APL108618GC-TUG [ANPEC]
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V; 1.5A低压差快速响应正可调稳压器和固定1.8V ， 2.5V ， 2.85V ， 3.3V和
| 型号： | APL108618GC-TUG |
| 厂家： | 
ANPEC ELECTRONICS COROPRATION |
| 描述： | 1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V |
| 文件： | 总15页 (文件大小：229K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
APL1086
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed
1.8V, 2.5V, 2.85V, and 3.3V
Improving Ripple Rejection
Features
APL1086
·
·
·
·
·
·
·
·
·
·
Guaranteed Output Voltage Accuracy within 2%
VIN
10m F
IN
OUT
VOUT
R1
+
ADJ
Fast Transient Response
121W
1%
150m F
Guaranteed Dropout Voltage at Multiple Currents
Load Regulation : 0.1%Typ.
R2
C1
10m F
+
365W
1%
Line Regulation : 0.03%Typ.
* C1 improves ripple rejection.
XC should be approximately
equal to R1 at ripple frequency
Low Dropout Voltage : 1.3V Typ. at IOUT =1.5A
Current Limit : 1.5A Min. at TJ=125 °C
On-Chip Thermal Limiting : 150 °C Typ.
Adjustable Output : 1.25~10.7V
General Description
The APL1086 is a low dropout three-terminal adjustable
regulators with 1.5A output current capability. In order to
obtain lower dropout voltage and faster transient
response, which is critical for low voltage applications,
the APL1086 has been optimized.
Standard 3-pin SOT-223, TO-252 , TO-220, and
TO-263 Power Packages
·
Lead Free and Green Devices Available
(RoHS Compliant)
The device is available in an adjustable version and fixed
output voltages of 1.8V, 2.5V, 2.85V, and 3.3V, the output
available voltage range is from 1.25 to 10.7V with an input
supply below 12V. Dropout voltage is guaranteed at a
maximum of 1.45V at 1.5A.
Simplified Application Circuits
1.25V to 10.7V Adjustable Regulator
APL1086
VIN
IN
OUT
VOUT1
R1
ADJ
Current limit is trimmed to ensure specified output cur-
rent and controlled short-circuit current. On-chip thermal
limiting provides protection against any combination of
overload that would create excessive junction
temperatures.
121W
100m F
C2
+
+
10m F
C1*
R2
1k
The APL1086 is available in the industry standard 3-pin
SOT-223, TO-252, TO-220, or TO-263 power packages.
* Needed if device is far from filter capacitors
R1 + R2
VOUT = 1.250V
´
R1
5V Regulator with Shutdown
APL1086
Applications
VIN
IN
OUT
5V
·
·
·
·
Active SCSI Terminators
ADJ
121W
+
Low Voltage Logic Supplies
1%
10m F
+
1k
Battery-Powered Circuitry
100m F
TTL
365W
1%
Post Regulator for Switching Power Supply
1k
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright ã ANPEC Electronics Corp.
1
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Ordering and Marking Information
Package Code
F : TO-220
APL1086 -
G : TO-263
U : TO-252
Operating Ambient Temperature Range
C : 0 to 70 oC
V : SOT-223
Assembly Material
Handling Code
Handling Code
Temperature Range
Package Code
TU : Tube
Voltage Code
18 : 1.8V
Blank : Adjustable Version
Assembly Material
TR : Tape & Reel
25 : 2.5V 285 : 2.85V
33 : 3.3V
Voltage Code
G : Halogen and Lead Free Device
APL1086
XXXXX
- Date Code
- Date Code
XXXXX
XXXXX
APL1086 F/G/U :
APL1086 V :
XXXXX - Date Code
XXXXX - Date Code
APL1086
XXXXX
18
APL1086
XXXXX
APL1086
XXXXX18
APL1086 -18F/G/U:
APL1086- 18V :
25
APL1086
XXXXX
APL1086
XXXXX25
XXXXX
APL1086- 25V :
XXXXX - Date Code
XXXXX - Date Code
APL1086 -25F/G/U:
APL1086 -285F/G/U:
- Date Code
285
APL1086
XXXXX
APL1086
XXXXX285
XXXXX - Date Code
APL1086- 285V :
APL1086- 33V :
33
APL1086
XXXXX
APL1086
XXXXX33
APL1086 -33F/G/U:
- Date Code
XXXXX - Date Code
XXXXX
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Pin Configurations
TAB IS VOUT
TAB IS VOUT
3
2
VIN
VOUT
ADJ
1
Front View for TO-220
1
2
3
1
2
3
VIN
3
ADJ/GND
OUT
IN
ADJ/GND
OUT
IN
VOUT
2
1
TAB is VOUT
ADJ
Front View for SOT-223
Front View for TO-252
Front View for TO-263
Copyright ã ANPEC Electronics Corp.
