AC3MDPHLBULK [AMPHENOL]
Audio/RCA Connector, 3 Pole(s), Solder Terminal;型号: | AC3MDPHLBULK |
厂家: | Amphenol |
描述: | Audio/RCA Connector, 3 Pole(s), Solder Terminal |
文件: | 总8页 (文件大小:535K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OBSOLETE
NOT FOR NEW DESIGNS
AC SERIES XLR
THERMOPLASTIC
CHASSIS MOUNT
CONNECTORS
This receptacle is manufactured from glass
filled UL94V-0 PBT Resin, and provides a
lower cost alternative to the ‘Z’ series metal
shell. A positive latch lock system secures
the mating cable connector. Manufactured to
comply with IEC 268-12 and AES 14-1992
standards. CSA File Number 68598
Options
Simple steps to guide you
in using this catalogue
tꢀ4PMEFSꢀ#VDLFUꢀUFSNJOBUJPO
tꢀ*OTVMBUJPOꢀ%JTQMBDFNFOUꢀ$POUBDUTꢀꢁ*%$ꢂ
tꢀ7FSUJDBMꢀ1$#ꢀDPOUBDUT
1) Identify the product group listed in
Contents on page 1 and go directly to
that page number.
2) Each product group cover page then details
information and options available.
Features
tꢀ)PSJ[POUBMꢀ1$#ꢀDPOUBDUT
tꢀ#VMLꢀ1BDLBHJOH
tꢀ5IFSNPQMBTUJDꢀ4IFMMꢄ
3) Refer to the product detail pages and identify
the product you require pictorially.
tꢀ4JOHMFꢀ#BHꢀQBDLT
tꢀ5IFꢀi%wꢀTJ[FꢀIPVTJOHꢀDBOꢀCFꢀFJUIFSꢀ
front or rear mounted using the same
panel cutout.
4) Read the product description column for the
products standard features.
tꢀ$PTUꢀFGGFDUJWFꢀTUBNQFEꢀDPOUBDUTꢀ
tꢀ-BUDIJOHꢀPSꢀ/POꢃMBUDIJOHꢄ
tꢀ"ꢀMFBEJOHꢀGJSTUꢀNBUFꢀMBTUꢀCSFBLꢀTPDLFUꢀDPOUBDUꢀ
is standard on all female connectors (Pin 1).
5) Use variations column to determine
your choice.
Ordering Codes
tꢀ4PMEFSꢀDVQꢀPSꢀ*OTVMBUJPOꢀ%JTQMBDFNFOUꢀ
Contact (IDC) as well as Vertical or Horizontal
PCB versions are available.
6) Identify part number.
We have listed the more common
ordering codes in each section.
For further options please refer to
the part number breakdown charts.
Please contact us if you need any
further assistance.
7) In the event the particular option you require
is not listed please refer to the part number
breakdown page at the end of each section.
tꢀ-BUDIJOHꢀBOEꢀ/POꢃMBUDIJOHꢀ
versions available.
8) Please contact us directly if you have any
further problems.
tꢀ"WBJMBCMFꢀJOꢀꢅꢀDPOUBDUꢀBSSBOHFNFOUTꢀPOMZꢄ
tꢀ$PNQBUJCMFꢀXJUIꢀBMMꢀPUIFSꢀ9-3ꢀCSBOETꢄ
59
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenolaudio.com
OBSOLETE
NOT FOR NEW DESIGNS
Features:
tꢀ5IFSNPQMBTUJDꢀTIFMMꢄ
tꢀ%ꢀUZQFꢀ'MBOHFꢄ
tꢀ4PMEFSꢀ#VDLFUꢀDPOOFDUJPOTꢄ
tꢀ7FSUJDBMꢀPSꢀ)PSJ[POUBMꢀ1$#ꢀNPVOUJOHꢄ
tꢀ4UBNQFEꢀDPOUBDUTꢄ
tꢀ-FBEJOHꢀGJSTUꢀNBUFꢀMBTUꢀCSFBLꢀTPDLFUꢀDPOUBDUꢄ
tꢀ1PTJUJWFꢀMBUDIꢀMPDLꢀTZTUFNꢄ
tꢀ$PMPVSFEꢀIPVTJOHTꢀBWBJMBCMFꢀBTꢀTQFDJBMTꢄ
Options: Solder Buckets, Vertical or Horizontal PCB, Bulk Pack, Latching or
Non-latching, Gold Plated Contacts, Machined Contacts.
