APL108733DC-TRG [ANPEC]
800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed; 800毫安低漏失快速响应正可调稳压器和固定
| 型号： | APL108733DC-TRG |
| 厂家： | 
ANPEC ELECTRONICS COROPRATION |
| 描述： | 800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed |
| 文件： | 总16页 (文件大小：360K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
APL1087
800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed
1.8V, 2.5V, and 3.3V
Features
General Description
·
·
·
·
·
·
·
·
·
·
Guaranteed Output Voltage Accuracy within 2%
The APL1087 is a low dropout three-terminal adjustable
regulators with 0.8A output current capability. In order to
obtain lower dropout voltage and faster transient
response, which is critical for low voltage applications,
the APL1087 has been optimized.
Fast Transient Response
Guaranteed Dropout Voltage at Multiple Currents
Load Regulation : 0.6% Typ.
The device is available in an adjustable version and fixed
output voltages of 1.8V, 2.5V, and 3.3V, the output avail-
able voltage range is from 1.25 to 7.15V with an input
supply below 9V. Dropout voltage is guaranteed at a maxi-
mum of 1.45V at 0.5A.
Line Regulation : 0.03% Typ.
Low Dropout Voltage : 1.3V Typ. at IOUT =500mA
Current-Limit : 0.8A Min. at TJ=125°C
On-Chip Thermal Limiting : 150 °C Typ.
Adjustable Output : 1.25~7.15V
Current limit is trimmed to ensure specified output cur-
rent and controlled short-circuit current. On-chip thermal
limiting provides protection against any combination of
overload that would create excessive junction
temperatures.
Standard 3-Pin SOT-89, SOT-223, TO-92, and
TO- 252 Power Packages.
·
Lead Free and Green Devices Available
(RoHS Compliant)
The APL1087 is available in the industry standard 3-pin
SOT-89, SOT-223, TO-92, and TO-252 power packages.
Simplified Application Circuits
Applications
·
·
·
·
·
·
·
Voltage Regulator for CD-ROM Drivers
Voltage Regulator for LAN Cards
Voltage Regulator for Mother Boards
Wireless Communication Systems
Portable Instrument
1.25V to 7.15V Adjustable Regulator
APL1087
VIN
IN
OUT
ADJ
VOUT
R1
121W
100mF
C*2
+
+
10mF
C1*
R2
Portable Consumer Equipment
Low Voltage Systems
* Needed if device is far from filter capacitors
R1+R2
VOUT = 1.250V´
Improving Ripple Rejection
R1
5V Regulator with Shutdown
APL1087
VIN
IN
OUT
ADJ
VOUT
+
APL1087
R1
+
10mF
VIN
IN
OUT
ADJ
5V
150mF
121W
1%
C*3
10mF
+
10mF
R2
+
1k
100mF
TTL
365W
1%
* C3 improves ripple rejection.
XC should be approximately
1k
equal to R1 at ripple frequency
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright ã ANPEC Electronics Corp.
1
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Ordering and Marking Information
Package Code
D : SOT-89
U : TO-252
APL1087
E : TO-92
V : SOT-223
Operating Ambient Temperature Range
Assembly Material
Handling Code
C : 0 to 70 oC
Handling Code
TB : Tape & Box
Voltage Code
18 : 1.8V
TR : Tape & Reel
25 : 2.5V 33 : 3.3V
Temperature Range
Package Code
Voltage Code
Blank : Adjustable Version
Assembly Material
G : Halogen and Lead Free Device
APL1087
APL1087 D/V/E :
- Date Code
XXXXX - Date Code
XXXXX
APL1087 U:
APL1087
XXXXX
XXXXX
18
APL1087
XXXXX
APL1087
APL1087-18D/V/E :
XXXXX18
- Date Code
- Date Code
XXXXX
XXXXX
XXXXX - Date Code
XXXXX - Date Code
APL1087-18U:
APL1087-25U:
25
APL1087
XXXXX
APL1087
APL1087-25D/V/E :
XXXXX25
33
APL1087
XXXXX
APL1087
APL1087-33D/V/E :
XXXXX33
XXXXX - Date Code
- Date Code
XXXXX
APL1087-33U:
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Pin Configurations
VOUT
VOUT
APL1087
1
2
3
1
2
3
ADJ/GND
VOUT
VIN
ADJ/GND
VOUT
VIN
SOT-89 (Front View)
SOT-223 (Front View)
VOUT
3
VIN
2
VOUT
1
2
3
1
ADJ/GND
ADJ/GND OUT IN
TO-92 (Top View)
TO-252 (Top View)
Copyright ã ANPEC Electronics Corp.
