88-569789-35G [AMPHENOL]
MIL Series Connector,;型号: | 88-569789-35G |
厂家: | Amphenol |
描述: | MIL Series Connector, 连接器 |
文件: | 总53页 (文件大小:1309K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
Amphenol Cylindrical Connectors
for Printed Circuit Board Applications
12-170-2
Proven & reliable cylindrical
connector solutions for PC
board attachment:
MIL-DTL-38999, MIL-C-26482
and MIL-5015, with a wide
range of contact
arrangements and options
Amphenol
This catalog has been specifically designed to
assist in the critical process of selecting
the right cylindrical connector for a printed circuit
board application.
Contact arrangements have been carefully
selected to guide designers to the most
commonly available and widely used
insert patterns.
Pin-out location illustrations of these
contact insert patterns are shown first,
followed by connector shell drawings in
three series:
17
10
32
25
40
4
47
53
1
3
55
52
9
16
46
31
24
39
MIL-DTL-38999, MIL-C-26482, MIL-5015.
For more information on the wide
variety of PC tail contacts that are
offered by Amphenol, see catalog 12-130,
High Frequency Contacts, which also
includes coax, twinax, triax and quadrax
shielded contacts.
Table of Contents
Amphenol® Cylindrical Connectors
for Printed Circuit Board Applications
Page
Introduction .............................................................................. 1
Guide to Selecting a PCB Cylindrical Connector .................. 2, 3
Insert Availability ...................................................................... 4
Insert Arrangment Drawings................................................ 5-24
Alternate Positioning ......................................................... 25-26
MIL-DTL-38999, Series I (LJT) Shell Styles ...................... 27-31
MIL-DTL-38999, Series II (JT) Shell Styles ....................... 32-34
MIL-DTL-38999, Series III (Tri-Start) Shell Styles ............. 35-39
Stand-off Adapter for use with MIL-DTL-38999
PCB Connectors..................................................................... 40
MIL-C-26482, Series 1 (PT) Shell Styles.......................... 41, 42
MIL-5015 (MS3102) Shell Style.............................................. 43
Universal Header Assemblies for use with
Flex print or PCB Connectors........................................... 44, 45
Additional Products – Rectangular, for PCB Application ... 46-48
Amphenol Sales Office and Distributor Listing
If more information is needed concerning the products in this publica-
tion, or if you have any special application needs, please contact your
nearest Amphenol sales office or Amphenol Corporation at the
following address:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Ave., Sidney, NY 13838-1395
Phone: 800-678-0141 or 607-563-5011
Fax: 607-563-5157
See this catalog and the majority of catalogs of Amphenol Aerospace
and Amphenol Industrial Interconnection Products at:
www.amphenol-aerospace.com
Amphenol operates quality systems that are certified to ISO9001:2000
by third party registrars.
®
Amphenol Cylindrical Connectors
for Printed Circuit Board Applications
Amphenol provides three popular connector series with PC tail contacts. The following key
points give a quick overview of these series. For more detail, there are series catalogs avail-
able as listed below*. Go to www.amphenol-aerospace.com to view and download these
catalogs. There is a guide to selecting a cylindrical connector with printed circuit board con-
tacts on the following page to assist you further.
MIL-DTL-38999 CONNECTORS, METAL & COMPOSITE
• Lightweight, compact, high density and high reliability cylindrical
• Operating voltage to 900 VAC (RMS) at sea level
• Environmentally resistant
38999 Series III Box Mount Connector
with PC Tails
• Solder or crimp rear release contacts in mating plug
• Series I (LJT) - Bayonet coupling
• Scoop-proof (recessed pins) offers maximum contact
protection
•
Series II (JT) - Bayonet coupling
• For applications requiring maximum weight/space
savings and reliability
• Series III (Tri-Start) - Threaded, quick coupling in one
complete turn
• Designed for general duty as well as severe environmental
applications
Special 38999 Connector with
Stand-off Shell and
PC Tails
38999 Series III Connector with a Special
Configuration Composite Shell and PC
Tails
• Superior EMI shielding with grounding fingers and
metal-to-metal mating
• Filter/Transient protection versions available
• Scoop-proof contact protection
• Stainless steel firewall versions, and composite versions
MIL-C-26482 CONNECTORS
• Medium size, widely used cylindrical
• Operating voltage to 1,000 VAC (RMS) at sea level
• Series 1 (PT) - Bayonet coupling - most commonly used in PCB
applications
• Environmentally resistant
• Solder or crimp front and rear release contacts in mating plug
Black/green zinc alloy plating (cadmium-free) available
26482 Series 1 Jam Nut
Connector with PC Tails
5015 Box Mount Connector
with PC Tails
MIL-5015 CONNECTORS
• Medium–heavy weight, time-tested cylindrical
• Operating voltage to 1,500 VAC (RMS) at sea level
• Environmentally resistant or general duty
• Threaded coupling
• Solder or crimp rear insertion contacts in mating plug
• Black/green zinc alloy plating (cadmium-free) available
Also provided in this catalog are several additional product options for the
designer of PCB board applications. For example: Amphenol’s flex assemblies
provide solutions for attachment to PCB boards where a self-locking terminal
pad is needed or in tight-fitting space requirements. Connectors with compliant
pin contacts are available, and pc tails within shielded coax, twinax and triax
contacts are available. At the end of the catalog, see a brief description of
Amphenol PCB rectangular connectors, backplane assemblies, terminal blocks
and wiring interface modules.
Flex Termination with MIL-C-26482 Special Con-
nector
* Request Catalog 12-090 for MIL-DTL-38999 Series I, II
Request Catalog 12-092 for MIL-DTL-38999 Series III
Request Catalog 12-070 for MIL-C-26482, Series 1, 2
Request Catalog 12-071 for Matrix MIL-C-26482 Series 2
Request Catalog 12-020 for MIL-5015
Go to www.amphenol-aerospace for catalogs online.
Note: MIL-DTL-38999 supersedes MIL-C-38999.
1
Guide to Selecting a PCB Cylindrical
Connector
The connector selection process is one of the most important engineering deci-
sions to be made in any electronic application. Amphenol has created this cat-
alog specifically to provide the necessary information to select, layout and
design both the appropriate Amphenol® cylindrical connector with PCB con-
tacts and the connector footprint (contact locations) on the printed circuit
board. The guide that follows is for application of cylindrical connectors on rigid
printed circuit boards and also applies if a flex print assembly or other optional
is being used.
Engineers working on those PCB or flex print applications requiring rectangular
connectors are encouraged to refer to page 46-48 and ask for Amphenol Rect-
angular Product catalogs.
How To Select a Cylindrical Connector for a PCB Application
The data provided in this catalog is based on three cylindrical connector series:
MIL-DTL-38999 Series I, II and III, MIL-C-26482 Series 1, and MIL-C-5015.
See page 1 for electrical and environmental features and differences of these
three series. The “hot” side of the application determines the choice of pin or
socket genders of the contacts.
How to Measure the PCB Tail Length
The tail length of the PCB is the portion of the contact that extends beyond the
rear of the shell. This length will vary in relationship to the mounting flange,
depending on the series of connector selected. Standard lengths are shown on the connector shell style
drawings in this
catalog. These shell style drawing pages also provide how to order part numbering for standard PCB cylin-
drical connectors.
When computing the desired tail length, it is important to take into consideration the following factors:
•
•
The connector series and shell style.
The mounting style of the receptacle; jam nut (D hole) or panel mount (four holes).
This can affect the overall length of the tail.
•
•
The extension of the tail beyond the opposite side of the board or the flex.
The space required to adequately clean flux from between the board or flex and the rear
of the connector shell. Connectors that are mounted flush against the board may trap
soldering flux which could lead to corrosion of the solder joints.
Would Alignment Discs, Headers or
Special Stand-off Shells be Beneficial?
Stand-off Adapter on a Jam Nut
Receptacle.
Any mechanical methods needed to stabilize the
board or flex to the connector and/or the panel.
The PCB tails shown in this catalog are of one
diameter. Stepped tails or PCB tails with an
increased diameter on a designated portion may
be required for certain applications.
Alignment discs are available which provide ease
of alignment of pins to boards, protection during
shipment and optimized electrical circuit separa-
tion. Header assemblies (see pages 44 & 45) are
available which provide time and cost saving
potentials. Standoffs may be required for certain
applications. Amphenol has developed a new
stand-off adapter (see page 40) which may elimi-
nate the need for special stand-off shell designs.
Connectors with clinch nuts can be provided.
Please call Amphenol to discuss any optional
designs or any special requirements.
Special Design with Longer PC Tails in
a 38999 Composite Shell Connector.
Also shows an Alignment Disc.
Universal Header Assemblies are available
for Flex Print/PC Board Mounting. Beneficial
especially when electrical testing of the con-
nector requires it to be removed and reat-
tached.
2
Guide to Selecting a PCB Cylindrical
Connector, cont.
What Determines the Diameter of the PCB Tail?
The outside diameter of the PCB tail is determined by the inside diameter of the plated through-hole on
the board or flex print. The standard or most popular diameters are shown in the chart on the next page
and are called out in the connector illustrations in this catalog (Pgs. 26-37).
Standard diameters of PCB tails
Connector Series
MIL-DTL-38999
MIL-C-26482
MIL-5015
Size 16 Contact
.062 ±.001
Size 20 Contact
.019 ±.001
Size 22D Contact
.019 ±.001
.030 ±.001
.030 ±.001
Not available
Not available
.030 ±.001
Not available
For availability of other contact diameters, consult Amphenol, Sidney NY.
Should PCB Tails be Gold Plated or Pre-tinned?
The standard PCB tails for MIL-DTL-38999 and MIL-C-26482 receptacles
have gold plating, .00050 inches over nickel. PCB tails for MIL-C-5015
receptacles are plated with silver, .00010 inches over copper. Amphenol
can substitute a pre-tinned version of these tails to facilitate the termination
process. This pre-tinning is a 60/40 lead-tin alloy. Call Amphenol for further
information on pre-tinning and any other plating of contacts not covered in
this catalog.
Would Flex Assemblies be Necessary or Beneficial for the
Application?
Flex print can radically simplify the assembly of a connector to a system, as
well as eliminate wiring errors. Amphenol offers connector flex assemblies
through ACT, Advanced Circuit Technologies division. Features and bene-
fits of using flex technology include:
Flex Termination for Attachment to PC Boards
•
Available for MIL-DTL-38999 (including filter EMI/EMP types),
MIL-5015 and MIL-C-26482 cylindrical connectors
•
•
•
Sculptures® Flexible Circuits with built-in terminations
Eliminates failures associated with crimped or solder-on contacts
Geometrically fit tight space requirements and create a self-locking
terminal pad
Should Other PC Tail Contact Types be Considered?
Press-Fit Connectors with compliant pins are available which engage
the plated through-holes in the board without the need for soldering.
This optional contact style offers the following benefits
Compliant Pin Contacts in a Bayo-
net 38999 Catalog
•
•
•
•
Easy board repairability
Improved board processing time
Excellent temperature performance
Ideal for low-lead applications
For more information on Press-Fit connectors with compliant pins refer
to Amphenol data sheet #188.
Special Quadrax contacts have been designed with PC tails. Coax, twi-
nax and triax contacts can also have PC tails. Refer to Amphenol cata-
log 12-130. Go online at www.amphenol-aerospace.com or consult
Amphenol Aerospace for further information.
Quadrax PC Tail Contacts
Combined with Standard PC
Tail Contacts
Quadrax Contacts with PC
Tails in a 38999 Connector with
Special Stand-off Shell
3
Cylindrical Connectors with PCB contacts
insert availability
The following table lists the most commonly used insert arrangements for printed circuit board application of
MIL-DTL-38999, MIL-C-26482 and MIL-C-5015 cylindrical connectors. This represents the most readily avail-
able patterns within these series. See illustrations of these selected patterns on the following pages. If you
require other arrangements than what are shown here, consult Amphenol for further availability.
