327020 [AMPHENOL]
Circular Connector;PL-500FI SERIES
Plastic Shell Auto-Coupling Connectors
14 pole capacity miniature circular connector
Field Installable
PL-500FI FEATURES
Ideal for front-panel instrumentation and hand-held equipment, the compact
and cost effective PL-500FI Series is designed to meet the efficient packaging
demands of portable electronic devices
Packaging (intuitive, compact, configurable)
• Pulse-Lok® auto-latch / mating confirmation
• Miniature .520” diameter circular shell
• Up to 14 contact positions
Performance (for harsh environments)
• Water proof (IP-67 rated)
• Steam, EtO, & Gamma sterilizable
• Chemical resistant housing
• Up to 5,000 mating cycles (with std.
Contacts)
• Assemble without special tools
• Multiple and proprietary keying options
• Available as an overmolded cable assembly
• Custom configurations available
• Factory overmolded endure elevated
strain and flex conditions
SPECIFICATIONS
Mechanical
Environmental
Electrical (see below)
Mating Cycles: 20K cycles max
Mating Life: 5,000 cycles min.
Contact Resistance: < 10 milliohms*
Retention Force:
• Operating Temp: -40C to +105C
• Mated Connectors: 25 lbs. min.
• Cable to Connector: to 30 lbs. typical
• Backshell to Connector: 50 lbs. min.
• Cable Diameter Range = .115 to .250
• Moisture Resistance: to IP-67 (encapsulated)
• Sterilizable: gamma, EtO & Autoclave
• Chem. Resistance: common operating room
cleaning solvents
Material
Connector Housing: Nylon 12
Flex Reliefs: Thermoplastic Rubber
Contacts: Brass / BeCu,
Plating: Gold over Nickel
* post conditioning
TABLE A:
STANDARD CONTACT CONFIGURATIONS & SPECIFICATIONS
Contact Size
Pin f (mm)
Operating
Operating
Current Max
.9 A
Contact
Number of Poles
Max Wire Gauge
Voltage max
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
Resistance
< 14m ohms
< 14m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 2m ohms
14
10
8
0.5
28
28
22
22
22
22
22
22
22
22
16
Up to 14
contact positions
0.5
1.2 A
1.8 A
2.1 A
2.1 A
2.4 A
2.4 A
3.0 A
3.0 A
3.0 A
7.0 A
0.7
7
0.7
6
0.7
5
0.7
4
0.7
3
0.7
2
0.7
1
0.7
1
1.5
Custom contact inserts are available. Consult factory.
STANDARD HOUSING OPTIONS
In-Line Plug Assembly
In-Line Receptacle Assembly
Panel-Mount Receptacle Assembly
f .52”
f .52”
1.35”
TYP.
1.45”
TYP.
f .625” max
.320 typ
In-Line Plug Kit
In-Line Receptacle Kit
Panel-Mount Receptacle Kit
Rear
Mount
Receptacle
Core
Plug Core
Back Shell
Back Shell
Select this component from Table B
Select this component from Table B
Select this component from Table B
Connector housings are illustrated in blue with gray couplers and backshells. Standard color is black on black. See our online configurator for color
options at: www.amphenolalden.com/connectors-cable-assemblies/configure-connector
* All dimensions shown in inches except where indicated
Phone: 508-427-7000
For additional information about this, or any other Alden product, please
contact an Amphenol Alden Products specialist today.
Fax: 508-583-0164
www.amphenolalden.com
1
© 2012 Amphenol Alden “Pulse-Lok” is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
PL-500FI SERIES
Plastic Shell Auto-Coupling Connectors
14 Pole Capacity Miniature Circular Field Installable Connectors
TABLE B:
STANDARD PART NUMBERS
Number of
Poles
In-Line Receptacle
Panel-Mount Receptacle
In-Line Plug
Solder Cup
327104
327100
327140
327136
327132
327110
327112
327116
327120
327124
327128
Solder Cup
PCB
Solder Cup
327004
327000
327040
327036
327032
327010
327012
327016
327020
327024
327028
14
10
8
7
6
5
4
3
327212
327208
327284
327276
327268
327220
327228
327236
327244
327252
327260
327204
327200
327280
327272
327264
327218
327224
327232
327240
327248
327256
2
1 (.7mm Pin)
1 (1.5mm Pin)
Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Alden connector
configurator located @ www.aldenproducts.com/configurator
Options Include:
Housing Color Options: Black, Gray
Mating Key Options: 2 Standard Keys, Proprietary Keys Available
Panel-Mount Thickness Options: Up to .125 Standard
CONTACT TERMINATION OPTIONS
Termination Options
Receptacles & In-Line Plug
Panel-Mount, Cut-Out Template
Solder Cup (available on all)
PCB (Panel-Mount Receptacle only)
ø .625
Mounting
ø .50
Ring
Footprint
stand off height.050”
pin length .125”
Request sales drawing SD-106999
for PCB mounting templates
.445
Tiered & Canted for ease of assembly
ACCESSORIES
PLUG SOAKING CAP #112058-02
SALES DRAWINGS
Drawing # Connector Type
3272XXA Panel-Mount Receptacle, 10 Pole, PCB
3272XXB Panel-Mount Receptacle, 14 Pole, PCB
3272XXC Panel-Mount Receptacle, 10 Pole, Solder Cup
3272XXD Panel-Mount Receptacle, 14 Pole, Solder Cup
3271XXA Inline Receptacle, 10 Pole, Solder Cup
3271XXB Inline Receptacle, 14 Pole, Solder Cup
3270XXA Inline Plug, 10 Pole, Solder Cup
3270XXB Inline Plug, 14 Pole, Solder Cup
RECEPTACLE DUST COVER #107976
CONNECTOR ASSEMBLY INSTRUCTIONS
Al-PL500FI-01 Panel-Mount Receptacle
Al-PL500FI-02 Inline Receptacle
Al-PL500FI-03 Inline Plug
Available at:
www.amphenolalden.com/connectors-cable-assemblies/configure-connector
Phone: 508-427-7000
Fax: 508-583-0164
www.amphenolalden.com
For additional information about this, or any other Alden product, please
contact an Amphenol Alden Products specialist today.
2
© 2012 Amphenol Alden “Pulse-Lok” is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
相关型号:
©2020 ICPDF网 联系我们和版权申明