NLP25-7624 [ARTESYN]
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES; 中低功率AC / DC电源型号: | NLP25-7624 |
厂家: | ARTESYN TECHNOLOGIES |
描述: | LOW TO MEDIUM POWER AC/DC POWER SUPPLIES |
文件: | 总3页 (文件大小:49K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NLP25 Series
S i n g l e , d u a l a n d t r i p l e o u t p u t
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 20-25W AC/DC Universal Input Switch Mode Power Supplies
1
• 4.00 x 2.07 x 0.91 inch package
• Overvoltage protection and short circuit protection
• 25W with free air convection cooling
• EN55022, EN55011 conducted emissions level B
• UL, VDE and CSA safety approvals
The NLP25 series is a 25W universal input AC/DC power supply on a 4.00 x 2.07 inch
card with a profile of less than 1 inch. The availability of four single output and three
multiple output models in an extremely small package size make the NLP25 ideal for
use in space critical, low power communication applications requiring an off line
power solution. The NLP25 provides 25W of output power with free air convection
cooling which can peak at 30W for 60 seconds. Standard features include
overvoltage and short circuit protection. The series, with full international safety
approvals and the CE mark, meets conducted emissions EN55022 level B and
complies to EN61000-4-2,-3,-4, -5 and -6 immunity standards. The NLP25 series is
designed for use in off line, low power data networking and computer applications
with limited space, such as hubs, routers, POS terminals, external disk storage and
cable modems. The availability of 5V outputs in single and multiple configurations
provides a solution for a myriad of microprocessor applications.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
EMC CHARACTERISTICS
Radiated emissions
Conducted emissions
Electrostatic discharge
EN55022/11, FCC part 15
EN55022/11, FCC part 15
EN61000-4-2
Level A
Level B
Level 2
Total regulation
(Line and load)
Main output
Auxiliary outputs
±2.0%
±5.0%
Overshoot/undershoot
Transient response
At turn-on
2.0%
Electrical fast
EN61000-4-4
Level 3
transients/bursts
Main output
50% to 100%
full load step
±5.0% max. dev.,
1ms recovery
to 1.0%
Surge susceptibility
RF field susceptibility
RF conducted
disturbance
EN61000-4-5
EN61000-4-3
EN61000-4-6
Level 3
Level 3
Level 3
Temperature coefficient
Overvoltage protection
Short circuit protection
±0.02% /°C
See table
GENERAL SPECIFICATIONS
Main output
Hold-up time
Efficiency
110VAC @ full load
5ms typ.
70% typ.
Continuous with
autorestart
110VAC @ full load
Minimum output current
INPUT SPECIFICATIONS
Input voltage range
See table
Isolation voltage
Input/output
Input/chassis
3000VAC
1500VAC
Switching frequency
Fixed
60kHz, ±10kHz
Universal input
90 to 264VAC
127 to 375VDC
Approvals and
standards
(See Notes 4, 8)
EN60950, IEC950
VDE0805, UL1950
CSA C22.2 No. 950
Input frequency range
Input current
47Hz to 440Hz
90VAC
230VAC
0.75A rms max.
0.35A rms max.
Weight
MTBF
115g (4oz)
MIL-HDBK-217F
150,000 hours min.
Safety ground
leakage current
120VAC, 60Hz
230VAC, 50Hz
0.2mA
0.4mA
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Notes 7, 8)
Operating ambient, FL
Non-operating
0°C to 50°C, ambient,
convection cooled
0°C to +50°C
-40°C to +85°C
Full load
Peak
See Note 1
Relative humidity
Altitude
Non-condensing
5% to 95% RH
Operating
Non-operating
10,000 feet max.
30,000 feet max.
