AUM10W [ASTEC]
Ultra Low Profile DC - DC Module (Pb-free reflow compatible and ROHS Compliant); 超薄型DC - DC模块(无铅回流焊的兼容和RoHS )型号: | AUM10W |
厂家: | Astec America, Inc |
描述: | Ultra Low Profile DC - DC Module (Pb-free reflow compatible and ROHS Compliant) |
文件: | 总15页 (文件大小:302K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical Reference Note
Ultra Low Profile
AUM 10W Series
AUM 10W Ultra Low Profile DC – DC Module
(Pb-free reflow compatible and ROHS Compliant)
The AUM 10W series is Astec’s new Ultra Low Profile, 48Vin, SMT isolated single output modules with only 7.7mm
height. The series also comes with enhanced features such as Remote on/off (RC), parallel Application (PO), Power Good
(ALM), and the protection of OVP, OCP and UVLO.
Electrical Parameters
Input
Input range
Efficiency
36 – 60Vdc
89% @5Vo
Control
Enable
ON: RC pin connected to –Vin or Open
OFF: RC pin connected to +Vin
Output
Line / Load Regulation
Ripple and Noise
OVP
+/-5%
50mVp-p
120% of Vonom
(Latch-up)
OCP
3.1A for 1.5V –3.3V
2.1A for 5V
Special Features
LVP
90% of Vonom
(Latch-up)
1500VDC (1 minute)
•
•
•
Ultra Low Profile – 7.7mm height
Efficiency – 88% @ 5V
Isolation
-40 °C to +80°C Operating ambient temperature
(with 0.2m/s airflow)
Open Frame SMT
Low output ripple and noise
Regulation to zero load
•
•
•
CISPR22, Class A for Conduct and Radiated EMI
Parallel Application
UL/cUL 1950, CE Mark
•
•
•
•
Pb-free reflow compatible and ROHS Compliant
SHEET 1 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
AUM 10W Ultra Low Profile Series
THIS SPECIFICATION COVERS THE REQUIREMENTS
Vout,Iout
MODEL NAME
AUM03M48
AUM03Y48
AUM03G48
AUM03F48
AUM02A48
SIS CODE
AUM03M48
AUM03Y48
AUM03G48
AUM03F48
AUM02A48
1.5V @ 3A
1.8V @ 3A
2.5V @ 3A
3.3V @ 3A
5V @ 2A
SHEET 2 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
Electrical Specifications
STANDARD TEST CONDITION on a single unit, unless otherwise specified.
TA:
25°C (Ambient Air)
36 – 60Vdc
Return for +Vin
Open
Connect to load
Return for +Vo
Open
+Vin (P1-2):
-Vin (P3):
RC (P15):
+Vo (P5-6):
-Vo (P7-8):
PO (P16):
ALM(P9-10):
Open
ABSOLUTE MAXIMUM RATINGS
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional
operation of the device is not implied at these or in any other conditions in excess of those given in the operational
sections of the specs. Exposure to absolute maximum ratings for extended periods can adversely affect device
reliability.
Parameter
Device
Symbol
Min
Typ
Max
Unit
Input Voltage
Continuous
Transient (200ms, 42V/10/ms rate)
VIN
VIN,trans
36
-
-
-
60
90
Vdc
Vdc
Operating Temperature (with
0.2m/s airflow)
-40
80
ºC
Storage Temperature
Operating Humidity
All
All
TSTG
-
-40
10
-
-
90
95
ºC
%
INPUT SPECIFICATIONS
Parameter
Device
Symbol
Min
Typ
Max
Unit
Operating Input Voltage
VIN
36
48
60
Vdc
Turn-on Voltage
Turn-off Voltage
33.6
36
Vdc
Vdc
31.92
33.6
Maximum Input Current2
All
IIN,max
-
-
0.5
A
(VIN = 0 to VIN,max; IO = IO,max
)
Note: 1. This power module is not internally fused. The use of an input line fuse (GMA-10A Bussman fuse or
equivalent) is recommended.
2. The value is static only and rated for UL/cUL safety. In-rush current to charge internal capacitors is not
specified.