MIL-DTL-38999
Contact Size*
JT
Series II
LJT
Series I
Tri-Start
Series III
Service
Rating
Total
Contacts
MIL-C-26482
8-3
MIL-5015
10SL-3
22D
20
3
16
8-3
9-3
M/I
3
6
8-35
8-98
9-35
9-98
9-35
9-98
M
6
8-98
I
3
3
A
3
3
10-5
11-5
11-6
11-5
10-5
10-6
I
5
5
6
I
6
10-35
12-3
11-35
13-3
11-35
M
13
3
13
22
12-3
II
3
6
12-10
I
10
22
6
10
12-35
13-35
13-35
M
14S-6
Inst.
14-18
14-19
14-35
15-18
15-19
15-35
15-18
15-19
15-35
14-18
14-19
I
18
19
37
7
18
19
I
M
37
55
16S-1
18-1
A
7
16-26
16-35
17-26
17-35
17-26
17-35
16-26
I
26
55
10
11
32
66
13
27
79
41
19
100
55
16
24
31
128
61
35
26
32
M
A/Inst.
10
11
18-11
18-32
18-35
19-11
19-32
19-35
19-11
19-32
19-35
18-11
18-32
II
I
M
66
79
20-11
22-14
Inst.
13
19
20-27
20-35
20-41
21-27
21-35
21-41
20-27
20-41
I
M
I
27
41
21-35
21-41
A
M
I
22-35
22-55
23-35
23-55
23-35
23-55
100
22-55
55
61
24-5
A
Inst.
I
16
24
31
24-28
24-31
24-35
24-61
24-31
24-61
25-35
25-61
25-35
25-61
M
I
128
28-15
A
35
* For information on size 12 PC tail contacts consult Amphenol Aerospace.
4
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #8-3 / 9-3
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
8-3
Series I
9-3
Series III
NA
Series 1 & 2
8-3
MIL-5015
NA
Number of
Contacts
Contact
Size
Service
Rating*
Front face of pin insert shown
3
20
M/I
.018
.079
C
A
B
.056
*Service Rating: M for MIL-DTL-38999
I for MIL-C-26482
.056
Insert Arrangement #8-35 /9-35
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
8-35
9-35
9-35
NA
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
6
22D
M
.045
.078
.045
1
2
5
6
4
3
.090
.078
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
5
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #8-98 / 9-98
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
8-98
Series I
9-98
Series III
9-98
Series 1 & 2
8-98
MIL-5015
NA
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
3
20
I
.038
.075
A
B
C
.065
.065
Insert Arrangement #10SL-3
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
Series I
Series III
Series 1 & 2
MIL-5015
10SL-3
NA
NA
NA
NA
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
3
16
A
.053
C
A
B
.105
.091
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
6
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #10-5 / 11-5
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
10-5
Series I
11-5
Series III
11-5
Series 1 & 2
10-5
MIL-5015
NA
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
5
20
I
.065
.065
.056
.130
A
E
D
B
C
.065
.113
.113
Insert Arrangement #10-6 / 11-6
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
NA
11-6
NA
10-6
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
6
20
I
.130
.065
A
B
F
C
D
E
.065
.130
.113
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
7
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #10-35 / 11-35
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
10-35
Series I
11-35
Series III
11-35
Series 1 & 2
NA
MIL-5015
NA
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
13
22D
M
.138
.085
.118
.146
.056
.146
1
10
11
13
2
3
9
12
4
8
7
5
6
.045
.045
.035
.118
.049
Insert Arrangement #12-3 / 13-3
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
12-3
13-3
NA
12-3
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
3
16
II
.058
C
A
B
.111
.094
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
8
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #12-10
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
NA
Series I
NA
Series III
NA
Series 1 & 2
12-10
MIL-5015
NA
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
10
20
I
.065
A
E
B
C
H
G
K
J
D
F
.120
.130
.195
Insert Arrangement #12-35 / 13-35
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
12-35
13-35
13-35
NA
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
.182
.126
22
22D
M
.107
.117
.088
.158
.045
.197
.026
.075
.120
1
21
11
.030
.093
.203
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
9
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #14S-6
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
NA
Series I
NA
Series III
NA
Series 1 & 2
NA
MIL-5015
14S-6
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
6
16
Inst.
A
.160
F
E
B
C
.080
D
.138
Insert Arrangement #14-18 / 15-18
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
14-18
15-18
15-18
14-18
Number of
Contacts
Contact
Size
Service
Rating
Front face of pin insert shown
18
20
I
.260
.260
.113
.252
L
A
K
M
N
B
T
U
P
E
J
C
S
R
H
D
G
F
.113
.225
.065
.130
.065
.130
.195
.195
All dimensions for reference only. For alternate rotations see pages 25 & 26
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
10
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #14-19 / 15-19
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
14-19
Series I
15-19
Series III
15-19
Series 1 & 2
14-19
MIL-5015
NA
19
20
I
Front face of pin insert shown
.065
.065
.225
.113
A
M
B
R
.113
L
N
C
D
K
V
U
J
S
F
T
E
H
G
.130
.195
.260
.130
.225
.195
.260
Insert Arrangement #14-35 / 15-35
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
14-35
15-35
15-35
NA
37
22D
M
Contact Hole Locations
Location
Contact Hole Locations
Location
Contact
Contact
Number
Front face of pin insert shown
X Axis
+.045
+.123
+.211
+.254
+.266
+.247
+.200
+.130
+.045
–.045
–.130
–.200
–.247
–.266
–.254
–.211
–.123
–.045
+.045
+.123
Y Axis
+.262
+.217
+.160
+.080
–.010
–.098
–.175
–.232
–.262
–.262
–.232
–.175
–.098
–.010
+.080
+.160
+.217
+.262
+.172
+.119
Number
X Axis
+.170
+.170
+.123
+.045
–.045
–.123
–.170
–.170
–.123
–.045
+.045
+.090
+.045
–.045
–.090
–.045
.000
Y Axis
+.040
–.050
–.127
–.172
–.172
–.127
–.050
+.040
+.119
+.172
+.074
–.004
–.082
–.082
–.004
+.074
–.004
1
2
21
22
3
23
4
24
5
25
1
6
26
7
27
31
21
8
28
9
29
10
11
12
13
14
15
16
17
18
19
20
30
31
11
32
33
34
35
36
37
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult Amphenol
Corp., Sidney, NY.
11
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #16S-1
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
NA
Series I
NA
Series III
NA
Series 1 & 2
NA
MIL-5015
16S-1
7
16
A
Front face of pin insert shown
.095
.165
F
A
E
G
B
D
C
.190
Insert Arrangement #16-26 / 17-26
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
NA
17-26
17-26
16-26
26
20
I
Contact Hole Locations
Location
Contact Hole Locations
Location
Contact
Contact
Number
Front face of pin insert shown
X Axis
.000
Y Axis
+.321
+.293
+.214
+.099
–.034
–.161
–.260
–.314
–.314
–.260
–.161
–.034
+.099
+.214
Number
X Axis
–.131
–.070
+.070
+.175
+.178
+.119
.000
Y Axis
+.293
+.177
+.177
+.094
–.036
–.151
–.203
–.151
–.036
+.094
+.065
–.065
A
B
C
D
E
F
R
S
T
+.131
+.239
+.305
+.319
+.278
+.189
+.067
–.067
–.189
–.278
–.319
–.305
–.239
U
V
W
X
Y
Z
A
B
R
T
G
H
J
C
E
P
S
U
V
a
Z
–.119
–.178
–.175
.000
b
D
N
K
L
a
c
M
W
Y
b
X
H
F
L
M
N
P
c
.000
K
G
J
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp., Sidney, NY.
12
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #16-35 / 17-35
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
16-35
Series I
17-35
Series III
17-35
Series 1 & 2
NA
MIL-5015
NA
55
22D
M
Contact Hole Locations
Location
Contact Hole Locations
Location
Contact
Contact
Number
Front face of pin insert shown
X Axis
–.312
–.312
–.312
–.242
–.234
–.234
–.234
–.234
–.234
–.172
–.156
–.156
–.156
–.156
–.156
–.156
–.089
–.078
–.078
–.078
–.078
–.078
–.078
–.078
.000
Y Axis
+.086
–.004
–.094
+.221
+.131
+.041
–.049
–.139
–.229
+.279
+.176
+.086
–.004
–.094
–.184
–.274
+.316
+.221
+.131
+.041
–.049
–.139
–.229
–.319
+.329
+.176
+.086
–.004
–.094
–.184
–.274
Number
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
X Axis
+.089
+.078
+.078
+.078
+.078
+.078
+.078
+.078
+.172
+.156
+.156
+.156
+.156
+.156
+.156
+.242
+.234
+.234
+.234
+.234
+.234
+.312
+.312
+.312
Y Axis
+.316
+.221
+.131
+.041
–.049
–.139
–.229
–.319
+.279
+.176
+.086
–.004
–.094
–.184
–.274
+.221
+.131
+.041
–.049
–.139
–.229
+.086
–.004
–.094
1
2
3
4
5
6
17
10
7
32
25
40
8
4
47
53
9
1
3
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
55
52
9
16
46
31
24
39
.000
.000
.000
.000
.000
.000
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
13
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #18-1
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating*
Series II
NA
Series I
NA
Series III
NA
Series 1 & 2
NA
MIL-5015
18-1
10
16
A/Inst.
Front face of pin insert shown
.095
H
A
I
G
B
F
J
C
D
E
.240
.240
* Contact Locations B, C, F, G are Service Rating A.
All other contact locations are Service Rating Inst.
.100
Insert Arrangement #18-11 / 19-11
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
18-11
19-11
19-11
18-11
11
16
II
Front face of pin insert shown
.250
.105
A
.105
.260
.132
J
B
H
K
L
C
G
F
D
.092
E
.053
.281
.215
.179
.275
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp., Sidney, NY.
14
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #18-32 / 19-32
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
18-32
Series I
19-32
Series III
19-32
Series 1 & 2
18-32
MIL-5015
NA
32
20
I
Contact Hole Locations
Location
Contact Hole Locations
Location
Contact
Contact
Letter
Front face of pin insert shown
X Axis
+.066
+.189
+.286
+.345
+.357
+.321
+.242
+.130
.000
Y Axis
+.353
+.305
+.217
+.098
–.033
–.160
–.265
–.335
–.359
–.335
–.265
–.160
–.033
+.098
+.217
+.305
+.353
+.230
Letter
X Axis
+.124
+.209
+.228
+.174
+.065
–.065
–.174
–.228
–.209
–.124
.000
Y Axis
+.193
+.095
–.033
–.151
–.221
–.221
–.151
–.033
+.095
+.193
+.096
.000
A
B
C
D
E
F
V
W
X
Y
Z
a
b
c
d
e
f
T
A
U
B
S
G
H
J
V
e
R
C
F
f
W
d
D
P
g
K
L
–.130
–.242
–.321
–.357
–.345
–.286
–.189
–.066
.000
j
X
c
N
E
h
Y
M
N
P
R
S
T
g
h
j
+.096
.000
b
M
Z
–.096
.000
a
L
G
J
–.096
K
H
U
Insert Arrangement #18-35 / 19-35
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
18-35
19-35
19-35
NA
66
22D
M
Front face of pin insert shown
.357
.279
.201
.360
.315
.270
.225
.180
.135
.123
.045
23 34
43
17
51
10
58
4
.090
.045
64
66
1
3
63
9
16
57
50
24
33
42
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp., Sidney, NY.
15
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #20-11
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
NA
Series I
NA
Series III
NA
Series 1 & 2
NA
MIL-5015
20-11
13
16
Inst.
Front face of pin insert shown
.138
.159
.239
L
C
B
.102
M
E
F
G
N
H
J
K
A
.080
D
.204
.276
.156
Insert Arrangement #20-27 / 21-27
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
20-27
21-27
NA
20-27
27
20
I
Front face of pin insert shown
.400
.275
.100
.225
.125
.150
.225
.275
.375
.400
A
B
S
R
P
C
a
b
N
D
T
Z
d
c
E
Y
M
U
F
L
V
X
K
W
H
G
.300
J
.200
.400
.100
.150
.250
.250
.050
.150
.025
.375
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp., Sidney, NY.
