3560 [ASM-SENSOR]
AC mΩ HiTESTER; AC毫欧测试仪型号: | 3560 |
厂家: | ASM GMBH |
描述: | AC mΩ HiTESTER |
文件: | 总4页 (文件大小:1027K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3560 AC mΩ HiTESTER
Components measuring instruments
Contact resistance meter with high-speed response
Meeting measurement requirements from contact
resistance to internal resistance and voltage of batteries.
This contact resistance meter complete with comparator function
and external interface utilizes the principles of the AC 4-terminal
method that gives priority to line use and allows measurement
offering high speed, high accuracy and high resolution.
External output terminal, external control terminal and RS-232C
interface are standard features. GP-IB interface and printer
interface are optionally available. The instrument also features
an Ω and V mode that offers simultaneous measurement and
comparison of battery internal resistance and open-circuit voltage,
making it highly suitable for battery inspection lines as one unit
can act as both a low-resistance meter and DMM.
1
Rapid response time - approximately 84 ms (60 Hz)
■ Intuitive Operation Interface
2
1
3
4
5
6
7
8
9
1. HOLD button (press to hold the measurement value on the display, as well
as to control measurement using the trigger)
VIEW button (press to check comparator conditions using a one-touch
operation, as well as to set the power supply frequency)
Executes zero adjustment and switches the buzzer ON/OFF
2. COMP button (press to switch the comparator ON/OFF, as well as to enter condition
setting mode)
COMP No. button (press to select the comparator table and result output trigger)
3. Clearly visible display employing fluorescence display tube
4. Switches between the resistance and resistance/voltage measurement modes
5. Switches the auto range or the open terminal voltage limiter ON/OFF
6. Raises the range and switches the sampling rate
7. Lowers the range and switches between the RS-232C and the
GP-IB interface mode
8. Switches the voltage range, and the sense check function ON/OFF
9. External hold terminal
Features
High-resolution measuring
● Fast measurement and fast quality determination
In the FAST mode, the instrument performs lightening fast
measurements at 60 times/sec with a response time of about 84
ms (at 60 Hz) to reduce the line tact time. This helps increase
mass-production efficiency. The comparator has memory for
30 configuration tables which enables one unit to perform
quality determination of many measurement objects all having
different characteristics.
●
High-resolution measurement of 1 µΩ in the 30 mΩ range.
Sense check function for prevention of erroneous
measurements
Earlier instruments only perform sense check on the source
side, but the 3560 unit also conducts a check on the sense
side to guarantee against erroneous measuring and wrong
evaluation.
●
● Low-power resistance measurement
Conduct low power resistance measurements according to the
IEC 512-2 standard. Accurately measure contact resistance
without destroying the oxide film on contact surfaces of
components such as relays and connectors.
PC interfaces
●
RS-232C interface and external control terminal are standard
features. Printer interface and GB-IP interface are available as
options.
● Battery measurement
Comfortable operation
●
Since DC voltage measuring can be performed simultaneously,
the 3560 can also be applied to measure open-circuit voltage
of batteries. One unit can measure both internal resistance
and open-circuit voltage for complex quality evaluation.
Furthermore, using the voltage limiter OFF function enables
even more stable measurement of battery internal resistance.
The number of switch operations has been reduced to achieve
simple and intuitive operation.
Versatile array of leads
●
A wide selection of test leads, such as clip leads, pin leads and
4-terminal leads, are available, allowing you to select the most
suitable type for the component to be measured.
■ Comparator Function
Two settings are available in the resistance measurement
mode: the upper limit and lower limit value settings. In the
low-resistance and voltage measurement mode, the upper limit
and lower limit value settings can be made separately for the
two measurement items. When both are determined as IN,
PASS is indicated, in other cases FAIL is indicated. In addition
to the Hi/IN/Lo and PASS/FAIL indications, the results can
also be signaled by a buzzer and output via an open-collector
output.
Resistance comparator value setting
Voltage comparator value setting
■ Comparator setting example
Resistance range 300 mΩ (upper
limit value 180.00 mΩ/lower limit
value 170.00 mΩ), voltage range 5
V (upper limit value 3.8000 V/lower
limit value 3.5000 V), Table No.1,
buzzer set to sound for PASS.
