N1200-96-1922 [ARTESYN]
Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC; 单,双,三人间和四输出1000和1200瓦AC / DC的高瓦数电源,带PFC型号: | N1200-96-1922 |
厂家: | ARTESYN TECHNOLOGIES |
描述: | Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC |
文件: | 总4页 (文件大小:66K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
N1000 and N1200 SERIES
Single, dual, triple and quad output
• Active harmonic corre ction to EN61000-3-2
• 90VAC to 264VAC unive rs al input
• Fle xible output voltage configuration
• Two output powe r ratings
• Force d curre nt s haring, all outputs
• DC OK (including LED)
• UL, CSA and TÜV s afe ty approvals
• Indus try s tandard 5 x 8 x 11 inch footprint
The N1000 and N1200 series are a range of systems-orientated, one to four
output power supplies which provide 1000W or 1200W of continuous power at
line voltages from 90VAC to 264VAC. Both series are harmonically corrected and
carry world wide safety approvals. Fully enclosed, fan cooled and in the industry
standard 5 x 8 x 11 inch form, the N series is an ideal choice when the economy
and predictable performance of a centralized system power supply are desired. A
unique dual converter architecture isolates the 5VDC logic output and the
peripheral voltages. Maximum flexibility is provided as power budgets shift and
change during the design cycle or as system upgrades are implemented. This
overcomes a major shortfall of many system power supplies which use a single
converter. To meet redundancy requirements, each output rail is isolated,
individually regulated and features forced current share. System interface signals
include AC and DC Good, current monitor (V1), overvoltage, OCP, over-
temperature protection, remote enable, margin check and inhibit as standard. By
combining robust performance and broad range, the N Series sets the standard
for centralized system power supplies.
[ 2 YEAR WARRANTY ]
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
(2)
EMC CHARACTERISTICS
OUTPUT SPECIFICATIONS
Voltage adjustability
Remote sense
Accessible at front panel
±10%
Radiated emissions
Conducted emissions
Harmonic distortion
EN55022/11, FCC part 15
Level A
Level A
Conforms
Level 3
EN55022/11, FCC part 15
EN61000-3-2
Open/reverse sense lead protection
Compensates for voltage drop of up to
0.5V to the load
Electrostatic discharge EN61000-4-2
RF field susceptibility
Electrical fast
transients/bursts
EN61000-4-3
EN61000-4-4
Level 3
Level 3
Level 3
Regulation, line or load All outputs, NL-FL
at nominal line or all
±0.2% ;
10mV min.
Surge susceptibility
EN61000-4-5
line variations at FL
GENERAL SPECIFICATIONS
Cross regulation
0.2% max. or 10mV between outputs
None at turn on/off
Overshoot/undershoot
Transient response
Hold-up time
Efficiency
90VAC, 1KW load
24ms min.
73%
Main output
25% step load
change at 1A/µs
≤2.0% max. dev.,
≤200µs recovery
to 1.0%
230VAC, full load
Isolation voltage
Input/output
Input/chassis
Output/output
3000VAC
1500VAC
500VAC
Temperature coefficient
Ripple and noise
±0.02% /°C
0Hz to 20MHz
50mV pk-pk or 1%
Switching frequency
100kHz
Overvoltage protection Reset by cycling AC
115 to 130%
of nominal
Approvals and
standards
EN60950, UL1950,
CSA C22.2 No. 950
Overload protection
105-115% full load
Auto recovery
Weight
Size
6.9kg (15Ibs)
Short circuit protection All outputs
5 x 8 x 11 inches
127 x 203.2 x 279.4 mm
Thermal protection
Current sharing
Auto shutdown, AC reset
50% to 100% load
MTBF
per MIL-HDBK-217E
100,000 hours
±5.0%
5VDC at full load
ENVIRONMENTAL SPECIFICATIONS
Current monitor (V1)
INPUT SPECIFICATIONS
Input voltage range
Input frequency range
Input surge current
±0.5V
Thermal performance
Operating ambient
Non-operating
0°C to +50°C
-15°C to +85°C
90 to 264VAC
47Hz to 63Hz
Cooling
60CFM
Internal DC ball bearing fan
Relative humidity
Altitude
Non-condensing
0% to 95% RH
Meets IEEE std. 587.1980;
3KV ring wave
Operating
Non-operating
6,000 feet max.
55,000 feet max.
Input current
Power factor
Power up time
120VAC, 1000W
12A
0.995 min.
1.0s max.