16
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #20-35 / 21-35
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
20-35
Series I
21-35
Series III
21-35
Series 1 & 2
NA
MIL-5015
NA
79
22D
M
Contact Hole Locations
Location
Contact Hole Locations
Location
Front face of pin insert shown
Contact
Number
Contact
X Axis
+.365
+.306
+.232
+.146
+.053
–.053
–.146
–.232
–.306
–.365
–.406
–.427
–.427
–.406
–.365
–.306
–.232
–.146
–.053
.000
Y Axis
–.227
–.302
–.362
–.404
–.426
–.426
–.404
–.362
–.302
–.227
–.141
–.048
+.048
+.141
+.227
+.302
+.362
+.404
+.426
+.323
+.322
+.280
+.220
+.141
+.048
–.048
–.141
–.220
–.280
–.322
–.347
–.322
–.280
–.220
–.141
Number
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
X Axis
–.332
–.332
–.311
–.258
–.184
–.098
–.048
+.048
+.134
+.208
+.237
+.237
+.208
+.134
+.048
–.048
–.134
–.208
–.237
–.237
–.208
–.134
–.048
+.048
+.125
+.155
+.125
+.048
–.048
–.125
–.155
–.125
.000
Y Axis
–.048
+.048
+.141
+.220
+.280
+.322
+.241
+.241
+.199
+.139
+.048
–.048
–.139
–.199
–.241
–.241
–.199
–.139
–.048
+.048
+.139
+.199
+.146
+.146
+.090
.000
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
1
31
51
79
21
71
61
41
11
+.098
+.184
+.258
+.311
+.332
+.332
+.311
+.258
+.184
+.098
.000
Contact Hole Locations
Location
Contact
Number
X Axis
+.053
+.146
+.232
+.306
+.365
+.406
+.427
+.427
+.406
Y Axis
+.426
+.404
+.362
+.302
+.227
+.141
+.048
–.048
–.141
–.090
–.146
–.146
–.090
.000
1
2
3
4
5
6
7
8
9
–.098
–.184
–.258
–.311
+.090
+.053
–.029
–.029
+.048
–.048
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
17
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #20-41 / 21-41
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
20-41
Series I
21-41
Series III
21-41
Series 1 & 2
20-41
MIL-5015
NA
41
20
I
Front face of pin insert shown
A
W
B
V
j
C
Z
U
X
k
Y
D
i
T
m
s
E
a
h
S
t
r
F
b
n
R
P
g
p
G
q
f
c
d
H
N
e
J
M
K
L
.300 DIA.
.567 DIA.
.835 DIA.
Insert Arrangement #22-14
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
Series I
Series III
Series 1 & 2
MIL-5015
22-14
NA
NA
NA
NA
19
16
A
.392
.196
Front face of pin insert shown
.336
M
N
L
A
U
B
C
D
K
P
J
T
V
R
H
S
.168
F
E
G
.098
.294
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp., Sidney, NY.
18
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #22-35 / 23-35
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
22-35
Series I
23-35
Series III
23-35
Series 1 & 2
NA
MIL-5015
NA
100
22D
M
Contact Hole Locations
Location
Contact Hole Locations
Location
Contact
Contact
Number
Front face of pin insert shown
X Axis
–.249
–.249
–.249
–.249
–.249
–.249
–.166
–.166
–.166
–.166
–.166
–.166
–.166
–.166
–.166
–.166
–.083
–.083
–.083
–.083
–.083
–.083
–.083
–.083
–.083
–.083
–.083
.000
Y Axis
+.095
.000
Number
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
X Axis
+.083
+.083
+.083
+.083
+.083
+.083
+.166
+.166
+.166
+.166
+.166
+.166
+.166
+.166
+.166
+.166
+.249
+.249
+.249
+.249
+.249
+.249
+.249
+.249
+.249
+.332
+.332
+.332
+.332
+.332
+.332
+.332
+.332
+.428
+.467
+.488
+.415
+.488
+.428
+.428
Y Axis
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
.000
–.095
–.190
–.285
–.380
–.475
+.428
+.333
+.238
+.143
+.048
–.047
–.142
–.237
–.332
–.427
+.380
+.285
+.190
+.095
.000
–.095
–.190
–.285
–.380
+.428
+.333
+.238
+.143
+.048
–.047
–.142
–.237
–.332
–.427
+.475
+.380
+.285
+.190
+.095
.000
56
35
25
67
4 6
77
16
8
86
1
94
2
95
97
3
5
96
98
4
99
6
7
100
15
93
2 4
85
5 5
3 4
76
4 5
66
Contact Hole Locations
Location
–.095
–.190
–.285
–.380
+.333
+.238
+.143
+.048
–.047
–.142
–.237
–.332
+.241
+.154
+.061
.000
Contact
Number
–.095
–.190
–.285
–.380
–.475
+.428
+.333
+.238
+.143
+.048
–.047
–.142
–.237
–.332
–.427
+.475
+.380
+.285
+.190
+.095
X Axis
–.428
–.467
–.488
–.415
–.488
–.428
–.428
–.332
–.332
–.332
–.332
–.332
–.332
–.332
–.332
–.249
–.249
–.249
Y Axis
+.241
+.154
+.061
.000
1
2
3
4
5
–.061
–.142
–.237
+.333
+.238
+.143
+.048
–.047
–.142
–.237
–.332
+.380
+.285
+.190
.000
6
.000
7
.000
8
.000
9
.000
10
11
12
13
14
15
16
17
18
.000
.000
.000
.000
+.083
+.083
+.083
+.083
+.083
–.061
–.142
–.237
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
19
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #22-55 / 23-55
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
22-55
Series I
23-55
Series III
23-55
Series 1 & 2
22-55
MIL-5015
NA
55
20
I
Front face of pin insert shown
.325
.260
A
U
T
B
V
p
n
C
W
q
S
k
m
X
r
Y
.455
AA
GG
FF
.390
D
R
P
z
y
x
g
BB
CC
j
i
Z
a
E
F
HH
s
t
DD
N
EE
v
w
b
h
u
c
M
G
d
f
.195
.130
L
e
H
J
K
.065
.112
.225
.336
.450
Insert Arrangement #24-5
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
Series I
Series III
Series 1 & 2
MIL-5015
24-5
NA
NA
NA
NA
16
16
A
Front face of pin insert shown
.035
.067
.238
.137
.340
A
B
C
E
D
G
H
F
L
K
J
N
M
R
P
.168
S
.270
.371
.352
.176
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp., Sidney, NY.
20
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #24-28
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
NA
Series I
NA
Series III
NA
Series 1 & 2
NA
MIL-5015
24-28
24
16
Inst.
Front face of pin insert shown
.356
.089
.178
.308
B
A
.154
D
C
E
R
J
F
H
G
P
Z
L
N
Y
K
M
X
Q
T
S
V
U
W
.267
.445
Insert Arrangement #24-31 / 25-31
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
Series I
Series III
Series 1 & 2
MIL-5015
NA
24-31
NA
NA
24-31
31
16
I
Front face of pin insert shown
M
A
L
N
a
B
Z
f
P
.455
.364
Y
Q
b
K
C
D
g
d
X
R
e
c
J
.182
.273
W
S
V
T
.091
H
U
E
G
F
.158
.474
.316
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp., Sidney, NY.
21
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #24-35 / 25-35
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
24-35
Series I
25-35
Series III
25-35
Series 1 & 2
NA
MIL-5015
NA
128
22D
M
Contact Hole Locations
Contact Hole Locations
Location
X Axis
Location
X Axis
Contact
Number
Contact
Number
Front face of pin insert shown
Y Axis
+.190
+.095
.000
Y Axis
–.190
–.285
–.380
–.475
+.531
+.427
+.332
+.237
+.142
+.047
–.047
–.142
–.237
–.332
–.427
–.522
+.496
+.380
+.285
+.190
+.095
.000
–.095
–.190
–.285
–.380
–.475
+.444
+.332
+.237
+.142
+.047
–.047
–.142
–.237
–.332
–.427
+.357
+.190
+.095
.000
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
–.249
–.249
–.249
–.249
–.249
–.249
–.249
–.249
–.160
–.166
–.166
–.166
–.166
–.166
–.166
–.166
–.166
–.166
–.166
–.166
–.083
–.083
–.083
–.083
–.083
–.083
–.083
–.083
–.083
–.083
–.083
.000
78
79
80
+.083
+.083
+.083
+.083
+.160
+.166
+.166
+.166
+.166
+.166
+.166
+.166
+.166
+.166
+.166
+.166
+.249
+.249
+.249
+.249
+.249
+.249
+.249
+.249
+.249
+.249
+.249
+.332
+.332
+.332
+.332
+.332
+.332
+.332
+.332
+.332
+.332
+.424
+.415
+.415
+.415
+.415
+.415
+.424
+.479
+.520
+.546
+.555
+.546
+.520
+.479
59
–.095
–.190
–.285
–.380
–.475
+.531
+.427
+.332
+.237
+.142
+.047
–.047
–.142
–.237
–.332
–.427
–.522
+.475
+.380
+.285
+.190
+.095
.000
81
82
83
48
71
36
25
82
94
15
8
115
105
1
4
84
85
86
87
88
89
125
90
91
92
7
121
14
93
94
95
24
114
70
104
35
81
58
47
93
96
97
98
Contact Hole Locations
99
Location
X Axis
Contact
Number
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
Y Axis
+.279
+.190
+.095
.000
–.095
–.190
–.279
+.357
+.190
+.095
.000
1
2
–.479
–.520
–.546
–.555
–.546
–.520
–.479
–.424
–.415
–.415
–.415
–.415
–.415
–.424
–.332
–.332
–.332
–.332
–.332
–.332
–.332
–.332
–.332
–.332
–.249
–.249
–.249
3
4
5
–.095
–.190
–.285
–.380
–.475
+.522
+.427
+.332
+.237
+.142
+.047
–.047
–.142
–.237
–.332
–.427
–.555
+.475
+.380
+.285
+.190
+.095
.000
6
7
8
9
.000
.000
.000
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
–.095
–.190
–.357
+.444
+.332
+.237
+.142
+.047
–.047
–.142
–.237
–.332
–.427
+.496
+.380
+.285
.000
.000
.000
.000
.000
.000
.000
.000
–.095
–.190
–.357
+.279
+.190
+.095
.000
–.095
–.190
–.279
+.083
+.083
+.083
+.083
+.083
+.083
+.083
–.095
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp., Sidney, NY.