SHEET 3 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
OUTPUT SPECIFICATIONS
Parameter
Output Voltage Setpoint
(VIN=VIN,min to VIN,max at
Device
Symbol
VO,SET
VO,SET
VO,SET
VO,SET
VO,SET
Min
Typ
1.5
1.8
2.5
3.3
5.0
Max
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
AUM03M48
AUM03Y48
AUM03G48
AUM03F48
AUM02A48
IO=IO,max
)
Output Regulation:
Line: VIN=VIN,min to VIN,max
All
All
-
-
-5
-5
-
-
+5
+5
%
%
Load: IO=IO,min to IO,max
Output Ripple and Noise
Peak to Peak: 5Hz to 20MHz
-
-
-
-
50
mVPK-PK
³ 2.5V
Output Current Range
1.5V
1.8V
2.5V
3.3V
5.0V
IO
IO
IO
IO
IO
0
0
0
0
0
3
3
3
3
2
A
A
A
A
A
Output Current Limit Inception3
1.5V
1.8V
2.5V
3.3V
5.0V
IO
IO
IO
IO
IO
-
3.1
3.1
3.1
3.1
2.1
-
A
A
A
A
A
Over Voltage Protection
Low Voltage Protection
All
All
120
90
%Vo
%Vo
Efficiency
Ta = 25ºC. Vin =48V, Io=Iomax
1.5V
1.8V
2.5V
3.3V
5.0V
73
75
79
81
83
78
80
84
86
88
-
-
-
-
-
%
%
%
%
%
h
h
h
h
h
Note: 3. This feature is only for module protection and is not intended for customer application. The value is
specified at 25C ambient air temperature.
SHEET 4 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
OUTPUT SPECIFICATIONS (Continued)
Parameter
Device
Symbol
Min
Typ
Max
Unit
Switching Frequency
1.5V
1.8V
2.5V
3.3V
5.0V
-
-
-
-
-
-
-
-
-
-
770
770
770
770
770
-
-
-
-
-
KHz
KHz
KHz
KHz
KHz
Dynamic Response:
Slew Rate
All
All
All
All
-
-
0.3 x Io /
100uS
-
-
DIO/Dt
A/ms
%VO
%VO
ms
Load Change: 50% - 100% IO,max
Load Change: 100% to 50% IO,max
-
-
-
10
-
-
-
10
Turn-On time (Input to Output)5
IO = Iomax; VIN = VIN,nom
to VO,nom
15
250
Note: 5. Input to Output Turn-On time is defined as the difference between t1 and t2: where t1 is the time
when the input voltage reaches the minimum VIN (VIN = VIN,MIN) and t2 is the time when the output
voltage reaches it's specified range (VO = VO,SET-Min).
ISOLATION SPECIFICATION
Input to Output Isolation: 1500Vdc (1 minute)
SAFETY APPROVAL
The AUM (10W) is certified under the following agencies:
·
UL/cUL 1950, and CE Mark.
The module shall not be considered approved and carry safety agency logos until this has been authorized by
Safety and QA / QC management.
SHEET 5 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
Basic Operation and Features
Over Current Limit Inception (OCP)
The Isolated DC-DC converter limits output current when the current is over the maximum output current due to
abnormality such as overload or short circuit. When over current condition continues and output voltage decreases to the
point of low voltage protection, the DC-DC converter will be in latch up mode. To restore the output, remove the
abnormality and re-set the input voltage under 5V for 1 second minimum.
Over Voltage Protection (OVP)
The Isolated DC-DC converter stops the operation when the output voltage is over the specified Over Voltage Protection
point, the converter will be in latch up mode after 0.5ms*. To restore the output, re-set the input voltage under 5V for 1
second minimum.
Notes*: Output voltage might exceed the point at which OVP starts to function under the specific condition of transient
input voltage or output current change. Therefore, OVP is set to wait for the mask time 0.5ms.
Low Voltage Protection (LVP)
If output voltage is under the specified Low Voltage Protection point, the converter will halt the operation. After typical
500ms mask period, the converter will be in latch up mode. To restore the output, re-set the input voltage under 5V for 1
second minimum.
Remote On/Off Control (RC)
If RC pin is open or connected to –Vin, the converter is turned on. If RC is connected to +Vin, the converter is turned off.
