FCC17C37SN-5B0 [AMPHENOL]
D Type Connector, 37 Contact(s), Female, 0.108 inch Pitch, Solder Terminal, Hole .115-.125, Plug;
| 型号： | FCC17C37SN-5B0 |
| 厂家： | 
Amphenol |
| 描述： | D Type Connector, 37 Contact(s), Female, 0.108 inch Pitch, Solder Terminal, Hole .115-.125, Plug PC |
| 文件： | 总28页 (文件大小：1049K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
Amphenol
The Company
Amphenol Canada Corp. a subsidiary of Amphenol Corporation, connector products which are used in Commercial, Industrial,
Communications, Military and Aerospace applications world-
wide. Our expertise in understanding and supporting our cus-
tomers’ filter interconnect needs has earned Amphenol Canada a
reputation of quality and excellence among the world’s leading
users of electronic components.
is an international leader in the manufacture of Filtered
Connectors and Specialty Interconnect Devices, and has been
pioneering EMI and EMP technologies for more than 40 years.
Located in Toronto, Canada, our ISO 9001 certified facility
employs approximately 400 people. Our activities are dedicated
to the design, development and manufacture of EMI/EMP filter
What is a Filtered Connector?
A filtered connector is the combination of filter elements in a capacitors are mounted inside the connector between each of
connector, forming one neat, compact interconnect device that
can filter unwanted EMI. The most popular configuration is when
the contacts and the connector ground shell.
Benefits
Better EMI Control – With minimized lead inductances and
short, direct paths to ground of the filter, performance
will typically out perform the same filter components on
a P.C.B. by a factor of three to one.
Easy EMI/RFI Upgrade – These compact filtered connectors
fit standard non-filtered connector footprints. For
improved EMC performance, simply replace the existing
connector with a filtered connector.
PCB Space Savings – Incorporating filter elements into the
connector, enables simplification of the required filter
schematic for the necessary performance plus a savings
of 2-4 square inches.
Cost Savings – Filter elements, such as inductors and capaci-
tors, must no longer be purchased, stocked, assembled
or tested. Fewer components means greater reliability at
lower cost.
EMC Compliance & Immunity – EMI that is generated
from the electronic device, radiated or conducted, will
be re-directed to chassis ground through the connector
shell. This same device will also protect the system from
external EMI/RFI noise (such as radio transmitters, ESD,
or natural phenomena such as lightning) in the same way.
Choosing the Right Capacitance for Your Filter Connector
(1) Determine the highest frequency that the filter connector
needs to pass unaffected.
(2) Which frequencies are causing trouble, either with
emissions or with immunity to interference?
(3) Scan the Insertion Loss charts on page 2 to select a filter
which provides little or no insertion loss (filtering) at the
frequency determined from step 1, yet gives the greatest
possible insertion loss at the frequencies determined in step 2.
Nominal Insertion Loss values described in this catalog are
hence, the filter connector may perform differently.
based on the Mil-STD-220 test method - a 50 ohm balanced load The final decision will be determined from actual EMI/RFI
and source impedance. Different systems will differ from this and testing of the equipment in question.
Contents
D–Sub Series
Electrical Data, Insertion Loss Performance
2
3
FCC17 Series
Mechanical and Environmental Data
Filtered Stacked D-Sub Connectors
Filtered D-Sub Connectors: How To Order
Filtered Combo D-Sub Connectors
4
5-10
11-16
Micro–Ribbon Series
Electrical Data, Insertion Loss Performance
Mechanical and Environmental Data
2
3
FCC57 Series
Filtered Micro-Ribbon Connectors: How To Order 17-22
RF Series
Capacitively Decoupled RF Connectors
23-35
456 Series
Modular Jacks
Filtered & Shielded -
FRJ /FRJA Series
See Modular Jack Catalogue
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
1
FCC17 & FCC57 Series
ELECTRI CAL DATA
Contact Resistance: 15 milliohms maximum per MIL-STD-1344 Method 3002
Insulation Resistance: 3000 megohms minimum per MIL-STD-1344 Method 3003.1
Current Rating:
5 Amps DC maximum
2 Amps RF filtering maximum
FCC17 Combo:
20-40 Amps
Filter Performance:
Filter Capacitance (pF)
@25°C, 1 kHz, 1.0 VRMS
50
180
330
470
820
± 15%
1000
± 15%
1200
± 15%
2200
± 15%
5600
± 20% ± 20%
47000
± 15% ± 15%
± 15% ± 15%
Dielectric Material: NPO or X7R
Insertion Loss (dB)
(per MIL-STD-220 @
25°C)
.5 MHz
1 MHz
5 MHz
3
5
15
20
27
32
32
32
32
32
50
150
1
5
8
23
32
32
32
200
600
1
2
11
22
30
32
300
600
1
3
1
3
1
4
11
16
32
32
32
32
200
600
10 MHz
50 MHz
100 MHz
200 MHz
1000 MHz
1
7
4
12
27
32
300
600
16
30
32
32
200
600
16
30
32
32
200
600
17
30
32
32
200
600
2
12
32
300
600
15
28
32
300
600
Working Voltage (VDC)
DWV (VDC) *
NOTE: A larger range of capacitors available - consult factory.