2
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Absolute Maximum Ratings (Note 1,2)
Symbol
Parameter
Rating
Unit
VI
Input Voltage
15
V
Power Dissipation, TA=25°C
PD
1.7
2
W
SOT-223
TO-252
Thermal Resistance from Junction to Ambient in Free Air
qJA
SOT-223
TO-252
60
50
°
C/W
TJ
TSTG
TL
Operating Junction Temperature Range
Storage Temperature Range
0 to 150
-65 to +150
260
°
C
°
C
°
C
Maximum Lead Soldering Temperature, 10 Seconds
Note 1: Stresses beyond the absolute maximum rating may damage the device and operating in the absolute maximum rating conditions
may affect device reliability.
Note 2: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using:
PD (max) = (TJ – TA) / qJA; TJ = 125°C. Exceeding the maximum allowable power dissipation will result in excessive die
temperature.
Electrical Characteristics
APL1086
Symbol
Parameter
Test Conditions
Unit
Min.
Typ.
Max.
10mA£ IOUT£1.5A,
1.4V£(VIN -VOUT) £9.75V, TJ =0~125°C
VREF
Reference Voltage
Output Voltage
1.225
1.250
1.275
V
1.782
1.764
1.800
1.800
1.818
1.836
TJ =25°C, IOUT =0mA,
TJ =0~125°C,
APL1086-18
0£ IOUT£ 1.5A, 3.5V£VIN£9V,
2.475
2.450
2.500
2.500
2.525
2.550
TJ =25°C, IOUT =0mA,
TJ =0~125°C,
0£ IOUT£ 1.5A, 4V£VIN£9V,
TJ =25°C, IOUT =0mA,
TJ =0~125°C,
0£ IOUT£ 1.5A, 4.25V£VIN£9V,
TJ =25°C, IOUT =0mA,
TJ =0~125°C,
APL1086-25
APL1086-28
APL1086-33
VOUT
V
2.822
2.792
2.850
2.850
2.878
2.910
3.267
3.235
3.333
3.365
3.3003.
300
0£ IOUT£ 1.5A, 4.75V£VIN£9V,
TJ =0~125°C
Line Regulation
-
IOUT=10mA, 1.5V£VIN –VOUT£9V (Note3)
APL1086
0.03
1
0.2
6
%
IOUT=0mA, 3.5V£VIN£9V (Note3)
IOUT=0A, 4V£VIN£9V (Note3)
IOUT=0A, 4.25V£VIN £9V (Note3)
IOUT=0A, 4.75V£VIN£ 9V (Note3)
APL1086-18
-
-
-
-
REGLINE
APL1086-25
APL1086-28
APL1086-33
1
1
1
6
6
6
mV
Load Regulation
TJ =0~125°C
-
(VIN -VOUT)=3V, 0£ IOUT £1.5A (Note3)
APL1086
0.1
1
0.4
10
%
VIN =3.5V, 0£ IOUT £1.5A (Note3)
VIN =4V, 0£ IOUT £1.5A (Note3)
VIN =4.25V, 0£ IOUT£1.5A (Note3)
VIN =4.75V, 0£ IOUT £1.5A (Note3)
APL1086-18
-
-
-
-
REGLOAD
APL1086-25
APL1086-28
APL1086-33
1
1
1
10
10
10
mV
Copyright ã ANPEC Electronics Corp.
3
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Electrical Characteristics (Cont.)
APL1086
Symbol
Parameter
Test Conditions
Unit
Min.
-
Typ.
1.3
-
Max.
1.45
-
IOUT=1.5A ,TJ =0~125°C (Note4)
(VIN -VOUT)=5V, TJ =25°C
VD
Dropout Voltage
V
ILIMIT
Current Limit
1500
mA
(VIN -VOUT)=3V, IOUT=10mA,
TJ =0~125°C
IADJ
Adjust Pin Current
-
60
120
mA
TJ=0~125°C, 10mA£ IOUT £1.5A,
1.4V£( VIN -VOUT) £7.75V
TJ =0~125°C, (VIN -VOUT)=7.75V, (Note 5)
Adjust Pin Current Change
Minimum Load Current
Ripple Rejection
-
-
0.2
1.7
75
5
-
DIADJ
IO
mA
mA
dB
FRIPPLE=120Hz, VRIPPLE=1VP-P,
(VIN -VOUT)=3V, TJ =0~125°C
PSRR
60
-
TR
TS
LS
VN
Thermal Regulation
Temperature Stability
Long -Term Stability
RMS Output Noise
-
-
-
-
-
-
-
0.01
0.5
0.02
%/ W
%
TJ =25°C, 30ms Pulse
-
-
-
-
-
-
0.3
%
TJ =125°C,1000Hrs.
