EP-8-12B [AMPHENOL]
Audio/RCA Connector, 8 Pole(s), Solder Terminal, ROHS COMPLIANT;型号: | EP-8-12B |
厂家: | Amphenol |
描述: | Audio/RCA Connector, 8 Pole(s), Solder Terminal, ROHS COMPLIANT 连接器 |
文件: | 总6页 (文件大小:316K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EP / AP SERIES HIGH POWER CONNECTORS
EP / AP SERIES
HIGH POWER
CONNECTORS
The EP Series incorporates a rugged zinc
diecast shell to give it maximum durability
when used in demanding situations. The EP
cable connector cable flex relief design
minimises cable bend stress at point of entry
into the connector housing.
Options
Simple steps to guide you in
using this catalogue
• Solder Bucket termination
• Nickel Plated Zinc Alloy shell
• Black finished Zinc Alloy shell
• Precision machined contacts
• Thermoplastic shell
1) Identify the product group listed in
Contents on Page 1 and go directly to that
page number.
The AP Series Shell is manufactured from
tough, durable thermoplastic, and ideal for
fixed indoor installations. Both the EP and AP
Series utilise the same contact and insulator
components.
2) Each product group cover page then details
information and options available.
3) Refer to the product detail pages and identify
the product you require pictorially.
Ordering Codes
Features
4) Read the product description column for the
products standard features.
We have listed the more common ordering
codes in each section. Please contact us if
you need any further assistance.
• High current contacts for distortion free signal.
• Tough, durable zinc diecast shell for the EP
series.
5) Use variations column to determine
your choice.
• Cost effective durable thermoplastic shell for
the AP series.
6) Identify part number.
7) In the event the particular option you require
is not listed please refer to the part number
breakdown page at the end of each section.
• EP series available in 3, 4, 5, 6 and 8 contact
arrangements
• AP series available in 4, 5, 6, and 8 contact
arrangements.
8) Please contact us directly if you have any
further problems.
• Cable clamp capable of supporting cables
from 9mm (0.35") to 16mm (0.63") in
diameter.
• Quick release, vibration resistant latch lock.
• EP Cable Connectors are supplied with two
different boots for different cable diameters.
• AP & EP Series are completely intermatable.
53
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenol.com.au
EP SERIES HIGH POWER CONNECTORS
METAL TYPE - SOLDER
The EP Series has set the standard in high performance speaker
connectors. Apart from its durability and strength, it offers consistent
superior power handling capabilities.
Features:
• Solder Bucket connections.
• Precision machined contacts.
• Diecast Metal Housings
• High current contacts
• Male and female cable and chassis connectors available.
• EP Cable Connectors are supplied with two different boots for
different cable diameters.
Options: Black Finish Shell.
Specifications: Page 57-58
Panel Cutouts: Page 58
PRODUCT - FIGURE
DRAWING
Dimensions in mm (inches)
DESCRIPTION
VARIATIONS
PART NUMBER
EP Male cable
connector,
Machined contacts,
Metal Shell
3 pole nickel finish
3 pole black finish