2
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Absolute Maximum Ratings
Symbol
Parameter
Rating
9
Unit
V
VI
Input Voltage
TSTG
TL
Storage Temperature Range
-65 ~ +150
260
°C
°C
Maximum Lead Soldering Temperature, 10 Seconds
Thermal Characteristics
Symbol
Parameter
Typical Value
Unit
Operating Junction Temperature Range
TJ
Control Section
Power Transistor
0 to 125
0 to 150
°C
Thermal Resistance from Junction to Ambient in Free Air
SOT-89
SOT-223
TO-92
180
75
180
62.5
qJA
°C/W
°C/W
TO-252
Thermal Resistance from Junction to Ambient in Free Air
SOT-89
SOT-223
TO-92
38
15
80
6
qJC
TO-252
Electrical Characteristics
APL1087
Typ.
Symbol
Parameter
Test Conditions
Unit
Min.
Max.
VREF
Reference Voltage
Output Voltage
1.225
1.250
1.275
V
10mA£ IOUT £0.5A, 3.1V£VIN£9V, TJ =0~125°C
APL1087-18 TJ =0~125°C, 0£ IOUT£ 0.5A, 3.25V£VIN£9V,
1.764
2.450
3.235
1.800
2.500
3.300
1.836
2.550
3.365
VOUT
V
APL1087-25
APL1087-33
TJ =0~125°C, 0£ IOUT£ 0.5A, 3.95V£VIN£9V,
TJ =0~125°C, 0£ IOUT£ 0.5A, 4.75V£VIN£9V,
TJ =0~125°C
Line Regulation
APL1087 IOUT=10mA, 3.1V£VIN £9V (Note1)
0.03
0.2
6
6
IOUT=0mA, 3.25V£VIN£9V (Note1)
IOUT=0A, 3.95V£VIN£9V (Note1)
IOUT=0A, 4.75V£VIN £ 9V (Note1)
TJ =0~125°C
REGLINE
APL1087-18
APL1087-25
APL1087-33
-
-
1
1
1
%
mV
6
Load Regulation
APL1087 (VIN –VOUT)=3V, 0£ IOUT £0.5A (Note1)
VIN=3.25V, 0£ IOUT £0.5A (Note1)
VIN=3.95V, 0£ IOUT £0.5A (Note1)
VIN=4.75V, 0£ IOUT £0.5A (Note1)
IOUT=0.5A ,TJ =0~125°C (Note 2)
)
REGLOAD
APL1087-18
APL1087-25
APL1087-33
0.4
0.6
%
VD
Dropout Voltage
-
1.3
-
1.45
-
V
ILIMIT
Current Limit
800
mA
(VIN -VOUT)=5V, TJ=25°C
IADJ
DIADJ
IO
Adjust Pin Current
-
-
-
60
0.2
1.7
120
(VIN -VOUT)=3V, IOUT=10mA, TJ=0~125°C
TJ=0~125°C, 10mA£ IOUT £0.5A, 1.45V£VIN -VOUT£7.55V
TJ=0~125°C, VIN =9V (Note 3)
mA
mA
Adjust Pin Current
Change
5
-
Minimum Load Current
mA
Copyright ã ANPEC Electronics Corp.
3
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Electrical Characteristics (Cont.)
APL1087
Typ.
Symbol
Parameter
Test Conditions
Unit
Min.
Max.
FRIPPLE=120Hz, VRIPPLE=1VP-P,
PSRR
Ripple Rejection
60
75
-
dB
(VIN -VOUT)=3V, TJ=0~125°C
TJ=25°C, 30ms Pulse
TR
TS
Thermal Regulation
Temperature Stability
Long -Term Stability
RMS Output Noise
-
-
-
-
-
0.01
0.5
0.02
%/ W
%
-
-
-
-
LS
0.3
%
TJ =125°C,1000Hrs.