0.003
15
%
TJ=25°C,10Hz£F£10kHz, (% of VOUT
at Tab, SOT-223
)
Thermal Resistance from
Junction to Case
qJC
°C/ W
°C
at Tab, TO-252
6
OT
Over Temperature Point
150
Quiescent Current
APL1086-18
TJ=0~125°C,
VIN£9V
-
5.5
5.5
10
10
APL1086-25
APL1086-28
APL1086-33
-
-
-
VIN£9V
VIN£9V
VIN£9V
mA
5.5
5.5
10
10
Note 3: See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are
measured at a constant junction temperature by low duty cycle pulse testing.
Note 4: Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/
output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage curve.
Note 5: Minimum load current is defined as the minimum output current required to maintain regulation.
Copyright ã ANPEC Electronics Corp.
4
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Typical Operating Characteristics
Load Transient Response
Line Transient Response
5
4.5
4
0.02
0.01
0
6
5
4
3
2
1
0
0.15
0.1
C =10mF
CoINut=10mF Tantalum
VIN=5V
3.5
3
C =10mF
CoINut=10mF Tantalum
IOUT=0.1A
2.5
2
0.05
-0.01
-0.02
-0.03
1.5
1
0
0.5
0
-0.05
180
-
130
-20
30
80
0 100 200300 400 500 600 700 800 900
100
Time (ms)
Time (ms)
Dropout Voltage vs. Output Current
Output Voltage vs. Input Voltage
3.5
3
1.35
1.3
1.25
1.2
2.5
2
1.15
1.1
1.5
1
1.05
1
0.5
0
0.95
0.9
0
1
2
3
4
5
6
7
8
9
0
0.5
1
1.5
Output Current (A)
Input Voltage (V)
Copyright ã ANPEC Electronics Corp.
5
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Typical Operating Characteristics (Cont.)
Input Current vs. Input Voltage
Current Limit vs. Input Voltage
3.4
6
Vout=1.25V
5
2.9
4
2.4
3
1.9
2
1
1.4
0
0.9
0
2
4
6
8
10
0
3
6
9
12
Input Voltage (V)
Input Voltage (V)
Output Voltage vs. Temperature
Output Voltage vs. Temperature
2.6
3.4
2.5
2.4
2.3
2.2
2.1
2
3.3
3.2
3.1
3.0
2.9
1.9
1.8
1.7
1.6
2.8
2.7
-50 -25
0
25
50
75 100 125
-50 -25
0
25
50
75
100 125
Temperature (°C)
Temperature (°C)
Copyright ã ANPEC Electronics Corp.
6
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Typical Operating Characteristics (Cont.)
Adjustable Pin Current vs. Temperature
Input Current vs. Temperature
68
8
7
6
64
60
56
52
5
4
3
2
-50 -25
0
25
50
75 100 125
-50 -25
0
50
75 100 125
25
Temperature (°C)
Temperature (°C)
Current Limit vs. Temperature
2.9
Vin-Vout=5V
2.7
2.5
2.3
2.1
1.9
1.7
1.5
-50 -30 -10 10 30 50 70 90 110 130 150
Temperature (°C)
Copyright ã ANPEC Electronics Corp.
7
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Package Information
SOT-223
D
b2
SEE
VIEW A
e
c
e1
GAUGE PLANE
SEATING PLANE
L
b
VIEW A
SOT-223
S
Y
M
B
O
MILLIMETERS
MIN. MAX.
INCHES
MIN.
MAX.
L
A
1.80
0.10
1.70
0.84
3.10
0.071
0.004
0.067
0.033
0.122
0.013
0.264
0.287
0.146
0.001
0.059
0.026
0.114
0.009
0.248
0.264
0.130
A1
A2
b
0.02
1.50
0.66
2.90
b2
c
0.23
6.30
6.70
3.30
0.33
6.70
D
E
7.30
3.70
E1
e
2.30 BSC
4.60 BSC
0.091 BSC
0.181 BSC
e1
L
0.75
0.030
0
10
0
10
0
Note : 1. Follow from JEDEC TO-261 AA.
2. Dimension D and E1 are determined at the outermost extremes
of the plastic exclusive of mold flash, tie bar burrs, gate burrs,
and interlead flash, but including any mismatch between the top
and bottom of the plastic body.
Copyright ã ANPEC Electronics Corp.