4 pole nickel finish
4 pole black finish
5 pole nickel finish
5 pole black finish
6 pole nickel finish
6 pole black finish
8 pole nickel finish
8 pole black finish
3 pole nickel finish
3 pole black finish
4 pole nickel finish
4 pole black finish
5 pole nickel finish
5 pole black finish
6 pole nickel finish
6 pole black finish
8 pole nickel finish
8 pole black finish
EP-3-12
EP-3-12B
EP-4-12
EP-4-12B
EP-5-12
EP-5-12B
EP-6-12
ISO ASSEMBLY OF
EP MALE
EP-6-12B
EP-8-12
EP-8-12B
EP-3-11P
EP-3-11PB
EP-4-11P
EP-4-11PB
EP-5-11P
EP-5-11PB
EP-6-11P
EP-6-11PB
EP-8-11P
EP-8-11PB
EP Female cable
connector,
Machined contacts,
Metal Shell
ISO ASSEMBLY OF
EP FEMALE
54
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenol.com.au
EP SERIES HIGH POWER CONNECTORS
METAL TYPE - SOLDER
PRODUCT - FIGURE
DRAWING
Dimensions in mm (inches)
DESCRIPTION
VARIATIONS
PART NUMBER
EP-3-14
EP Male chassis
mount,
3 pole nickel finish
3 pole black finish
4 pole nickel finish
4 pole black finish
5 pole nickel finish
5 pole black finish
6 pole nickel finish
6 pole black finish
8 pole nickel finish
8 pole black finish
3 pole nickel finish
3 pole black finish
4 pole nickel finish
4 pole black finish
5 pole nickel finish
5 pole black finish
6 pole nickel finish
6 pole black finish
8 pole nickel finish
Round Flange,
Machined contacts,
Metal Shell
EP-3-14B
EP-4-14
EP-4-14B
EP-5-14
EP-5-14B
EP-6-14
EP-6-14B
EP-8-14
EP-8-14B
EP-3-13P
EP-3-13PB
EP-4-13P
EP-4-13PB
EP-5-13P
EP-5-13PB
EP-6-13P
EP-6-13PB
EP-8-13PT
EP Female chassis
mount,
Round Flange,
Machined contacts,
Metal Shell
8 pole black finish
8 pole nickel finish
EP-8-13PBT
EP-8-13P
EP Female chassis
mount,
Round Flange,
Stamped contacts,
Metal Shell
8 pole black finish
EP-8-13PB
55
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenol.com.au
AP SERIES HIGH POWER CONNECTORS
THERMOPLASTIC TYPE - SOLDER
The AP Series provides the same power handling performance as the
EP Series in a cost effective, yet durable Thermoplastic housing.
Features:
• Solder Bucket connections.
• Precision machined contacts.
• Thermoplastic Housings
• High current contacts
• Male & Female Cable and Chassis connectors available.
Specifications: Page 57-58
Panel Cutouts: Page 58
PRODUCT - FIGURE
DRAWING
Dimensions in mm (inches)
DESCRIPTION
VARIATIONS
4 pole
5 pole
6 pole
8 pole
4 pole
5 pole
6 pole
8 pole
4 pole
5 pole
6 pole
8 pole
4 pole
5 pole
6 pole
8 pole
4 pole
5 pole
6 pole
8 pole
4 pole
5 pole
6 pole
8 pole
PART NUMBER
AP-4-12
AP-5-12
AP-6-12
AP-8-12
AP-4-11
AP-5-11
AP-6-11
AP-8-11
AP-4-14
AP-5-14
AP-6-14
AP-8-14
AP-4-13
AP-5-13
AP-6-13
AP-8-13
AP-4-22
AP-5-22
AP-6-22
AP-8-22
AP-4-21
AP-5-21
AP-6-21
AP-8-21
AP Male cable
connector,
Machined contacts,
Thermoplastic Black
shell.
AP Female cable
connector,
Machined contacts,
Thermoplastic Black
shell.
AP Male chassis
mount,
Round Flange,
Machined contacts,
Thermoplastic Black
shell.
AP Female chassis
mount,
Round Flange,
Machined contacts,
Thermoplastic Black
shell.
AP Male chassis
mount,
Rectangular Flange,
Machined contacts,
Thermoplastic Black
shell.
AP Female chassis
mount,
Rectangular Flange,
Machined contacts,
Thermoplastic Black
shell.