* FCC57 connectors can be specified to meet the requirements of FCC Docket 20780, Part 68, Subpart F (1000 VAC for one minute. Consult factory for details).
FCC17 and FCC57 connectors can withstand a transient voltage spike of 700 V with a rise time of 1 µsec (500 V for 47000 pF).
FCC17 and FCC57 connectors can be specified to meet higher DWV and transient voltage requirement (consult factory).
Typical Insertion Loss Performance (dB)(Per MIL-STD-220, no load)
40
30
20
10
0
40
30
20
10
0
0.1
1.0
10
100
1000
0.1
1.0
10
100
1000
Frequency (MHz)
50 pF - 470 pF
Frequency (MHz)
820 pF - 1000 pF
40
30
20
10
0
40
30
20
10
0
0.1
1.0
10
100
1000
0.1
1.0
10
100
1000
Frequency (MHz)
Frequency (MHz)
1,200 pF - 2,200 pF
5,600 pF - 47,000 pF
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2
FCC17 & FCC57 Series
MECHANI CAL DATA
FCC17 Series Construction
Stamped steel
shell plated
per MIL-T-10727
Low impedance
chip capacitor
Gold plated
phosphor
bronze contact
with integral
High strength
thermoplastic
insert
contact spring
Mounting hole
(threaded or
through hole)
Board lock
device
FCC17 & FCC57 Mechanical & Environmental Data
M AT E R I A LS
FCC17
E N VI R O N M E N TA L
FCC57
Shell
FCC17 & FCC57
Shell
Stamped Steel;
Tin Plated
Stamped Steel,
Zinc or Aluminum
Diecast; Tin Plated
OPERATING TEMPERATURE • -40°C to +85°C
TEMPERATURE CYCLING
• To MIL-STD-1344,
Method 1003, Test Cond. A
Contacts Phosphor Bronze;
15µ inches
Contacts Phosphor Bronze;
30µ inches
HUMIDITY
• To MIL-STD-1344,
Method 1002, Type I,
Test Condition C
[0.38 microns]
Au over Ni
[0.76 microns]
Au over Ni
Optional 50µ inches
[1.27 microns]
Au available
Optional 50µ inches
[1.27 microns]
Au available
VIBRATION
• To MIL-STD-1344,
Method 2005, Test Cond. III
DURABILITY
• 200 Cycles Minimum,
to MIL-STD-1344,
Method 2016
FCC17 Combo
Copper Alloy
30µ inches
[0.76 microns]
Au over Ni
UL File #
CSA File #
E135615
LR68598
Inserts High Strength
Thermoplastic.
Inserts High Strength
Thermoplastic.
Complies with UL
flammability
Complies with UL
flammability
requirements of
requirements of
94V-O per UL-STD-94.
94V-O per UL-STD-94.