Vibration (See Note 6)
Shock
5Hz to 500Hz
MIL-STD-810E
2.4G rms peak
516.4 Part IV
File Name: NLP25.PDF Rev: 01 Jan 2000
NLP25 Series
S i n g l e , d u a l a n d t r i p l e o u t p u t
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 20-25W AC/DC Universal Input Switch Mode Power Supplies
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
OUTPUT CURRENT
OUTPUT
POWER
OUTPUT
VOLTAGE
OVP
TOTAL
MODEL
(2)
RIPPLE
(3)
(1)
(5)
(3)
MIN
MAX
2.0A
0.8A
0.1A
2.0A
0.8A
0.1A
2.0A
0.8A
5.0A
2.08A
1.04A
0.52A
PEAK
2.5A
1.2A
THRESHOLD
REGULATION
NUMBER
20.8W
20.1W
19.6W
+5V (I )
A
0.2A
50mV
5.6V to 6.9V
±2.0%
±5.0%
±5.0%
±2.0%
±5.0%
±5.0%
±2.0%
±5.0%
±2.0%
±2.0%
±2.0%
±2.0%
NLP25-7608
NLP25-7607
NLP25-7629
+12V (I )
B
0.1A
0A
120mV
50mV
–12V (I )
C
0.15A
2.5A
1.2A
0.15A
2.5A
1.2A
6.0A
2.5A
1.25A
0.6A
+5V (I )
A
0.2A
0.1A
0A
50mV
5.6V to 6.9V
+12V (I )
B
120mV
50mV
–5V (I )
C
+5V (I )
A
0.2A
0.1A
0A
50mV
5.6V to 6.9V
5.6V to 6.9V
+12V (I )
B
120mV
50mV
25W
25W
25W
25W
+5V
+12V
+24V
+48V
NLP25-7605
NLP25-7612
NLP25-7624
NLP25-7617
0A
120mV
150mV
150mV
14V to 16.7V
29V to 34.2V
55V to 60V
0A
0A
Notes
OUTPUT PIN CONNECTIONS
1
2
3
Peak output current lasting less than 60 seconds with duty cycle less than
5.0% . During peak loading, output voltage may exceed total regulation
limits.
20MHz bandwidth, peak to peak, measured differentially with a 12 inch
twisted pair of number 16 AWG copper wire, terminated with a 47µF
capacitor of proper polarity and voltage rating.
Total regulation is defined as the static output regulation at 25°C, including
initial tolerance, line voltage within stated limit, load current within stated
limit, and output voltage adjusted to their factory settings. To achieve
specified regulation on multiple output models, minimum loads are required
on V(A) and V(B) as outlined in above table.
J 2
SINGLE
V (A)
DUAL
No Connection
Return
TRIPLE
V (C)
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Return
V (A)
Return
V (A)
V (A)
Return
V (A)
Return
Return
V (B)
V (B)
4
To maintain user-system safety approvals, the input power cable must be
appropriately rated and approved.
5
6
Main output voltage is protected by a Zener diode.
Three orthogonal axes, random vibration 10 minutes for each axes, 2.4G
rms 5Hz to 500Hz.
INPUT
7
8
CAUTION: Allow a minimum of 5 seconds after disconnecting line power
when making thermal measurements.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
PIN CONNECTIONS
J 1
Pin 1
AC Ground
AC Line
Pin 3
Pin 5
AC Neutral
www.a rte s yn.com
File Name: NLP25.PDF Rev: 01 Jan 2000
NLP25 Series
S i n g l e , d u a l a n d t r i p l e o u t p u t
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 20-25W AC/DC Universal Input Switch Mode Power Supplies
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
3
4.00 ±0.02
(101.60 ±0.5)
3.730 ±0.02
(94.74 ±0.5)
Maximum
Component
Height 0.91 (23.11)
1
2.07 ±0.02
(52.58 ±0.5)
1.80 ±0.02
(45.72 ±0.5)
J2
J1
5
3
1
If Metallic fastners are used, Max. stand-off dia.
should be 0.212 (5.38) and the screw or washer
should not protrude beyond the circle.
ø0.125 ±0.01
(ø3.18 ±0.25)
ALL DIMENSIONS IN INCHES (mm)
Input and output connectors Mating connectors
AC (J 1) connector type
AC (J 1) mating connector type
Molex 22-23-2051 or equivalent.
Molex 22-01-2057 with Molex
08-52-0123 crimp terminals
or equivalent.
DC (J 2) connector type
Molex 22-23-2051 or equivalent.
DC (J 2) mating connector type
Molex 22-01-2057 with Molex
08-52-0123 crimp terminals
or equivalent.
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. 10401-3336-0118
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062
Data Sheet © Artesyn Technologies
® 2002
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
www.a rte s yn.com
File Name: NLP25.PDF Rev: 01 Jan 2000
相关型号:
©2020 ICPDF网 联系我们和版权申明