Vibration
5Hz to 500Hz
2.4G rms peak
115/230VAC, 1kW load
Full load
PAGE 1
MEDIUM TO HIGH POWER AC/DC POWER SUPPLIES
| 1000-1200W AC/DC
1000 and 1200 Watt
AC/DC high wattage powe r s upplie s with PFC
MAX. OUTPUT
OUTPUT V1
OUTPUT V2
OUTPUT V3
OUTPUT V4
MODEL NUMBER
(1)
POWER
VOLTAGE/CURRENT VOLTAGE/CURRENT VOLTAGE/CURRENT VOLTAGE/CURRENT
1000W
1000W
1000W
1000W
1000W
1000W
1000W
1000W
1000W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
1200W
3.3V @ 200A
5.0V @ 200A
N1000-96-9
N1000-96-1
5.0V @ 150A
5.0V @ 150A
5.0V @ 150A
5.0V @ 150A
5.0V @ 150A
5.0V @ 150A
5.0V @ 150A
2.0V @ 240A
3.3V @ 240A
5.0V @ 240A
12V @ 100A
24V @ 50A
12V @ 25A
12V @ 30A
12V @ 25A
12V @ 25A
5.0V @ 30A
3.3V @ 30A
24V @ 15A
12V @ 20A
5.0V @10A
12V @ 15A
12V @ 10V
12V @ 20V
12V @ 20A
12V @ 10A
N1000-96-122
N1000-96-121
N1000-96-1221
N1000-96-1224
N1000-96-1122
N1000-96-1922
N1000-96-1422
N1200-96-0
5V @ 10A
24V @ 5.0A
12V @ 10A
12V @ 10A
12V @ 5.0A
N1200-96-9
N1200-96-1
N1200-96-2
N1200-96-4
28V @ 43A
N1200-96-5
48V @ 25A
N1200-96-6
5.0V @ 200A
5.0V @ 200A
48V @ 25A
12V @ 40A
24V @ 20A
24V @ 20A
12V @ 30A
12V @ 35A
12V @ 30A
3.3V @ 40A
12V @ 30A
12V @ 30A
15V @ 30A
5.0V @ 40A
3.3V @ 40A
24V @ 20A
5.0V @ 40A
N1200-96-12
N1200-96-14
N1200-96-64
N1200-96-122
N1200-96-121
N1200-96-124
N1200-96-192
N1200-96-1221
N1200-96-1224
N1200-96-1331
N1200-96-1122
N1200-96-1922
N1200-96-1422
N1200-96-4122
5.0V @ 175A
5.0V @ 175A
5.0V @ 175A
5.0V @ 175A
5.0V @ 175A
5.0V @ 175A
5.0V @ 175A
5.0V @ 175A
5.0V @ 175A
5.0V @ 175A
24V @ 42A
12V @ 20A
5V @ 20A
24V @ 15A
12V @ 20A
12V @ 20A
12V @ 10A
15V @ 10A
12V @ 20A
12V @ 20A
12V @ 10A
12V @ 20A
5V @ 10A
24V @ 5A
5V @ 10A
12V @ 10A
12V @ 10A
12V @ 5A
12V @ 10A
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. R917062
Certificate No. R9172062
TÜV
UL1950 File No. E135734
CSA C22.2 No. 950 Bulletin No. 1402C
http://www.artesyn.com
PAGE 2
1000-1200W AC/DC
|
MEDIUM TO HIGH POWER AC/DC POWER SUPPLIES
1000 and 1200 Watt
AC/DC high wattage powe r s upplie s with PFC
Mechanical notes
OUTPUT PIN CONNECTIONS
A
AC connector is 3 position terminal block (#8 screws included), mating to
#8 ring tongue terminal.
PIN NO.
J 1
J 2
B
C
DC output is 5/16-18 studs mating to 5/16 terminal lugs.
J1 signal connector is Molex 39-30-1140 or equivalent. Mating connector
is Molex 39-01-2140 or equivalent.
1
2
+ Sense (V1) (4)
Current Monitor (V1) (5)
+ Sense (V2)
- Sense (V2)
D
J2 signal connector is Molex 39-01-1120 or equivalent. Mating connector
is 39-01-2120 or equivalent.
(5)
3
Inhibit
Current Share (V2)
+ Sense (V4)
- Sense (V4)
E
F
Signal connector contacts are Molex 39-00-0039 or equivalent.
Auxiliary DC output(s) are 6 position terminal block (#8 screws included)
mating to #8 ring tongue terminal.
4
- Sense (V1) (4)
No Connection
No Connection
5
G
TB1 and J2 are not installed on single output models.
6
Current Share (V4)
Remote Adj. (V2) (6)
Remote Adj. (V3) (6)
Remote Adj. (V4) (6)
Current Share (V3)
- Sense (V3)
(5)
7
Current Share
Remote Adj. (V1) (6)
8
Notes
(5)
9
AC Good
1
1000W or 1200W max. power. 500/600W max. power (V2 thru V4). All
outputs isolated.