22
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #24-61 / 25-61
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
24-61
Series I
25-61
Series III
25-61
Series 1 & 2
24-61
MIL-5015
NA
61
20
I
Contact Hole Locations
Location
Contact Hole Locations
Location
Front face of pin insert shown
Contact
Number
Contact
Number
X Axis
+.196
+.314
+.413
+.485
+.527
+.536
+.511
+.454
+.368
+.259
+.134
.000
Y Axis
+.500
+.435
+.343
+.230
+.101
–.030
–.164
–.287
–.391
–.470
–.519
–.537
–.519
–.470
–.391
–.287
–.164
–.030
+.101
+.230
+.343
+.435
+.500
+.454
+.454
+.363
+.283
+.175
+.046
–.088
X Axis
+.341
+.251
+.133
.000
Y Axis
–.213
–.314
–.379
–.402
–.379
–.314
–.213
–.088
+.046
+.175
+.283
+.363
+.338
+.223
+.122
–.010
–.139
–.233
–.267
–.233
–.139
–.010
+.122
+.223
+.200
+.094
–.041
–.132
–.041
+.094
.000
A
B
C
D
E
F
G
H
J
h
i
j
k
m
n
–.133
–.251
–.341
–.392
–.399
–.362
–.285
–.173
.000
A
b
p
Z
a
B
Y
q
v
c
C
X
u
r
w
GG
D
E
F
W
HH
t
d
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
s
x
FF
EE
NN
JJ
PP
V
U
e
s
t
y
KK
z
u
MM
DD
r
f
LL
BB
–.134
–.259
–.368
–.454
–.511
–.536
–.527
–.485
–.413
–.314
–.196
–.068
+.068
+.173
+.285
+.362
+.399
+.392
v
T
G
H
g
q
w
+.147
+.237
+.267
+.228
+.131
.000
CC
AA
S
h
p
x
J
R
i
y
k
P
m
M
j
K
N
z
L
AA
BB
CC
DD
EE
FF
GG
HH
JJ
KK
LL
MM
NN
PP
–.131
–.228
–.267
–.237
–.147
.000
b
c
+.105
+.135
.000
d
e
f
–.135
–.105
.000
g
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
23
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #28-15
JT
LJT
Tri-Start
Connector Type:
Insert Designation:
Contact Locations
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482
Number of
Contacts
Contact
Size
Service
Rating
Series II
NA
Series I
NA
Series III
NA
Series 1 & 2
NA
MIL-5015
28-15
35
16
A
Front face of pin insert shown
.552
.460
.368
.276
.092
.229
B
F
A
E
C
R
G
V
D
K
N
c
L
H
.070
.089
J
M
.547
.388
W
P
S
T
U
X
Y
j
a
Z
b
k
.407
.509
g
e
f
d
h
.248
l
m
.106
.184
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
24
Cylindrical Connectors with PCB contacts
alternate positioning available
for MIL-DTL-38999 connectors
To avoid cross-plugging problems in applications requiring the use of more than one connector of the same series, size and arrange-
ment, alternate rotations are available as indicated in the accompanying charts.
In MIL-DTL-38999 Series I, II and III connectors the rotation is based on rotating the master key/keyway in the connector shell.
A plug with a given rotation letter will mate with a receptacle with the same rotation letter. Only the master key/keyway rotates in the
shell, and the insert always remains in the same position relative to the minor keys. Refer to diagrams below for each connector series.
LJT (MIL-DTL-38999 Series I) KEY/KEYWAY ROTATION
AB ANGLE OF ROTATION (Degrees)
Shell
NORMAL
Size
Normal°
A°
77
81
75
74
77
77
77
80
80
B°
C°
D°
A
D
9
95
–
–
113
109
115
116
113
113
113
110
110
C
B
ROTATION
LETTERS
11
13
15
17
19
21
23
25
95
67
63
61
65
65
65
69
69
123
127
129
125
125
125
121
121
AB
95
95
95
LJT & JT CONNECTORS
ALTERNATE ROTATION CROSS
REFERENCE LETTERS
95
95
5 LJT REF
˚
95
Pins in
Alternate
Rotations
Sockets in
Alternate
Rotations
95
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of LJT connector receptacle shown)
JT (MIL-DTL-38999 Series II) KEY/KEYWAY ROTATION
PA = E
PB = R
PC = W
PD = Y
SA = F
SB = T
SC = X
SD = Z
AB ANGLE OF ROTATION (Degrees)
Shell
Size
Normal°
A°
82
86
80
79
82
82
82
85
85
B°
C°
D°
8
100
–
–
118
114
120
121
118
118
118
115
115
NORMAL
Explanation:
Use P at end of part number for pin
contacts in Normal position.
Use S at end of part number for
socket contacts in Normal position.
Use cross reference letters given in
chart above for alternate rotations.
A
D
10
12
14
16
18
20
22
24
100
72
68
66
70
70
70
74
74
128
132
134
130
130
130
126
126
C
B
ROTATION
LETTERS
100
AB
100
100
100
100
100
10 JT REF
˚
100
Tri-Start (MIL-DTL-38999 Series III) KEY/KEYWAY ROTATION
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of JT connector receptacle shown)
Key & Keyway
Arrangement
Identification Letter
TRI-START CONNECTORS
ALTERNATE ROTATION CROSS
REFERENCE LETTERS
Shell
Size
AR°
BSC
BR°
BSC
CR°
BSC
DR°
BSC
N
A
B
C
D
E
N
A
B
C
D
E
N
A
B
C
D
E
N
A
B
C
D
E
105
102
80
140
132
118
140
155
131
141
156
145
156
146
141
142
170
169
140
145
153
142
170
169
140
145
153
215
248
230
205
234
197
208
182
195
220
176
184
196
200
200
200
180
197
196
200
200
200
180
197
265
320
312
275
304
240
236
292
252
255
298
242
293
310
244
257
280
272
293
310
244
257
280
272
Pins in
Alternate
Rotations
Sockets in
Alternate
Rotations
MAIN
KEYWAY
9
35
PA = G
PB = I
SA = H
SB = J
SC = L
SD = N
SE = T
64
91
PC = K
PD = M
PE = R
AR
BSC
95
˚
113
90
11, 13,
and 15
BR
BSC
˚
53
Explanation:
Use P at end of part number for pin
contacts in Normal position.
Use S at end of part number for
socket contacts in Normal position.
Use cross reference letters given in
chart above for alternate rotations.
119
51
80
DR
BSC
CR
BSC
˚
˚
135
49
17 and
19
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of Tri-Start connector receptacle shown)
66
62
79
80
135
49
21, 23,
and 25
66
25
62
79
Cylindrical Connectors with PCB contacts
alternate positioning available
for MIL-C-26482 and MIL-5015 connectors
To avoid cross-plugging problems in applications requiring the use of more than one connector of the same series, size and arrange-
ment, alternate rotations are available as indicated in the accompanying charts.
In MIL-C-26482 and MIL-5015 connectors the rotation is based on rotation of the insert within the connector.
A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The front face of the pin insert is rotated
within the shell in a clockwise direction from the normal shell key. Refer to diagram below for both MIL-C-26482 and MIL-C-5015 con-
nectors.
MIL-C-26482 INSERT ROTATION
Insert Rotation
Degrees
Shell
Size
Insert
Arrangement
A
W
60
–
X
Y
Z
–
B
B
B
8
8-3
210
–
–
A
A
8
8-98
–
–
10
14
14
16
18
20
22
24
24
10-5
45
15
30
60
85
45
72
90
90
151
90
180
180
315
275
222
225
216
255
270
270
270
–
Position W
Position X
Position Y
Position Z
14-18
14-19
16-26
18-32
20-41
22-36
24-31
24-61
165
–
338
265
–
RELATIVE POSSIBLE POSITION
OF ROTATED INSERT
(front face of connector receptacle shown)
(MIL-C-26482 and MIL-C-5015)
138
126
144
225
180
288
–
324
MIL-26482 AND MIL-5015
CONNECTORS
ALTERNATE ROTATION CROSS
REFERENCE LETTERS
MIL-5015 INSERT ROTATION
Insert Rotation
Pins in
Alternate Rotations
Sockets in Alternate
Rotations
Degrees
Shell
Size
Insert
Arrangement
PW = G
PX = I
SW = H
SX = J
SY = L
SZ = N
W
–
X
–
Y
–
Z
–
10
14
16
18
20
22
24
28
10SL-3
14S-6
16S-1
18-1
PY = K
PZ = M
–
–
–
–
80
70
–
–
–
280
290
–
145
–
215
–
Explanation:
Use P at end of part number for pin contacts in
Normal position.
Use S at end of part number for socket con-
tacts in Normal position.
Use cross reference letters given in chart
above for inserts with alternate rotations.
20-11
22-14
24-28
28-15
80
80
80
110
110
110
250
250
250
280
280
280
26
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTPQ00R wall mounting receptacle
(back panel mounting)
L MAX
S
R
.006
.000
.905
(TP)
M
Z
PCB TAIL STICKOUT
R
(TP)
S
N
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZE 20 & 22D
CONTACTS
V
THREAD
SS
P
T
(4 HOLES)
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
•
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569701-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
+ .005 DIA
M
Z
M
+.000
–.005
P Max.
Panel
Thickness
S
+.011
–.010
T
V Thread
Class 2A
(Plated)
SS Dia.
+.000
–.016
Size
16 & 20
Contacts
Shell
Size
L
Max.
N
Dia.
R
(TP)
Dia.
±.005
Size 22D
Contacts
Part Number
88/91-569701-XXX
702-XXX
9
11
13
15
17
19
21
23
25
.453
.453
.453
.453
.453
.453
.484
.484
.484
.820
.820
.820
.820
.820
.820
.790
.790
.790
.572
.700
.234
.234
.234
.234
.234
.234
.204
.204
.193
.719
.812
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
1.812
.128
.128
.128
.128
.128
.128
.128
.147
.147
.4375-28 UNEF
.5625-24 UNEF
.6875-24 UNEF
.662 .281 – .235 .249 – .188
.810 .281 – .235 .249 – .188
.960 .281 – .235 .249 – .188
703-XXX
.850
.906
704-XXX
.975
.969
.8125-20 UNEF 1.085 .281 – .235 .249 – .188
.9375-20 UNEF 1.210 .281 – .235 .249 – .188
1.0625-18 UNEF 1.317 .281 – .235 .249 – .188
1.1875-18 UNEF 1.442 .281 – .235 .249 – .188
1.3125-18 UNEF 1.567 .281 – .235 .249 – .188
1.4375-18 UNEF 1.692 .281 – .235 .249 – .188
705-XXX
1.100
1.207
1.332
1.457
1.582
1.062
1.156
1.250
1.375
1.500
706-XXX
707-XXX
708-XXX
709-XXX
All dimensions for reference only.
27
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTPQ00R wall mounting receptacle
(back panel mounting) (with clinch nuts)
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
L MAX
S
.006
.000
.905
M
R
(TP)
Z
PCB TAIL STICKOUT
R
(TP)
S
N
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZE 20 & 22D
CONTACTS
V
T
THREAD
SS
THREAD
CLINCH NUT
P
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
•
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for pins
in normal position, S for sockets in normal position. See page 25 for alternate rotation letter
to use.
Example part number: 88-628701-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
+ .005 DIA
M
Z
Part Number
with
Clinch Nuts*
M
+.000
–.005
P Max.
Panel
Thickness (TP)
S
+.011
–.010
V Thread
Class 2A
(Plated)
SS Dia.
+.000
–.016
Size
16 & 20
Contacts Contacts
Shell
Size
L
Max.
N
Dia.
R
T
Size 22D
Thread
9
11
13
15
17
19
21
23
25
88/91-628701-XXX
702-XXX
.453
.453
.453
.453
.453
.453
.484
.484
.484
.820
.820
.820
.820
.820
.820
.790
.790
.790
.572
.700
.234
.234
.234
.234
.234
.234
.204
.204
.193
.719
.812
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
1.812
.112-40UNC-3B
.112-40UNC-3B
.112-40UNC-3B
.112-40UNC-3B
.112-40UNC-3B
.4375-28 UNEF
.5625-24 UNEF
.6875-24 UNEF
.662 .281 – .235 .249 – .188
.810 .281 – .235 .249 – .188
.960 .281 – .235 .249 – .188
703-XXX
.850
.906
704-XXX
.975
.969
.8125-20 UNEF 1.085 .281 – .235 .249 – .188
.9375-20 UNEF 1.210 .281 – .235 .249 – .188
705-XXX
1.100
1.207
1.332
1.457
1.582
1.062
1.156
1.250
1.375
1.500
706-XXX
.112-40UNC-3B 1.0625-18 UNEF 1.317 .281 – .235 .249 – .188
.112-40UNC-3B 1.1875-18 UNEF 1.442 .281 – .235 .249 – .188
.138-32UNC-3B 1.3125-18 UNEF 1.567 .281 – .235 .249 – .188
.138-32UNC-3B 1.4375-18 UNEF 1.692 .281 – .235 .249 – .188
707-XXX
708-XXX
709-XXX
All dimensions for reference only.