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
3
FCC17 Series
FI LTERED STACKED D- SUB CONNECTORS
Ordering Information – Stacked D-Sub
– 2 BP BS –
4
5
5
X
FCC17
FCC17
2
SERIES DESIGNATION
VERTICAL MOUNTING DIMENSION
BETWEEN CONNECTORS
1 = .625" [15.88 mm]
2 = .750" [19.05 mm]
BP UPPER CONNECTOR CONFIGURATION
(Size and Style)
EP: 9 pin
ES: 9 socket BS: 25 socket
AP: 15 pin CP: 37 pin
BP: 25 pin
MODIFIER
0: Standard Product
x: Special or Custom Versions
X
5
AS: 15 socket CS: 37 socket
BS LOWER CONNECTOR CONFIGURATION
(Size and Style) same as Upper Connector
Configuration
LOWER CONNECTOR FILTER CAPACITANCE
same as Upper Connector Filter
Capacitance Designation
4
MOUNTING
2: .120" [3.05 mm] Diameter Through Hole
on Flanges
4: 4-40 Threaded Inserts on Flanges
E: 4-40 Hex Jack Sockets (supplied loose)
UPPER CONNECTOR FILTER CAPACITANCE
5
D: 50 pF
5:
E:
7:
9:
8:
1,000 pF
2,200 pF
1,200 pf
5,600 pF
47,000 pF
0:
F:
1:
4:
180 pF
330 pF
470 pF
820 pF
* For Additional Mounting Options and
Filter Capacitance - Consult Factory
4–40 THREADS
OR .120” DIAMETER
THROUGH HOLE
Dimensions
Connector size
9 / 9
A
B
C
1.213 [30.81]
1.541 [39.14]
2.088 [53.04]
2.729 [69.32]
.984 [24.99]
1.312 [33.32]
1.852 [47.04]
2.500 [63.50]
.432 [10.97]
.756 [19.20]
1.304 [33.12]
1.956 [49.68]
15 / 15
25 / 25
37 / 37
Consult factory for alternative arrangements
PCB LAYOUT
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
4
FCC17 Series
FI LTERED D- SUB CONNECTORS
Specifications
Filter Characteristics: See Page 2
Electrical Data:
See Page 2
Material and Finishes: See Page 3
Environmental Data: See Page 3
UL File # :
CSA File # :
E135615
LR68598
These products are protected by U.S. Patent # 4500159
Ordering Information – D-Sub
– B25 S C –
4
4
0
G
FCC17
FCC17
SERIES DESIGNATION
B25 SIZE
E09
A15
B25
C37
S
CONNECTOR TYPE
A - Adapter
P - Pin
SPECIALS
No Digit: Standard 15µ inches gold
G
0
S - Socket
G:
K:
L:
50 micro inches gold
30 micro inches gold
Standard Connector with added
ferrite block
C
TERMINATION TYPE
A - Right Angle PC Tail, .318" [8.08 mm] Footprint
B - Right Angle PC Tail, .405" [10.29 mm] Footprint
C - Right Angle PC Tail, .590" [14.99 mm] Footprint
D - Pin/Socket Adapter
E - Vertical Mount PC Tail
M -Solder Cup
MODIFIER
0 = Standard Product (Boardlocks
on Right Angle D-Subs)
B = Metal Mounting Brackets,
for Right Angle D-Subs
D = .315” to Boardlock for .590” footprint
E = Plastic Bracket - No Boardlock
F = No Boardlock, No plastic or metal
Bracket - Alignment Strip Only
X = Specials or Custom Versions
N - Vertical Mount PC Tail - Long Body
4
MOUNTING OPTIONS*
A: 4-40 Threaded PC Tail Standoffs
with Boardlock, Vertical Mount Only
E: 4-40 Hex Jack Sockets (supplied loose)
F: 4-40 Round Fixed Jack Sockets
2: .120 [3.05 mm] diameter Through hole
3: Self-Locking 4-40 Threaded Inserts
4: 4-40 Threaded Inserts (Standard)
5: 4-40 Threaded Stand-Offs, Vertical Mount
6: M3 Threaded inserts
FILTER CAPACITANCE [pF]*
D: 50
4
pF
B: 100 pF
0: 180 pF
F: 330 pF
1: 470 pF
4: 820 pF
5: 1,000 pF
7: 1,200 pF
E: 2,200 pF
9: 5,600 pF
8: 47,000 pF
* For Additional Mounting Options and
Filter Capacitance - Consult Factory
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
5
FCC17 Series
FI LTERED D- SUB CONNECTORS
Pin
Socket
FRONT VIEW
END VIEW
FRONT VIEW
END VIEW
All Dimensions in Inches (mm)
Shell
Size
Standard
Number of
Contacts
A
B
C
D
(for pin
connector)
(for socket
connector)
E
A
B
C
9
1.213 [30.81]
1.541 [39.14]
2.088 [53.04]
2.729 [69.32]
.984 [24.99]
1.312 [33.32]
1.852 [47.04]
2.500 [63.50]
.666 [16.92]
.994 [25.25]
1.534 [38.96]
2.182 [55.42]
.643 [16.33]
.971 [24.66]
1.511 [38.38]
2.159 [54.84]
15
25
37
Mounting Dimensions
FRONT MOUNTING CUT-OUT
REAR MOUNTING CUT-OUT
Size
9
Mounting
