3239 [ASM-SENSOR]
DIGITAL HiTESTER; 数字测试仪DIGITAL HiTESTER
(4-terminal Ω function)
3239
(Advanced model)
3238
(Economically priced)
Field measuring instruments
3237
Outstanding performance for production lines with a sampling rate of 3.3 ms
High-speed DMM
The DIGITAL HiTESTERs 3237, 3238, and 3239 can perform 3.3 ms high-speed sampling, and come
equipped with a comparator, external input and output, and an RS-232C interface. These three high-
performance DMMs can be used not only in laboratories, but in production lines that require the minimal
tact time.
The 3237 is the basic model, and is equipped with the basic necessary functions. The 3238 is a high-
precision, broadband model that also features current measurement terminals and a frequency measurement
function. The 3239 includes the functions of the 3238 plus the 4-terminal resistance measurement function.
All three units are designed with emphasis on measurement speed and safety.
1
3.3 ms/sample
High-speed Performance and Reliability
■ Features
Sampling speed Values in the ( ) show samples/second.
Frequency
50 Hz
FAST*
MEDIUM
SLOW
■
■
■
Samples at rates of up to 300 samples/sec. (3.3 ms/sample)
Comparator function provides high-speed pass/fail evaluation
Equipped with external input and output for sequence control
3.3 ±1 ms (300) 130 ±5 ms (8) 1,040±50ms (1)
3.3 ±1 ms (300) 108 ±5 ms (9) 1,080 ±50 ms (1)
60 Hz
* Approximately 55 ms required for self-calibration at 30-minute intervals.
Does not apply at resistances higher than 2MΩ, or LPΩ higher than 200kΩ (see page 5).
For the 3238 and 3239's frequency function gate time, see page 5.
■ Usefull Save/Load function helps work go faster
The 3237, 3238 and 3239 are equipped with a variety of
■ True RMS value measurement
Both the 3237 and 3238 use true RMS measurement
for determination of distorted waveforms. In fact, HIOKI
guarantees accuracy of the 3238 and 3239 for AC voltage of
functions that help minimize tact time in production lines.
For details, see page 2.
10 Hz to 300 kHz, and AC current of 10 Hz to 30 kHz.
■ Low power resistance measurement function
prevents sample deterioration
For specifications, see pages 5 and 6.
The 3237, 3238 and 3239 use a low power Ω function to
minimize sample degradation when measuring resistance.
With this function, open terminal voltage never goes over 0.45
■ Interface supports full remote operation
Measurement can be automated by using a controller to operate
the 3237 or 3238 through the GP-IB or RS-232C interface.
V DC, and measurement current never surpasses 100 µA DC.
For specifications, see pages 5 and 6.
For details, see page 3.
■ Select from 3 types of units
The basic and economical
The high-accuracy & multi-functional
3237
3238
✓
✓
DC V basic accuracy: ±0.01% rdg.±2dgt.
✓
DC V basic accuracy: ±0.025% rdg.±2dgt.
Includes frequency measurement for AC and DC A
DC voltage
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
For 4-terminal resistance measurement
[5 ranges, 199.999 mV to 1000.00 V]
3239
AC voltage
[4 ranges, 1999.99 mV to 700.00 V]
✓
✓
DC V basic accuracy: ±0.01% rdg.±2dgt.
Resistance
All the functions of the 3238, plus 4-terminal Ω measurement
[7 ranges, 199.999 Ω to 100.000 MΩ]
2-terminal
2-terminal
Resistance LP
[4 ranges, 1999.99 Ω to 1999.99 MΩ]
■ Reliable resistance measurement
Continuity check
using the 4-terminal measurement method
[A buzzer sounds when resistance is less than 50.00 Ω]
Diode check
Using 4-terminal resistance
measurement, which is
unaffected by variables
such as measurement lead
wiring resistance, the
3239 displays outstanding
resistance measurement
capabilities.
[Anode-cathode voltage in the 1999.99 mV range]
Current measurement by
clamp sensor
AC/DC current
[2 ranges, 199.999 mA and 1999.99 mA]
Frequency
[5 ranges, 99.9999 Hz to 300.000 kHz]
Resistance
[5 ranges,199.999 Ω to 1999.99 kΩ]
4-terminal
4-terminal
Resistance LP
[4 ranges,1999.99 Ω to 1999.99 MΩ]
For clamp specifications, see page 4
For DIGITAL HiTESTER specifications, see pages 5 and 6
2
Minimizing tact time
with sequence control
High-speed comparator and external input/output
Connector used: 57RE-40360-730B (D29) (DDK Ltd.)
