JC-PTC-13 [AMPHENOL]

Suitable for use in conditions of high;
JC-PTC-13
型号: JC-PTC-13
厂家: Amphenol    Amphenol
描述:

Suitable for use in conditions of high

文件: 总4页 (文件大小:80K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
NTC Type  
JW, JC  
Thermometrics  
Clip-On Pipe and  
Surface Sensors  
Features  
•ꢀ Suitable for use in conditions of high  
condensation and occasional immersion in  
water  
•ꢀ Self-adjusts to irregular pipe surfaces  
•ꢀ Fast time response (1.5s typical) for JC and  
3.0s for JW  
•ꢀ 0 - 100°C operating range  
•ꢀ Water resistant version (Type JW) meets  
IP46 standard (with connector tabs  
encapsulated)  
•ꢀ Low temperature gradient (<1.8°F at 140°F  
(<1°C at 60°C))  
•ꢀ Sensing element electrically isolated from shoe  
•ꢀ Offers cost benefits over traditional  
(isolation >20M Ω at 500V)  
immersion probes  
•ꢀ Type JC meets IP44 standard  
•ꢀ Typical applications include gas boiler  
control, domestic water systems, air  
conditioners, radiator inlet-outlet, electric  
showers, vending machines, chiller and  
refrigeration units  
•ꢀ Range of clips for pipe diameters 0.51 in to  
1.18 in (13 mm to 30 mm). (Consult factory for  
additional size options.)  
Amphenol  
Advanced Sensors  
Clip  
Type JW Specifications  
Shoe  
Description  
NTC or PTC chip thermistor on a ceramic/metal shoe  
assembly sealed in a polymer housing and provided  
with flexible twin cable connections. The housing is  
fitted with a spring metal clip for pipe attachment.  
Options  
•ꢀOtherꢀresistanceꢀ-ꢀtemperatureꢀcharacteristics  
•ꢀOtherꢀwireꢀlengths  
•ꢀSpecialꢀpipeꢀsizes  
NTC Type JW dimensions  
General Data  
•ꢀMinimumꢀoperatingꢀtemperature:ꢀ32°Fꢀ(0°C)  
•ꢀMaximumꢀtemperature:ꢀ212°Fꢀ(100°C)ꢀ(sensor)ꢀ185°Fꢀ  
(85°C) (housing)  
•ꢀDissipationꢀfactor:ꢀ≥2mW/Kꢀ(mountedꢀonꢀcopperꢀpipeꢀ  
at 77°F (25°C))  
•ꢀIsolationꢀvoltage:ꢀ500ꢀVDC  
•ꢀClipꢀforce:ꢀ<50Nꢀforꢀmountingꢀ/ꢀde-mountingꢀonꢀpipe  
5N will not cause rotation on pipe  
•ꢀShoeꢀmaterial:ꢀPlatedꢀbrass  
Ordering Information  
The code number to be ordered may be specified as  
follows:  
•ꢀBodyꢀmaterial:ꢀNylon  
•ꢀPackꢀquantityꢀ&ꢀMOQ:ꢀ200ꢀpcs  
Code Type  
Response Time (seconds)  
JW  
Resin-Coated Thermistor With PVC Wires  
Code Pipe Diameter Range in mm  
NTC  
PTC  
≤4 (to 90% voltage change)  
13  
17  
20  
28  
13 - 15  
17 - 18.5  
20 - 22  
28-30  
≤4 to TNF 41°F (5°C) (sensor applied to pipe at  
TNF 73.4°F (23°C)  
JW -  
____  
Typical model number  
NTC Data  
Clip size is specified in the code above as shown in the  