56
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenol.com.au
EP / AP SERIES HIGH POWER CONNECTORS
STANDARD DATA
STANDARD DATA EP/AP
VALUE
GENERAL
Number of contacts
3
4
5
6
8
CHARACTERISTICS
Contact Arrangements
(Front view of pin insert)
Termination
SOLDER
12AWG
UL94V-0
Wire Gauge - Stranded wire:
Flammability
12AWG
12AWG
12AWG
14AWG
Environmental
Complies with RoHS Directive 2002/95/EC
ELECTRICAL
CHARACTERISTICS
Service Voltage RMS1)
Test Voltage AC RMS
Current carrying capacity
Typicial Contact Resistance
Insulation Resistance
Protection Class
460V
2400V
20A
660V
3000V
20A
200V
1600V
20A
200V
1600V
20A
100V
1300V
15A
≤ 3mΩ
≥ 1000MΩ
IP40
CLIMATIC
CHARACTERISTICS
Operating Temperature
Weight - EP 11 & 122)
-25˚ C to + 75˚ C (-13°F to + 167°F)
80g
(0.176lb)
48g
84g
86g
(0.189lb)
54g
86g
MECHANICAL
CHARACTERISTICS
(0.185lb)
50g
(0.189lb)
54g
Weight - EP 13 & 142)
(0.105lb)
N/A
(0.110lb)
42g
(0.119lb)
44g
(0.119lb)
44g
Weight - AP 11 & 122)
(0.092lb)
26g
(0.097lb)
30g
(0.097lb)
30g
Weight - AP 13, 14, 21 & 222)
N/A
(0.057lb)
(0.066lb)
(0.066lb)
Typical Cable retention force
Mechanical operations
22Kg to 44Kg (50lb to 100lb) - Dependant on cable material and diameter
1000 mating cycles
1)
Not suitable for domestic applications above 50V
2) Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes.
57
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenol.com.au
EP / AP SERIES HIGH POWER CONNECTORS
STANDARD DATA
STANDARD DATA EP/AP (CONT’D)
DETAILS
MATERIALS
TYPE
AP
Modified PPE Resin
Black
EP
Connector shell
Shell finish
Diecast Zinc Alloy
Satin Nickel or Black
Insulators
UL94V-0 PBT Resin
UL94 HB Thermoplastic Elastomer
Cable Bushing
Silicon Rubber
Male contact Machined - Solder
Material / Plating
Female contact Machined - Solder
Material / Plating
Cable OD Range
Brass / Bright Tin
Brass / Bright Tin
CLAMPING
CHARACTERISTICS
11mm to 17mm
(0.43” to 0.67”)
9mm to 16mm
(0.35” to 0.63”)
Metal saddle clamp
Retention Method
Two opposing plastic screws
EP/AP SERIES PANEL CUTOUT DATA - FRONT VIEW
EP 13/AP 13/AP 21
EP 14/AP 14/AP 22
58
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenol.com.au
相关型号:
EP015B101K-A-BZ
CAPACITOR, CERAMIC, MULTILAYER, 16V, B, 0.0001uF, THROUGH HOLE MOUNT, AXIAL LEADED
TAIYO YUDEN
EP015B101K-B-BZ
CAPACITOR, CERAMIC, MULTILAYER, 16V, B, 0.0001uF, THROUGH HOLE MOUNT, AXIAL LEADED
TAIYO YUDEN
EP015B101K-KE-CZ
CAPACITOR, CERAMIC, MULTILAYER, 16V, B, 0.0001uF, THROUGH HOLE MOUNT, AXIAL LEADED
TAIYO YUDEN
EP015B101K-KF-CZ
CAPACITOR, CERAMIC, MULTILAYER, 16V, B, 0.0001uF, THROUGH HOLE MOUNT, AXIAL LEADED
TAIYO YUDEN
EP015B101K-NA-CZ
CAPACITOR, CERAMIC, MULTILAYER, 16V, B, 0.0001uF, THROUGH HOLE MOUNT, AXIAL LEADED
TAIYO YUDEN
EP015B104K-A-BZ
CAPACITOR, CERAMIC, MULTILAYER, 16V, B, 0.1uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
TAIYO YUDEN
EP015B104K-B-BZ
CAPACITOR, CERAMIC, MULTILAYER, 16V, B, 0.1uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
TAIYO YUDEN
EP015B104K-KE-CZ
CAPACITOR, CERAMIC, MULTILAYER, 16V, B, 0.1uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
TAIYO YUDEN
©2020 ICPDF网 联系我们和版权申明