Conforming connector: ADS-HC360001-010 (Honda Tsushin Kogyo Co., Ltd.),
RC30-36P (Hirose Electric Co., Ltd.) and other suitable connectors
■ EXT.I/O
Loading of saved settings from panel……LOAD 0 to 4
Measurement start trigger input…………TRIG
Measurement end signal output…………EOC
Comparator output…………………………Hi, IN, Lo
Internal power supply +5 V (max. 50 mA)……INT. DC V
Internal GND………………………….………INT. GND
Input type: CMOS level
Signal voltage: Hi 3.8 V to 5.0 V, Lo 0 V (shorted) to 1.2 V
Logic: Negative logic (Low active)
Output type: Open collector
Applied voltage: Max. 35 V DC, 50 mA
Logic: Negative logic (Low active)
With free running measurement
●
Comparator with external output
You can set the upper and lower limits, and display one of 3
results: Hi, IN or Lo. In addition to LED and buzzer results,
open collector output results are provided through the external
input/output terminals.
X: measurement value, H: Upper limit, L: Lower limit
X > H…………………………Hi
>
>
L
H
X
…………………IN
L > X………………Lo
Time
MIN.
TYP.
MAX.
…
Measurement trigger pulse width
Trigger delay time
…
T1
T2
500 µs
W i t h e x t e r n a l c o n t r o l
See below
Sampling time
using external
control
FAST
MEDIUM
SLOW
See the table
T3
at the top right of page 1.
Internal operation time
…
2.0 ms
…
500 µs
…
…
T4
T5
From the end of measurement
until the next trigger
FAST
for free running MEDIUM
…
…
…
1.7 ms
50 ms
500 ms
…
…
…
EOC Lo level time
T6
T7
measurement
SLOW
FAST
Sampling time
See the table
at the top right of page 1.
for free running MEDIUM
measurement
SLOW
■
Save/Load function for rapid response to various
work situations
■ A trigger delay designed for measurement safety
The 3237, 3238 and 3239 are equipped with a trigger delay
function that can be set to manual or automatic for the time
period between trigger input and the display of the comparator
result (see T2 in the figure above).
You can save and recall a maximum of 30 DMM setting
conditions for various range and comparator values.
Manual settings: Designate periods in terms of millisecond intervals between 0.000 s and 9.999 s
Automatic settings:
FAST
3 ms
500 ms
3 ms
MEDIUM
3 ms
800 ms
3 ms
SLOW
3 ms
1.5 s
DC V
AC V
Ω (200Ω to 200 kΩ)
3 ms
3
Automation of
Line Inspection
Available interfaces
■
GP-IB (option –01 specifications)
■ RS-232C (standard)
Purpose: Remote control and measurement value output
Standards conformance
:
IEEE -488.1 1987
Purpose: Remote control and measurement value output
Reference standard
Transmission speed
(reference data)
: IEEE –488.2 1987
Transmission system
Transmission speed
Data bit length
Stop bits
: Asynchronous method Full duplex
: 9600 bps (fixed)
FAST MEDIUM SLOW
1,m08s 0
: 8 bits
Transmission
speed
Power line frequency: 60Hz
108 ms
7.0 ms
: 1
TRIG: EXT.Trig
Parity bits
: None
Controller: PC-9801 RA (NEC)
OS: MS-DOS Ver. 3.30, N88-BASIC Ver. 6.0
Command: [:READ ?]
Delimiter
: CR+LF
Interface function:
Handshaking
XON/XOFF
: Hardware
: Not used
: 9-pin D-sub connector
SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, CO
User code
:
ASCII code
Connector
User connector
:
24-pin IEEE488 interface bus connector
All functions except switching the power on and off can be completely remote controlled and measurement data collected via either the
GP-IB or RS-232C interface
Please inquire regarding compatibility with the command sets of other manufacturers.
■
Output data to a printer (option)
When an RS-232C compatible PRINTER 9442 is connected,
you can print measurements by pressing the key if in
CONNECTOR CABLE 9444
Cord length
PRINTER 9442
approx 1.5m
manual trigger mode, or the
(free run) mode.
key if in internal trigger
AC ADAPTER 9443
Judgment
Item No.
Measurement function
Measurement value
9443-02
9443-01
(For the EU) (For Japan)
9443-03
(For the America)
Please specify appropriate model
number suffix when ordering.