* Consult Amphenol for more information on ordering connectors with clinch nuts. There is also a 3mm clinch nut available (part number 88/91-628401/409)
28
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTP02R box mounting receptacle
(back panel mounting)
L MAX.
S
.006
.000
.905
R
(TP)
M
Z
PCB TAIL STICKOUT
R
(TP)
KK
N
S
.062 .001 DIA.
FOR SIZE 16 CONTACTS
SS
P
.019 .001 DIA.
FOR SIZE 20 &
22D CONTACTS
T
(4 HOLES)
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
•
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569711-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
+ .005 DIA
M
Z
M
+.000
–.005
N
+.001
–.005 Thickness
P Max.
Panel
S
+.011
–.010
T
KK Dia. SS Dia.
Size
16 & 20
Contacts
Shell
Size
L
Max.
R
(TP)
Dia.
±.005
+.006
–.005
+.000
–.016
Size 22D
Contacts
Part Number
9
11
13
15
17
19
21
23
25
88/91-569711-XXX .203
712-XXX .203
713-XXX .203
714-XXX .203
715-XXX .203
716-XXX .203
717-XXX .234
718-XXX .234
719-XXX .234
.820
.820
.820
.820
.820
.820
.790
.790
.790
.572
.700
.234
.234
.234
.234
.234
.234
.204
.204
.193
.719
.812
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
1.812
.128
.128
.128
.128
.128
.128
.128
.147
.147
.433
.557
.662 .454 – .401 .468 – .406
.810 .454 – .401 .468 – .406
.960 .454 – .401 .468 – .406
1.085 .454 – .401 .468 – .406
1.210 .454 – .401 .468 – .406
1.317 .454 – .401 .468 – .406
1.442 .454 – .401 .468 – .406
1.567 .454 – .401 .468 – .406
1.692 .454 – .401 .468 – .406
.850
.906
.676
.975
.969
.801
1.100
1.207
1.332
1.457
1.582
1.062
1.156
1.250
1.375
1.500
.926
1.032
1.157
1.282
1.407
All dimensions for reference only.
29
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTP02R box mounting receptacle
(back panel mounting) (with clinch nuts)
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
L MAX.
S
.006
.000
.905
R
(TP)
M
Z
PCB TAIL STICKOUT
R
(TP)
KK
N
S
.062 .001 DIA.
FOR SIZE 16 CONTACTS
T
SS
THREAD
CLINCH NUT
P
.019 .001 DIA.
FOR SIZE 20 &
22D CONTACTS
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
•
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-628701-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
+ .005 DIA
M
Z
Part Number
with
Clinch Nuts
M
+.000
–.005
N
+.001
P Max.
Panel
S
+.011
–.010
KK Dia.
+.006
–.005
SS Dia.
+.000
–.016
Size
16 & 20
Contacts
Shell
Size
L
Max.
R
T
Size 22D
Contacts
–.005 Thickness (TP)
Thread
9
11
13
15
17
19
21
23
25
88/91-628711-XXX .203
712-XXX .203
713-XXX .203
714-XXX .203
715-XXX .203
716-XXX .203
717-XXX .234
718-XXX .234
719-XXX .234
.820
.820
.820
.820
.820
.820
.790
.790
.790
.572
.700
.234
.234
.234
.234
.234
.234
.204
.204
.193
.719 1.031 .112-40UNJC-3B
.812 1.125 .112-40UNJC-3B
.906 1.172 .112-40UNJC-3B
.969 1.281 .112-40UNJC-3B
1.062 1.375 .112-40UNJC-3B
1.156 1.469 .112-40UNJC-3B
1.250 1.625 .112-40UNJC-3B
1.375 1.750 .138-32UNJC-3B
1.500 1.875 .138-32UNJC-3B
.433
.557
.662
.810
.454 – .401 .468 – .406
.454 – .401 .468 – .406
.454 – .401 .468 – .406
.454 – .401 .468 – .406
.454 – .401 .468 – .406
.454 – .401 .468 – .406
.454 – .401 .468 – .406
.454 – .401 .468 – .406
.454 – .401 .468 – .406
.850
.676
.960
.975
.801
1.085
1.210
1.317
1.442
1.567
1.692
1.100
1.207
1.332
1.457
1.582
.926
1.032
1.157
1.282
1.407
All dimensions for reference only.
* Consult Amphenol for more information on ordering connectors with clinch nuts. There is also a 3mm clinch nut available (part number 88/91-628410/419)
30
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJT07R jam nut receptacle
C
.328 MAX.
Z
T
PCB TAIL STICKOUT
A*
N
.062 .001 DIA.
FOR SIZE 16 CONTACT
.019 .001 DIA.
FOR SIZE 20 & 22D
CONTACTS
RR
THREAD
H
S
V THREAD
.062 MIN.
.125 MAX PANEL THICKNESS
.915 .005
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
•
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569721-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
★
.059 dia. min. 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
“D” shaped mounting hole dimensions
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
*
Z
A*
+.000
–.010
H Hex
+.017
–.016
N
+.001
–.005
T*
+.010
–.000
V Thread
Class 2A
(Plated)
RR Thread
Class 2A
(Plated)
Size
16 & 20
Contacts
Shell
Size
C
Max.
L
Max.
S
±.016
Size 22D
Contacts
Part Number
88/91-569721-XXX
722-XXX
9
11
13
15
17
19
21
23
25
.669
.769
.955
1.199
1.386
1.511
1.636
1.761
1.949
2.073
2.199
2.323
.875
1.000
1.188
1.312
1.438
1.562
1.688
1.812
2.000
.625
.625
.625
.625
.625
.656
.750
.750
.750
.572
.700
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
2.188
.697
.822
.4375-28 UNEF
.5625-24 UNEF
.6875-24 UNEF .229 – .175 .243 – .182
.8125-20 UNEF .229 – .175 .243 – .182
723-XXX
.850
1.007
1.134
1.259
.6875-24 UNEF 1.0000-20 UNEF .229 – .175 .243 – .182
.8125-20 UNEF 1.1250-18 UNEF .229 – .175 .243 – .182
.9375-20 UNEF 1.2500-18 UNEF .229 – .175 .243 – .182
724-XXX 1.084
725-XXX 1.208
726-XXX 1.333
727-XXX 1.459
728-XXX 1.580
729-XXX 1.709
.975
1.100
1.207
1.332
1.457
1.582
1.384 1.0625-18 UNEF 1.3750-18 UNEF .207 – .158 .221 – .165
1.507 1.1875-18 UNEF 1.5000-18 UNEF .207 – .158 .221 – .165
1.634 1.3125-18 UNEF 1.6250-18 UNEF .207 – .158 .221 – .165
1.759 1.4375-18 UNEF 1.7500-18 UNS .207 – .158 .221 – .165
All dimensions for reference only.
31
MIL-DTL-38999 Series II Type Connectors
with PCB contacts
JTPQ00R wall mounting receptacle
(back panel mounting)
.000
.005
.447
S
.438 MAX
R
(TP)
Z
SS
P
PCB TAIL STICKOUT
PANEL
THICKNESS
R
(TP)
S
N
AD
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
.000
.005
.322
T
4 HOLES
V THREAD
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
•
Example part number: 88-569731-35P designates shell size 8 with a 8-35 insert and pin
contacts in normal position.
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
+ .005 DIA
M
Z
N
+.001
–.005 Thickness
P Max.
Panel
T
V Thread
Class 2A
(Plated)
AD
Dia.
±.005
SS Dia.
+.000
–.016
Size
16 & 20
Contacts
Shell
Size
R
(TP)
S
±.016
Dia.
±.005
Size 22D
Contacts
Part Number
88/91-569731-XXX
732-XXX
8
10
12
14
16
18
20
22
24
.473
.590
.142
.142
.142
.142
.142
.142
.142
.142
.142
.594
.719
.812
.938
.120
.120
.120
.120
.120
.120
.120
.120
.147
.4375-28 UNEF
.5625-24 UNEF
.6875-24 UNEF
.8125-20 UNEF
.516
.633
.802
.927
.563
.680
.257 – .200 .268 – .178
.257 – .200 .268 – .178
.257 – .200 .268 – .178
.257 – .200 .268 – .178
.257 – .200 .268 – .178
.257 – .200 .268 – .178
.257 – .200 .268 – .178
.257 – .200 .268 – .178
.257 – .200 .268 – .178
733-XXX
.750
.812
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.859
734-XXX
.875
.906
.984
735-XXX
1.000
1.125
1.250
1.375
1.500
.969
.9375-20 UNEF 1.052
1.0625-18 UNEF 1.177
1.1875-18 UNEF 1.302
1.3125-18 UNEF 1.427
1.4375-18 UNEF 1.552
1.108
1.233
1.358
1.483
1.610
736-XXX
1.062
1.156
1.250
1.375
737-XXX
738-XXX
739-XXX
All dimensions for reference only.
32
MIL-DTL-38999 Series II Type Connectors
with PCB contacts
JTP02R box mounting receptacle
(back panel mounting)
.006
.000
S
.505
P
.000
.005
R
(TP)
.447
PANEL THICKNESS
Z
PCB TAIL STICKOUT
R
(TP)
S
AD
N
KK
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
.000
.005
.322
T
L
4 HOLES
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
•
Example part number: 88-569741-35P designates shell size 8 with a 8-35 insert and pin
contacts in normal position.
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
+ .005 DIA
M
Z
N
+.001
–.005 Thickness
P Max.
Panel
T
AD
Dia.
±.005
KK
Dia.
Max.
Size
16 & 20
Contacts
Shell
Size
L
Max.
R
(TP)
S
±.016
Dia.
±.005
Size 22D
Contacts
Part Number
88/91-569741-XXX
742-XXX
8
10
12
14
16
18
20
22
24
.225
.225
.225
.225
.225
.225
.225
.225
.225
.473
.590
.147
.152
.152
.152
.152
.152
.179
.179
.169
.594
.719
.812
.938
.120
.120
.120
.120
.120
.120
.120
.120
.147
.516
.633
.531
.656
.455 – .403 .466 – .409
.455 – .403 .466 – .409
.455 – .403 .466 – .409
.455 – .403 .466 – .409
.455 – .403 .466 – .409
.455 – .403 .466 – .409
.455 – .403 .466 – .409
.455 – .403 .466 – .409
.455 – .403 .466 – .409
743-XXX
.750
.812
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.802
.828
744-XXX
.875
.906
.927
.953
745-XXX
1.000
1.125
1.250
1.375
1.500
.969
1.052
1.177
1.302
1.427
1.552
1.078
1.203
1.328
1.453
1.578
746-XXX
1.062
1.156
1.250
1.375
747-XXX
748-XXX
749-XXX
All dimensions for reference only.
33
MIL-DTL-38999 Series II Type Connectors
with PCB contacts
JT07R jam nut receptacle
C
M
+ .011
– .010
.094
S
(2 PLACES)
H
.062 MIN.
.109 MAX.
PANEL THICKNESS
Z
PCB TAIL STICKOUT
N
.062 ± .001 DIA. FOR SIZE 16 CONTACTS
.019 ± .001 DIA.
FOR SIZES 20 & 22D CONTACTS
V THREAD
L
T*
RR
THREAD
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
•
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569751-35P designates shell size 8 with a 8-35 insert and pin
contacts in normal position.
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
★
.059 dia. min. 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
“D” shaped mounting hole dimensions
•
•
*
Z
A*
+.000
–.010
H Hex
+.017
–.016
N
+.001
T*
+.010
V Thread
Class 2A
(Plated)
RR Thread
Class 2A
(Plated)
Size
16 & 20
Contacts
Shell
Size
C
Max.