Up to 30 comparator configuration tables can be memorized,
each storing settings for a measurement mode, measurement
range, upper and lower limit values and a buzzer mode.
Buzzer mode setting
2
High-Speed Measurement Contributing to
Super Efficient Production Lines
■ Designed for System Use
Utilize the built-in external control terminal to select the
comparator table, as trigger and for requesting printout, etc.
Power button
Built-in RS-232C
The external output can be used for output of comparator
results, measurement completion (EOC) and NG output. These
external input and output capabilities have been designed with
systems integration in mind.
Timing Chart Example
The following shows a timing example for reading out the
comparator results using the HOLD function and external
input and output features.
External control terminal
External output terminal
GP-IB or printer interface
Nature of external control and outputs (negative logic)
● Control
(CMOS/5 V max.)
•Measurement trigger (TRIG)
•Comparator output request (MANU)
•Zero adjustment request (0 ADJ)
•Print request (PRINT)
● Output
(Open-collector output/35V - 50mA max.)
•Comparator result signals (Hi, IN,
Lo/PASS, FAIL)
•Measurement termination signal
(EOC)
•Comparator table selection (COMP)
•EXT.DCV (DC5V - 24V)
•Measurement irregularity detection
signal (NG)
•GND
t1: Approx. 80 ms (FAST 60 Hz), approx. 660 ms (MEDIUM 60 Hz), approx. 1.6s (SLOW 60 Hz)
Approx. 95 ms (FAST 50 Hz), approx. 795 ms (MEDIUM 50 Hz), approx. 1.92s (SLOW 50 Hz)
Switch between automatic and manual output of comparator results
(set using panel buttons)
In the AUTO mode, the comparator results are continuously output. In the MANU mode,
t2: Approx. 5 ms
t3: Approx. 1 ms
the results are only output when the external MANU and GND terminals are shortened.
In the HOLD mode, the sequence is simple as EOC is retained until the next
trigger is input. Furthermore, the display and output are retained until the
next EOC is entered.
● MANU mode
t1: [Stabilizing time] Following chuck, the trigger is input after the
measuring current has stabilized.
t2: [Detection time]
Time from when chuck is detected until the NG
signal becomes Lo.
* t1 and t2 differ with the measured object. The figures are reference values in case
of pure resistance.
RS-232C Interface Specifications
t3: [Evaluation time] The time from when the measurement value is
judged at the point when the trigger is input and until
the EOC signal is output. The comparison result is
decided on the rising edge of EOC. At this point, the
evaluation result is obtained.
Transmission method: Start-stop synchronization, full duplex.
Transmission speed: 9600 bps. Data length: 8 bits. Parity: None. Stop
bit: 1 bit. Handshake: Hardware. Delimiter: CR+LF. Connecting cable:
D-Sub 9-pin female/female connector. Reverse connection.
■ External Interfaces (Options)
Print example
Install the optional 9588 GP-IB interface to gain full remote
control of the instrument from a PC. Add the 9589 Printer
Interface to enhance the device with printing capabilities via
the 9203 Digital Printer or your own Centronics-based printer.
Connecting the 9203 provides multi-function printing, such
as interval printing, statistical processing of maxima, minima,
average, standard deviation, histogram and graph printing.
9588 GP-IB Interface Specifications
Conforming standard: IEEE-488.1 1987/Reference standard: IEEE-488.2 1987
Resistance value histogram
9203 Digital Printer Specifications
● Printer type: Thermal Line Printer
● Statistical processing: Up to 99,999
data points
● Histogram and graphics: Up to 5,000
data points
● Dimensions and mass: Approx. 215
(W)×160 (H)×54 (D)mm ,1kg / [8.5" (W)
× 6.3" (H) × 2.1" (D) , 35.3 oz.]
*Note: For further details, please refer to
the product catalog for the HIOKI
3550 Battery HiTESTER series, or
click onto our website at http://
www.hioki.co.jp.
Statistical processing
Resistance value graph printout
3
■ Specifications
Measurement method: Resistance AC (1kHz ± 0.2Hz) 4-terminal method
• Buzzer output:
[Resistance measurement mode]: Switchable between Hi, Lo and IN.