table below, e.g., JW103C3R5/17  
For codes, see below.  
Nominal Resistance  
Code  
Tolerances  
77°F  
140°F  
185°F  
(85°C)  
Ω
77°F  
(25°C)  
%
140°F  
(60°C)  
%
185°F  
(85°C)  
%
Bꢀ25/85  
K
(25°C) (60°C)  
Ω
Ω
°C  
°C  
°C  
JW103C3R5/X 9983  
2500  
1079  
6.46  
1.48 5.00  
1.40 5.90  
1.87 3960 1%  
PTC Data  
•ꢀMaximumꢀappliedꢀvoltage:ꢀ30V  
•ꢀMaximumꢀappliedꢀvoltageꢀforꢀtemperatureꢀsensing:ꢀ2.5V  
For codes see below.  
TNF  
(-20 to TNF  
-20°C)  
25°C  
TNF- 5°C  
TNF+ 5°C  
TNF+ 23°C  
Ω
VDC  
Ω
VDC  
Ω
VDC  
Ω
VDC  
Ω
VDC  
JW 060/X 60°C  
JW 070/X 70°C  
JW 080/X 80°C  
<=250 2.5  
<=250 2.5  
<=250 2.5  
<=100 0.2  
<=100 0.2  
<=100 0.2  
<=570 2.5  
<=570 2.5  
<=570 2.5  
>=570 2.5  
>=570 2.5  
>=570 2.5  
>=10000 2.5  
>=10000 2.5  
>=10000 2.5  
Type JC Specifications  
General Data  
•ꢀ Minimumꢀoperatingꢀtemperature:ꢀ32°Fꢀ(0°C)  
•ꢀ Maximumꢀtemperature:ꢀ212°Fꢀ(100°C)ꢀ(sensor)ꢀ185°Fꢀ  
(85°C) (housing)  
Description  
A range of temperature sensing elements on a  
ceramic/metal shoe assembly, held in a polymer  
housing and provided with connector tabs. The housing  
is fitted with a spring metal clip for pipe attachment.  
The elements available are NTC, PTC, SLN (silicon linear  
PTC) and PRT (Pt).  
•ꢀ Dissipationꢀfactor:ꢀ=2mW/Kꢀ(mountedꢀonꢀcopperꢀpipeꢀ  
at 77°F (25°C))  
•ꢀ Isolationꢀvoltage:ꢀ500ꢀVDC  
•ꢀ Clipꢀforce:ꢀ<50Nꢀforꢀmounting/de-mountingꢀonꢀpipe  
5N will not cause rotation on pipe  
•ꢀ Shoeꢀmaterial:ꢀPlatedꢀbrass  
Options  
•ꢀ Bodyꢀmaterial:ꢀNylon  
•ꢀ Packꢀquantityꢀ&ꢀMOQ:ꢀ200ꢀpcs  
•ꢀ Other resistance – temperature characteristics  
•ꢀ Special pipe sizes  
•ꢀ Waterproof version – JW (see page 2)  
NTC Data  
For codes, see below.  
Code  
Nominal Resistance  
Tolerances  
B 25/85  
K
Identification  
color dot  
77°F  
140°F  
60°C  
185°F  
77°F  
25°C  
140°F  
60°C  
185°F  
85°C  
25°C  
85°C  
Ω
Ω
Ω
±±  
±°C  
±±  
±°C ±±  
±°C  
JC502C3R5/X  
JC103C3R5/X  
JC103C4R5/X  
4990  
9983  
9925  
1250  
2500  
3000  
540  
6.46  
6.46  
6.26  
1.48  
1.48  
1.67  
5.00  
5.00  
5.00  
1.40 5.90  
1.40 5.90  
1.60 5.77  
1.87  
1.87  
2.09  
3960 1%  
3960 1%  
Orange  
None  
1079  
1441  
3435 1% Yellow  
PTC Data  
•ꢀMaximumꢀappliedꢀvoltage:ꢀ30V  
•ꢀMaximumꢀappliedꢀvoltageꢀforꢀtemperatureꢀsensing:ꢀ2.5V  
For codes, see below.  
TNF  
-20°C to TNF –20°C  
77°F (25°C)  
VDC  
TNF -5°C  
TNF + 5°C  
Ω
TNF + 23°C  
Ω VDC  
Identification dots  
Ω
VDC  
2.5  
Ω
Ω
VDC  
2.5  
VDC  
JC060/X 60°C  
JC070/X 70°C  