Front
Rear
Front
Rear
Front
Rear
Front
Rear
A
B
C
.875 [22.23]
.807 [20.50]
1.200 [30.48]
1.134 [28.80]
1.744 [44.30]
1.673 [42.49]
2.389 [60.68]
2.326 [59.08]
.984 [24.99]
.984 [24.99]
1.312 [33.32]
1.312 [33.32]
1.852 [47.04]
1.852 [47.04]
2.500 [63.50]
2.500 [63.50]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
15
25
37
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
6
FCC17 Series
FI LTERED D- SUB CONNECTORS
Vertical Mount
Termination Type E
Termination Type N
Right Angle, with Boardlocks & Plastic Mounting Brackets
. 3 1 8 " F O O T P R I N T
. 4 0 5 " F O O T P R I N T
. 5 9 0 " F O O T P R I N T
Termination Type A
Termination Type B
Termination Type C
with Modifier option O
with Modifier option O
with Modifier option O
Right Angle, with Metal Mounting Brackets
. 3 1 8 " F O O T P R I N T
. 4 0 5 " F O O T P R I N T
. 5 9 0 " F O O T P R I N T
Termination Type A
Termination Type B
Termination Type C
with Modifier option B
with Modifier option B
with Modifier option B
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
7
FCC17 Series
FI LTERED D- SUB CONNECTORS
Solder Cup Termination
Termination type M
SIDE VIEW
END VIEW
SOLDER CUP DETAIL
(ACCEPTS UP TO 20 AWG WIRE)
Pin-to-Socket Adapter
Termination type D
Mounting Options
Through Hole with Mounting Post
4-40 Threaded Inserts
Part No. Example
FCC17-B25AD-2x 0
FCC17-B25AD-4x 0
x = To complete the P/N, see page 5 to assign Filter Capacitance Code.
For electrical and mechanical specifications, see pages 2 and 3.
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
8
FCC17 Series
FI LTERED D- SUB CONNECTORS
Mounting Options (on Flange)
Shown for Vertical Mount Connectors. Codes 2, 3, 4, 6, E and F also available on right angle connectors.
-Ax x
-2x x
-3x x , 4x x and 6x x
4-40 Threaded Inserts - Self locking
4-40 Threaded inserts (standard)
M3 threaded inserts
4-40 Threaded Standoffs with
Boardlocks (Vertical Mount only)
Mounting code A
.120" (3.05 mm) diameter thru hole
Mounting code 2
Mounting codes 3, 4 and 6
-Ex x
-5x x
-Fx x
4-40 Hex Jack Sockets (supplied loose)
Mounting code E
4-40 Threaded Standoff (vertical mount only)
Mounting code 5
4-40 Round fixed Jack Sockets
Mounting code F
Bracket Options & Specials
-x x D
.315” to Boardlock
for .590” Footprint only
Modifier option D
-x x E
Plastic bracket only
Modifier option E
-x x F
Alignment Strip Only
No bracket or boardlocks
Modifier option F
Termination
Type
“A”
Dimension
A
B
C
.318 (8.08)
.405 (10.29)
.590 (14.99)
FERRITE
Consult Factory for details
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
9
FCC17 Series
FI LTERED D- SUB CONNECTORS
PCB Layout
9 S I Z E
Standard PCB layout
PCB layout for
.590" footprint with Modifier
Options B or D only
1 5 S I Z E
Standard PCB layout
PCB layout for
.590" footprint with Modifier
Options B or D only
2 5 S I Z E
Standard PCB layout
PCB layout for
.590" footprint with Modifier
Options B or D only
3 7 S I Z E
Standard PCB layout
PCB layout for
.590" footprint with Modifier
Options B or D only
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
10
FCC17 Series
COMBO D- SUB FI LTER CONNECTORS
Specifications
Filter Characteristics: See Page 2
Electrical Data:
See Page 2
Material and Finishes: See Page 3
Environmental Data: See Page 3
UL File # :
CSA File # :
E135615
LR68598
These products are protected by U.S. Patent # 4500159
Ordering Information – Combo D-Sub
– A 3W3
P M – 4 5 0 G
FCC17
FCC17
A
SERIES DESIGNATION
SHELL SIZE
A, B, C, D, E
3W3 ARRANGEMENT
See page 12
P
CONNECTOR TYPE
A = Adapter
P = Pin
PLATING OPTION
Blank = Standard 30 microinches gold
G = 50 microinches gold
G
0
S = Socket
M
TERMINATION TYPE
D = Pin/Socket Adapter
MODIFIER 0
E = Power PC Tail –40A - .126" Dia., .175" Lg.
