T5100-E-GN-5v [AMPHENOL]

Patented, Absorption Infrared Gas sensing engine provides high accuracy in a compact low cost package;


型号：	T5100-E-GN-5v
厂家：	Amphenol
描述：	Patented, Absorption Infrared Gas sensing engine provides high accuracy in a compact low cost package
文件：	总4页 (文件大小：129K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Telaire

T5100 Series

Low-Cost Wall Mount

CO₂Transmitter

The new Telaire T5100 series is a new low cost, high performing CO₂transmitter for the building

controls market. It works seamlessly with building automation systems, and allows you to simply

and effectively control fresh air. Demand-controlled ventilation using CO₂sensors prevents energy

losses from over-ventilation while maintaining indoor air quality.

Features:

•ꢀ Patented, Absorption Infrared Gas sensing

engine provides high accuracy in a compact

low cost package.

•ꢀ Sensors are shipped factory calibrated.

•ꢀ Modern enclosure

•ꢀ Patented ABC Logic™ self-calibration

system eliminates the need for manual

calibration in most applications.

•ꢀ Low-cost

•ꢀ Reliable (20 years of low-cost infrared sensor

manufacturing)

•ꢀ Lifetime CO₂calibration guarantee when

using ABC Logic™.

•ꢀ Available output options:

- Voltage 0-10V or 0-5V (jumper selectable)

- Current 4-20 mA

•ꢀ Mounting plate with two-piece terminal

blocks provide quick, easy wiring.

•ꢀ UIP software compatible for customizations

•ꢀ CE, RoHS, REACH and WEEE compliant

•ꢀ Lifetime calibration warranty

•ꢀ Gas permeable, water resistant CO₂

diffusionꢀﬁlterꢀpreventsꢀparticulateꢀandꢀwaterꢀ

contamination of the sensor.

•ꢀ Locking screw secures cover and sensor to

the mounting bracket for tamper resistance.

•ꢀ Two enclosure sizes for regional acceptance

Amphenol

Advanced Sensors

Controlled Ventilation

Ventilation is an important part of maintaining a

Numerous organizations now require and/or recommend

CO₂-based ventilation control in different commercial

HVAC applications. Some utility companies also offer

rebates to building owners for installing CO₂sensors.

comfortable, healthy, productive environment for people.

Improper ventilation can have a negative impact on

occupant health and performance, increase the risk

from litigation, and/or waste energy. Demand-controlled

ventilation using CO₂sensors prevents energy losses

from over-ventilation while maintaining indoor air quality.

The most energy savings potential is in buildings where

occupancyꢀﬂuctuatesꢀduringꢀaꢀ24-hourꢀperiod.ꢀ

Wallꢀmountꢀsensorsꢀareꢀusedꢀtoꢀcontrolꢀaꢀspeciﬁcꢀareaꢀ

such as a conference room, classroom, meeting hall,

etc. The Telaire 5100 Ventostat series are easy to install

and have a clean, modern look that suits most indoor

environments.

T5100ꢀSeriesꢀWallꢀMountꢀSpeciﬁcations

Sensing Method

•ꢀ Non-dispersive infrared (NDIR) absorption

•ꢀ Gold-plated optics

Warranty

24 months on mechanical defects

Calibration - lifetime warranty (ABC Logic on.)

•ꢀ Patented ABC Logic self calibration algorithm

Certifications

CE EMC, RoHS, REACH and WEEE compliant

CO₂Measurement Range

0 to 2000 ppm

Signal Update

Every 5 seconds

(0 ppm = 0 V, 4 mA)

CO₂Accuracy

±30 ppm or 3% of the reading shown,whichever is higher*

CO₂Warm-up Time

•ꢀ < 2 minutes (operational)

•ꢀ 10 minutes (maximum accuracy)

Power Supply Requirements

18-30 VAC RMS, 50/60 Hz, or 18 to 42 VDC,

polarity protected

Operating Conditions

•ꢀ 32°F to 122°F (0°C to 50°C)

•ꢀ 0 to 95% RH, non-condensing

*AHRAE — regulation 62 states maximum indoor CO2

level of 1000 ppm

Storage Conditions

-40°F to 158°F (-40°C to 70°C)

Power Consumption

Typical 0.7 W at nominal voltage of 24V AC RMS

Flammability Classification

UL94 5VA

Temperature Dependence

0.2% FS per °C (±0.11% per °F)

Output

Stability

<2% of FS over life of sensor (15 years)

Analog (CO₂)

•ꢀ 0 to 5 V, or 0 to 10 V jumper selectable (100 Ω output

impedance)

•ꢀ Or 4 to 20 mA (RL maximum 500 Ω)

•ꢀ Voltage and current outputs are not available

simultaneously

Pressure Dependence

0.135% of reading per mm Hg

*C0₂accuracy statement excludes standard gas used for

calibration that has an accuracy of 2%. In addition, there is

a potential digital to analog error of up to 2%.