JC080/X 80°C  
<=250  
<=250  
<=250  
<=100  
<=100  
<=100  
0.2  
0.2  
0.2  
<=570  
<=570  
<=570  
>=570 2.5  
>=570 2.5  
>=570 2.5  
>=10000 2.5  
>=10000 2.5  
>=10000 2.5  
White/Gray  
White/Brownꢀ  
White/White  
2.5  
2.5  
2.5  
2.5  
Type JC Specifications  
0.394 in (10 mm)  
Housing length  
(along pipe) = 0.63 in (16 mm)  
0.197 in  
(5 mm)  
Silistor Data  
Housing  
Tab 0.11 in (2.8 mm) X (0.02 in) 0.5 mm  
Code: JC202SLN1/X  
Measurements made at 1 mA  
77°F (25°C)  
140°F (60°C)  
185°F (85°C)  
0.7 in (17.8 mm)  
Resistance Ω 1980 – 2020  
2577.1 – 2641.3  
3024.2 – 3146.5  
Temperature  
2.29°F ( 1.27°C)  
4.10°F ( 2.28°C)  
5.4°F ( 3.0°C)  
Deviation  
PRT Data  
•ꢀTolerance:ꢀClassꢀA  
•ꢀCode:ꢀJC102PRTA/X  
Clip  
Refer to separate tables for RvT  
32°F (0°C) 77°F (25°C) 140°F (60°C)  
185°F (85°C)  
Shoe  
Resistance Ω 1000  
1097  
0.36°F  
( 0.2°C)  
1232  
0.49°F  
( 0.27°C)  
1328  
Temperature  
0.27°F  
( 0.15°C)  
0.58°F  
( 0.32°C)  
Deviationꢀ  
Ordering Information  
Theꢀcodeꢀnumberꢀtoꢀbeꢀorderedꢀmayꢀbeꢀspecifiedꢀasꢀfollows:  
Code Type  
JC  
Clip-On Pipe Sensor  
Code Type  
Xꢀꢀ  
NTCꢀ(SeeꢀNTCꢀDataꢀTableꢀonꢀpageꢀ3)  
PTCꢀ(SeeꢀPTCꢀDataꢀTableꢀonꢀpageꢀ3)  
SLNꢀ(SeeꢀSilistorꢀDataꢀTable)  
PRTꢀ(SeeꢀPRTꢀDataꢀTable)  
Code Pipe Diameter Range in mm  
13  
17  
20  
26  
28  
F
13 - 15  
17 - 18.5  
20 - 22  
26 - 27.5  
28 - 30  
Flat Surface  
JC -  
____ - ____  
Typical model number  
Clip Size is specified in the codes above as shown in the table  
on the top.  
www.amphenol-sensors.com  
© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.  
Otherꢀcompanyꢀnamesꢀandꢀproductꢀnamesꢀusedꢀinꢀthisꢀdocumentꢀareꢀtheꢀregisteredꢀtrademarksꢀorꢀ  
trademarksꢀofꢀtheirꢀrespectiveꢀowners.  
Amphenol  
Advanced Sensors  
AAS-920-349D-03/2014  

相关型号:

JC-PTC-17

Suitable for use in conditions of high
AMPHENOL

JC-PTC-20

Suitable for use in conditions of high
AMPHENOL

JC-PTC-26

Suitable for use in conditions of high
AMPHENOL

JC-PTC-28

Suitable for use in conditions of high
AMPHENOL

JC-SLN-13

Suitable for use in conditions of high
AMPHENOL

JC-SLN-17

Suitable for use in conditions of high
AMPHENOL

JC-SLN-20

Suitable for use in conditions of high
AMPHENOL

JC-SLN-26

Suitable for use in conditions of high
AMPHENOL

JC-SLN-28

Suitable for use in conditions of high
AMPHENOL

JC0-0019

Through Hole (THT) Integrated Connector Module
PULSE

JC0-0019NL

Through Hole (THT) Integrated Connector Module
PULSE

JC0-0131NL

PulseJack 2xN GIGABIT
PULSE