K = Power Solder Cup – 10A – Wire Size 16
L = Power Solder Cup – 20A – Wire Size 12
M = Power Solder Cup – 40A – Wire Size 8
0 = Standard
X = Specials or Custom versions
[Consult Factory]
R = Power Press Fit –20A - .145" Lg. - .126" Dia. Hole
FILTER CAPACITANCE (pF)
5
D: 50
pF
4
MOUNTING OPTIONS
4
B: 100 pF
O: 180 pF
F: 330 pF
2 = .120" dia. mounting holes
3 = 4-40 Threads Self locking
4 = 4-40 Threads
5 = 4-40 Standoffs - PC tail only
6 = M3 Threads
I:
470 pF
4: 820 pF
5: 1000 pF
7: 1200 pF
E: 2200 pF
9: 5600 pF
8: 47000 pF
E = 4-40 Hex Jack Sockets [supplied loose]
* For Additional Mounting Options and
Filter Capacitance - Consult Factory
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
11
FCC17 Series
COMBO D- SUB FI LTER CONNECTORS
Insert Arrangements - Male Front View
Shell Size E
Shell Size A
Shell Size B
Arrangement 2W2
No. of Signal Contacts 0
No. of Power Contacts 2
Arrangement 3W3
No. of Signal Contacts 0
No. of Power Contacts 3
Arrangement 5W5
No. of Signal Contacts 0
No. of Power Contacts 5
Consult factory
for availability
Keyed Version
also available
Consult factory
for availability
Keyed Version
also available
Consult factory
for availability
Shell Size B
Shell Size B
Arrangement 13W3
No. of Signal Contacts 10
No. of Power Contacts 3
Shell Size B
Arrangement 9W4
No. of Signal Contacts 5
No. of Power Contacts 4
Arrangement 17W2
No. of Signal Contacts 15
No. of Power Contacts 2
Consult factory
for availability
Consult factory
for availability
Consult factory
for availability
Shell Size C
Shell Size C
Arrangement 8W8
No. of Signal Contacts 0
No. of Power Contacts 8
Shell Size C
Arrangement 27W2
No. of Signal Contacts 25
No. of Power Contacts 2
Arrangement 21WA4
No. of Signal Contacts 17
No. of Power Contacts 4
Consult factory
for availability
Consult factory
for availability
Consult factory
for availability
Consult Factory for Additional Arrangements and Polarization
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
12
FCC17 Series
COMBO D- SUB FI LTER CONNECTORS
Pin
Socket
FRONT VIEW
END VIEW
FRONT VIEW
END VIEW
All Dimensions in Inches (mm)
Shell
Size
A
B
C
D
(for pin
conn. only)
(for socket
conn. only)
E
A
B
C
1.213 [30.81]
1.541 [39.14]
2.088 [53.04]
2.729 [69.32]
.984 [24.99]
1.312 [33.32]
1.852 [47.04]
2.500 [63.50]
.666 [16.92]
.994 [25.25]
1.534 [38.96]
2.182 [55.42]
.643 [16.33]
.971 [24.66]
1.511 [38.38]
2.159 [54.84]
Mounting Dimensions
STANDARD CUT-OUT
(FOR FRONT MOUNTING)
OPTIONAL CUT-OUT
(FOR REAR MOUNTING)
Size
E
Mounting
A
B
C
Front
Rear
Front
Rear
Front
Rear
Front
Rear
.875 [22.23]
.807 [20.50]
1.200 [30.48]
1.134 [28.80]
1.744 [44.30]
1.673 [42.49]
2.389 [60.68]
2.326 [59.08]
.984 [24.99]
.984 [24.99]
1.312 [33.32]
1.312 [33.32]
1.852 [47.04]
1.852 [47.04]
2.500 [63.50]