Specifications: 64
PCB Footprints: 65
Part Number Breakdown: 61
Panel Cutouts: 65
PRODUCT - FIGURE
DRAWING
Dimensions in mm (inches)
DESCRIPTION
VARIATIONS
PART NUMBER
XLR 3 pole male,
D Flange,
Thermoplastic shell,
Solder Buckets
Standard
AC3MDP
Bulk Pack
AC3MDP BULK
AC3MDPL
Non-Latching
Non-Latching Bulk
Standard
AC3MDPL BULK
AC3MMDP
XLR 3 pole male,
D Flange, Airtight
Thermoplastic shell,
Machined Contacts,
Solder Buckets
Bulk Pack
AC3MMDP BULK
AC3MMDPL
Non-Latching
Non-Latching Bulk
Standard
AC3MMDPL BULK
AC3FDP
XLR 3 pole female,
D Flange, Thermoplas-
tic shell,
Bulk Pack
AC3FDP BULK
AC3FDPL
Solder Buckets
Non-Latching
Non-Latching Bulk
Standard
AC3FDPL BULK
AC3MDPH
XLR 3 pole male,
D Flange,
Thermoplastic
shell, Horizontal
PCB mount
Bulk Pack
AC3MDPH BULK
AC3MDPHL
Non-Latching
Non-Latching Bulk
Standard
AC3MDPHL BULK
AC3FDPH
XLR 3 pole female,
D Flange,
Thermoplastic
shell, Horizontal
PCB mount
Bulk Pack
AC3FDPH BULK
AC3FDPHL
Non-Latching
Non-Latching Bulk
Standard
AC3FDPHL BULK
AC3MDPV
XLR 3 pole male,
D Flange,
Thermoplastic shell,
Vertical PCB mount
Bulk Pack
AC3MDPV BULK
AC3MDPVL
Non-Latching
Non-Latching Bulk
Standard
AC3MDPVL BULK
AC3FDPV
XLR 3 pole female,
D Flange, Thermoplas-
tic shell,
Bulk Pack
AC3FDPV BULK
AC3FDPVL
Vertical PCB mount
Non-Latching
Non-Latching Bulk
AC3FDPVL BULK
60
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenolaudio.com
OBSOLETE
NOT FOR NEW DESIGNS
PART NUMBER BREAKDOWN
THERMOPLASTIC D TYPE FLANGE
AC 3 M D P V L
AU
BULK
-
E. G . AC3MDPVL-AU BULK
AC (Series Prefix),3 contacts, Male, D (Small Shell), P (Thermoplastic Chassis series)
Vertical Printed Circuit Board, Latchless - AU (Gold Plated Contacts), Bulk Packaged.
AC
3
Series Prefix
SERIES PREFIX
CONTACT LAYOUT
GENDER
=
=
=
=
=
=
=
=
=
=
=
=
=
3 Contacts only
F
Female Socket Contacts
Male Pin Contacts
M
MM
D
Male Machined Contacts
Small Shell
SHELL STYLE
SHELL SERIES
TERMINATION
P
Thermoplastic Chassis Series
Solder Buckets
Blank
V
Vertical Printed Circuit Board
Horizontal Printed Circuit Board
Latching
H
Blank
L
LOCKING
MECHANISM
Latchless (Non-Latching)
Blank
Standard Plating (Silver or Tin -
Refer to Standard Data.)
CONTACT PLATING
PACKAGING
AU
Gold Plated Contacts
=
=
=
Blank
BULK
Individual Bags
Bulk Packed
61
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenolaudio.com
OBSOLETE
NOT FOR NEW DESIGNS
The Insulation Displacement Contact (IDC) connector is ideal for Original
Equipment Manufacturers and end users alike and offers an alternative
to our standard solder connector. Connectors can be can be quickly and
easily assembled without screws or a soldering iron – by hand. Labour
savings of up to 60% in termination time can be achieved.
Recommended Cable Specifications: page 64
Features:
tꢀ5IFSNPQMBTUJDꢀ4IFMMꢄ
tꢀ0QUJPOBMꢀi%wꢆꢀi1wꢀPSꢀ%VBMꢀ)PVTJOHꢀGMBOHFꢀTJ[FTꢄꢀ
tꢀ*OTVMBUJPOꢀ%JTQMBDFNFOUꢀ$POUBDUTꢀꢁ*%$ꢂ
tꢀ4UBNQFEꢀDPOUBDUTꢄ
tꢀ-FBEJOHꢀGJSTUꢀNBUFꢀMBTUꢀCSFBLꢀTPDLFUꢀDPOUBDUꢄ
tꢀ1PTJUJWFꢀMBUDIꢀMPDLꢀTZTUFNꢄ
tꢀ$PMPVSFEꢀIPVTJOHTꢀBWBJMBCMFꢀBTꢀTQFDJBMTꢄ
Options: Gold plated contacts, Bulk Pack, Latching or Non-latching
Part Number Breakdown: page 63 Specifications: page 64
Assembly Instructions: page 66
Panel Cutouts: page 65
PRODUCT - FIGURE
DRAWING
Dimensions in mm (inches)
DESCRIPTION
VARIATIONS
PART NUMBER
XLR 3 pole male,
D Flange,
Standard
AC3MDPI
IDC contacts,
Thermoplastic shell
Bulk Pack
Non-Latching
AC3MDPI BULK
AC3MDPIL
Non-Latching Bulk
Standard
AC3MDPIL BULK
AC3FDPI
XLR 3 pole female,
D Flange,
IDC contacts,
Thermoplastic shell
Bulk Pack
AC3FDPI BULK
AC3FDPIL
Non-Latching
Non-Latching Bulk
Standard
AC3FDPIL BULK
AC3MPPI
XLR 3 pole male,
Wide Flange,
IDC contacts,
Thermoplastic shell
Bulk Pack
AC3MPPI BULK
AC3MPPIL
Non-Latching
Non-Latching Bulk
Standard
AC3MPPIL BULK
AC3FPPI
XLR 3 pole female,
Wide Flange,
IDC contacts,
Thermoplastic shell
Bulk Pack
AC3FPPI BULK
AC3FPPIL
Non-Latching
Non-Latching Bulk
AC3FPPIL BULK
62
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenolaudio.com
OBSOLETE
NOT FOR NEW DESIGNS
PART NUMBER BREAKDOWN
IDC D AND P THERMOPLASTIC CHASSIS TYPE
E. G . AC3MDPIL-AU BULK
AC 3 M D P
I
L
AU
BULK
-
AC (series prefix),3 contacts, Male, D Flange, Plastic Shell, IDC, Latchless,
- AU (Gold Plated Contacts), Bulk Packaged.