: Thermal serial dot matrix
: 112 mm
: 52.5cps
Printing method
Paper width
Printing speed
Power supply
■ Equipped with a foot switch for printer control
As an alternative to pressing th
e
key or the
key,
: AC ADAPTER 9443 or supplied nickel-hydride battery
(capable of printing about 3000 lines on full charge from
9443)
you can also connect a foot switch to the external I/O TRIG
terminal. You can then initiate printing by stepping on the foot
switch (closing the circuit).
:
Approx. 160W ✕ 66.5H ✕ 170D mm; approx. 580 g
Dimensions and mass
When you purchase a PRINTER 9442, you must also purchase a CONNECTION
CABLE 9444 and a AC ADAPTER 9443 to connect it to the DMM.
4
Efficient
Evaluation Testing
PC measurement using the high accuracy
and broad coverage of the 3238 and 3239
Example of data processing with Microsoft Excel
Time
Current
Integration
Time History Graph of Current Integration
Time
Battery
■
Highly accurate measurement
with minimal drift
Discharge Characteristics
The unit uses self-regulation to suppress drift.
Also, the DMM is ideal for collecting data over
extended periods of time.
■
Using Excel for efficient data
processing
The DMM supports fast data processing
by allowing you to transfer data directly to
a worksheet through either the GP-IB or
RS-232C interface.
Consult your nearest HIOKI dealer for details on software
■
Supports large AC current measurement by clamp sensor
■
Easy setup
Both the 3237, 3238 and 3239 can measure live line currents using an
optional clamp sensor. Enter the name of the clamp sensor being used
and display current values simply by selecting a range.
Clamp sensor settings screen
Select 9010
Select the 20 A range.
From the menu's clamp sensor selection screen, select the name
of the sensor with the cursor key and press the
key.
Then, select the same range as you set for the sensor with the
cursor key.
* The accuracy of the clamp sensors shown on the left (when used with the
DMM) is calculated by taking: the difference in the AC V accuracy for the
DMM (dgt.) ✕ 10 (dgt.).
For the AC V accuracy of the DMM, see page 6.
In addition to the sensors described above, you can also connect the 3283, 3284, 3285 (requires the 9094) Clamp On HiTesters, and the 9277, 9278, 9279 (requires the 9555) DC Sensors.
5
■ 3237, 3238, 3239 common specifications (Accuracy at 23˚C±5˚C (73˚F±9˚F), 80% rh or less)
● DC voltage (DC V)
● AC voltage (AC V)
Range
200 mV
Resolution Full scale
Input impedance Overload protection
Range
Resolution Full scale
Input impedance Overload protection
1
µV 199.999mV Greater than 100MΩ
2000 mV 10 µV 1999.99mV Appox. 1 MΩ
600 V DC
1000 V DC
750 V AC
2000 mV 10 µV 1999.99mV Greater than 100MΩ
20
200
700
V
V
V
100 µV 19.9999
mV 199.999
10 mV 750.00
V
V
V
Appox. 1 MΩ
Appox. 1 MΩ
Appox. 1 MΩ
750 V rms, 1000Vpeak
However, less than
107 V Hz
20
200
1000
V
V
V
100 µV 19.9999
mV 199.999
10 mV 1000.00
V
V
V
Appox. 11 MΩ
Appox. 10 MΩ
Appox. 10 MΩ
1
However, less than
1
107 V Hz
● Resistance (Ω) 2-terminal measurement
Range
200
2000
20 kΩ 100 mΩ 19.9999kΩ Appox. 100
● Resistance (Ω) at Low Power function 2-terminal measurement
Open terminal voltage
Resolution Full scale
1
Current
Overload protection
Range
2000
20 kΩ 100 mΩ 19.9999kΩ Appox. 10
Open terminal voltage Overload protection
Resolution Full scale
10 mΩ 1999.99 Ω Appox. 100
Current
Ω
mΩ 199.999 Ω Appox. 1 mA 6V DC max.
Ω
µ
A
0.45V DC max.
Ω
10 mΩ 1999.99 Ω Appox. 1 mA 6V DC max.
µ
A
0.45V DC max.
500Vpeak
µ
A
A
A
A
A
6V DC max.
6V DC max.
6V DC max.
6V DC max.
6V DC max.
200 kΩ
1
Ω
Ω
199.999kΩ Appox.
1
µ
A
0.45V DC max.
200 kΩ
1
Ω
Ω
Ω
199.999kΩ Appox. 10
1999.99kΩ Appox. 1 µ
µ
500Vpeak
2000 kΩ 10
1999.99kΩ Appox. 100
n
A
0.45V DC max.