•ꢀ Digital to analog error ±1%

Accessories

Enclosure Specifications

Sensor Accuracy & Field Calibration

CO₂ABC Logic Self Calibration

T1508 Aspiration Box for Duct Mounting

The Model 1508 is designed for in-duct sampling of CO₂

concentrationsꢀatꢀﬂowꢀratesꢀgreaterꢀthanꢀ400ꢀfpm.ꢀClearꢀ

cover allows for observation of the sensor. They will

accommodate any of the T5100 series, and can be used

forꢀtemperatureꢀandꢀRHꢀwhenꢀﬁtted.ꢀEnclosureꢀisꢀscrewedꢀ

to the duct with probe inserted into air stream. Air

sampling probe is 1-inch (25.4mm) diameter and 8-inch

(203.2mm) long. Enclosure (ABS plastic) has knockouts

for conduit connection. Note: Wiring penetrations must be

sealed prior to use. CO₂sensor not included.

T5100-LED sensors employ the patented ABC (Automatic

Background Calibration) Logic self-calibration system.

ABC Logic virtually eliminates the need for manual

calibration in applications where the indoor CO₂level

drops to outside levels during unoccupied periods (e.g.

during evening hours). ABC Logic is a special software

routine in the sensor that remembers the background

readings for 14 consecutive evenings, calculates if there

is a sensor drift, and then corrects for it.

With ABC Logic enabled, the sensor will typically reach

its operational accuracy after 25 hours of continuous

operation at a condition that is exposed to ambient

reference levels. Sensors will maintain accuracy

speciﬁcationsꢀwithꢀABCꢀLogicꢀenabled,ꢀgivenꢀthatꢀitꢀisꢀ

at least three times in 14 days exposed to the reference

value and this reference value is the lowest concentration

to which the sensor is exposed.

Note: Applies when used in typical indoor ambient air. Consult

Telaire if other gases or corrosive agents are part of the

application environment.

CO₂Calibration Guarantee

Telaire is serious about minimizing maintenance, so each

T5100 sensor comes with a lifetime calibration guarantee.

3.20

81.40

1.01

25.69

T1508 Aspiration Box for Duct Mounting

T1505 Splash Resistant Enclosure

The Model 1505 is designed to protect the T5100

series in damp or wet environments as might occur in

agricultural, industrial or food processing environments.

This enclosure (ABS plastic) is designed to protect the

sensor from dripping or sprayed water. Any wall mount

model of the T5100 series sensor can be installed

inside the enclosure. The transparent cover allows for

viewing of the sensor/display. Four diffusion ports allow

for entry of CO₂. Knockouts are provided for conduit

connection. Response time of the sensor is slowed to

approximately 30 minutes to measure a 90% step change

in concentrations. Enclosure is designed to screw directly

to a wall. CO₂sensor not included.

4.58

116.40

T5100 standard enclosure

T5100-EC smaller Euro enclosure

T1552 Outside Air Enclosure

Ventostat UIP Software

The Model 1552 is a rugged weatherproof enclosure

(ABS plastic), designed to allow the T5100 series sensor

to operate in an outdoor environment and/or where

ambient temperatures are below freezing. The 1552 is

ideal for monitoring outside air or CO₂as a surrogate

for combustion fumes in parking garages, tunnels and

loading docks. This enclosure features a temperature

control circuit and internal heaters to maintain the

sensor within its normal operating temperature range,

even if temperatures outside the enclosure are as low

as -20°F (-29°C). Four diffusion ports allow for entry

of CO₂. Response time of the sensor is slowed to

approximately 30 minutes to measure a 90% step change

in concentrations. Enclosure is designed to screw directly

to a wall. CO₂sensor not included. Power consumption is

24V, 1.5 Amp (max), and includes the T5100 series.

The Ventostat UIP software allows you to modify the

standard settings on the T5100 series products.

Software features:

•ꢀ Altitude adjustment for maximum accuracy

performance

•ꢀ Analog output adjustment

•ꢀ Single point and span gas calibration

•ꢀ Turn on and off ABC Logic™

•ꢀ Graphing and logging of CO₂

The software can be used by distributors to make

modiﬁcationsꢀtoꢀtheꢀT5100ꢀpriorꢀtoꢀshippingꢀtoꢀtheꢀ

customer,ꢀasꢀwellꢀasꢀtoꢀmakeꢀadjustmentsꢀinꢀtheꢀﬁeld.ꢀTheꢀ

USB cable supplies power to the Ventostat, negating the

need for a separate power supply.

The T2090 UIP software kit is supplied with a USB cable

and software CD.

T1505 Splash Resistant Enclosure and T1552 Outside Air Enclosure

Ordering Information

Examples:

T5100 - 10 V output = 10 V

T5100-E-GN-5v Euro case size, no branding, 5v output

T5100-I output = 4-20 mA

E for Euro case

GN for no brand

5V for 0 -5V

nothing for US case

10V for 0 – 10V

I (for I = 4 - 20 mA)

T5100

—

www.telaire.com

www.amphenol-sensors.com

Other company names and product names used in this document are the registered trademarks or

trademarks of their respective owners.

Amphenol

Advanced Sensors

AAS-920-586D - 02/2016

T5100-E-GN-5v [AMPHENOL]

相关型号：

T5100050

T510005004AB

T510005004AQ

T510005007AB

T510005007AQ

T5100080

T5100150

T510015000J0G

T510015004AQ

T510015005DH

T510015006DH

T510015007DH