2.500 [63.50]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
A
B
C
Consult Factory - Shell Size D
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
13
FCC17 Series
COMBO D- SUB FI LTER CONNECTORS
Straight PCB
Press Fit
Termination type E
Termination type R
Solder Cup
Adapter – Pin/Socket
Termination types: K, L, M
Termination type: D
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
14
FCC17 Series
COMBO D- SUB FI LTER CONNECTORS
PCB Layout - Straight PCB & Press Fit
E
2W2
A
3W3
B
5W5
B
9W4
Consult Factory
B
13W3
B
17W2
Consult Factory
Consult Factory
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
15
FCC17 Series
COMBO D- SUB FI LTER CONNECTORS
PCB Layout - Straight PCB & Press Fit
C
8W8
C
21WA4
Consult Factory
C
27W2
Consult Factory
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
16
FCC57 Series
FI LTERED MI CRO- RI BBON CONNECTORS
Specifications
Filter Characteristics: See Page 2
Electrical Data:
See Page 2
Material and Finishes: See Page 3
Environmental Data: See Page 3
UL File # :
CSA File # :
E135615
LR68598
These products are protected by U.S. Patent # 4500159
Ordering Information
–
2 1 50 2 – 4 1 0 HV
FCC57
FCC57
2
SERIES DESIGNATION
VOLTAGE
No digits = Standard
HV - High Voltage [1000V AC per part 68]
HV
0
CONNECTOR TYPE
0 = Adapter
1 = Plug (Available in 50 size only)
2 = Receptacle
MODIFIER
0 = Standard
X = Special or Custom Versions
1
TERMINATION TYPE
0 = Solder Cup
1 = Straight PCB
2 = Right Angle PCB
5 = Straight PCB Press-Fit
9 = Adapter Plug/Receptacle
FILTER CAPACITANCE (pF)
D: 50 pF
B: 100 pF
O: 180 pF
F: 330 pF
I: 470 pF
4: 820 pF
5: 1000 pF
7: 1200 pF
E: 2200 pF
9: 5600 pF
8: 47000pF
1
50 NUMBER OF CONTACTS
36, 50, 64
2
4
HOUSING STYLE
0 = Standard
2 = Receptacle without Spring Latches
or Spring Holder
MOUNTING OPTIONS4
2 = .120" [3.05 mm] or .125" diameter hole
in flange [not standard for Adapters]
4 = 4-40 Threaded Inserts
5 = 4-40 Threaded Standoff
6 = M3 Threaded Inserts
A = 4-40 Threaded Inserts with boardlocks
E = 4-40 Jack Sockets [Supplied Loose]
High voltage capacitors available (contact factory)
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
17
FCC57 Series
FI LTERED MI CRO- RI BBON CONNECTORS
Receptacle - 36, 50, 64 Size
TOP VIEW
RECEPTACLE
Connector
Size
A
B
36
2.637 [66.98]
3.260 [82.80]
3.835 [97.41]
2.350 [59.69
2.947 [74.85]
3.542 [89.97]
50
64
Dimensions are different for DieCast Shells
Consult Factory for details
Panel Mounting Dimensions - 36 / 50 / 64 size
REAR MOUNT
[.050 MAX. PANEL THICKNESS]
Connector
Size
A
B
B
36
2.043 [71.05]
2.656 [92.36]
3.251 [113.06]
2.350 [59.69]
2.947 [74.85]
3.542 [89.97]
2.450 [85.20]
3.062 [106.48]
3.657 [127.18]
50
64
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
18
FCC57 Series 36 Size
FI LTERED MI CRO- RI BBON CONNECTORS
Receptacle
x