2000 kΩ 10
20 MΩ 100
● Continuity check
19.9999M
Ω
Ω
Appox. 100
n
Range
2000
Open terminal voltage Overload protection
Resolution Full scale
10 mΩ 1999.99 Ω Appox. 100
Current
100 MΩ
1
kΩ 100.000M
Appox. 20n
Ω
µ
A
0.45V DC max. 500 Vpeak
For sampling at in the 2 MΩ range or
the LPΩ 200 kΩ.range or higher
For fast sampling in the 20 MΩ range or higher.
Frequency
A built-in buzzer sounds when the resistance value is less than 50.00 Ω.
Frequency
FAST* MEDIUM SLOW
FAST*
● Diode check
50 Hz 20 ±1 ms 170 ±5 ms 1,360±50ms
60 Hz 16.7 ±1 ms 142 ±5 ms 1,420±50 ms
50 Hz 20 ±1 ms
60 Hz 16.7 ±1 ms
Range
Open terminal voltage Overload protection
Resolution Full scale
Current
2000 mV 10 µV 1999.99mV Appox. 1 mA 6V DC max. 500 Vpeak
* Approximately 55 ms required for self-calibration at 30-minute intervals.
■ 3238, 3239 specifications (Accuracy at 23˚C±5˚C (73˚F±9˚F), 80% rh or less)
● AC/DC current (A)
● DC current (DC A) Accuracy %, ppm=reading error, d=digit error
Range
200 mA
Resolution Full scale Internal resistance Overload protection
µA 199.999mA Appox.
Sampling
MEDIUM
Thermal
Range
1
1 Ω
coefficient
±
SLOW
FAST
250V, 2A fuse
2000 mA 10 µA 1999.99mA Appox. 100 m
Ω
200 mA ±0.1 %±6d ±0.1 %±10d ±0.1 %±300d
100ppm
150ppm
±
±
0.6d
0.6d
2000 mA ±0.15%±6d ±0.15%±10d 0.15% 300d
±
±
±
● AC current (AC A) 200mA range Accuracy %, ppm=reading error, d=digit error
● AC current (AC A) 2000mA range Accuracy
Sampling
MEDIUM
undefined
Sampling
MEDIUM
undefined
Thermal
Thermal
Range
Frequency
coefficient
coefficient
SLOW
FAST
undefined
SLOW
FAST
undefined
10 Hz to 20 Hz ±1.0%±200d
20 Hz to 45 Hz ±0.4%±200d
45 Hz to 300 Hz ±0.3%±100d
300 Hz to 1 kHz ±0.3%±100d
±
±
±
±
±
±
±
0.1 %
±
20d ±1.2%±200d
±
±
±
±
±
±
0.12%±20d
undefined
undefined
400ppm
300ppm
300ppm
300ppm
500ppm
±20d
±10d
±10d
±10d
±30d
±0.6%±200d
±0.4%±100d
±0.4%±100d
±0.6%±200d
±1.2%±300d
undefined
undefined
undefined
600ppm
400ppm
400ppm
600ppm
±
20d
10d
10d
20d
±0.5%±200d
±0.4%±200d
±0.4%±200d
±0.5%±300d
±1.0%±300d
undefined
±0.6%±200d
±0.6%±200d
±0.6%±200d
±1.2%±300d
undefined
undefined
±
±
±
All
Ranges
±0.4%±300d
±0.4%±300d
±0.5%±400d
±1.0%±400d
±0.6%±300d
±0.6%±300d
±1.2%±400d
undefined
1
3
kHz to 3 kHz ±0.3%±100d
kHz to 10 kHz ±0.5%±300d
0.12%±30d
10 kHz to 30 kHz ±1.0%±300d
Specified input is 16 mA or higher
Additional error due to crest factor: 1<CF<2: ±200d, 2<CF<3: ±500d, 3<CF: Outside the assured accuracy range
0.1 %
±
30d
undefined
Specified input is 160 mA or higher
● Frequency (Hz) Source is AC V only and input level is higher than 8% of full scale
● Frequency (Hz) Accuracy %, ppm=reading error, d=digit error
Range
Internal resistance
Resolution
Full scale
Min. measurement Overload protection
For all gate times
Square-wave input between 10 Hz to 300 kHz, 10 V p-p.