[Resistance/voltage measurement mode]: Switchable between PASS and FAIL.
(ON/OFF setting possible)
A/D method:
Display:
∑-∆ method with sample hold function
Fluorescent character display tube.
Resistance [31000], voltage [50000] counter
Provided (disabled when comparator is ON)
" OF " display
Maximum input voltage: DC 60 V max. (AC input is not possible)
Withstand voltage: Between power supply line and protective ground terminal /
AC 2.3 kV rms for 1 minute
Auto-ranging:
External output terminals: [Open-collector output] (DC 35V-50mA max.)
comparator results, measurement termination, measurement
irregularity signal
Input overrange:
Measurement irregularity: " ---- " display (NG: External output of measurement irregularity signal)
Sampling rate:
External control terminal: [CMOS input] Measurement trigger, comparator trigger,
printer, zero-adjustment, comparator number selection,
external power supply possible (DC 5 V to 24 V)
50 Hz
60 Hz
[FAST]
[MEDIUM]
[SLOW]
50 times/s
6.25 times/s
1.56 times/s
60 times/s
7.52 times/s
1.88 times/s
Interfaces:
RS-232C (standard), GP-IB or printer interface [Centronics]
(option)
Response time:
50 Hz
100 ms
800 ms
1.92 s
60 Hz
84 ms
667 ms
1.60 s
Environment conditions: Operating temperature and humidity range: 0 to 40˚C (32˚F
[FAST]
[MEDIUM]
[SLOW]
to 104˚F) , 80% RH or less.
(no condensation)
Storage temperature and humidity range: -10 to 50˚C (14˚F
to 122˚F) , 80% RH or less.
Operating conditions: Indoors, below an altitude of 2000 m.
(When non-conductive resistance is measured. The response time
differs depending on the measured object.)
Power supply:
AC 100V to 240V (±10%), automatic voltage selection, 50/60Hz
Comparator:
Comparator output (Resistance/voltage measurement mode)
Maximum rated power: 30 VA
Resistance
Dimensions and mass: 215(W) × 80(H) × 320(D)mm, 2.1kg / [8.5"(W) × 3.1"(H) ×
Hi
IN
Lo
Voltage
12.6"(D), 74.1 oz.] (not including options)
Hi
IN
Lo
FAIL (red)
FAIL (red)
FAIL (red)
Included accessory:
9287-10 CLIP TYPE LEADS (1)
FAIL (red) PASS (green) (FAIL) (red)
FAIL (red) FAIL (red) FAIL (red)
Conforming standards: EMC
EN61326:1997+A1:1998+A2:2001
EN61000-3-2:2000
* Restricted to Hi, IN, Lo in the resistance measurement mode.
EN61000-3-3:1995+A1:2001
EN61010-1:2001
Pollution degree: level 2
Safety
• Mode switch:
Switchable between AUTO and MANU.
• Comparator points: Up to 30 comparator condition settings can be memorized.
˚C ˚C
Conditions for guaranteed accuracy: at 23 ±5 [73.4˚F ±9˚F], 80% RH (no condensation), following 30 min.
warming-up, and after zero adjustment
■ Measurement Ranges
[Resistance measurement] (Sampling speed : SLOW)
[Voltage measurement] (Sampling speed : SLOW)
Range
Maximum
display value
30mΩ
31.000mΩ
1µΩ
300mΩ
310.00mΩ
10µΩ
3Ω
3kΩ
3.1000kΩ
100mΩ
1.5µA
30Ω
31.000Ω
1mΩ
300Ω
310.00Ω
10mΩ
5µA
Range
Maximum
display
DC 5V
±5.0000V
100µV
DC 50V
±50.000V
1mV
3.1000Ω
100µΩ
100µA
Resolution
Measurement
current
Resolution
Accuracy
Temperature
modules
7.4mA
1mA
10µA
±0.05%rdg. ±5dgt. ±0.05%rdg. ±5dgt.
˚C
±0.5%rdg.±8dgt.
