3406-55 [APITECH]
0MHz - 6000MHz RF/MICROWAVE VARIABLE ATTENUATOR, 3.8dB INSERTION LOSS-MAX;型号: | 3406-55 |
厂家: | API Technologies Corp |
描述: | 0MHz - 6000MHz RF/MICROWAVE VARIABLE ATTENUATOR, 3.8dB INSERTION LOSS-MAX 衰减器 瞄准线 射频 微波 |
文件: | 总4页 (文件大小:276K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Programmable Attenuators
Models 3406 & 3408
Programmable Attenuators
dc to 6.0 GHz
1 Watt
Ideal for Wireless/Test Applications
CELL CONFIGURATIONS:
Model
Number
NO. Attenuation
Cells Range/Steps
(dB)
Cell
Increments
(dB)
3406-55
6
8
55/1
1, 2, 4, 8, 16, 24
3408-55.75
55.75/0.25
0.25, 0.5, 1, 2, 4, 8,
16, 24
3408-103
8
103/1
1, 2, 4, 8, 16, 24, 48*
*48 dB cell comprised of two 24 dB cells
Features
INCREMENTAL ATTENUATION ACCURACY:
o
Higher Frequency range to 6 GHz.
Frequency
Accuracy
o
Wide Selection of Attenuation Ranges & Step
Range (GHz)
Sizes
- 0 to 55 dB in 1 dB steps
- 0 to 103 dB in 1 dB steps
- 0 to 55.75 in 0.25 dB steps
dc - 3
3 - 6
+0.3 dB or 2% whichever is greater
+0.4 dB or 3% whichever is greater
o
o
High Quality Construction & Connectors
Special Configurations Available Upon Request
MAXIMUM INSERTION LOSS (dB):
Frequency
3206-55
3408-55.75
3408-103
Description
Range (GHz)
The 3400 Series Programmable Step Attenuators are
designed for use in automatic test equipment and OEM
systems operating in the dc to 6 GHz frequency range. This
series is available in many standard attenuation ranges and
cell configurations. Custom designed configurations are
available upon request. Each cell contains a double-pole,
double-throw relay that provides a zero path or attenu-
ated path for the RF signal.
dc - 3
3 - 6
2.60
3.80
3.40
5.00
MONOTONICITY: dc to 6.0 GHz
POWER RATING: 1 watt average to 25°C ambient tem-
perature, derated linearly to 0.25 watt @ 70°C. 50 watts
peak (5 μsec pulse width; 1% duty cycle)
Microstrip circuitry and special compensation techniques
produce flat attenuation versus frequency characteristics.
The microstrip construction, using thin-film circuit ele-
ments, ensures product uniformity. To minimize RF
leakage, the 3400 Series Attenuators are provided with
gold-plated contact areas and feedthrough filters at each
control terminal.
POWER COEFFICIENT: <0.005 dB/dB/watt
RATED SWITCH LIFE: 5 million cycles operations per cell
@ 0 dBm
SWITCHING TIME: 6 msec. maximum at nominal rated
voltage
RELEASE TIME: 5 msec maximum
CYCLING RATE: 5 Hz maximum per relay
OPERATING VOLTAGE: +12V (+13V maximum; +9V min-
imum)
OPERATING CURRENT: 17 mA typical per cell @ +12V
TEMPERATURE RANGE (Operating): -30°C to +70°C
TEST DATA: Test data is available at additional cost.
Specifications
NOMINAL IMPEDANCE: 50 Ω
FREQUENCY RANGE: dc to 6.0 GHz
MAXIMUM SWR:
Frequency Range (GHz)
SWR
dc - 3
3 - 6
1.30
1.45
102
5305 Spectrum Drive, Frederick, MD 21703-7362 ꢀ TEL: 301-846-9222, 800-638-2048 ꢀ Fax: 301-846-9116
web: www.aeroflex.com/weinschel ꢀ email: weinschel-sales@aeroflex.com
Revision Date: 3/4/09
Programmable Attenuators
SPECIFICATIONS - Con’t
CONNECTORS: SMA female connectors per MIL-STD-348
Note: Control is non-latching and requires a continuous
control signal for the period of time in which attenuation is
required.
interface dimensions
- mate nondestructively with
MIL-C-39012 connectors. eads. May be used with PC board
sockets/ receptacles.
CONTROL TERMINALS: 0.040 inch. (1 mm) diameter
solderable leads. May be used with PC board sockets/
receptacles.
TTL DRIVER SPECIFICATIONS:
INTERFACE CONNECTOR: Option -1: 10 pin .025 square
post header on .1 center, mates with Amp connector
746285-1 or equivalent
CONSTRUCTION:
INPUT VOLTAGE:
V
High= +2.0V minimum
Housing:
Aluminum
IN
Connectors:
Stainless steel body and beryllium
copper contacts.