L
M
S
Size 22D
Contacts
Part Number
88/91-569751-XXX
752-XXX
Max. ±.005 –.005 ±.016 –.000
8
10
12
14
16
18
20
22
24
.830 1.390 1.062
.955 1.515 1.188
.453
.453
.453
.453
.453
.453
.422
.422
.422
.438
.438
.438
.438
.438
.438
.464
.464
.464
.473 1.250
.884
.4375-28 UNEF
.8750-20 UNEF .272 – .200 .283 – .178
.590 1.375 1.007
.750 1.500 1.134
.875 1.625 1.259
1.000 1.781 1.384
.5625-24 UNEF 1.0000-20 UNEF .272 – .200 .283 – .178
.6875-24 UNEF 1.1250-18 UNEF .272 – .200 .283 – .178
.8125-20 UNEF 1.2500-18 UNEF .272 – .200 .283 – .178
.9375-20 UNEF 1.3750-18 UNEF .272 – .200 .283 – .178
753-XXX 1.084 1.640 1.312
754-XXX 1.208 1.765 1.438
755-XXX 1.333 1.953 1.562
756-XXX 1.459 2.031 1.688
757-XXX 1.576 2.156 1.812
758-XXX 1.701 2.280 2.000
759-XXX 1.826 2.405 2.125
1.125 1.890 1.507 1.0625-18 UNEF 1.5000-18 UNEF .272 – .200 .283 – .178
1.250 2.016 1.634 1.1875-18 UNEF 1.6250-18 UNEF .272 – .200 .283 – .178
1.375 2.140 1.759 1.3125-18 UNEF 1.7500-18 UNS .272 – .200 .283 – .178
1.500 2.265 1.884 1.4375-18 UNEF 1.8750-16 UN
.272 – .200 .283 – .178
All dimensions for reference only.
34
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP00R wall mounting receptacle
(back panel mounting)
S
LL
M
2 PLACES
1
R
B
2 PLACES
THREAD
L
2
R
AA
2 PLACES
Z
PCB TAIL STICKOUT
.001 DIA.
.062
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZE 20 & 22D CONTACTS
RED
BAND
T
4 PLACES
TT
4 PLACES
M
.005
BLUE
BAND
V THREAD
1.240 MAX.
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
•
Designates true position dimensioning
†
Red band indicates fully mated
Example part number: 88-569761-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
†† Blue band indicates rear release contact
retention system
•
•
Z
B Thread
AA
Class 2A
(Plated)
0.1P-0.3L-TS Max.
M
+.000
–.005
T
V
Max.
Panel
LL
TT
Size
16 & 20
Contacts
Shell
Size
L
S
Max.
+.008
–.006
Thread
Metric
+.006 +.008
Size 22D
Contacts
1
2
Part Number
88/91-569761-XXX
762-XXX
R
R
Thickness –.000 –.006
9
11
13
15
17
19
21
23
25
.6250
.7500
.469
.469
.469
.469
.469
.469
.500
.500
.500
.820
.820
.820
.820
.820
.820
.790
.790
.790
.719
.812
.594
.948
.128
.128
.128
.128
.128
.128
.128
.154
.154
M12X1-6g
M15X1-6g
M18X1-6g
M22X1-6g
M25X1-6g
M28X1-6g
M31X1-6g
M34X1-6g
M37X1-6g
.234
.234
.234
.234
.234
.234
.204
.204
.204
.905
.905
.905
.905
.905
.905
.905
.905
.905
.216
.194
.194
.173
.194
.194
.194
.242
.242
.228–.178
.228–.178
.228–.178
.228–.178
.228–.178
.228–.178
.228–.178
.228–.178
.228–.178
.242–.181
.242–.181
.242–.181
.242–.181
.242–.181
.242–.181
.242–.181
.242–.181
.242–.181
.719 1.043
.812 1.137
.906 1.232
.969 1.323
763-XXX
.8750
.906
764-XXX
1.0000
1.1875
1.2500
1.3750
1.5000
1.6250
.969
765-XXX
1.062
766-XXX
1.156 1.062 1.449
1.250 1.156 1.575
1.375 1.250 1.701
1.500 1.375 1.823
767-XXX
768-XXX
769-XXX
All dimensions for reference only.
35
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP00R wall mounting receptacle
(back panel mounting) (with clinch nuts)
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
S
LL
M
2 PLACES
B
R
THREAD
L
2 PLACES
AA
Z
PCB TAIL STICKOUT
.001 DIA.
.062
FOR SIZE 16 CONTACTS
T
.019 .001 DIA.
FOR SIZE 20 & 22D CONTACTS
RED
BAND
THREAD
CLINCH NUT
BLUE
BAND
M
.005
V THREAD
1.240 MAX.
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-628741-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
•
Designates true position dimensioning
†
Red band indicates fully mated
†† Blue band indicates rear release contact
retention system
•
•
Z
B Thread
AA
Part Number
with
Clinch Nuts
Class 2A
(Plated)
0.1P-0.3L-TS
M
+.000
–.005
V
Max.
Panel
LL
+.006
Size
16 & 20
Shell
Size
L
Max.
S
Max.
T
Thread
Metric
Size 22D
R
Thread
Thickness –.000 Contacts Contacts
9
11
13
15
17
19
21
23
25
88/91-628741-XXX
742-XXX
.6250
.7500
.469
.469
.469
.469
.469
.469
.500
.500
.500
.820
.820
.820
.820
.820
.820
.790
.790
.790
.719
1.094
1.187
1.281
1.344
1.437
1.531
1.625
1.750
1.875
.112-40UNC-3B M12X1-6g
.112-40UNC-3B M15X1-6g
.112-40UNC-3B M18X1-6g
.112-40UNC-3B M22X1-6g
.112-40UNC-3B M25X1-6g
.112-40UNC-3B M28X1-6g
.112-40UNC-3B M31X1-6g
.138-32UNC-3B M34X1-6g
.138-32UNC-3B M37X1-6g
.234
.234
.234
.234
.234
.234
.204
.204
.204
.905
.905
.905
.905
.905
.905
.905
.905
.905
.228–.178 .242–.181
.228–.178 .242–.181
.228–.178 .242–.181
.228–.178 .242–.181
.228–.178 .242–.181
.228–.178 .242–.181
.228–.178 .242–.181
.228–.178 .242–.181
.228–.178 .242–.181
.812
743-XXX
.8750
.906
744-XXX
1.0000
1.1875
1.2500
1.3750
1.5000
1.6250
.969
745-XXX
1.062
1.156
1.250
1.375
1.500
746-XXX
747-XXX
748-XXX
749-XXX
All dimensions for reference only.
* Consult Amphenol for more information on ordering connectors with clinch nuts.
36
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP02R box mounting receptacle
S
2 PLACES
1
L
R
BLUE
BAND
2 PLACES
2
R
ZZ
RED
BAND
2 PLACES
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
Z
B
PCB TAIL STICKOUT
T
AA
M
THREAD
4 PLACES
.005
M
TT
4 PLACES
LL
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
•
Designates true position dimensioning
†
Red band indicates fully mated
Example part number: 88-569771-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
†† Blue band indicates rear release contact
retention system
•
•
Z
B Thread
AA
Class 2A
(Plated)
0.1P-0.3L-TS
M
+.000
–.005
T
Max.
Panel
LL
+.006
TT
+.008
–.006
Size
16 & 20
Contacts
Shell
Size
L
Max.
S
Max.
+.008
Size 22D
Contacts
1
2
Part Number
88/91-569771-XXX
772-XXX
R
R
–.006 Thickness –.000
9
11
13
15
17
19
21
23
25
.6250
.7500
.205
.205
.205
.205
.205
.205
.235
.235
.235
.820
.820
.820
.820
.820
.820
.790
.790
.790
.719
.812
.594
.719
.948
1.043
1.137
1.232
1.323
1.449
1.575
1.701
1.823
.128
.128
.128
.128
.128
.128
.128
.154
.154
.234
.234
.234
.234
.234
.234
.204
.204
.204
.905
.905
.905
.905
.905
.905
.905
.905
.905
.216
.194
.194
.173
.194
.194
.194
.242
.242
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
773-XXX
.8750
.906
.812
774-XXX
1.0000
1.1875
1.2500
1.3750
1.5000
1.6250
.969
.906
775-XXX
1.062
1.156
1.250
1.375
1.500
.969
776-XXX
1.062
1.156
1.250
1.375
777-XXX
778-XXX
779-XXX
All dimensions for reference only.
37
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP02R box mounting receptacle
(with clinch nuts)
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
S
2 PLACES
L
BLUE
BAND
R
2 PLACES
RED
BAND
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
Z
PCB TAIL STICKOUT
B
T
THREAD
AA
M
THREAD
CLINCH NUT
M
.005
.162 – .072
FOR SIZE 16 & 20 CONTACTS
.142 .022
LL
FOR SIZE 22D CONTACTS
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
•
Designates true position dimensioning
†
Red band indicates fully mated
Example part number: 88-628751-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
†† Blue band indicates rear release contact
retention system
•
•
Z
B Thread
AA
Part Number
with
Clinch Nuts
Class 2A
(Plated)
0.1P-0.3L-TS
M
+.000
–.005
Max.
Panel
Thickness
LL
+.006
–.000
Size
16 & 20
Contacts
Shell
Size
L
Max.
S
Max.
T
Size 22D
Contacts
R
Thread
9
11
13
15
17
19
21
23
25
88/91-628751-XXX
752-XXX
.6250
.7500
.205
.205
.205
.205
.205
.205
.235
.235
.235
.820
.820
.820
.820
.820
.820
.790
.790
.790
.719
1.031
1.125
1.172
1.281
1.375
1.469
1.562
1.750
1.875
.112-40UNC-3B
.112-40UNC-3B
.112-40UNC-3B
.112-40UNC-3B
.112-40UNC-3B
.112-40UNC-3B
.112-40UNC-3B
.138-32UNC-3B
.138-32UNC-3B
.234
.234
.234
.234
.234
.234
.204
.204
.204
.905
.905
.905
.905
.905
.905
.905
.905
.905
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.460–.375
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
.471–.399
.812
753-XXX
.8750
.906
754-XXX
1.0000
1.1875
1.2500
1.3750
1.5000
1.6250
.969
755-XXX
1.062
1.156
1.250
1.375
1.500
756-XXX
757-XXX
758-XXX
759-XXX
All dimensions for reference only.
* Consult Amphenol for more information on ordering connectors with clinch nuts.
38
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TV07R jam nut receptacle
.378 MAX.
PANEL THICKNESS
.062 MIN.
.125 MAX.
C
BLUE
BAND
Z PCB TAIL STICKOUT
.062 .001 DIA. FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 & 22D CONTACTS
RED
BAND
B THREAD
V THREAD
H
S
2 PLACES
1.280 MAX.
HOW TO ORDER
•
Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
•
†
Red band indicates fully mated
†† Blue band indicates rear release contact
retention system
★
.059 dia. min. 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
“D” shaped mounting hole dimensions
Example part number: 88-569781-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
*
•
•
Z
A*
+.000
–.000
B Thread
Class 2A (Plated)
0.1P-0.3L-TS
H Hex
+.017
–.016
T
Size
16 & 20
Contacts
Shell
Size
C
Max.
S
±.010
+.010
–.000
V Thread
Metric
Size 22D
Contacts
Part Number
88/91-569781-XXX
782-XXX
9
11
13
15
17
19
21
23
25
.669
.769
.6250
.7500
1.199
1.386
1.511
1.636
1.761
1.949
2.073
2.199
2.323
.875
1.000
1.188
1.312
1.438
1.562
1.688
1.812
2.000
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
2.188
.697
.822
M12X1-6g
M15X1-6g
M18X1-6g
M22X1-6g
M25X1-6g
M28X1-6g
M31X1-6g
M34X1-6g
M37X1-6g
.244 – .200
.244 – .200
.244 – .200
.244 – .200
.244 – .200
.222 – .177
.222 – .177
.222 – .177
.222 – .177
.258 – .206
.258 – .206
.258 – .206
.258 – .206
.258 – .206
.236 – .180
.236 – .180
.236 – .180
.236 – .180
783-XXX
.955
.8750
1.007
1.134
1.259
1.384
1.507
1.634
1.759
784-XXX
1.084
1.208
1.333
1.459
1.575
1.709
1.0000
1.1875
1.2500
1.3750
1.5000
1.6250
785-XXX
786-XXX
787-XXX
788-XXX
789-XXX
All dimensions for reference only.