8
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Package Information
TO-252-3
E
A
E1
c2
b3
c
b
e
SEE VIEW A
GAUGE PLANE
SEATING PLANE
L
VIEW A
TO-252-3
S
Y
M
B
O
L
MILLIMETERS
MIN.
INCHES
MAX.
2.39
0.13
0.89
5.46
0.61
MIN.
MAX.
0.094
0.005
0.035
0.215
0.024
0.035
0.245
A
2.18
0.086
A1
b
0.020
0.195
0.018
0.018
0.210
0.180
0.250
0.150
0.50
4.95
0.46
0.46
5.33
4.57
6.35
3.81
b3
c
c2
D
0.89
6.22
6.00
6.73
D1
E
0.236
0.265
E1
e
0.236
6.00
2.29 BSC
0.090 BSC
0.370
0.035
0.035
0.410
0.070
0.080
0.040
8°
9.40
0.90
0.89
10.41
1.78
2.03
1.02
8°
H
L
L3
L4
0
0°
0°
Note : Follow JEDEC TO-252 .
Copyright ã ANPEC Electronics Corp.
9
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Package Information
TO-220
E
A
E2
A1
E1
E/2
A2
b
e
c
b2
S
Y
M
B
O
L
TO-220
MILLIMETERS
INCHES
MIN.
3.56
0.51
2.03
0.38
1.14
0.36
MAX.
4.83
1.40
2.92
1.02
1.78
0.61
MIN.
MAX.
A
0.140
0.020
0.080
0.015
0.045
0.014
0.560
0.330
0.480
0.380
0.270
0.190
0.055
0.115
0.040
0.070
0.024
0.650
0.355
0.507
0.420
0.350
0.030
A1
A2
b
b2
c
D
14.22
8.38
16.51
9.02
D1
D2
E
12.19
9.65
12.88
10.67
8.89
E1
E2
6.86
0.76
e
H1
L
2.54 BSC
0.100 BSC
0.230
0.500
0.270
0.580
0.250
0.161
0.135
5.84
6.86
14.73
6.35
4.09
3.43
12.70
L1
P
0.139
0.100
3.53
2.54
Q
Note: Follow JEDEC TO-220 AB.
Copyright ã ANPEC Electronics Corp.
10
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Package Information
TO-263-3
A
E1
c2
E
b
b2
c
e
SEE VIEW A
SEATING PLANE
GAUGE PLANE
L
VIEW A
S
Y
M
TO-263
MILLIMETERS
MIN.
INCHES
B
O
MAX.
4.83
0.25
0.99
1.78
0.74
MIN.
MAX.
0.190
0.010
0.039
0.070
0.029
0.065
0.380
0.354
0.450
0.354
L
A
4.06
0.160
0.000
0.020
0.045
0.015
0.045
0.330
0.236
0.380
0.245
A1
b
0.00
0.51
1.14
0.38
b2
c
c2
D
1.14
8.38
6.00
9.65
6.22
1.65
9.65
9.00
11.43
9.00
D1
E
E1
e
2.54 BSC
0.100 BSC
14.61
1.78
15.88
2.79
1.68
1.78
0.575
0.070
0.625
0.110
0.066
0.070
H
L
L1
L2
q
o
o
o
o
0
8
0
8
Note : Follow JEDEC TO-263 AB.
Copyright ã ANPEC Electronics Corp.
11
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Carrier Tape & Reel Dimensions
P0
P2
P1
OD0
A
K0
A0
A
OD1
B
B
SECTION A-A
SECTION B-B
d
T1
Application
TO-263
A
H
T1
C
d
D
W
E1
F
24.4+2.00 13.0+0.50
-0.00 -0.20
330.0±2.00 50 MIN.
P0 P1
1.5 MIN. 20.2 MIN. 24.0±0.30 1.75±0.10 11.5±0.10
P2 D0
4.0±0.10 16.0±0.10 2.0±0.10
T1
D1
1.5 MIN.
d
T
A0
10.8±0.20 16.1±0.20 5.2±0.20
E1
B0
K0
1.5+0.10
-0.00
0.6+0.00
-0.40
Application
TO-252
A
H
C
D
W
F
16.4+2.00 13.0+0.50
330.0±2.00 50 MIN.
P0 P1
4.0±0.10 8.0±0.10 2.0±0.05
T1
1.5 MIN. 20.2 MIN. 16.0±0.30 1.75±0.10 7.50±0.05
-0.00
-0.20
P2
D0
1.5+0.10
-0.00
D1
T
A0
6.80±0.20 10.40±0.20 2.50±0.20
E1
B0
K0
0.6+0.00
-0.40
1.5 MIN.
Application
SOT-223
A
H
C
d
D
W
F
(
12.4+2.00 13.0+0.50
320.0±2.00 50 MIN.
