode,
13 mm Display
Common Cathode,
13 mm Display
Part Numbering System
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Opt ions[1]
00: No Mechanical Option
Color Bin Opt ions[1,2]
0: No Color Bin Limitation
Maximum Int ensit y Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Int ensit y Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configurat ion/Color[1]
H: AlGaAs Red
E: High Efficiency Red
G: Green
Y: Yellow
Device Specific Configurat ion[1]
Refer to Respective Datasheet
Package[1]
Refer to Respective Datasheet
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact
your nearest Avago representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are
typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective
datasheet for specific bin limit information.
2
HDSP-315x/ 316x Series
LUMINOUS
INTENSITY
CATEGORY
COLOR BIN (NOTE 3)
2.54 ± 0.38
6
10°
0.9
a
1
2
3
4
5
10
9
f
b
g
12.8
± 0.2
8
10
4 x 2.54
e
c
7
d
DP
6
0.53
DIA. 1.2
PIN FUNCTION
± 0.05
6.4
9.7 ± 0.1
± 0.1
1
2
3
4
5
6
7
8
9
10
g
f
DATE
CODE
7
Common A/C
e
d
DP
± 0.1
10.4 MIN.
c
Common A/C
b
a
0.3 ± 0.05
7.62
± 0.38
HDSP-515x/ 516x Series
LUMINOUS
INTENSITY
CATEGORY
7.40
10°
COLOR BIN (NOTE 3)
10 9
8 7 6
1.25
a
f
b
DATE
CODE
+ 0.3
– 0.1
g
17.50
15.24 ± 0.3
13.0
e
c
d
DP
0.29 ± 0.08 TYP.
1
2 3 4
5
DIA. 1.25
5.08
PIN FUNCTION
6.40
± 0.1
12.25 ± 0.15
1
2
3
4
5
6
7
8
9
10
e
d
Common A/C
c
DP
b
7.00
± 0.1
3.60 ± 0.3
a
Common A/C
f
g
1.04 ± 0.3 TYP.
2.54 ± 0.3 TYP.
0.58 ± 0.08
NOTES: 1. PACKAGE DIMENSIONS IN MILLIMETERS.
2. UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. FOR YELLOW AND GREEN DEVICES ONLY.
3
Absolute Maximum Ratings
AlGaAs
Red Low
Current
HER
Low
Current
Description
HER
Yellow
Green
Units
Average Power per
Segment or DP
37
105
52
45
80
105
mW
Peak Forward
Current per Segment
or DP
45
90[2]
60[5]
90[7]
mA
DC Forward Current
per Segment or DP
15[1]
30[3]
15[4]
20[6]
-40 to + 100
30[8]
mA
°C
°C
V
Operating Tempera-
ture Range
-20 to 100
Storage Temperature
Range
-40 to + 100
Reverse Voltage per
Segment or DP
3.0
Wavesoldering
Temperature for
3 seconds 1.59 mm.
below body
250
°C
Notes:
1. Derate above 91°C at 0.53 mA/°C.
2. See Figure 4 to establish pulsed conditions.
3. Derate above 53°C at 0.45 mA/°C.
4. Derate above 80°C at 0.38 mA/°C.
5. See Figure 5 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 6 to establish pulsed ocnditions.
8. Derate above 39°C at 0.37 mA/°C.
4
Electrical/ Optical Characteristics at TA = 25°C
AlGaAs Red Low Current
Device
Series
Test
HDSP-
Parameter
Symbol Min. Typ. Max.
Units
Conditions
315/316H Luminous Intensity/Segment[1,2]
515/516H (Digit Average)
IV
180
650
µcd
IF = 1 mA
IF = 1 mA
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
V
F
1.8
645
637
15
2.2
V
nm
λPEAK
λd
nm
Reverse Voltage/Segment or DP[4]
V
R
3
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
255
°C/W/Seg
HER
Device
Series
HDSP-
Test
Conditions
Parameter
Symbol Min. Typ. Max.
Units
315/316E Luminous Intensity/Segment[1,2]
515/516E (Digit Average)
IV
450 2600
µcd
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
V
F
1.9
635
626
2.5
V
nm
Peak Wavelength
Dominant Wavelength[3]
λPEAK
λd
nm
Reverse Voltage/Segment or DP[4]
V
R
3
30
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
HER Low Current
Device
Series
Test
HDSP-
Parameter
Symbol Min. Typ. Max.
Units
Conditions
315/316L Luminous Intensity/Segment[1,2]
515/516L (Digit Average)
IV
180
370
µcd
IF = 2 mA
IF = 2 mA
Forward Voltage/Segment or DP
V
F
2.1
635
626
30
2.5
V
nm
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
λPEAK
λd
nm
V
R
3
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
5
Yellow
Device
Series
Test
HDSP-
Parameter
Symbol Min. Typ. Max.
Units
Conditions
315/316Y Luminous Intensity/Segment[1,2]
515/516Y (Digit Average)
IV
450 1800
µcd
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
V
F
2.0
583
586
2.5
V
nm
λPEAK
λd
nm
Reverse Voltage/Segment or DP[4]
V
R
3
50
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
Green
Device
Series
Test
HDSP-
Parameter
Symbol Min. Typ. Max.