39
Stand-off Adapter
for use with 38999 PCB connectors
Amphenol’s stand-off adapter and spanner nut assembly allows any MIL-DTL-
38999 jam nut receptacle to support PCB contacts and may eliminate the need
for special stand-off shell design. Consult Amphenol for more information.
Tri-Start MIL-DTL-38999 Jam Nut
Connector with Stand-off Adapter
SPANNER
NUT
R
(TP)
ADAPTER
45
TYP
°
E
J
DIA.
R
(TP)
A
V THREAD
L
C DIA.
B DIA.
4 HOLES
#6-32 UNC-2B
THREAD (PLATED)
+.001
–.001
.250
M
.002
F
HOW TO ORDER
Order by
V Thread
Shell
Size
A
± .003
B Dia.
C
Dia.
J
Dia.
Metric
Plated
Part Number
± .003
1.188
1.375
1.500
1.625
1.750
1.938
2.062
2.188
2.312
E
L
9
XP10-611901-09G
XP10-611901-11G
XP10-611901-13G
XP10-611901-15G
XP10-611901-17G
XP10-611901-19G
XP10-611901-21G
XP10-611901-23G
XP10-611901-25G
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
2.188
.750
.200
.200
.625
.744
.150
.150
M12X1-6H
M15X1-6H
M18X1-6H
M22X1-6H
M25X1-6H
M28X1-6H
M31X1-6H
M34X1-6H
M37X1-6H
11
13
15
17
19
21
23
25
.900
.975
.862
1.125
1.250
1.375
1.469
1.625
1.750
1.019
1.137
1.255
1.373
1.492
1.610
All dimensions for reference only.
40
MIL-C-26482 Series 1 Type Connectors
with PCB contacts
PT02 box mounting receptacle
S
L
4 HOLES
.030 .001 DIA.
FOR SIZE 16 & 20
CONTACTS
.120 .005 DIA.
(.147 .005 DIA. SIZE 24)
M
R
(TP)
R
(TP)
S
A
N
K
Z
PCB TAIL STICKOUT
HOW TO ORDER
•
Order by applicable 71 part number in table below.
71 prefix designates olive drab cadmium plated connector shell.
(For availability of other finishes consult Amphenol, Sidney, NY)
•
Add insert arrangement to end of number. Refer to insert availability chart on
page 4 and pin-out illustrations on pages 4-24. Last letter of part number desig-
nates rotation; P for pins in normal position, S for sockets in normal position. See
page 26 for alternate rotation letter to use.
Example part number: 71-570121-98P designates shell size 8 with a 8-98 insert
and pin contacts in normal position.
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
(MMC) located within .0025 of (TP)
Z
+.040
–.050
A
K
M
N
S
Shell
Size
+.001
–.005
+.021
–.010
L
Max.
+.010
–.000
Dia.
Max.
R
(TP)
+.011
–.010
Size 16 & 20
Contacts
Part Number
71-570120-XXX
71-570121-XXX
71-570122-XXX
71-570123-XXX
71-570124-XXX
71-570125-XXX
71-570126-XXX
71-570127-XXX
71-570128-XXX
71-570129-XXX
6
8
.348
.473
.493
.493
.493
.493
.493
.493
.493
.650
.650
.683
.825
.825
.431
.431
.431
.431
.431
.431
.431
.556
.556
.589
.323
.449
.469
.594
.688
.812
.380
.380
.380
.380
.380
.380
.380
.286
.286
.253
10
12
14
16
18
20
22
24
.590
.825
.573
.719
.938
.750
.825
.699
.812
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.875
.825
.823
.906
1.000
1.125
1.250
1.375
1.500
.825
.949
.969
.825
1.073
1.199
1.323
1.449
1.062
1.156
1.250
1.375
1.076
1.076
1.109
All dimensions for reference only.
41
MIL-C-26482 Series 1 Type Connectors
with PCB contacts
PT07 jam nut receptacle
S
M
H
K
.030 .001 DIA.
FOR SIZE 16 & 20 CONTACTS
J
A
S
R THREAD
P
Z
PCB TAIL STICK OUT
HOW TO ORDER
•
Order by applicable 71 part number in table below.
71 prefix designates olive drab cadmium plated connector shell.
(For availability of other finishes consult Amphenol, Sidney, NY)
•
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 26 for alternate rotation
letter to use.
Example part number: 71-533721-98P designates shell size 8 with a 8-98 insert and pin
contacts in normal position.
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
All lockwire holes are .044 dia. min.
Z
P Panel
Thickness
+.025
–.035
A Dia.
+.001
–.005
H
+.017
–.016
J Flat
+.000
–.010
K
+.011
–.010
R
Shell
Size
M
±.010
Thread
Class 2A
S
±.010
Size 16 & 20
Contacts
Part Number
71-533720-XXX
71-533721-XXX
71-533722-XXX
71-533723-XXX
71-533724-XXX
71-533725-XXX
71-533726-XXX
71-533727-XXX
71-533728-XXX
71-533729-XXX
Min.
Max.
.125
.125
.125
.125
.125
.125
.125
.250
.250
.250
6
8
.348
.473
.625
.750
.405
.530
.125
.125
.125
.125
.125
.125
.125
.156
.156
.156
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.4375-28 UNEF
.5625-24 UNEF
.6875-24 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.6250-18 UNEF
.812
.938
.376
.376
.376
.376
.376
.376
.376
.367
.367
.334
10
12
14
16
18
20
22
24
.590
.875
.655
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
.750
1.062
1.188
1.312
1.438
1.562
1.688
1.816
.818
.875
.942
1.000
1.125
1.250
1.375
1.500
1.066
1.191
1.316
1.441
1.566
All dimensions for reference only.
42
MIL-5015 Type Connectors
with PCB contacts
MS3102R box mounting receptacle
S
A
B
THREAD
R
Z
PCB TAIL STICKOUT
R
S
N
.030 .001 DIA.
FOR SIZE 16 CONTACTS
T
4 HOLES
M
K
L
HOW TO ORDER
•
Order by applicable 10- part number in table below.
10- prefix designates olive drab cadmium plated connector shell.
(For availability of other finishes consult Amphenol, Sidney, NY)
•
Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out
illustrations on pages 4-24. Last letter of part number designates rotation; P for pins in normal
position, S for sockets in normal position. See page 26 for alternate rotation letter to use.
Example part number: 10-602462-3P designates shell size 10SL with a 10SL-3 insert
and pin contacts in normal position.
Reverse Bayonet GT Series connectors
that incorporate 5015 inserts can also be
supplied with printed circuit board contacts.
Consult Amphenol for more information.
•
•
Z dimension is determined by contact type in the insert arrangement.
Most common options are shown; other options are available.
Z
±.045
A
B
K
+.020
–.010
L
M
+.010
–.000
N Dia.
+.010
–.000
T Dia.
+.004
–.002
Shell
Size
Thread
Class 2A
Min. Full
Thread
+.000
–.010
R
±.005
S
±.031
Size 16
Contacts
Part Number
10-602460-XXX
461-XXX
462-XXX
463-XXX
464-XXX
465-XXX
466-XXX
467-XXX
468-XXX
469-XXX
470-XXX
471-XXX
472-XXX
473-XXX
474-XXX
475-XXX
476-XXX
8S
10S
10SL
12S
12
.5000-28 UNEF
.6250-24 NEF
.6250-24 NEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 NEF
1.2500-18 NEF
1.3750-18 NEF
1.5000-18 NEF
1.7500-18 NS
2.0000-18 NS
2.2500-16 UN
2.5000-16 UN
.391
.391
.391
.450
.625
.450
.625
.450
.625
.625
.625
.625
.625
.625
.625
.625
.625
.672
.672
.672
.672
.860
.672
.860
.672
.860
.891
.891
.891
.953
.953
1.031
1.031
1.031
.297
.297
.297
.297
.484
.297
.484
.297
.484
.453
.453
.453
.453
.453
.438
.438
.438
.562
.562
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
.375
.500
.594
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.719
.625
.719
.625
.812
.625
.812
14S
14
.750
.906
.750
.906
16S
16
.875
.969
.875
.969
18
1.000
1.125
1.250
1.375
1.625
1.875
2.062
2.312
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
20
22
24
28
32
36
40
All dimensions for reference only.
43
Universal Header Assemblies
for flex print or PCB connectors
Mounts to all MIL-DTL-38999 and
MIL-C-26482 Connectors
The use of connectors with printed circuit
termination is rapidly gaining popularity due
to the use of high volume, vapor phase or
wave solder manufacturing processes. Ter-
mination of this style of connector to flex
print or a printed circuit board represents a
major cost in the manufacturing process for
users. When adding flex or printed circuit
board assemblies to an expensive filter or fil-
ter/transient protection connector, the total
cost of a failed solder joint, a bent pin, or an
unanticipated electrical failure becomes prohibitive. The univer-
sal header assembly from Amphenol will provide for easy sepa-
ration of the connector from the board on these occasions.
Headers provide easy separation of the
connector from the PC board.
Header Assemblies Provide Cost Savings
Incorporation of the header assembly provides the user with
time and cost saving potentials. These header assemblies can
be vapor phase or wave soldered to flex or printed circuit
boards prior to the receipt of the EMI/EMP connector. Headers
can be installed to standard connectors, allowing for electrical
testing that would adversely affect the sensitive diodes, MOV’s
or capacitors in the EMI/EMP connectors. Expensive connector
assemblies can be easily removed from and reattached to the
header assembly as the manufacturing process dictates.
Cylindrical Configuration
•
•
•
•
•
3 PCB stickout dimensions are available.
Size 22D contacts use .175 thick headers
Size 16 contacts use .195 thick headers
Consult Amphenol for Size 20 contact use with headers.
Headers for cylindrical connectors accommodate up to 128
pins. Consult Amphenol catalogs for mating connector con-
tact layouts (12-092 and 12-090 for MIL-DTL-38999 and
12-070 for MIL-C-26482).
Mounting Applications
Mounting to Rectangular ARINC Connectors
Shell modifications are recommended, but are not necessary.
The header assembly can be attached to connectors with stan-
dard flange placement or directly to the circuit board. The ideal
application would involve either a single flange moved all the
way to the rear of the connector or a double flange. Cinch nuts
can be installed in either flange to allow easier mounting to the
panel or the header assembly. The forward flange would mount
the connector to the panel; the rear flange would be used to
mount the header assembly. Various types of captivated or
loose attaching screws can be utilized for unique applications.
Amphenol universal headers are slotted to allow mounting to all
series of MIL-DTL-38999 or MIL-C-26482 connectors without
special alterations. They are of similar dimension as the flange
of the mounting connector and would be approximately .185
inches (4.70 mm) thick.
•
Headers for ARINC connector arrangements accommo-
date up to 150 pins.
Consult Amphenol for ARINC configurations and detailed
dimensions.
•
Materials
•
Body is molded from Torlon or PPS (Polyphenylene
Sulfide)
Electrical engagement areas of the header contact are
plated with .00003 inches minimum of gold over .00005
inches minimum of nickel.
•
Incorporates a Shorter Pin/Socket Contact
The heart of the header assembly is a short pin/socket contact.
The tall of the contact would accommodate standard through-
hole diameter and thickness of the flex or printed circuit board
materials. The socket is imbedded in the molded material, mak-
ing electrical engagement with the printed circuit tail of the con-
nector.
44
Universal Header Assemblies
for flex print or PCB connectors, cont.
The drawing below shows the standard universal adapter for use with MIL-DTL-38999 and MIL-C-26482
connectors. Consult Amphenol, Sidney, NY for drawings of headers for ARINC configurations.