VN
OT
0.003
150
%
TJ=25°C,10Hz£F£10kHz, (% of VOUT
)
Over Temperature Point
Quiescent Current
°C
TJ=0~125°C,
APL1087-18 VIN£9V
5.5
5.5
5.5
10
10
10
-
APL1087-25
APL1087-33
VIN£9V
VIN£9V
mA
Note : 1 : See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are mea-
sured at a constant junction temperature by low duty cycle pulse testing.
2 : Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/
output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage
curve.
3 : Minimum load current is defined as the minimum output current required to maintain regulation.
Copyright ã ANPEC Electronics Corp.
4
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Typical Operating Characteristics
Load Transient Response
Line Transient Response
10
5
3.5
3
50
40
30
20
10
0
7
6
5
4
3
2
1
0
VOUT=1.25V
0
2.5
2
VIN
-5
-10
-15
-20
-25
-30
1.5
1
0.5
0
IOUT
VOUT=3.3V
-10
-20
-0.5
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
0
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
2
Time (ms)
Time (ms)
Adjust Pin Current vs. Temperature
Current Limit vs. Temperature
62
61
60
59
58
57
56
55
940
920
900
880
860
840
820
800
780
760
VIN=5V
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature(°C)
Copyright ã ANPEC Electronics Corp.
5
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Typical Operating Characteristics (Cont.)
Reference Voltage vs. Temperature
Dropout Voltage vs. Temperature
1.255
1.25
1.245
1.5
1.45
1.4
1.35
IOUT=500mA
1.3
1.24
1.25
1.235
1.23
1.225
1.2
1.15
1.1
1.05
1
1.22
-50 -25
0
25 50 75 100 125 150
-50 -25
0
25 50 75 100 125 150
Temperature (°C)
Temperature (°C)
Output Voltage vs. Temperature
Output Voltage vs. Temperature
3.4
3.3
3.2
3.1
3
2.6
2.5
2.4
2.3
2.2
2.1
2
1.9
1.8
1.7
1.6
-50 -25
0
25
50
75 100 125
-50 -25
0
25
50
75 100 125
Temperature (°C)
Temperature (°C)
Copyright ã ANPEC Electronics Corp.
6
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Typical Operating Characteristics (Cont.)
Output Voltage vs. Input Voltage
Current Limit vs. Input Voltage
3.5
3
940
930
920
910
900
890
880
870
860
850
840
830
2.5
2
1.5
1
0.5
0
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
Input Voltage (V)
Input Voltage (V)
Load Regulation vs. Output Current
Dropout Voltage vs. Output Current
8
7
6
5
4
3
2
1
0
1.8
1.6
1.4
1.2
1
VOUT=1.25V
VIN=5V
0.8
0.6
0.4
100 200 300 400 500 600 700 800
Output Current (mA)
0
200
400
600
800
Output Current (mA)
Copyright ã ANPEC Electronics Corp.
7
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Package Information
SOT-89
D
A
C
D1
e
e1
B
B1
SOT-89
S
Y
M
B
O
MILLIMETERS
MIN. MAX.
INCHES
MIN.
MAX.
0.063
0.022
0.019
0.017
0.181
0.072
0.102
0.090
L
A
1.40
0.44
0.36
0.35
4.40
1.60
0.56
0.48
0.44
4.60
0.055
0.017
0.014
0.014
0.173
0.064
0.090
0.084
B
B1
C
D
D1
E
1.62
2.29
1.83
2.60
E1
e
2.13
2.29
1.50 BSC
3.00 BSC
0.059 BSC
0.118 BSC
e1
H
0.155
0.035
0.167
0.047
3.94
0.89
4.25
1.20
L
Note : Follow from JEDEC TO-243 AA.
Copyright ã ANPEC Electronics Corp.
8
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Package Information
SOT-223
D
b2
SEE
VIEW A
e
c
e1
GAUGE PLANE
SEATING PLANE
L
b
VIEW A
SOT-223
S
Y
M
B
O
MILLIMETERS
MIN. MAX.
INCHES
MIN.
MAX.