Units
Conditions
315/316E Luminous Intensity/Segment[1,2]
515/516E (Digit Average)
IV
450 5000
µcd
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
V
F
2.1
566
571
2.5
V
nm
Peak Wavelength
Dominant Wavelength[3]
λPEAK
λd
nm
Reverse Voltage/Segment or DP[4]
V
R
3
50
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λ is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the
device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
AlGaAs Low Current
20
50.0
20.0
20
10
18
16
R
= 770°C/W
θ
J-A
10.0
5.0
5
14
12
10
8
2
1
2.0
1.0
0.5
6
0.5
4
0.2
0.1
2
0
0.1
0
0.5
1.0
1.5
2.0
2.5
0.1 0.2
0.5
1
2
5
10 20
20 30 40 50 60 70 80 90 100 110 120
V
– FORWARD VOLTAGE – V
I
– FORWARD CURRENT
PER SEGMENT – mA
F
T
– AMBIENT TEMPERATURE – °C
F
A
Figure 1. Maximum Allow able Average
or DC Current vs. Ambient
Temperature.
Figure 2. Forw ard Current vs.
Forw ard Voltage.
Figure 3. Relative Luminous Intensity
vs DC Forw ard Current.
6
HER, Yellow, and Green
100
100
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF I
DC
MAXIMUM
DERATING OF I
MAXIMUM
DC
10
10
3
KHz
1
DC OPERATION
1
DC OPERATION
1
10
t – PULSE DURATION – µs
p
100
1000
10000
1
10
100
1000
10000
t
– PULSE DURATION – µs
p
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration – Yellow .
Figure 4. Maximum Tolerable Peak
Current vs. Pulse Duration – HER.
50
100
R
= 770°C/W
θ
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
J-A
45
40
35
DERATING OF I
MAXIMUM
DC
30
25
20
15
10
HER
10
GREEN
YELLOW
5
0
1
DC OPERATION
90 100 110 120
20 30 40 50 60 70 80
1
10
100
1000
10000
t
– PULSE DURATION – µs
p
T
A
– AMBIENT TEMPERATURE – °C
Figure 6. Allow able Peak Current vs.
Pulse Duration – Green.
Figure 7. Maximum Allow able DC
Current per Segment as a Function of
Ambient Temperature.
100
80
12
10
HER
8
60
YELLOW
6
YELLOW
40
HER
4
GREEN
20
2
GREEN
0
0
0
1.0
2.0
3.0
4.0
5.0
0
5
10
15
20
25
30
I
– FORWARD CURRENT PER SEGMENT – mA
V
– FORWARD VOLTAGE – V
F
F
Figure 9. Relative Luminous Intensity
vs. DC Forw ard Current.
Figure 8. Forw ard Current vs.
Forw ard Voltage Characteristics.
7
HER Low Current
20
16
14
12
10
8
50
40
30
20
10
0
R
= 770°C/W
θ
J-A
18
16
HER
14
12
10
8
HER
6
HER
6
4
2
0
4
2
0
0
2
4
6
8
10 12 14 16
0
0.5
1.0
1.5
2.0
2.5
3.0
20 30 40 50 60 70 80 90 100 110 120
V
– FORWARD CURRENT PER SEGMENT – mA
V
F
– FORWARD VOLTAGE – V
F
T
– AMBIENT TEMPERATURE – °C
A
Figure 10. Maximum Allow able
Average or DC Current vs. Ambient
Temperature.
Figure 11. Forw ard Current vs.
Forw ard Voltage.
Figure 12. Relative Luminous
Intensity vs. DC Forw ard Current.
Intensity Bin Limits (mcd)
HER Low Current, AlGaAs Red Low Current
HDSP-31xL/H, HDSP-51xL/H
IV Bin Cat egory
Min.
0.180
0.280
0.450
0.700
1.100
1.800
2.800
4.500
7.000
Max.
0.360
0.560
0.900
1.400
2.200
3.600
5.600
9.000
15.000
E
F
G
H
I
K
L
M
N
HER Std. Current, Green Std. Current, Yellow Std. Current
HDSP-31xE/G/Y, HDSP-51xE/G/Y
IV Bin Cat egory
Min.
0.450
0.700
1.100
1.800
2.800
4.500
7.000
Max.
0.900
1.400
2.200
3.600
5.600
9.000
15.000
G
H
I
K
L
M
N
8
Color Categories
Dominant Wavelengt h (nm)
Color
Bin
Min.
Max.
Yellow
1
3
2
4
2
3
4
5
581.50
584.00
586.50
589.00
573.00
570.00
567.00
564.00
585.00
587.50
590.00
592.50
577.00
574.00
571.00
568.00
Green
Not e:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your local Avago
representatives for further clarification/information.
Electrical/ Optical
Soldering/ Cleaning
various solvents attack or dissolve
the encapsulating epoxies used to
form the package of plastic LED
parts.
For more information on
electrical/optical characteristics,
please see Application Note 1005.
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloro-
ethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
For further information on
soldering LEDs, please refer to
Application Note 1027.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
9
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5988-3204EN
5989-2640EN June 23, 2006
相关型号:
©2020 ICPDF网 联系我们和版权申明