S
R1
VISUAL
INDICATOR NOTCH
R2
T
G
FOR TOP C OF
L
INSERT PATTERN
(SIZE & CONFIGURATION
OPTIONAL)
SIZE 22
CONTACT VIEW
.020 ± .001
TT
F RADIUS
B
PCB STICKOUT
(SEE SUFFIX CHART BELOW)
T
TT
+.008
–.006
SIZE 16 AND 20
CONTACT VIEW
Assembly
Part Number
Shell
Size
F
G
±.005
S
±.005
+.008
–.006
R1
TP†
R2
TP†
Radius
B
21-904008-XX( )
21-904010-XX( )
21-904012-XX( )
21-904014-XX( )
21-904016-XX( )
21-904018-XX( )
21-904020-XX( )
21-904022-XX( )
21-904024-XX( )
8/9
.094
.094
.094
.125
.125
.125
.125
.125
.125
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
1.812
.128
.128
.128
.128
.128
.128
.128
.154
.154
.719
.812
.594
.719
.216
.194
.194
.173
.194
.194
.194
.242
.242
PCB STICKOUT
(SEE SUFFIX CHART BELOW)
.050
10/11
12/13
14/15
16/17
18/19
20/21
22/23
24/25
.040 ± .001 (SIZE 20)
.0625 ± .0010 (SIZE 16)
.906
.812
.969
.906
1.062
1.156
1.250
1.375
1.500
.969
1.062
1.156
1.250
1.375
G
NOTE:
Size 22 accepts .018 to .022 dia. PCB tails.
Size 16 accepts .048 to .064 dia. PCB tails.
Size 20 accepts .037 to .043 dia. PCB tails.
See Suffix Chart
Assemblies containing Size 22 contact only: .175
Assemblies containing Size 16 or 20 contacts: .195
† TP designates true position dimensioning.
HOW TO ORDER INFORMATION
ASSEMBLY NUMBER SUFFIX CHART
For Universal Adapter used with MIL-DTL-38999 and MIL-C-26482
Connectors
Contact
PCB Stickout**
Arrangement
Use coded number as follows:
Shell Size
Designation*
Number
Suffix***
B ±.015
Stickout
Suffix
21-9040
XX
–
XX
X
08
10
12
14
16
18
20
22
24
1
2
3
.120
Designates Amphenol®
Interface Adapter
Shell size designation for
.185
Insert
Arrangement
Suffix
from
MIL-STD-1560 or
MIL-STD-1669
.270
MIL-DTL-38999 Series I, II, III and IV
or MIL-C-26482 Series 1 and 2.
See suffix chart.
Arrangement number - See MIL-STD-1560
or MIL-STD-1669. Also consult Amphenol
catalogs 12-092 (MIL-DTL-38999 Series III),
12-090 (MIL-DTL-38999 Series I, II), and
12-070 (MIL-C-26482 Series 1)
Contact PCB Stickout designation
See suffix chart.
*
Shell size designation for MIL-DTL-38999 Series I, II, III & IV
and MIL-C-26482 Series 1 and 2.
Examples: Shell size 9 use 08. Shell size 25 use 24.
** Size 22 contacts available in all 3 stickout lengths.
Size 16 and 20 contacts available only in .185 and .270 lengths.
*** Insert arrangement 14-97 and 15-97 are not available at this
time. Consult Amphenol, Sidney, NY for information.
For how to order information on adapters to be used with ARINC connectors,
consult Amphenol Aerospace, Sidney NY.
45
Additional Products for PCB Application
®
Amphenol rectangular interconnects
Amphenol is also a leader in rectangular
interconnects for printed circuit board appli-
cation. Within the rectangular families of
Amphenol interconnects are Low Mating
Force MIL-C-55302 connectors and LRM Sur-
face Mount Connectors.
Variety of Low Mating Force Rectangular Connectors including styles with fiber
optics (right) and small styles with only 10 contacts (upper left).
1
2
3
4
LOW MATING FORCE MIL-C-55302 CONNECTORS
• Superior electrical characteristics - redundant current paths, low
constrictive resistance, stable time/life contact resistance,
uniform current densities
• High performance polyester dielectric moldings
• Over 20,000 mating cycles with B3 Bristle Brush Bunch®
contacts
• Significant reduction in mating force. Only 1.5 ounce max
contact engaging and separating forces
• –65° to +125°C temperature rating
• High circuit count interconnections to 400 contacts per connector
• Two, three and four row patterns, 10 to 100 contacts per row,
in one contact per row increments
• 0.100 in. center to center contact spacing, square grid
• Serviceability - removable crimp contacts, repairable PC
stud and solder less wrap contacts
• Board support structure - reinforcing reduced
• Variety of contact terminations and platings
• Accessories to suit latching, piloting and polarization variations
• Up to 256 keyed mating polarizations
M55302/166 or 167 Mother Board, M55302/170 Daughter Board
1., 2. Two piece PCB connector featuring PCB stud or solderless
wrap contacts in the MB Series and field repairable 90° PCB stud
contacts in the DB Series.
M55302/169 Input/Output
3. Rear release, rear removable crimp contacts for discrete wire
cabling. I/O connector series mates with standard MB and PC recep-
tacle series to provide external inputs/outputs.
M55302/168 PC
4. 90° PCB stud contacts for side mounting on board. Mates with DB
and I/O series.
Hybrid Rectangular Connectors with Brush/Power/Coax/Fiber
Optic Combinations
Amphenol offers wide versatility of combining contact types in rectan-
gular interconnects.
For more information on Low Mating Force Connectors see catalog
12-035 online at www.amphenol-aerospace.com
46
Additional Products for PCB Application
®
Amphenol rectangular interconnects, cont.
LRM SURFACE MOUNT CONNECTORS
The introduction of high speed integrated circuitry such as VHSIC and MMIC
has enabled the Design Engineer to accomplish far more on his printed circuit
board than ever before. This, coupled with the emergence of a revolutionary
change in avionics packaging - modular avionic architectures - has created the
need for a high performance, low insertion force PCB connector with signifi-
cantly increased contact density.
The LRM (Line Replaceable Module) connector series are high performance,
high density interconnects, specifically designed to connect printed circuit
boards. The Amphenol Brush contact technology is the foundation of the LRM
connector series.
LRM Connectors with Staggered Grid
• Advanced design to provide high contact density for high speed integrated
circuitry in SEM-E and custom form factors
• 180 contact insert pattern grid in 8 rows: 0.100 inch spacing along the row
with 0.050 inch between rows, rows offset 0.050 inch.
• Options include various shell designs to accommodate a wide range of PC
board/heat sink combinations
• Solder tail, wire wrap or compliant contact availability
• ESD protection
From top to bottom:
LRM Connectors with GEN-X Grid
Staggered Grid, 2 Bay LRM;
GEN-X Grid, 2 Bay LRM;
LRM inserts with RADSOK contacts;
LRM insert with MT ferrule fiber optics and brush con-
tacts in a Differential Pair insert.
• Higher contact density and improved electrical performance
• All the features of the 180 contact pattern, including ESD protection
• Available in SEM-E and custom form factors
• 236 contact pattern grid in 8 rows: 0.075 inch spacing along the row with
0.060 inch between rows, rows offset 0.0375 inch
LRM Staggered Grid Airflow-thru Connectors
• Available for wider boards up to 0.425 inch. These accommodate standard
brush tails in staggered pattern, but with increased spacing in the center,
and they also provide more airflow cooling of inserts.
LRM Connectors with Many Contact and Shell Design Options
Flexibility to meet customer demands that include: combinations of brush and
fiber optics; options for high speed contacts, RF contacts, or new high amper-
age RADSOK® contacts; incorporation of flex circuits; custom shells with multi-
ple bays.
For more information on LRM Connectors see new catalog 12-037 at website
www.amphenol-aerospace.com.
LRM Module Inserts (showing front and back of inserts)
with PC Tails in Staggered Grid Pattern
BACKPLANE ASSEMBLIES
Amphenol is the leading manufacturer of custom backplane assemblies using
high density, ruggedized, board-to-board backplane interconnects. These can
incorporate brush contacts, pc tail, or press-fit compliant pin contacts, or fiber
optic termini. They also can incorporate fork and blade contacts (see next page
for fork and blade contact connectors).
• Electrical Backplanes - Large panel sizes with high layer counts, and fea-
tures such as high aspect ratio plating, small diameter plated-through holes,
and controlled impedances.
• Optical Backplanes - Fiber termination with Multi-Terminal (MT) optical fer-
rules. Ribbon cable sorting allows programming flexibility; thus rendering the
entire system easily upgradeable.
• Hybrid Optical Backplanes - Integrated electrical and optical systems in one
discreet package for advanced avionics systems.
For more information on Backplane Assemblies from Amphenol Backplane
Systems division, see publication SL-392 at websites:
www.amphenol-abs.com or www.amphenol-aerospace.com.
47
Backplane Assembly with LRM Connectors with Brush
Contacts on one side and Cylindrical Connectors with
Press-fit Compliant Contacts on the other.
®
Amphenol Rectangular Interconnects
additional products for PCB application
UHD MODULE/BACKPLANE CONNECTORS WITH FORK & BLADE
CONTACTS
Amphenol’s wide range of board level interconnects also includes high
density UHD Series module and backplane connectors. These use the
staggered grid pattern but do not use brush contacts. The staggered grid
pattern is 80 contacts per inch, .025 pitch in 8 rows. They are SEM-E for-
mat and are qualified to: EIA 15-763, DESC 89065, IEEE 1101.1 to
1101.9.
The UHD module connectors have surface mount blade contacts and the
mating UHD backplane connectors have solderless press-fit tuning fork
contacts. There are a wide range of high contact density patterns and the
length and style can be tailored to meet customer requirements. They
are rigid pin terminated to the board or flex terminated to the board.
Coax, fiber optics and power contacts can also be integrated into the
connector configuration. Other options include EMI shielding and UHD
interconnects can be provided in a stacking configuration.
UHD Backplane Connectors on Board, Rigid Pin
Termination, with Fiber Optics, Coax or Power Contacts
NAFI SERIES WITH FORK & BLADE CONTACTS
Amphenol NAFI daughtercard and backplane connectors are another
board level interconnect that uses the fork and blade contact termination.
They provide a wide range of medium contact density patterns and meet
MIL-C-28754 standards. Daughtercard termination is through-hole, using
nickel/gold solder plated contacts. The mating interface is a blade con-
tact which can be either parallel or perpendicular to the daughtercard.
They are available with 2, 3, 4 and 5 rows of contacts, .100 x .100 pitch.
They can be rigid pin terminated to the board or flex circuitry can be used
to attach to the board.
Both UHD and NAFI interconnects are used in military and commercial
aviation, in space applications, shipboard and in military vehicles. For
more information see catalog 12-036 at www.amphenol-abs.com or
www.amphenol-aerospace.com.
NAFI Daughtercard Connector with Flex Termination
PRINTED CIRCUIT BOARD TERMINAL BLOCKS
Amphenol Pcd division supplies wire-to-board discrete-wire connections
in a variety of styles.
• Pluggable terminal blocks and headers in 3.5mm/.150” pitches in
straight, angled, with locking ears, 2-tier, 3 tier, and low profile styles.
• Fixed terminal blocks in 5.0mm, .200”, .250”, .375” pitches in standard
profiles, multi-tier, spring-clamp, high current and high voltage styles.
• Edgecard connectors that are screw terminated style in different size
pitches.
• Custom designed terminal blocks with ear mounting options, DIN-rail
mounting options, and others.
WIRING INTERFACE MODULES
Amphenol Pcd also supplies an industrial board level interconnect that
replaces discrete terminations with a single pluggable unit. Connectors
can be D-Sub, ribbon cable, RJ style, Centronic or DIN types. Also
diodes, LEDs, resistors, capacitors, relays or fuses can be included in
the unit.
For more information on terminal blocks and wiring interface modules go
online to www.amphenol-pcd.com.
PCB Circuit Board Terminal Blocks and Wiring Interface Mod-
ules
48
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue, Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157
www.amphenol-aerospace.com
相关型号:
©2020 ICPDF网 联系我们和版权申明