AC
3
Series Prefix
SERIES PREFIX
CONTACT LAYOUT
GENDER
=
=
=
=
=
=
=
=
3 Contacts only
Female Socket Contacts
Male Pin Contacts
D Flange
F
M
D
SHELL STYLE
SHELL SERIES
TERMINATION
P
Thermoplastic Chassis Series
IDC Termination
Latching
I
Blank
LOCKING
MECHANISM
L
Latchless
=
=
Blank
Standard Plating (Silver or Tin -
Refer to Standard Data.)
CONTACT PLATING
PACKAGING
AU
Gold Plated Contacts
=
=
=
Blank
BULK
Individual Bags
Bulk Packed
63
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenolaudio.com
OBSOLETE
NOT FOR NEW DESIGNS
STANDARD DATA AC CHASSIS - THERMOPLASTIC
VALUE
Number of contacts
3
GENERAL
CHARACTERISTICS
AC Series Contact Arrangements
(Front view of pin inserts)
Termination
Solder / IDC / Printed Circuit Board (PCB)
Wire Gauge - Stranded wire:
IDC
24AWG
12AWG
Solder
Printed Circuit Board (PCB)
Flammability
N/A
UL94V-0
Environmental
Complies with EU RoHS 2 Directive 2011/65/EU
133V 1)
1400V
ELECTRICAL
CHARACTERISTICS
Service Voltage RMS
Test Voltage AC RMS
Current carrying capacity:
IDC
1A
Solder
15A
15A
Printed Circuit Board (PCB)
Typicial Contact Resistance
Insulation Resistance
Protection Class
)3mΩ
*1000MΩ
IP40
CLIMATIC
CHARACTERISTICS
Operating Temperature
Weight2)
-25˚C to +75˚C (-13°F to +167°F)
14g - (0.030lb)
MECHANICAL
CHARACTERISTICS
Mechanical Operations
Connector Shell - Thermoplastic
Shell Finish
1000 mating cycles
Thermoplastic, ULV94V-0 Modified PPE Resin
Black, other colours available - contact factory
ULV94V-0 PBT Resin or Modified PPE Resin
MATERIALS
Insulators
Male Contact
Stamped IDC-Material/Plating
Phosphor Bronze / Silver or Gold (optional)
Phosphor Bronze / Silver or Gold (optional)
Stamped Solder and PCB-Material/Plating
Female Contact
Stamped IDC-Material/Plating
Stamped Solder and PCB-Material/Plating
Phosphor Bronze / Tin or Gold (optional)
Phosphor Bronze / Tin or Gold (optional)
IDC RECOMMENDED
CABLE DIMENSIONS
1)
Not suitable for domestic applications above 50V
Approximate weight in grams does not include packaging. Please contact us for exact weight for shipping purposes.
2)
64
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenolaudio.com
OBSOLETE
NOT FOR NEW DESIGNS
AC SERIES RECEPTACLES THERMOPLASTIC
MOUNTING INFORMATION
‘D’ SERIES
90˚ PCB (H)
‘D’ SERIES
STRAIGHT PCB (V)
PCB FOOTPRINT
- CONNECTOR SIDE OF PCB
AC3FDPH
AC3MDPH
AC3FDPV
AC3MDPV
PANEL CUTOUT DIMENSIONS - FRONT VIEW
AC3FDP / AC3MDP
65
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenolaudio.com
OBSOLETE
NOT FOR NEW DESIGNS
AC IDC SERIES CHASSIS
ASSEMBLY INSTRUCTIONS
Lay the insulated conductors between the wire
holding fingers. The fingers will retain the wire
if it is inserted sufficiently.
1
2
3
Break the strap off from the wire holder
and the cap. Assemble the cap to the wire
holder as shown. Push it home until the
second snap operates.
Align the wire holder and cap assembly with
the slots down the side of the connector body.
Push together, being careful not to damage the
IDC blades through misalignment.
Ensure wire holder snaps into the body.
4
66
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801
www.amphenolaudio.com
相关型号:
©2020 ICPDF网 联系我们和版权申明