Alarm Output (ALM)
The Alarm output will be down to the –Vin level (Open Drain Output) at the condition of Over Voltage Protection or Low
Voltage Protection. The maximum sink current in ALM pin is 10mA. When operating in parallel application, all operating
units can be simultaneously halt by connecting all the ALM pins together, in the condition of Over Voltage Protection or
Low Voltage Protection caused by any single converter. Maximum number for parallel operation is 10 units
Synchronous Turn On/Off
Connect the PO (parallel Operation) pins of all operating units together will synchronize the turn on / off time in parallel
application.
MODULE PIN ASSIGNMENT
PIN #
P5,6
P7,8
P9,10
P15
P16
P1,2
P3
DESIGNATION
+Vo
-Vo
ALM
RC
PO
+ Output
- Output
Alarm Output
Remote On/Off
Parallel Operation
+ Input
+Vin
-Vin
- Input
SHEET 6 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
Performance Curves
Efficiency at 25C
Efficiency at 25C
100
80
60
40
20
0
100
80
60
40
20
0
Vin=36V
Vin=48V
Vin=60V
Vin=75V
Vin=36V
Vin=48V
Vin=60V
Vin=75V
0
1 Iout (A) 2
3
0
1 Iout (A) 2
3
Efficiency vs. Load Current Curves for 1.5Vo
Efficiency vs. Load Current Curves for 1.8Vo
Efficiency at 25C
100
Efficiency at 25C
100
80
80
Vin=36V
Vin=36V
Vin=48V
60
Vin=48V
60
Vin=60V
Vin=60V
40
40
Vin=75V
Vin=75V
20
0
20
0
0
1 Iout (A) 2
3
0
1 Iout (A) 2
3
Efficiency vs. Load Current Curves for 2.5Vo
Efficiency vs. Load Current Curves for 3.3Vo
Efficiency at 25C
100
80
60
40
20
0
Vin=36V
Vin=48V
Vin=60V
Vin=75V
0
0.5
1
1.5
2
Iout (A)
Efficiency vs. Load Current Curves for 5.0Vo
SHEET 7 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
AUM Power derating
at 60C
100
75
50
25
0
Air V = 0m/s
Air V=0.2m/s
25% at 80C
-40
-20
0
20
40
60
80
Ambient Temp (C)
Derating Curve for the AUM Series
SHEET 8 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
Typical Application Circuit
A) Single Operation
+Vin
-Vin
+Vout
-Vout
GND
-48V
Load
Fuse
PO
RC
SW
ALM
SW Open : Enable DC-DC
converter
Figure 1
B) Parallel Operation (A single power supply connects to multiple DC-DC converters to apply for higher output
current more than rated one from a DC-DC converter)
GND
-48V
+Vin
-Vin
PO
+Vout
-Vout
Fuse
SW
RC
ALM
Load
+Vout
+Vin
-Vin
-Vout
PO
RC
ALM
SW Close : Halt all DC-DC converter
with RC connected together
Maximum units in parallel: 10pcs
Figure 2
i) All PO pins should be connected together
ii) All DC-DC converters with ALM pins connected will stop the operation when one single converter is halted in
mode protected by LVP or OVP.
iii) LED is optionally connected to ALM pin for the notice of DC-DC converter stoppage.
SHEET 9 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
C) Multiple Operation: A single power supply connects to multiple DC-DC converters to individually distribute
output current to multiple independent loads.
+Vin
-Vin
PO
+Vout
-Vout
Fuse
RC
ALM
+Vout
-Vout
+Vin
-Vin
PO
RC
ALM
SW Close : Halt all DC-DC converter
with RC connected together
Figure 3
i) All DC-DC converters with ALM pins connected will stop the operation when one single converter is halted in
mode protected by LVP or OVP.
ii) LED is optionally connected to ALM pin for the notice of DC-DC converter stoppage.
SHEET 10 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
D) complex parallel and multiple (Sequence start-up): Two converters supplying the same output voltage for a
single load and another converter supplying the different output voltage for another load.