Thermal
Range
100 Hz 0.1 mHz 99.9999 Hz Appox. 1M
Ω
Ω
Ω
Ω
Ω
10 Hz
coefficient
600 V DC
1
kHz mHz 999.999 Hz Appox. 1M
1
10 Hz
10 Hz
10 Hz
10 Hz
750 V rms,
±
0.015%
±
2d
±5 ppm
All Ranges
10 kHz 10 mHz 9.99999kHz Appox. 1M
100 kHz 100mHz 99.9999kHz Appox. 1M
300 kHz
1000Vpeak
However, less
than 107 V Hz
Frequency gate time
1
Hz 999.999kHz Appox. 1M
FAST
MEDIUM
110 ±10 ms
SLOW
15 ±6 ms
1,010 ±20 ms
Measurement time: from gate time to the input signal period ✕ 2
■ 3239 specifications (Accuracy at 23˚C±5˚C (73˚F±9˚F), 80% rh or less)
● Resistance (Ω) 4-terminal measurement
Range Resolution Full scale Current
● Resistance (Ω) at Low Power function 4-terminal measurement
Open terminal voltage
Open terminal voltage Overload protection
Overload protection
Range Resolution Full scale
2000 10 mΩ 1999.99 Ω Appox. 100
20 kΩ 100 mΩ 19.9999kΩ Appox. 10
Current
200
Ω
1
mΩ 199.999 Ω Appox. 1 mA 6V DC max.
Ω
µ
A
0.45V DC max.
V, Ω
terminal
V, Ω
500Vpeak
terminal
µ
A
0.45V DC max. 500Vpeak
2000
Ω
10 mΩ 1999.99 Ω Appox. 1 mA 6V DC max.
SENSE
terminal
200 kΩ
1
Ω
Ω
199.999kΩ Appox.
1
µ
A
0.45V DC max.
0.45V DC max.
20 kΩ 100 mΩ 19.9999kΩ Appox. 100
µ
A
A
A
6V DC max.
6V DC max.
6V DC max.
SENSE
400Vpeak
400Vpeak
terminal
200 kΩ
1
Ω
Ω
199.999kΩ Appox. 10
1999.99kΩ Appox.
µ
2000 kΩ 10
1999.99kΩ Appox. 100n
A
2000 kΩ 10
1
µ
6
● 3237 DC voltage (DC V) Accuracy %, ppm=reading error, d=digit error
● 3238, 3239 DC voltage (DC V) Accuracy %, ppm=reading error, d=digit error
Sampling
MEDIUM
Sampling
MEDIUM
Thermal
Thermal
Range
coefficient
coefficient
SLOW
FAST
300d
100d
SLOW
±0.012%±6d
FAST
0.02% 300d
0.015%
200 mV ±0.026%±6d
±0.026%±10d
±
0.035%
±
±
±
±
±
±
20ppm
15ppm
20ppm
20ppm
20ppm
±0.6d
±0.2d
±0.5d
±0.2d
±0.2d
±0.012%
±10d
±
±
±
±
±
±
±
12ppm
10ppm
16ppm
16ppm
16ppm
±
±
±
±
±
0.6d
0.2d
0.5d
0.2d
0.2d
2000mV ±0.025%±2d
±0.025%±8d
±
0.03%
±
±0.01 %±2d
±0.01 %±8d
±
±
±
±
±
100d
100d
100d
100d
20
V
V
V
±0.028%±5d ±0.028%±10d
±
±
±
0.035%
0.035%
0.035%
±
100d
100d
100d
±0.016%±5d ±0.016%±10d
0.02%
0.02%
0.02%
±
±
±
200
1000
±0.028%±2d
±0.028%±2d
±0.028%±8d
±0.028%±8d
±
±
±0.016%±2d
±0.016%±2d
±0.016%±8d
±0.016%±8d
CMRR (50/60Hz Rl=1kΩ): SLOW 130dB, MEDIUM 90dB, FAST 20dB NMRR (50/60Hz ): SLOW 70dB, MEDIUM 50dB, FAST 0dB
● 3237 AC voltage (AC V) Accuracy %, ppm=reading error, d=digit error
● 3238, 3239 AC V Accuracy %, ppm=reading error, d=digit error
Sampling
MEDIUM
undefined
Sampling
MEDIUM
undefined
Thermal