* In the case of MEDIUM: Add 3 dgt. to the above dgt. error
FAST: ±0.5% rdg. ±8 dgt. (30 mΩ)/±0.5% rdg. ±6 dgt. (other ranges)
However, in the case of FAST, the display counter decreases 4 digits in all ranges.
(±0.005% rdg. ±0.5 dgt.)/ (1.8˚F)
Accuracy
* MEDIUM: Add 3 dgt. to the accuracy dgt. error
FAST: Add 5 dgt. to the accuracy dgt. error
* During charging, the measurement value may be unsteady due to
ripple voltage.
* Resistance with inductance elements may not always be
measurable.
Temperature
modules
Open-terminal
voltage
˚C
˚C
(±0.05% rdg. ±0.8 dgt.)/ (1.8˚F) *FAST: 300m to 3k range (±0.05% rdg. ± 0.6 dgt.)/ (1.8˚F)
Ω
20 mV peak max. (when limiter is ON)
9287-10 (included)
9452
9453
9455
3560 AC mΩ HiTESTER
same appearance
as 9461
0.8 dia.
● Options
Tip
Current side
9452 CLIP TYPE LEADS
magnified
view
Voltage side
0.2/0.2 dia.
9453 FOUR TERMINAL LEADS
9454 ZERO ADJUSTMENT BOARD (for 9461,9465)
9455 PIN TYPE LEADS (for high-density use)
9461 PIN TYPE LEADS
Approx. 80 cm
between connectors,
and 20 cm between
probes
Approx. 80 cm
between connectors,
and 30 cm between
probes
Approx. 85 cm
between connectors,
and 8 cm between
probes
Approx. 40 cm
between connectors,
and 25 cm between
probes
9465 & 9466
9454
9461
9467
9465 PIN TYPE LEADS
9466 REMOTE CONTROL SWITCH
9467 LARGE CLIP TYPE LEADS
9770 PIN TYPE LEADS
9771 PIN TYPE LEADS
9588 GP-IB INTERFACE
9151-02 GP-IB CONNECTION CABLE (2 meters)
9151-04 GP-IB CONNECTION CABLE (4 meters)
9589 PRINTER INTERFACE
For zero-adjustment
when 9461 or 9465 is
used.
Approx. 40 cm
between connectors,
and 25 cm between
probes
Cable length :
Approx. 85 cm between
connectors, and 25 cm
between probes, 29 mm
dia.
connectors to lead
branch approx. 1.7m,
lead branch to probes
approx. 10 cm
*
Non CE mark.
*
9770/9771
9770 -- in detail 9771 -- in detail
9203 DIGITAL PRINTER
9425 CONNECTION CORD (20-pin half-pitch—36pin/D-sub)
[for connecting the 3560 to the 9203/2meters]
Cable length:
connector to fork
40cm, fork to probes
25cm
0.6 mm dia.
1.8 mm dia.
0.2 mm
2.2 mm
9233 RECORDING PAPER (for the 9203/10meters,10rolls)
DISTRIBUTED BY
HEAD OFFICE :
Shanghai Representative Office :
1310 Shanghai Times Square Office
81 Koizumi, Ueda, Nagano, 386-1192, Japan
TEL +81-268-28-0562 / FAX +81-268-28-0568 93 Huaihai Zhong Road
E-mail: os-com@hioki.co.jp
Shanghai, 200021, P.R.China
TEL +86-21-6391-0090, 0092
FAX +86-21-6391-0360
E-mail: info@hioki.cn
HIOKI USA CORPORATION :
6 Corporate Drive, Cranbury, NJ 08512 USA
TEL +1-609-409-9109 / FAX +1-609-409-9108
E-mail: hioki@hiokiusa.com
All information correct as of Mar. 3, 2006. All specifications are subject to change without notice.
3560E3-63B-03K Printed in Japan
相关型号:
3560-10SR(50)
Telecom and Datacom Connector, 10 Contact(s), Female, Right Angle, Surface Mount Terminal, Locking, Receptacle, ROHS COMPLIANT
HRS
3560-10SR(61)
Telecom and Datacom Connector, 10 Contact(s), Female, Right Angle, Surface Mount Terminal, Locking, Receptacle,
HRS
3560-16S(50)
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Surface Mount Terminal, Locking, Receptacle, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明