L
A
1.80
0.10
1.70
0.84
3.10
0.071
0.004
0.067
0.033
0.122
0.013
0.264
0.287
0.146
0.001
0.059
0.026
0.114
0.009
0.248
0.264
0.130
A1
A2
b
0.02
1.50
0.66
2.90
b2
c
0.23
6.30
6.70
3.30
0.33
6.70
D
E
7.30
3.70
E1
e
2.30 BSC
4.60 BSC
0.091 BSC
0.181 BSC
e1
L
0.75
0.030
0
10
0
10
0
Note : 1. Follow from JEDEC TO-261 AA.
2. Dimension D and E1 are determined at the outermost extremes
of the plastic exclusive of mold flash, tie bar burrs, gate burrs,
and interlead flash, but including any mismatch between the top
and bottom of the plastic body.
Copyright ã ANPEC Electronics Corp.
9
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Package Information
TO-92
D
j
e1
b
e
TO-92
S
Y
M
B
O
L
MILLIMETERS
INCHES
MIN.
4.32
0.41
4.45
3.18
MAX.
5.33
0.53
5.20
4.19
MIN.
MAX.
0.210
0.021
0.205
0.165
0.105
0.055
A
0.170
0.016
0.175
0.125
0.095
0.045
0.135
0.500
0.080
b
D
E
e
2.42
1.15
3.43
12.70
2.03
2.66
e1
1.39
4.00
j
0.157
0.591
0.105
L
S
15.00
2.66
Note : Follow from JEDEC TO-92.
Copyright ã ANPEC Electronics Corp.
10
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Package Information
TO-252
E
A
E1
c2
b3
c
b
e
SEE VIEW A
GAUGE PLANE
SEATING PLANE
L
VIEW A
TO-252
S
Y
M
B
O
L
MILLIMETERS
MIN.
INCHES
MAX.
2.39
0.13
0.89
5.46
0.61
MIN.
MAX.
0.094
0.005
0.035
0.215
0.024
0.035
0.245
A
2.18
0.086
A1
b
0.020
0.195
0.018
0.018
0.210
0.180
0.250
0.150
0.50
4.95
0.46
0.46
5.33
4.57
6.35
3.81
b3
c
c2
D
0.89
6.22
6.00
6.73
D1
E
0.236
0.265
E1
e
0.236
6.00
2.29 BSC
0.090 BSC
0.370
0.035
0.035
0.410
0.070
0.080
0.040
8°
9.40
0.90
0.89
10.41
1.78
2.03
1.02
8°
H
L
L3
L4
0
0°
0°
Note : Follow from JEDEC TO-252 .
Copyright ã ANPEC Electronics Corp.
11
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Carrier Tape & Reel Dimensions
P0
P2
P1
OD0
A
K0
A0
A
OD1
B
B
SECTION A-A
SECTION B-B
d
T1
Application
SOT-89
A
H
50 MIN.
P1
T1
C
d
D
W
E1
12.0±0.30 1.75±0.10
A0 B0
F
5.50±0.05
K0
12.4+2.00 13.0+0.50
-0.00 -0.20
178.0±2.00
P0
1.5 MIN.
D1
20.2 MIN.
P2 D0
T
1.5+0.10
-0.00
0.6+0.00
-0.40
4.0±0.10
A
8.0±0.10
H
2.0±0.05
4.80±0.20 4.50±0.20 1.80±0.20
1.5 MIN.
d
Application
SOT-223
T1
C
D
20.2 MIN.
T
W
E1
12.00±0.30 1.75±0.10
A0 B0
F
5.50±0.05
K0
12.4+2.00 13.0+0.50
-0.00 -0.20
320.0±2.00
P0
50 MIN.
P1
1.5 MIN.
D1
P2 D0
1.5+0.10
-0.00
0.6+0.00
-0.40
4.00±0.10 8.00±0.10 2.00±0.50
6.90±0.20 7.50±0.20 2.10±0.20
1.5 MIN.
d
Application
TO-252
A
H
T1
C
D
20.2 MIN.
T
W
E1
16.0±0.30 1.75±0.10
A0 B0
F
7.50±0.05
K0
16.4+2.00 13.0+0.50
-0.00 -0.20
330.0±2.00
P0
50 MIN.
P1
1.5 MIN.
D1
P2 D0
1.5+0.10
-0.00
0.6+0.00
-0.40
4.0±0.10
8.0±0.10
2.0±0.05
6.80±0.20 10.40±0.20 2.50±0.20
1.5 MIN.
(mm)
Copyright ã ANPEC Electronics Corp.