Thermal
Range
Frequency
coefficient
±
coefficient
SLOW
FAST
undefined
SLOW
FAST
undefined
10 Hz to 20 Hz ±1.5%±200d
20 Hz to 45 Hz ±0.5%±200d
45 Hz to 300 Hz ±0.2%±100d
300 Hz to 3 kHz ±0.2%±100d
0.15%
±
20d ±0.8%±200d
±
±
±
±
±
±
±
800ppm
200ppm
100ppm
100ppm
100ppm
300ppm
300ppm
±20d
±20d
±10d
±10d
±10d
±40d
±40d
undefined
undefined
±
±
±
±
500ppm
200ppm
200ppm
300ppm
±
20d ±0.2%±200d
10d ±0.1%±100d
10d ±0.1%±100d
20d ±0.1%±100d
undefined
undefined
±0.5%±300d
±0.2%±200d
±0.3%±200d
±1.5%±600d
undefined
undefined
±
±
±
±0.3%±200d
±0.1%±200d
±0.1%±200d
±0.3%±400d
±0.3%±400d
undefined
±0.2%±300d
±0.3%±300d
±1.5%±700d
undefined
±0.1%±300d
±0.1%±300d
±0.3%±500d
±0.3%±500d
All
3
kHz to 10 kHz ±0.3%±200d
Ranges
10 kHz to 30 kHz ±1.5%±600d
±
0.15%
±
60d ±0.3%±400d
±0.3%±400d
30 kHz to 50 kHz
50 kHz to 100kHz
100kHz to 300kHz
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
±
±
1.5%±
±
1000d
5000d
±
1.5%
±
±
1000d
5000d
±
1.5%
±
1100d
5000d
±
0.15%
±100d
undefined
undefined
5.0%
±5.0%
±
5.0%
±
±
0.5%±
500d
The accuracy above is standard for inputs higher than 8% of full scale (higher than 160 V for a range of 750 V).
Additional error due to crest factor: 1<CF<2: ±200d, 2<CF<3: ±0.2%rdg.±500d(3237), ±500d(3238, 3239), 3<CF: Outside the assured accuracy range
● 3237 Resistance (Ω) Accuracy %, ppm=reading error, d=digit error
● 3238, 3239 Resistance (Ω) Accuracy %, ppm=reading error, d=digit error
Sampling
MEDIUM
±0.05 %±8d ±0.05 %±18d
Sampling
MEDIUM
±0.03 %±8d ±0.03 %±18d
±0.02 %±2d ±0.02 %±12d
±0.02 %±2d ±0.02 %±12d
±0.02 %±2d ±0.02 %±12d
±0.03 %±2d ±0.03 %±12d
Measure-
ment
Thermal
coefficient
Thermal
Range
200
2000
coefficient
SLOW
FAST
SLOW
FAST
Ω
±
±
±
±
±
0.05%
±
±
±
±
±
300d
±50ppm
±50ppm
±50ppm
±50ppm
±50ppm
±
±
±
±
±
0.8d
0.2d
0.2d
0.2d
0.2d
±
±
±
±
±
0.03%
±
±
±
±
±
300d
±
±
±
±
±
30ppm
20ppm
20ppm
20ppm
30ppm
±0.8d
±0.2d
±0.2d
±0.2d
±0.2d
Ω
±0.05 %±2d ±0.05 %±12d
0.05%
0.05%
0.05%
0.05%
100d
100d
200d
200d
0.02%
0.02%
0.02%
0.03%
100d
100d
200d
200d
20 kΩ ±0.05 %±2d ±0.05 %±12d
200 kΩ ±0.05 %±2d ±0.05 %±12d
2000 kΩ ±0.05 %±2d ±0.05 %±12d
2-
terminal
measurement
20 MΩ ±0.3 %±4d ±0.3 %±20d ±0.3 %±200d
100 MΩ ±3.0 %±10d ±3.0 %±50d ±3.0 %±500d
±
300ppm
±
0.4d
±0.2 %±4d ±0.2 %±20d ±0.2 %±200d
±3.0 %±10d ±3.0 %±50d ±3.0 %±500d
±
200ppm
±
0.4d
±
0.3%
±
1d
±
0.3%
±
1d
After zero adjustment. When measuring high resistance, use a shielded cable such as the 9236 CONNECTION CORD (1.7m).