Converter No.1
+Vin
-Vin
PO
GND
-48V
+Vout
-Vout
Fuse
RC
SW2 SW1
ALM
Load
Converter No.2
+Vin
-Vin
PO
+Vout
-Vout
RC
ALM
Converter No.3
+Vin
-Vin
PO
+Vout
-Vout
RC
ALM
SW1 Close : Halt DC-DC converter No.1 and 2
SW2 Close : Halt DC-DC converter No.3
Figure 4
i) PO pins of the converters supplying the same output voltage are connected to the others and another PO pin of the
different output voltage converter is not connected.
ii) All three DC-DC converters, which are connected to ALM pins, stop their operation when a single one is halted in
mode protected by LVP or OVP.
iii) LED is optionally connected to ALM pin for the notice of DC-DC converter stoppage.
SHEET 11 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
Mechanical Specifications
<TOP VIEW>
Marking of No.1 pin
16
15
1
PO
RC
+Vin
2
3
-Vin
A B C D
AUM0 E F 48
5
6
INPUT=36-60VDC
G . H V J A
OUTPUT=
+Vout
-Vout
10
9
7
8
ALM
2
35.3+-0.2
37.7+-0.4
Suffix
0 to 10 deg.
1.2+-0.2
0.5+-0.1
Coplanarity Max0.1mm
Enlarged Lead Pin
Pin No
1,2
3
5,6
7,8
Symbol
+Vin
-Vin
+Vout
-Vout
Function
+Input
-Intput
+Output
-Output
Pin No Symbol Function
9,10
15
ALM
RC
Alarm output
Remote on/off control
Parallel operation
16
PO
Notes: A : Factory symbol
B : The last number of production year
Example: 2 stands for 2002
C : Production month
D : Blank
(1,2,3,..…,9,O, N, D)
E: Output current symbol
F: Output voltage symbol
G, H: Output voltage
J: Output current
Unit Weight: 7.3g
SHEET 12 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
PACKING AND SHIPPING
Trays
Tray Dimensions
Unit : mm
General tolerance : +-1.5
2 0 0
4 2 .5 5
P 2 = 3 8 .3
P2
P2
B
B '
1 1 .0
1 6 1 .9
2 9 .4
B-B 'cross section
SHEET 13 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
Maximum pieces per a tray : 20pcs/tray
Package
Corrugated cardboard box contains trays with products. Tray is heaped with alternately opposite direction to prevent
products from contacting against the bottoms of trays.
Dummy tray
Trays containing products
Bottom sheet of corrugated card board
(310)
Label
(210)
ASTEC Products
Corrugated card board box
Numerals in parentheses are reference only.
Unit : mm
Label written by
: Part Number,
: Quantity,
: Inspection Number,
: CE mark
SHEET 14 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
Technical Reference Note
Ultra Low Profile
AUM 10W Series
Reflow Soldering Information
Soldering
I) Flux
Solder the products with Rosin Flux (0.2wt%. chloride or less).
Do not use acid or soluble flux, because they may damage metallic parts and glass
parts and may cause defective or reduce quality.
II) Solder
SnAgCu solder compatible
III) Condition of Soldering – Recommended soldering profile (J-STD-020C):
Reflow Profile
Preheating
Peak temperature :
:
:
Infrared or air blow
150 – 200 deg C for 60 to 150sec
240 ± 5 deg C at surface.
20 – 60sec
Maximum period above 220deg.C :
Ramp rate
:
lower than 4 deg C / sec
Max 2 times (see below recommendation) .
Times
:
Recommendation
Do not give vibration to products while solder melts under reflow process.
Please handle to wait for products cooled down enough.
Please don’t reflow a motherboard mounted the products on the lower side such as a
below figure, because the products surely fall down from the motherboard.
Motherboard
Isolated DC-DC converter
Recommend Storage Condition
Maximum storage period:
Storage condition:
6 months
30 deg C, 60%RH
Recommend baking the module at 100degC for 24 hours if storage period is longer than 6 months.
SHEET 15 OF 15
MODEL : AUM 10W SERIES
April 05 REVISION 02
相关型号:
AUMC293-AEDR-4F
Card Edge Connector, 244 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, Socket, LEAD FREE
FOXCONN
AUMC297-AEDR-4F
Card Edge Connector, 244 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, Socket, LEAD FREE
FOXCONN
©2020 ICPDF网 联系我们和版权申明