150-50RL-S [ANAREN]
Flanged Resistors 150 Watts; 法兰式电阻器150瓦
| 型号： | 150-50RL-S |
| 厂家： | 
ANAREN MICROWAVE |
| 描述： | Flanged Resistors 150 Watts |
| 文件： | 总2页 (文件大小：224K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Model RFP-150-XXXRL-S
RoHS
Compliant
Flanged Resistors
150 Watts
General Specifications
Resistive Element
Substrate
Thick film
Beryllium oxide ceramic
Alumina ceramic
Cover
Mounting flange
Leads
Copper, nickel plated per QQ-N-290
99% pure silver (.005” thick)
Electrical Specifications
Resistance Range
Frequency Range
Power
See chart
See chart
150 Watts
See chart
Features:
• DC – 2.0 GHz
• 150 Watts
• BeO Ceramic
Capacitance
Tolerance is 0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. Operating temperature is -55ºC to 155ºC (see
chart for derating temperatures).
• Non-Nichrome Resistive
Element
All dimensions in inches.
Specifications subject to change with out notice.
• Welded Silver Leads
• 100% Tested
• RoHS Compliant
Outline Drawing
150-XXXRL-S (097) Rev B
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape
and Reel For Pick and
Place Manufacturing.
Europe:
Model RFP-150-XXXRL-S
Specifications:
Part number
150-50RL-S
150-100RL-S
150-150RL-S
150-200RL-S
Frequency (GHz)
Resistance (Ω)
50
Capacitance (pF)
1.5
2.0
2.0
2.0
2.9
2.9
3.2
3.2
100
150
200
Power De-rating:
Mounting Footprint and Procedure:
SUGGESTED MOUNTING PROCEDURES:
MAKE SURE THAT THE DEVICES ARE MOUNTED ON
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
1.
.025 MIN.
(2 PLACES)
2. DRILL & TAP THE HEATSINK FOR THE APPROPRIATE
THREAD SIZE TO BE USED.
3. COAT HEATSINK WITH A MINIMUM AMOUNT OF HIGH
QUALITY SILICONE GREASE (.001" MAX. THICKNESS).
4. POSITION DEVICE ON MOUNTING SURFACE & SECURE
USING SOCKET HEAD SCREWS, FLAT & SPLIT WASHER.
TORQUE SCREWS TO THE APPROPRIATE VALUE. MAKE
SURE THAT THE DEVICE IS FLAT AGAINST THE HEATSINK.
BOARD LOWER
THAN LEAD.
BOARD EVEN
WITH LEAD.
BOARD LOWER
THAN LEAD.
BOARD HIGHER
THAN LEAD.
SUGGESTED STRESS RELIEF METHODS
SCALE: NONE
NOT RECOMMENDED APPLICATION
(CARE SHOULD BE TAKEN TO AVOID UPWARD PRESSURE OF
THE LEADS TOWARDS THE LID).
SCALE: NONE
5.
SOLDER LEADS IN PLACE USING APPROPROATE SOLDER WITH
A CONTROLLED TEMPERATURE IRON.
** FOR MORE DETAILS CONTACT FACTORY **
150-XXXRL-S (097) Rev B
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
相关型号：
©2020 ICPDF网 联系我们和版权申明