12
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Carrier Tape & Box Dimensions
Devices Per Unit
Package Type
SOT-89
Unit
Quantity
1000
Tape & Reel
Tape & Reel
Tape & Reel
Tape & Box
TO-252
2500
SOT-223
TO-92
2500
2000
Taping Direction Information
SOT-89
USER DIRECTION OF FEED
Copyright ã ANPEC Electronics Corp.
13
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Taping Direction Information (Cont.)
SOT-223
USER DIRECTION OF FEED
TO-252
USER DIRECTION OF FEED
Copyright ã ANPEC Electronics Corp.
14
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Reflow Condition (IR/Convection or VPR Reflow)
tp
TP
Critical Zone
TL to TP
Ramp-up
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
°
t 25 C to Peak
Time
Reliability Test Program
Test item
SOLDERABILITY
Method
MIL-STD-883D-2003
Description
245°C, 5 sec
HOLT
PCT
TST
ESD
Latch-Up
MIL-STD-883D-1005.7
JESD-22-B,A102
MIL-STD-883D-1011.9
MIL-STD-883D-3015.7
JESD 78
1000 Hrs Bias @125°C
168 Hrs, 100%RH, 121°C
-65°C~150°C, 200 Cycles
VHBM > 2KV, VMM > 200V
10ms, 1tr > 100mA
Classification Reflow Profiles
Profile Feature
Sn-Pb Eutectic Assembly
Pb-Free Assembly
Average ramp-up rate
(TL to TP)
Preheat
3°C/second max.
3°C/second max.
100°C
150°C
60-120 seconds
150°C
200°C
60-180 seconds
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (min to max) (ts)
Time maintained above:
- Temperature (TL)
183°C
60-150 seconds
217°C
60-150 seconds
- Time (tL)
Peak/Classification Temperature (Tp)
See table 1
See table 2
Time within 5°C of actual
Peak Temperature (tp)
10-30 seconds
20-40 seconds
Ramp-down Rate
6°C/second max.
6°C/second max.
6 minutes max.
8 minutes max.
Time 25°C to Peak Temperature
Notes: All temperatures refer to topside of the package. Measured on the body surface.
Copyright ã ANPEC Electronics Corp.
15
www.anpec.com.tw
Rev. A.9 - Dec., 2008
APL1087
Classification Reflow Profiles (Cont.)
Table 1. SnPb Eutectic Process – Package Peak Reflow Temperatures
Package Thickness
Volume mm3
<350
Volume mm3
350
<2.5 mm
³ 2.5 mm
240 +0/-5°C
225 +0/-5°C
225 +0/-5°C
225 +0/-5°C
Table 2. Pb-free Process – Package Classification Reflow Temperatures
Package Thickness
Volume mm3
<350
Volume mm3
350-2000
Volume mm3
>2000
<1.6 mm
1.6 mm – 2.5 mm
³ 2.5 mm
260 +0°C*
260 +0°C*
250 +0°C*
260 +0°C*
250 +0°C*
245 +0°C*
260 +0°C*
245 +0°C*
245 +0°C*
*Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated
classification temperature (this means Peak reflow temperature +0°C. For example 260°C+0°C) at the rated MSL
level.
Customer Service
Anpec Electronics Corp.
Head Office :
No.6, Dusing 1st Road, SBIP,
Hsin-Chu, Taiwan, R.O.C.
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
2F, No. 11, Lane 218, Sec 2 Jhongsing Rd.,
Sindian City, Taipei County 23146, Taiwan, R. O. C.
Tel : 886-2-2910-3838
Fax : 886-2-2917-3838
Copyright ã ANPEC Electronics Corp.
16
www.anpec.com.tw
Rev. A.9 - Dec., 2008
相关型号：
APL1087E
800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V and 3.3V
ANPEC
APL1087E-18DC-TR
800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V and 3.3V
ANPEC
APL1087E-18DC-TRL
800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V and 3.3V
ANPEC
APL1087E-18DC-TU
800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V and 3.3V
ANPEC
APL1087E-18DC-TUL
800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V and 3.3V
ANPEC
APL1087E-18EC-TR
800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V and 3.3V
ANPEC
©2020 ICPDF网 联系我们和版权申明