B0430J50100AHF_14 [ANAREN]
Ultra Low Profile 0805 Balun 50 to 100 Balanced;型号: | B0430J50100AHF_14 |
厂家: | ANAREN MICROWAVE |
描述: | Ultra Low Profile 0805 Balun 50 to 100 Balanced |
文件: | 总5页 (文件大小:319K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Model B0430J50100AHF
Rev A
Ultra Low Profile 0805 Balun
50ꢀ to 100ꢀ Balanced
Description
The B0430J50100AHF is a low cost, low profile subꢀminiature unbalanced to
balanced transformer designed specifically for differential inputs and output
locations on next generation A to D and D to A Converter IC’s in an easy to use
surface mount package, covering 400 MHz–3000 MHz. The B0430J50100AHF is
ideal for high volume manufacturing and delivers higher performance than traditional
wire wound baluns. The B0430J50100AHF has an unbalanced port impedance of
50ꢀ and a 100ꢀ balanced port impedance. This transformation enables single
ended signals to be applied to differential ports. The output ports have equal
amplitude (ꢀ3dB) with 180 degree phase differential. The B0430J50100AHF is
available on tape and reel for pick and place high volume manufacturing.
Note that for optimal performance, the B0430J50100AHF should be used with a 10
pF series capacitor on the unbalanced port as shown in p. 2 & 3.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min.
Typ.
Max
Unit
MHz
ꢁ
• 400 – 3000 MHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 50 Ohm
• Low Insertion Loss
• Designed for AꢁD and DꢁA
Converters
Frequency
400
3000
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
50
100
9.9
3.4
0.7
7
ꢁ
8.4
dB
Insertion Loss*
4.0
1.4
12
dB
• Surface Mountable
• Tape & Reel
• Nonꢁconductive Surface
• RoHS Compliant
• Halogen Free
Amplitude Balance
Phase Balance
CMRR
dB
Degrees
dB
25
Power Handling
Operating Temperature
1
Watts
ºC
ꢀ55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
TOP VIEW (Near Side)
2.04±0.10
SIDE VIEW
BOTTOM VIEW (Far Side)
4x 0.37
0.70±0.05
3
1
2
2x 0.15
1.29±0.10
6x 0.98
6x
0.22
5
4
6
6x
0.30
Orientation Marker
Denotes Pin Location
Orientation Marker
Denotes Pin Location
4x 0.65
Pin Designation
1
2
3
4
5
6
GND
Unbalanced Port
GND
Balanced Port
NC
Balanced Port
Mechanical Outline
ꢀDimensions are in Millimeters
ꢀTolerences are NonꢀCumulative
USA/Canada: (315) 432ꢀ8909
Toll Free: (800) 411ꢀ6596
Europe: +44 2392ꢀ232392
Asia: +86 512ꢀ62749282
Visit us at
www.Anaren.com
Model B0430J50100AHF
Rev A
Typical Performance: 300 MHz. to 3100 MHz. with an external 10 pF capacitor
Unbalanced Port 50ꢀ
Return Loss ꢁ Input
0
ꢀ3
ꢀ6
ꢀ9
ꢀ12
ꢀ15
ꢀ18
ꢀ21
ꢀ24
ꢀ27
ꢀ30
ꢀ33
ꢀ36
Balanced Port 50ꢀ Balanced Port 50ꢀ
Frequency [MHz]
Schematic of BD0430J50100AHF with 10 pF capacitor on
unbalanced port (pin #2)
Insertion Loss
Amplitude Balance
0
ꢀ0.3
ꢀ0.6
ꢀ0.9
ꢀ1.2
ꢀ1.5
ꢀ1.8
ꢀ2.1
ꢀ2.4
ꢀ2.7
ꢀ3
2
1.5
1
0.5
0
ꢀ0.5
ꢀ1
ꢀ1.5
ꢀ2
ꢀ3.3
ꢀ3.6
Frequency [MHz]
Frequency [MHz]
CMRR
Phase Balance
0
ꢀ3
20
15
10
5
ꢀ6
ꢀ9
ꢀ12
ꢀ15
ꢀ18
ꢀ21
ꢀ24
ꢀ27
ꢀ30
ꢀ33
ꢀ36
0
ꢀ5
ꢀ10
ꢀ15
ꢀ20
Frequency [MHz]
Frequency [MHz]
USA/Canada: (315) 432ꢀ8909
Toll Free: (800) 411ꢀ6596
Europe: +44 2392ꢀ232392
Asia: +86 512ꢀ62749282
Visit us at
www.Anaren.com
Model B0430J50100AHF
Rev A
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from organic PTFE based composites which possess excellent
electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and
ready for Pbꢁfree soldering processes. Pads are Gold plated with a Nickel barrier.
This component requires a 10 pF capacitor to be mounted in front of the unbalanced port (Pin 2) of the balun as
shown in the drawing below for optimum performance. The capacitor should be placed as close as possible to the
balun to minimize transmission line effects as shown in the suggested PCB footprint below.
An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the
transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
Dimensions are in Millimeters
Circuit Pattern
Mounting Footprint
Footprint Pad (s)
Solder Resist
0402
Capacitor
6x .41
.04
6x .33
.66
3x Transmission
lines
3x
4x .25
Plated thru
holes to ground
USA/Canada: (315) 432ꢁ8909
Visit us at
www.Anaren.com
Toll Free: (800) 411ꢁ6596
Europe: +44 2392ꢁ232392
Asia: +86 512ꢁ62749282
Model B0430J50100AHF
Rev A
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481ꢁ2. Parts are oriented in tape and reel as shown below. Minimum order
quantities are 4000 per reel. See Model Numbers below for further ordering information
.
2.00
.81
4.00
1.75
3.50
2.41
.25
8.00
4.00
1.60
USA/Canada: (315) 432ꢁ8909
Toll Free: (800) 411ꢁ6596
Europe: +44 2392ꢁ232392
Asia: +86 512ꢁ62749282
Visit us at
www.Anaren.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Anaren:
B0430J50100AHF
相关型号:
©2020 ICPDF网 联系我们和版权申明