● 3237 Resistance (Ω) Accuracy at Low Power function
● 3238, 3239 Resistance (Ω) Accuracy at Low Power function
Sampling
MEDIUM
±0.05 %±6d ±0.05 %±14d
Sampling
MEDIUM
±0.02 %±6d ±0.02 %±14d
±0.02 %±6d ±0.02 %±14d
±0.02 %±6d ±0.02 %±14d
Measure-
ment
Thermal
Thermal
coefficient
Range
2000
coefficient
SLOW
FAST
SLOW
FAST
Ω
±
±
±
0.05 %
±
±
±
300d
±
±
±
50ppm
50ppm
50ppm
±
±
±
0.6d
0.6d
0.6d
±
±
±
0.02%
±
±
±
300d
±
±
±
20ppm
20ppm
20ppm
±0.6d
±0.6d
±0.6d
20 kΩ ±0.05 %±6d ±0.05 %±14d
200 kΩ ±0.05 %±6d ±0.05 %±14d
0.05 %
0.05 %
300d
300d
0.02%
0.02%
300d
300d
2-
terminal
measurement
2000 kΩ
±0.3 %±6d
±0.3 %±20d
±0.3 %±500d
±
300ppm
±
0.6d
±0.2 %±6d
±0.2 %±20d
±0.2 %±300d
±200ppm±0.6d
After zero adjustment. When measuring high resistance, use a shielded cable such as the 9236 CONNECTION CORD (1.7m).
● 3237 Continuity check Accuracy %, ppm=reading error, d=digit error ● 3238, 3239 Continuity check Accuracy %, ppm=reading error, d=digit error
Sampling
FAST only
Sampling
FAST only
±0.02 %±300d
Thermal
Thermal
Range
2000
coefficient
±
coefficient
Ω
±0.05 %±300d
50ppm
±0.6d
±20ppm±0.6d
● 3237 Diode check Accuracy %, ppm=reading error, d=digit error
● 3238, 3239 Diode check Accuracy %, ppm=reading error, d=digit error
Sampling
MEDIUM
Sampling
MEDIUM
±0.01 %±8d
Thermal
Thermal
Range
2000
coefficient
±
coefficient
SLOW
0.025%
FAST
0.03% 100d
SLOW
±0.01 %±2d
FAST
0.015% 100d
Ω
±
±2d
±0.025%
±8d
±
±
15ppm
±0.2d
±
±
±10ppm±0.2d
4-terminal measurement
Resistance (Ω) Accuracy %, ppm=reading error, d=digit error
4-terminal measurement
● Resistance (Ω) Accuracy at Low Power function
●
Sampling
MEDIUM
±0.03 %±8d ±0.03 %±18d
Sampling
MEDIUM
No range
Measure-
ment
Thermal
coefficient
Thermal
Range
200
2000
coefficient
SLOW
FAST
0.03 % 300d
100d
SLOW
No range
FAST
No range
Ω
±
±
±
±
±
±
±30ppm
±20ppm
±20ppm
±20ppm
±30ppm
±
±
±
±
±
0.8d
0.2d
0.2d
0.2d
0.2d
No range
Ω
±0.02 %±2d ±0.02 %±12d
0.02 %
0.02 %
0.02 %
0.03 %
±
±
±
±
±0.02 %±6d ±0.02 %±14d
±0.02 %±6d ±0.02 %±14d
±0.02 %±6d ±0.02 %±14d
±
±
±
0.02%
0.02%
0.02%
±
±
±
300d
300d
300d
±
±
±
20ppm
20ppm
20ppm
±0.6d
±0.6d
±0.6d
4-
20 kΩ ±0.02 %±2d ±0.02 %±12d
200 kΩ ±0.02 %±2d ±0.02 %±12d
2000 kΩ ±0.03 %±2d ±0.03 %±12d
100d
200d
200d
terminal
measurement
±0.2 %±6d
±0.2 %±20d
±0.2 %±300d
±200ppm±0.6d
The accuracy quoted above is for a contact resistance of 100 Ω or less.
7
■ 3237, 3238, 3239 General Specifications
● AC measurement: True RMS value measurement
● Crest factor: 3.0 max.
● Ancillary functions: Comparator, Average (0 to 99 times), Zero Adjust, Trigger (the display changes when the trigger is activated),
and the Save/Load functions. (Up to 30 types of setting conditions)
● Interface: External input/output, RS-232C and GP-IB (option -01 specifications)
● Display: LED max. 199999 (999999 for frequency)
● Sampling rate(see page 1): SLOW approx. 1 samples/s
MEDIUM approx. 8 to 9 samples/s
FAST approx. 300 samples/s (Does not apply at resistances higher than 2MΩ, or LPΩ higher than 200kΩ)
(self-calibration takes place for approximately 55 ms at 30-minute intervals for FAST sampling only.)