10
11
12
13
14
Chassis Ground
Logic Ground
2
3
4
5
6
7
8
Specifications refer to all outputs except as noted (V1).
Signal referenced to V1 output neg. sense trim.
Use 20AWG or larger twisted pair.
Reference to Logic Ground (Pin J1-11).
See Figure 4.
(7)
Margin
+ Sense (V3)
N/A
No Connection
DC OK (5,8)
See Figure 3.
See Figure 5.
N/A
12.13 Max.
(308.10)
11.00
(279.40)
Auxiliary Outputs
(# 8 Screws)
AC Input
(# 8 Screws)
0.75
(19.05)
6.750
(171.450)
+
v
2
-
ACH
ACN
5.00
(127.00)
V2
V3
V4
+
v
3
-
T
B
1
4.00
(101.60)
TB1 and J2 are Not
Installed on Single
Output Models
+
v
4
-
V1
+
0.90 (22.86)
_
J
2
V1
J
1
1.30 (33.02)
0.50 (12.70)
8-32 X 0.29 (7.37) Deep (Max.)
(4) Both Sides
Main Output
5/16 - 18 Studs
50 IN-LB Torque Max.
1.13
(28.70)
2.80
(71.12)
5.75
(146.05)
J1
0.90 (22.86)
Pin 1
AIRFLOW
8.00
(203.2)
8-32 x 0.29 (7.37) Deep (Max.)
(4) Top and Bottom
J2
Pin 1
ALL DIMENSIONS IN INCHES (mm)
PAGE 3
MEDIUM TO HIGH POWER AC/DC POWER SUPPLIES
| 1000-1200W AC/DC
1000 and 1200 Watt
AC/DC high wattage powe r s upplie s with PFC
FIG. 5
FIG. 1
15V
FIG. 2 (Ref. FIG 5)
AC Power Fail Signal/DC OK Timing
J1-P9 AC Good, J1-P14 DC OK
85Vrms
AC Input Voltage
10K
Low = Power/Output fail
High = Power/Output OK
External Pull-up Required
Sink Current 20mA
J1-P3
0V
>10ms
AC Good Flag
(On Voltage 0.7V)
Close to Enable
>5ms
DC Outputs
FIG. 3
FIG. 4
Open = Nominal Voltage
Tie to +5V for High Margin
Output Voltage
DC Good Flag
5V
Tie to Logic Ground (J1-11)
For Low Margin.
(J1-P8)
> 10K
(J1-P12) Margin
Sense
STANDARD CONTROL SIGNALS
Remote enable
See Figure 1
DC OK
(See Figures 2 and 5)
Signal remains "Hi" as long as
output is ±5.0% of nominal.
AC power fail signal
(See Figure 5)
Signal "Hi" when AC >85VAC and
"Lo" when <75VAC.
Margin Hi/Lo (V1)
(See Figure 3)
Allows ±5.0% change in output
for system margin checking.
Remote Adjust
(See Figure 4)
The outputs may be remotely
adjusted linearly ±10% .
Current Monitor
Analog signal indicates load current in
single or parallel operation. 5±0.5VDC
represents FL, resistive load 103kΩ.
http://www.artesyn.com
PAGE 4
相关型号:
N1200-96-2
Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC
ARTESYN
N1200-96-4
Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC
ARTESYN
N1200-96-4122
Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC
ARTESYN
N1200-96-5
Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC
ARTESYN
N1200-96-6
Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC
ARTESYN
N1200-96-64
Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC
ARTESYN
N1200-96-9
Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC
ARTESYN
N1200CH36JOO
Silicon Controlled Rectifier, 5590A I(T)RMS, 4850000mA I(T), 3600V V(DRM), 3600V V(RRM), 1 Element
IXYS
N1200CH36KOO
Silicon Controlled Rectifier, 5590A I(T)RMS, 4850000mA I(T), 3600V V(DRM), 3600V V(RRM), 1 Element
IXYS
N1200CH36LOO
Silicon Controlled Rectifier, 5590A I(T)RMS, 4850000mA I(T), 3600V V(DRM), 3600V V(RRM), 1 Element
IXYS
N1200CH38GOO
Silicon Controlled Rectifier, 5590A I(T)RMS, 4850000mA I(T), 3800V V(DRM), 3800V V(RRM), 1 Element
IXYS
N1200CH38HOO
Silicon Controlled Rectifier, 5590A I(T)RMS, 4850000mA I(T), 3800V V(DRM), 3800V V(RRM), 1 Element
IXYS
©2020 ICPDF网 联系我们和版权申明