ALN1884T2 [ASB]
Internally Matched LNA Module;型号: | ALN1884T2 |
厂家: | ADVANCED SEMICONDUCTOR BUSINESS INC. |
描述: | Internally Matched LNA Module |
文件: | 总3页 (文件大小:210K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
plerowTM ALN1884T2
Internally Matched LNA Module
Features
Description
The plerowTM ALN-series is the compactly designed surface-mount
module for the use of the LNA with or without the following gain blocks in
the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS,
PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communi-
cation terminals, CATV and so on. It has an exceptional performance of
low noise figure, high gain, high OIP3, and low bias current. The stability
factor is always kept more than unity over the application band in order
to ensure its unconditionally stable implementation to the application
system environment. The surface-mount module package including the
completed matching circuit and other components necessary just in case
allows very simple and convenient implementation onto the system
board in mass production level.
· S21 = 23.8 dB @ 1915 MHz
= 23.2dB @ 1850 MHz
· NF of 0.55 dB over Frequency
· Unconditionally Stable
· Single 5V Supply
· High OIP3 @ Low Current
Specifications (in Production)
Typ. @ T = 25C, Vs = 5 V, Freq. = 1883.5 MHz, Zo.sys = 50 ohm
2-stage Single Type
Specifications
Typ
Parameter
Unit
Min
1850
22.5
Max
Frequency Range
Gain
MHz
dB
1915
23.5
0.3
0.55
34
More Information
Gain Flatness
dB
0.4
Website: www.asb.co.kr
E-mail: sales@asb.co.kr
Noise Figure
dB
0.6
Output IP3 (1)
S11 / S22 (2)
dBm
dB
33
20
Tel: (82) 42-528-7223
Fax: (82) 42-528-7222
-20 / -15
120
Output P1dB
dBm
sec
mA
V
21
-
Switching Time (3)
Supply Current
Supply Voltage
Impedance
100
5
50
Package Type & Size
mm
Surface Mount Type, 10Wx10Lx3.8H
Operating temperature is -40C to +85C.
1) OIP3 is measured with two tones at an output power of 5 dBm / tone separated by 1 MHz.
2) S11/S22 (max) is the worst value within the frequency band.
3) Switching time means the time that takes for output power to get stabilized to its final level after switching DC voltage from 0 V to VS.
Outline Drawing (Unit: mm)
Pin Number
Function
RF In
2
5
6
plerow
RF Out
Vs
ALN1884T2
ASB Inc.
Others
Ground
(Top View)
(Bottom View)
Note: 1. The number and size of ground via holes in
a circuit board is critical for thermal RF
grounding considerations.
2. We recommend that the ground via holes be
placed on the bottom of all ground pins for
better RF and thermal performance, as
shown in the drawing at the left side.
Solder Stencil Area
(Side View)
Ø 0.4 plated thru holes to ground plane
(Recommended Footprint)
1/3
www.asb.co.kr
August 2017
plerowTM ALN1884T2
Internally Matched LNA Module
S-parameters
Typical Performance
(Measured)
1850~1915 MHz
+5 V
Noise Figure
S-parameters & K Factor
OIP3
P1dB
2/3
www.asb.co.kr
August 2017
plerowTM ALN1884T2
Internally Matched LNA Module
Application Circuit
VS
+
-
Tantal or MLC (Multi Layer Ceramic)
Capacitor
C1
C2
OUT
IN
ALN
1) The tantal or MLC (Multi Layer Ceramic) capacitor is optional and for bypassing the AC noise introduced
from the DC supply. The capacitance value may be determined by customer’s DC supply status. The ca-
pacitor should be placed as close as possible to Vs pin and be connected directly to the ground plane for
the best electrical performance.
2) DC blocking capacitors are always necessarily placed at the input and output port for allowing only the
RF signal to pass and blocking the DC component in the signal. The DC blocking capacitors are includ-
ed inside the ALN module. Therefore, C1 & C2 capacitors may not be necessary, but can be added just
in case that the customer wants. The value of C1 & C2 is determined by considering the application fre-
quency.
Recommended Soldering Reflow Process
Evaluation Board Layout
Vs
20~40 sec
260 C
Ramp-up
(3 ˚C/sec)
IN
OUT
Ramp-down
(6 C/sec)
200 C
150 C
60~180 sec
Size 25x25 mm
(for ALN-AT, BT, T Series – 10x10 mm)
Copyright 2010-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no re-
sponsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced
in any form or by any means without the prior written consent of ASB.
3/3
www.asb.co.kr
August 2017
相关型号:
©2020 ICPDF网 联系我们和版权申明