P0 P1
4.00±0.10 8.00±0.10 2.00±0.50
1.5 MIN. 20.2 MIN. 12.00±0.301.75±0.10 5.50±0.05
-0.00
-0.20
P2
D0
1.5+0.10
-0.00
D1
T
A0
B0
K0
0.6+0.00
-0.40
1.5 MIN.
6.90±0.20 7.50±0.20 2.10±0.20
(mm)
Copyright ã ANPEC Electronics Corp.
12
www.anpec.com.tw
Rev. A.8 - Dec., 2008
(
APL1086
Devices Per Unit
Package Type
Unit
Quantity
800
TO-263
Tape & Reel
Tape & Reel
Tape & Reel
TO-252
2500
SOT-223
2500
Taping Direction Information
TO-263
USER DIRECTION OF FEED
TO-252
USER DIRECTION OF FEED
SOT-223
USER DIRECTION OF FEED
Copyright ã ANPEC Electronics Corp.
13
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Reflow Condition (IR/Convection or VPR Reflow)
tp
TP
Critical Zone
TL to TP
Ramp-up
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
°
t 25 C to Peak
Time
Reliability Test Program
Test item
Method
Description
SOLDERABILITY
HOLT
PCT
TST
ESD
MIL-STD-883D-2003
245°C, 5 sec
MIL-STD-883D-1005.7
JESD-22-B,A102
MIL-STD-883D-1011.9
MIL-STD-883D-3015.7
JESD 78
1000 Hrs Bias @125°C
168 Hrs, 100%RH, 121°C
-65°C~150°C, 200 Cycles
VHBM > 2KV, VMM > 200V
10ms, 1tr > 100mA
Latch-Up
Classification Reflow Profiles
Profile Feature
Sn-Pb Eutectic Assembly
Pb-Free Assembly
Average ramp-up rate
(TL to TP)
Preheat
3°C/second max.
3°C/second max.
100°C
150°C
60-120 seconds
150°C
200°C
60-180 seconds
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (min to max) (ts)
Time maintained above:
- Temperature (TL)
183°C
60-150 seconds
217°C
60-150 seconds
- Time (tL)
Peak/Classification Temperature (Tp)
See table 1
See table 2
Time within 5°C of actual
Peak Temperature (tp)
10-30 seconds
20-40 seconds
Ramp-down Rate
6°C/second max.
6°C/second max.
6 minutes max.
8 minutes max.
Time 25°C to Peak Temperature
Notes: All temperatures refer to topside of the package. Measured on the body surface.
Copyright ã ANPEC Electronics Corp.
14
www.anpec.com.tw
Rev. A.8 - Dec., 2008
APL1086
Classification Reflow Profiles (Cont.)
Table 1. SnPb Eutectic Process – Package Peak Reflow Temperatures
Package Thickness
Volume mm3
<350
Volume mm3
350
<2.5 mm
³ 2.5 mm
240 +0/-5°C
225 +0/-5°C
225 +0/-5°C
225 +0/-5°C
Table 2. Pb-free Process – Package Classification Reflow Temperatures
Package Thickness
Volume mm3
<350
Volume mm3
350-2000
Volume mm3
>2000
<1.6 mm
1.6 mm – 2.5 mm
³ 2.5 mm
260 +0°C*
260 +0°C*
250 +0°C*
260 +0°C*
250 +0°C*
245 +0°C*
260 +0°C*
245 +0°C*
245 +0°C*
*Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated
classification temperature (this means Peak reflow temperature +0°C. For example 260°C+0°C) at the rated MSL
level.
Customer Service
Anpec Electronics Corp.
Head Office :
No.6, Dusing 1st Road, SBIP,
Hsin-Chu, Taiwan, R.O.C.
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
2F, No. 11, Lane 218, Sec 2 Jhongsing Rd.,
Sindian City, Taipei County 23146, Taiwan, R. O. C.
Tel : 886-2-2910-3838
Fax : 886-2-2917-3838
Copyright ã ANPEC Electronics Corp.
15
www.anpec.com.tw
Rev. A.8 - Dec., 2008
相关型号：
APL108618UC-TRG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108618UC-TUG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108618VC-TRG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108618VC-TUG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108625FC-TRG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108625FC-TUG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108625GC-TRG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108625GC-TUG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108625UC-TRG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108625UC-TUG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108625VC-TRG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
APL108625VC-TUG
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V, 2.85V, and 3.3V
ANPEC
©2020 ICPDF网 联系我们和版权申明