+5.0V typical
Vcc maximum
Low = 0 minimum
0.8 maximum
(V =2.4 V) = 55 μA
Control terminals: Brass/Copper, Silver plated
WEIGHT (Typical): 3406-X:
V
IN
99 g (3.5 oz)
135 g (4.8 oz)
3408-X:
INPUT CURRENT:
I
I
IN IN
(V =3.85 V) = 280 μA
CONTROL CONFIGURATION:
IN IN
=25 mA maximum per cell
Standard Unit: One terminal is connected to case ground
and the remaining terminals are provided for activation of
individual cells. Attenuation is fail-safe to "0" setting in the
absence of a control voltage. Application of a voltage (+) to
a particular cell causes it to switch to the attenuate position.
SUPPLY CURRENT:
SUPPLY VOLTAGE:
I
CC
V
=+12.0 to +15 V
CC
MODELS WITH BUILT-IN DRIVERS: Most 3400s are avail-
able with an intelligent interface\driver cards. These are
designed to interface with our 8210A Series Controllers
which greatly simplifies computer control applications. Refer
to Model 3406T and 3408T data sheet for more information.
Units with TTL Option: Units with this options are supplied
with a very low profile connectorized TTL interface board
mounted directly to the control terminals. This TTL interface
option is available with a 10 pin ribbon cable connector and
is supplied with a mating connector. Refer to Physical
Dimensions for mating connector pin/wiring details. Two
wires are specified for supply voltage and ground. The
remaining wires will accept TTL control signals to activate or
de-activate a particular attenuation cell. A TTL high will
energize a cell to the high attenuation state, whereas a TTL
low will maintain a cell in its zero attenuation state.
To order 3400 Series Attenuators with this option add -1 to
basic model number for ribbon cable connector. Example:
Model 3406-63 with a TTL interface would be 3406-63-1.
103
5305 Spectrum Drive, Frederick, MD 21703-7362 ꢀ TEL: 301-846-9222, 800-638-2048 ꢀ Fax: 301-846-9116
web: www.aeroflex.com/weinschel ꢀ email: weinschel-sales@aeroflex.com
Revision Date: 3/4/09
Programmable Attenuators
PHYSICAL DIMENSIONS:
A
B
Aeroflex / Weinschel
C
D
Model No.
3408-X
No. Cells
A
B
C
D
8
136.1 (5.36)
123.4 (4.86)
7 EQ SPCS @ 15.20 (.60) = 106.7 (4.20)
128.5 (5.06)
3406-X
6
105.7 (3.66)
93.0 (3.66)
5 EQ SPCS @ 15.20 (.60) =76.0 (3.00)
98.0 (3.86)
NOTE: All dimensions are given in mm (inches) and are nominal, unless otherwise specified.
104
5305 Spectrum Drive, Frederick, MD 21703-7362 ꢀ TEL: 301-846-9222, 800-638-2048 ꢀ Fax: 301-846-9116
web: www.aeroflex.com/weinschel ꢀ email: weinschel-sales@aeroflex.com
Revision Date: 3/4/09
Programmable Attenuators
PHYSICAL DIMENSIONS:
TTL OPTION -1 (3406 & 3408)
Control Connector J3 Pin Locations:
TTL Conn
PIN No. (J3)
3408-103-1
dB (Cell)
3408-55.75-1
dB (Cell)
3406-55-1
dB (Cell )
1
2
24*
24
0.25
0.5
1
1
2
3
1
4
4
2
2
8
5
4
4
16
6
8
8
24
7
16
16
NC
NC
+Vcc
COM
8
24*
+Vcc
COM
24
9
+Vcc
COM
10
* 48 dB cell comprised of two 24 dB cells
NC = Not Connected
NOTE: All dimensions are given in mm (inches) and are nominal, unless otherwise specified.
105
5305 Spectrum Drive, Frederick, MD 21703-7362 ꢀ TEL: 301-846-9222, 800-638-2048 ꢀ Fax: 301-846-9116
web: www.aeroflex.com/weinschel ꢀ email: weinschel-sales@aeroflex.com
Revision Date: 3/4/09
相关型号:
34062-0001
5.00mm (.197") Pitch MX150™ Cable Sealed Female Connector, Single Row, 2Circuits, Polarization A, without Connector Position Assurance, Black
MOLEX
34062-0002
5.00mm (.197) Pitch MX150? Cable Sealed Female Connector, Single Row, 2Circuits, Polarization B, without Connector Position Assurance, Gray
MOLEX
34062-0005
5.00mm (.197) Pitch MX150? Cable Sealed Female Connector, Single Row, 2Circuits, Polarization A, with Connector Position Assurance, Black
MOLEX
34062-0006
5.00mm (.197") Pitch MX150™ Cable Sealed Female Connector, Single Row, 2Circuits, Polarization B, with Connector Position Assurance, Gray
MOLEX
34062-0009
5.00mm (.197") Pitch MX150™ Cable Sealed Female Connector, Single Row, 2Circuits, Polarization D, without Connector Position Assurance, Gray
MOLEX
34062-0010
5.00mm (.197") Pitch MX150™ Cable Sealed Female Connector, Single Row, 2Circuits, Polarization D, with Connector Position Assurance, Gray
MOLEX
©2020 ICPDF网 联系我们和版权申明