S T R A I G H T P C B ( F C C 5 7 - 2 1 3 6 0 - 1
0 )
PCB LAYOUT
PCB LAYOUT
PCB LAYOUT
x
S T R A I G H T P R E S S - F I T ( F C C 5 7 - 2 5 3 6 0 - 1
0 )
x
R I G H T A N G LE P C B ( F C C 5 7 - 2 2 3 6 0 - 1
0 )
Adapter
P LU G / R E C E P TA C LE ( F C C 5 7 - 0 9 3 6 0 - 1 X 0 )
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
19
FCC57 Series 50 Size
FI LTERED MI CRO- RI BBON CONNECTORS
Receptacle
S T R A I G H T P C B ( F C C 5 7 - 2 1 5 0 0 - x
x
0 )
PCB LAYOUT
S T R A I G H T P R E S S - F I T ( F C C 5 7 - 2 5 5 0 0 - x
x
0 )
PCB LAYOUT
R I G H T A N G LE P C B ( F C C 5 7 - 2 2 5 0 0 - x
x
0 )
PCB LAYOUT
S O LD E R C U P ( F C C 5 7 - 2 0 5 0 0 - x
x
0 )
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
20
FCC57 Series 50 Size
FI LTERED MI CRO- RI BBON CONNECTORS
Plug
TOP VIEW
PLUG
S T R A I G H T P C B ( F C C 5 7 - 1 1 5 0 0 - x
x
0 )
PCB LAYOUT
S O LD E R C U P ( F C C 5 7 - 1 0 5 0 0 - x
x
0 )
Adapter
P LU G / R E C E P TA C LE ( F C C 5 7 - 0 9 5 0 0 - x
x
0 )
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
21
FCC57 Series 64 Size
FI LTERED MI CRO- RI BBON CONNECTORS
Receptacle
S T R A I G H T P C B ( F C C 5 7 - 2 1 6 4 0 - x 0 )
PCB LAYOUT
S T R A I G H T P R E S S - F I T ( F C C 5 7 - 2 5 6 4 0 - x
x
0 )
PCB LAYOUT
R I G H T A N G LE P C B ( F C C 5 7 - 2 2 6 4 0 - x
x
0 )
PCB LAYOUT
A D A P T E R * ( F C C 5 7 - 0 9 6 4 0 - x
x
0 )
*Consult Factory
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
22
456 Series
CAPACI TI VELY DECOUP LED RF CONNECTORS
Specifications
Mechanical Data:
Shell:
Zinc Diecast or Brass; Nickel plated
Thermoplastic
Insulator Body:
Contact Insulator: Nylon or Teflon
Center Contact:
Phosphor Bronze or Berylium Copper;
Gold plated (456-107S is silver plated)
UL File # :
CSA File # :
E135615
LR68598
Filter Performance:
Capacitance
Working Voltage
DWV
10,000 pF
200 VDC (500AC Rear Mt)
600 VDC (1000VDC for Rear Mt)
Filter Insertion Loss (dB)
(per MIL-STD-220
@ 25°C and
1 MHz
5 MHz
10 MHz
30 MHz
50 MHz
1000 MHz
4
These products are protected by U.S.Patent # 4,772,221.
16
18
25
30
30
Amphenol’s 456 Series of RF connectors provides capacitive decoupling
between the connector body and the mounting panel. EMI on the coaxial
shield is shunted to the chassis ground through capacitors, while not
affecting the DC and power supply frequencies. This reduces ground loop
problems and provides a mechanism to harmlessly dissipate ESD to
chassis ground.
no load)
* OTHER CAPACITANCE VALUES ARE AVAILABLE. CONSULT THE FACTORY FOR
DETAILS.
The RF parameters of these connectors are the same as their non-filtered
counterparts. Filtering does not affect the signal contact, but only the
shell-to-ground connection. Capacitively decoupled RF connectors are
intermateable and inter-changeable with standard non-filtered versions.
