C100N50Z4 [ANAREN]

Surface Mount Termination 100 Watts, 50ヘ; 表面贴装端接100瓦, 50ヘ
C100N50Z4
型号: C100N50Z4
厂家: ANAREN MICROWAVE    ANAREN MICROWAVE
描述:

Surface Mount Termination 100 Watts, 50ヘ
表面贴装端接100瓦, 50ヘ

文件: 总2页 (文件大小:314K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Model C100N50Z4  
Surface Mount Termination  
100 Watts, 50  
Description  
The C100N50Z4 is high performance Aluminum Nitride (AlN) surface  
mount termination intended as a cost competitive alternative to Beryllium  
Oxide (BeO). The termination is well suited to all cellular frequency  
bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high  
power handling makes the part ideal for terminating high power 90  
degree couplers, and for use in microstrip circuits. The termination is  
also RoHS compliant!  
General Specifications  
Features:  
RoHS Compliant  
100 Watts  
DC – 4.0 GHz  
AlN Ceramic  
Resistive Element  
Substrate  
Thick film  
AlN Ceramic  
Matte Tin over Nickel Barrier  
-55 to +125°C (see de rating chart)  
Terminal Finish  
Operating Temperature  
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed  
applicable portions of MIL-E-5400. All dimensions in inches.  
Electrical Specifications  
Non-Nichrome Resistive  
Resistance Value:  
Power:  
Frequency Range:  
50 Ohms, ± 2%  
100 Watts  
DC – 4.0 GHz  
>24 dB DC - 2.7 GHz  
>20 dB DC - 4.0 GHz  
Element  
Low VSWR  
100% Tested  
Small Size  
Return Loss  
Specification based on unit properly installed using suggested mounting instructions  
and a 50 ohm nominal impedance. Specifications subject to change.  
Outline Drawing  
C100N50Z4 (097) rev.C pg. 1 of 2  
USA/Canada:  
Toll Free:  
(315) 432-8909  
(800) 544-2414  
+44 2392-232392  
Available on Tape  
and Reel For Pick and  
Place Manufacturing.  
Europe:  
Model C100N50Z4  
ROHS  
Compliant  
Typical Performance:  
Power De-rating:  
Tape & Reel:  
Mounting Footprint and Procedure:  
C100N50Z4 (097) rev.C pg. 2 of 2  
USA/Canada:  
Toll Free:  
Europe:  
(315) 432-8909  
(800) 544-2414  
+44 2392-232392  
Available on Tape and  
Reel For Pick and Place  
Manufacturing.  

相关型号:

C100N50Z4A

RF/Microwave Termination
ANAREN

C100N50Z4B

RF/Microwave Termination,
ANAREN

C100X019KBT

Thermal Transfer Component Labels
PANDUIT

C100X019KCT

Thermal Transfer Component Labels
PANDUIT

C100X025CBT

Thermal Transfer Component Labels
PANDUIT

C100X025KBT

Thermal Transfer Component Labels
PANDUIT

C100X025KCT

Thermal Transfer Component Labels
PANDUIT

C100X025YJC

P1™ General Component Label Cassettes for PanTher™ LS8E Hand-Held Thermal Transfer Printers
PANDUIT

C100X025YJJ

SEE TABLE
PANDUIT

C100X025YJT

Thermal Transfer Component Labels
PANDUIT

C100X038CBT

Thermal Transfer Component Labels
PANDUIT

C100X038KBT

Thermal Transfer Component Labels
PANDUIT