12-002-108TL [ARIES]
DIP Jumpers; DIP跳线
| 型号： | 12-002-108TL |
| 厂家： | 
ARIES ELECTRONICS, INC. |
| 描述： | DIP Jumpers |
| 文件： | 总1页 (文件大小：177K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Series 100 thru 111 DIP Jumpers
FEATURES:
• Aries offers a wide array of DIP jumper configurations and wiring possibilities for all
your programming needs.
• Reliable, electronically tested solder connections.
• Protective covers are ultrasonically welded on and
provide strain relief for cables.
• 10-color cable allows for easy identification and tracing.
• Consult factory for jumper lengths under 2.000 [50.80].
SPECIFICATIONS:
• Header body and cover is black UL 94V-0 4/6 Nylon.
• Header pins are Brass, 1/2 hard.
• Standard Pin plating is 10μ [.25μm] min. Gold per MIL-G-45204 over 50 μ [1.27μm]
min. Nickel per QQ-N-290.
• Optional Plating:
“T” = 200μ” [5.08μm] min. Matte Tin per ASTM B545-97 over 50μ” [1.27μm] min.
Nickel per QQ-N-290.
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes,
and configurations can be furnished, depending on quantities. Aries
reserves the right to change product specifications without notice.
“TL” = 200μ” [5.08μm] 90/10 Tin/Lead per MIL-T-10727 Type I over 50μ” [1.27μm]
min. Nickel per QQ-N-290.
• Cable insulation is UL Style 2697 Polyvinyl Chloride (PVC).
• Laminate is clear PVC, self-extinguishing.**
• .050 [1.27] pitch conductors are 28 AWG, 7/36 strand, Tinned Copper per ASTM B 33
(.039 [.99] pitch conductors are 26 AWG, 7/34 strand).
• Cable current rating=1 Amp @ 10°C [50°F] above
ambient.
ORDERING INFORMATION
X X - X X X X - X X X X X X
No. of conductors
(see table)
Optional suffix:
T=Tin plated header pins
TL= Tin/Lead plated
header pins
ST=stripped and Tin
Dipped ends
• Cable voltage rating=300 Volts.
Cable length in inches:
Ex: 2” = -002-
2.5” = -002.5-
(min. length=2.”[50.80mm])
• Cable temperature rating=176°F [80°C].
• Cable capacitance=13.0 pf/ft. [42.7pf/meter] nominal
@1 MHz.**
Jumper
series
• Crosstalk: 10’ sample, 5 ns rise time with 2 lines driven. Near end=4.7%;
Far end=4.3% nominal.**
(Series 106-111)
• Propagation delay=1.5 ns/ft. [4.9 ns/meter] nominal.**
STL= stripped and
Tin/Lead Dipped Ends
(Series 106-111)
Centers “C”
Dim. “D”
Available Sizes
4 thru 20
22
10
• Insulation resistance=10 Ohms (10 ft. [3 meters] min.).
.300 [7.62]
.400 [10.16]
.600 [15.24]
.395 [10.03]
.495 [12.57]
.695 [17.65]
**Note: Applies to .050 [1.27] pitch cable only.
MOUNTING CONSIDERATIONS:
•Suggested PCB hole size=.033 ± .002 [.86 ±.05].
24, 28, 40
“L” ± .125
All Dimensions: Inches [Millimeters]
All tolerances ± .005[.13]
unless otherwise specified
SERIES
100
“A”=(NO. OF CONDUCTORS X .050 [1.27) + .095 [2.41]
“B”=(NO. OF CONDUCTORS - 1) X .050 [1.27]
HEADER DETAIL
Note: 10, 12, 18, 20, & 28
conductor jumpers do not
have numbers on covers.
Numbers
shown pin
side for
reference
only.
“L” ± .125
See Data Sheet No.
11007 for other
configurations and
additional information.
SERIES
101
Bristol, PA USA
TEL: (215) 781-9956
FAX: (215) 781-9845
11006
REV. H
http://www.arieselec.com • info@arieselec.com
abc
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
相关型号：
©2020 ICPDF网 联系我们和版权申明