SMT06C [ARTESYN]
DC-DC CONVERTERS C Class Non-isolated; DC -DC转换器的C类非隔离型号: | SMT06C |
厂家: | ARTESYN TECHNOLOGIES |
描述: | DC-DC CONVERTERS C Class Non-isolated |
文件: | 总3页 (文件大小:186K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMT06C Series
5 V i n a n d 1 2 V i n s i n g l e o u t p u t
DC-DC CONVERTERS C Class Non-isolated
1
NEW Product
• 6 A current rating
• Input voltage range: 4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc
• Output voltage range: 0.9 Vdc to 3.3/5.0 Vdc
• Industry leading value
• Cost optimized design
• Excellent transient response
• Output voltage adjustability
• Pathway for future upgrades
• Supports silicon voltage migration
• Resulting in reduced design-in and qualification time
• Designed in reliability: MTBF of >7 million hours
per Telcordia SR-332
• Available RoHS compliant
The SMT06C series is a new high density open-frame, non-isolated converter for space sensitive
applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc)
and offers a wide 0.9 Vdc to 5.0 Vdc output voltage range with a 6 A load. An external resistor
adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum.
Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input
version. The series offers remote ON/OFF and overcurrent protection as standard. With full
international safety approvals including EN60950 and Ul/cUL60950, the SMT06C reduces
compliance costs and time to market.
2 YEAR WARRANTY
All specifications are typical at nominal input Vin = 12 V, full load at 25 °C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS (CONTD.)
Voltage adjustability
(See Note 6)
5 Vin
12 Vin
0.9-3.3 Vdc
0.9-5.0 Vdc
Turn ON threshold
5 Vin
12 Vin
4.5 Vdc typ.
9.3 Vdc typ.
Output setpoint accuracy 1.0% trim resistors
2.5%
0.2%
Turn OFF threshold
5 Vin
4.3 Vdc typ.
7.8 Vdc typ.
12 Vin
Line regulation
Load regulation
Min/max load
Low line to high line
Full load to min. load
GENERAL SPECIFICATIONS
0.5%
Efficiency
See Table on page 2
200 kHz
0 A/6 A
Switching frequency
Fixed
Overshoot
(at turn-on)
5 Vin
12 Vin
3.0% max.
1.0% max.
Approvals and
standards
(See Note 4)
TÜV Product Services
IEC60950, UL/cUL60950
Undershoot
At turn-off
100 mV max.
Material flammability
Weight
UL94V-0
9.3 g (0.3 oz)
150 µm
Ripple and noise
5 Hz to 20 MHz
(See Note 2)
See Table on page 2
Transient response
(See Note 1)
75 mV max. deviation
150 µs recovery to
within regulation band
Coplanarity
MTBF
Telcordia SR-332
7,562,142 hours
INPUT SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Input voltage range
5 Vin
12 Vin
4.5-5.5 Vdc
10.2-3.8 Vdc
Thermal performance
(See Note 9)
Operating ambient,
temperature
0 ºC to +80 ºC
Input current
Min load
Remote OFF
50 mA
5mA
Non-operating
-40 ºC to +125 ºC
PROTECTION
Input current (max.)
(See Note 8)
5 Vin
12 Vin
5.1 A max. @ Io max.
1.6 A @ lo max.
Short-circuit
Hiccup, non-latching
Input reflected ripple
(See Note 2)
5 Vin
12 Vin
52 mA (pk-pk)
56 mA (pk-pk)
RECOMMENDED SYSTEM CAPACITANCE
Remote ON/OFF
Input capacitance
Output capacitance
(See Note 10) 270 µF/20 mΩ ESR max.
(See Note 10) 680 µF/10 mΩ ESR max.
Logic compatibility
Positive logic
>2.4 Vdc
ON
OFF
<0.8 Vdc
Start-up time
(See Note 3)
Power-up
Remote ON/OFF
<20 ms
<20 ms
File Name: smt06c.pdf Rev (03): 15 Dec 2005
SMT06C Series
5 V i n a n d 1 2 V i n s i n g l e o u t p u t
DC-DC CONVERTERS C Class Non-isolated
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
NEW Product
OUTPUT
POWER
(MAX.)
OUTPUT
CURRENT
(MIN.)
OUTPUT
CURRENT
(MAX.)
REGULATION
INPUT
OUTPUT
VOLTAGE
EFFICIENCY
(TYP.)
MODEL
NUMBER (11,12)
VOLTAGE
LINE
LOAD
20 W
30 W
4.5-5.5 Vdc
0.9-3.3 Vdc
0.9-5.0 Vdc
0 A
0 A
6 A
6 A
89%
91%
0.2%
0.2%
0.5%
0.5%
SMT06C-05SADJJ
SMT06C-12SADJJ
10.2-13.8 Vdc
Part Number System with Options
S M T 0 6 C - 1 2 S A D J J
Product Family
Packaging Options (11)
SMT = Surface Mount
J = Pb-free (RoHS 6/6 compliant)
Rated Output Current
Number of Outputs
SADJ = Single Adjustable Output
06 = 6 A
Performance
C = Cost Optimized
Input Voltage
05 = 4.5 Vdc to 5.5 Vdc
12 = 10.2 Vdc to 13.8 Vdc
Output Voltage Adjustment of the SMT06C Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT06C series. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT06C series converter
leaves the factory the output has been adjusted to the default voltage of 0.9 V.
Notes
Ripple and Noise Specification
Output
1
di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo max. to
0.75 lo max. and 0.75 lo max. to 0.5 lo max.
Model
Pk - Pk
RMS
2
3
Measured with external filter. See Application Note 169 for details.
Power up is the time from application of dc input to Power Good high.
Remote ON/OFF asserted high to Power Good high.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
Measured as per recommended set-up. Cin = 270 µF (20 mΩ ESR
max.). Cout = 680 µF (10 mΩ ESR max.).
Voltage
5 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc
30 mV
40 mV
15 mV
15 mV
4
5
6
12 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc to 5 Vdc
40 mV
50 mV
20 mV
20 mV
Uses external resistor from trim to ground. Minimum value 485 Ω for 5 V
model, 280 Ω for 12 V model. See Application Note 169 for details.
Signal line assumed <3 m.
7
8
9
External input fusing recommended.
See Application Note 169 for operation above 50 ºC.
10 See Application Note 169 for more details.
11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
12 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. 60950
UL 60950 File No. E139421
TÜV Product Service (EN60950:2000)
Certificate No. B 04 08 19870 228
CB report and certificate to US/6415C/UL
File Name: smt06c.pdf Rev (03): 15 Dec 2005
SMT06C Series
5 V i n a n d 1 2 V i n s i n g l e o u t p u t
DC-DC CONVERTERS C Class Non-isolated
3
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
NEW Product
0.190
(4.83)
0.190
(4.83)
1.200
(30.48)
0.190
(4.83)
0.310
(7.87)
0.190
(4.83)
PIN 5
PIN 2
PIN 1
PIN 6
0.050
(1.27)
Seating Plane
0.062
(1.57) REF
0.019
(0.48) TYP
6 x
0.089
(2.26)
All dimensions in inches (mm)
All tolerance 0.010in ( 0.25mm)
unless otherwise stated
PIN CONNECTIONS
PIN NUMBER
FUNCTION
Remote ON/OFF
Power Good
Trim
1
2
3
4
5
6
Vout
GND
Vin
Datasheet © Artesyn Technologies
® 2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: ꢀ Application Note ꢀ Longform Datasheet
www.artesyn.com
File Name: smt06c.pdf Rev (03): 15 Dec 2005
相关型号:
©2020 ICPDF网 联系我们和版权申明