● Range selection: Auto and Manual
● Applicable standards: Safety: EN61010-1+A2, EN61010-2-031
Lo terminal: CAT I (500V), CAT II (300V)
Hi terminal: CAT I (1000V), CAT II (600V)
EMC: EN61326+A1 Class B, EN61000-3-2+A1+A2, EN61000-3-3
● Ambient temperature of use: 0 to 40 ˚C(32˚F to 104˚F) 80%RH (no condensation)
● Storage temperature range: -10 to 50˚C(-14˚F to 122˚F) 70%RH (no condensation)
● Power supply: Select from AC 100 V/120 V/220 V/240 V, (50/60 Hz) specify when ordering
● Maximum rated power: 15 VA
● Dimensions and mass: Approx. 215 W✕80 H✕265 D mm, 2.6kg
Approx 8.5˝ W ✕ 3.5˝ H ✕10.4˝ D, 91.7 oz.
Options
Economical Type
RS-232C cable
RS-232C CABLE 9637 (9pin-9pin, Reverse type/1.8m)
RS-232C CABLE 9638 (9pin-25pin, Reverse type/1.8m)
DIGITAL HiTESTER 3237
DIGITAL HiTESTER 3237-01 (with GP-IB)
Advanced Type
GP-IB cable
The specifications of the 3237, 3238 and 3239 are –01 specifications
GP-IB CABLE 9151-02 (2m)
GP-IB CABLE 9151-04 (4m)
DIGITAL HiTESTER 3238
DIGITAL HiTESTER 3238-01 (with GP-IB)
Printer
4-terminal Ω function & Advanced Type
PRINTER
9442
CONNECTOR CABLE 9444 (For 9442 printer)
DIGITAL HiTESTER 3239
DIGITAL HiTESTER 3239-01 (with GP-IB)
AC ADAPTER
AC ADAPTER
AC ADAPTER
9443-01 (For 9442 printer, Japan)
9443-02 (For 9442 printer, EU)
9443-03 (For 9442 printer, America)
RECORDING PAPER 1196 (For printer, 10 rolls)
When you purchase a PRINTER 9442, you must also purchase a 9444
CONNECTOR CABLE and a AC ADAPTER 9443 to connect it to the DMM.
cord length 65cm
For printer specifications, see page 3.
TEST LEAD 9170-10 (included)
4-Terminal Ω measurement probe for 3239
CLIP-TYPE LEAD 9287-10 (Approx. 85 cm between connectors, and 8 cm between probes)
CLIP-TYPE LEAD 9452(Approx. 80 cm between connectors, and 20 cm between probes)
FOUR-TERMINAL LEAD 9453(Approx. 80 cm between connectors, and 30 cm between probes)
PIN-TYPE LEAD 9461(Approx. 40 cm between connectors, and 25 cm between probes)
9010-50
Options
Clamp sensors
CLAMP ON PROBE 9010-50 (10/20/50/100/200/500A AC )
CLAMP ON PROBE 9018-50 (10/20/50/100/200/500A AC, Broadband type)
CLAMP ON PROBE 9132 (20/50/100/200/500/1000A AC )
9287-10
9452
9453
9461
For Clamp sensors specifications, see page 4.
HIOKI (Shanghai) Sales & Trading Co., Ltd. :
DISTRIBUTED BY
1904 Shanghai Times Square Office, 93 Huai Hai Zhong Road
Shanghai, P.R.China POSTCODE: 200021
TEL +86-21-6391-0090/0092 FAX +86-21-6391-0360
E-mail: info-sh@hioki.cn
Beijing Office :
HEAD OFFICE :
A-2602 Freetown, 58 Dong San Huan Nan Road
Beijing, P.R.China POSTCODE: 100022
TEL +86-10-5867-4080/4081 FAX +86-10-5867-4090
E-mail: info-bj@hioki.cn
81 Koizumi, Ueda, Nagano, 386-1192, Japan
TEL +81-268-28-0562 / FAX +81-268-28-0568
E-mail: os-com@hioki.co.jp
Guangzhou Office :
HIOKI USA CORPORATION :
Room 303, Profit Plaza, No.76, West Huangpu Road
Guangzhou, P.R.China POSTCODE: 510623
TEL +86-20-38392673/2676 FAX +86-20-38392679
E-mail: info-gz@hioki.cn
6 Corporate Drive, Cranbury, NJ 08512 USA
TEL +1-609-409-9109 / FAX +1-609-409-9108
E-mail: hioki@hiokiusa.com
All information correct as of Sep. 12, 2007. All specifications are subject to change without notice.
3239E4-79M-03P Printed in Japan
相关型号:
323931
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
MACOM
©2020 ICPDF网 联系我们和版权申明