456 Series Construction
Grounding
Device
Contact
Insulator
Capacitor
Retention Ring
Center Contact
Chip Capacitor
and / or Spark
Gap Arrestor
Insulator Body
Shell
Boardlock
Device
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
23
456 Series
CAPACI TI VELY DECOUP LED RF CONNECTORS
Rear Mount BNC, Right Angle, PCB
Type
50 Ω
75 Ω
Filtered
456-117
456-717
Filtered (10,000pF),
1000V Spark Gap
456-117S
456-717S
Filtered (10,000pF),
1000V Spark Gap,
1 M Ω Resistor
456-117F
456-117G
456-717F
456-717G
Grounded
Non-Filtered.
Panel Insulated
(no ground spring) 456-117NF
456-717NF
RECOMMENDED
PANEL CUT-OUT
PCB LAYOUT
(COMPONENT SIDE OF BOARD)
Rear Mount BNC, Crimp, Cable Size RG179
Type
50 Ω
75 Ω
Filtered
456-208
456-218
Grounded
456-208G
456-218G
Note: Also available with Spark gap and / or resistor
* Other Cable Sizes Available. Consult Factory.
RECOMMENDED
PANEL CUT-OUT
Vertical Mount BNC, Press-Fit
Board
Thickness
Type
50 Ω
75 Ω
“A”
Filtered
– –
456-107A
.125 (3.18)
.170 (4.32)
Non-Filtered
Filtered
– –
– –
– –
456-107ANF
456-107B
.125 (3.18)
.200 (5.08)
.200 (5.08)
.170 (4.32)
.255 (6.48)
.255 (6.48)
Non-Filtered
456-107BNF
– – Consult Factory for Part Number
PCB LAYOUT
(COMPONENT SIDE OF BOARD)
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
24
456 Series
CAPACI TI VELY DECOUP LED RF CONNECTORS
Front Mount BNC, Right Angle PCB
Type
50 Ω
75 Ω
Filtered
– –
456-107
– – Consult factory for part number
RECOMMENDED
PANEL CUT OUT
Front Mount BNC packaging consists of connector, insulating
washer, filter ring, lock washer and hex nut.
Front Mount BNC, Solder-Cup
Type
50 Ω
75 Ω
Filtered
456-107SG
456-107TG
456-107S has silver plated contact (50 Ω).
* Overall part length
1.180 (29.97) for 456-107S
1.245 (31.62) for 456-107SG & 456-107TG.
RECOMMENDED
PANEL CUT OUT
Front Mount BNC packaging consists of connector, insulating
washer, filter ring, ground washer and hex nut.
*
Jack-to-Jack Adapter
Type
50 Ω
75 Ω
BNC:
Filtered
Filtered
456-915
456-917
Twin BNC:
456-920
RECOMMENDED
PANEL CUT OUT
TNC Bulkhead Jack, Crimp (RG58/U Cable)
Type
50 Ω
75 Ω
Filtered
456-102
– –
– – Consult factory for part number
RECOMMENDED
PANEL CUT OUT
Packaging consists of connector, mounting hardware, panel
insulator, crimp ferrule and heat shrink tubing.
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
25
Amphenol Catalogues
DATA /TELECOM PRODUCTS
20 Melford Drive
Scarborough, Ontario
Canada M1 B 2X6
Telephone 41 6 754-5656
Facsimile 41 6 754-8668
©Amphenol Canada Corp.
Specifications subject to change without notice
Printed in Canada
CATALOGUE NR. ADT 0001/01-06
Design: Macrae Design Inc.
相关型号：
FCC17E09PA-24D
D Type Connector, 9 Contact(s), Male, 0.108 inch Pitch, Solder Terminal, Hole .115-.125, Receptacle
AMPHENOL
FCC17E09PA-27D
D Type Connector, 9 Contact(s), Male, 0.108 inch Pitch, Solder Terminal, Hole .115-.125, Receptacle
AMPHENOL
FCC17E09PA-28E
D Type Connector, 9 Contact(s), Male, 0.108 inch Pitch, Solder Terminal, Hole .115-.125, Receptacle
AMPHENOL
FCC17E09PA-29D
D Type Connector, 9 Contact(s), Male, 0.108 inch Pitch, Solder Terminal, Hole .115-.125, Receptacle
AMPHENOL
©2020 ICPDF网 联系我们和版权申明