315252 [AMPHENOL]
Circular Connector;PL-700RG-N SERIES
Plastic Shell Auto-Coupling Connectors
27 pole capacity disposable receptacle and
support interconnects
PL-700RG-N FEATURES
• Custom configurations available
including passive and active devices
for coding or limiting catheter usage
Specifically designed for electro-surgical
catheter applications, the compact and
cost effective PL-700 Series offers more
features, contacts, and termination
options than the competition.
Performance (for harsh environments)
• Water proof
Packaging (intuitive, compact, configurable)
• Pulse-Lok® auto-latch / quick release
mechanism confirms continuity in critical
surgical applications
• Sterilizable
• Chemical resistant housing
• Up to 5,000 mating cycles (with std.
Contacts)
• 14 standard color combinations
• Proprietary keying protects your single-use
from being copied, or mated with the wrong
connector
• Factory terminated, overmolded
cable assemblies for enhanced flex
and strain relief
SPECIFICATIONS
Electrical (See Table A)
Mating Life: 5,000 cycles min.
Contact Resistance: < 10 milliohms*
Mechanical
Mating Cycles: 20K cycles max
Retention Force (axial):
• Mated Connectors: 50 lbs. Minimum
• Cable to Connector: to 50 lbs. typical
• Backshell to Connector: 50 lbs.
Minimum
Environmental
• Operating Temp: -20C to +85C
• Moisture Resistance: to IP-67
• Sterilizable: steam, gamma & EtO
• Chem. Resistance: common OR cleaning
solvents
• Shelf Life: 3 years (min) Disposable
Connector
* post conditioning
Material
Connector Housing: Thermoplastic
Flex Reliefs: Thermoplastic Rubber
Contacts: Pins = Brass, Sockets = Bronze Alloy
Gold Plate per MIL-G-45204C
Reusable Socket = 30 - 45µ” Gold over 50 – 200µ” Nickel strike
Disposable Pin = 10 - 30µ” Gold over 50 – 200µ” Nickel strike
TABLE A:
STANDARD CONTACT CONFIGURATIONS & SPECIFICATIONS
Up to 27
contact positions
Contact Size
Pin φ (mm)
Operating
Voltage max
Operating
Current Max
Contact
Resistance
Number of Poles
Max Wire Gauge
27
14
0.5
0.7
26
22
300 V RMS
300 V RMS
2.0 A
5.0 A
< 10m ohms
< 10m ohms
Other pole counts available. Consult factory.
STANDARD HOUSING OPTIONS
Disposable Receptacle Assembly
.70 φ
Panel-Mount Receptacle Assembly
In-Line Plug Assembly
.70 φ
2.00
2.25
Panel thickness range = .063 to .250
Shown with optional backshell (See Table C)
Shown with Overmolded Strain Relief
(Refer to PL Series Overmolding Guide)
Note: The disposable receptacle housing is
threaded and may be panel-mounted on a
disposable hand piece or electronic acces-
sory. Mounting hardware is described on
page 3 of this data sheet. A panel-mount
receptacle from Alden’s PL-700SM-N
Series may be preferable for reusable appli-
cations. A typical reusable interconnect
system with integrated PL-700RG & SM
components is illustrated in Panel 3 on
page 2 of this data sheet. Contact an
Alden sales engineer for further details.
In-Line Plug Kit (accepts std. backshell
- Table D - or overmolding)
Disposable Receptacle
.85
.90
Select this component from Table B
Select this component from Table B
Connector housings are illustrated in blue with gray couplers and backshells. Standard color is black on black. See our online configurator for color
options at: www.aldenproducts.com/configurator
* All dimensions shown in inches.
Phone: 508-427-7000
Fax: 508-427-7085
www.aldenproducts.com
For additional information about this, or any other Alden product, please
contact an Alden Products specialist today.
1
1
© 2004 Alden Products Company “Pulse-Lok” is a trademark of Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
PL-700RG-N SERIES
Plastic Shell Auto-Coupling Connectors
27 Pole Capacity Disposable Receptacle and Support Interconnects
TABLE B:
STANDARD PART NUMBERS
Number of
Disposable Receptacle
Panel-Mount Receptacle
In-Line Plug
Poles
Solder Cup
107264-01
107265-01
PCB
Solder Cup
PCB
Solder Cup
PCB
NA
27
14
107376-01
107377-01
315252
315140
See Panel 3
NA
Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Alden connector
configurator located @ www.aldenproducts.com/configurator
Options Include:
Housing Color Options
Mating Key Options
Black, Gray, White, Blue, Red, Green, Yellow
2 Standard Keys, Proprietary Keys Available
Up to .187 Standard
Panel-Mount Thickness Options
CONTACT TERMINATION OPTIONS
Termination Styles
Disposable Receptacle & In-Line Plug
Panel 1
Solder Cup (Plug & Disposable Recep.)
PCB (Disposable Receptacle)
Tiered solder cups
provide easy access
to center positions
Canted cups facilitate
quick and easy wire
positioning
.110
.540
For wires up to 26 AWG
PCB Terminations
Panel-Mount Receptacle
Panel 2
PCB Mounting Template - 27 Pole
Panel-Mount, Cut-Out Template
PCB Mounting Template - 14 Pole
Disposable Receptacle
Request Sales Drawing SD-106487
Request Sales Drawing SD-106486
Panel 3
Typical Single Use Interconnect Configuration
See PL-700SM-N Data Sheet
for console connections
Reusable
Sterilizable Extender Cable
Distal (to catheter or single use device)
PL-700SM-N
Receptacle
PL-700RG-N
Disposable Receptacle
PL-700RG-N
Plug
PL-700SM-N
Plug
Phone: 508-427-7000
Fax: 508-427-7085
www.aldenproducts.com
For additional information about this, or any other Alden product, please
contact an Alden Products specialist today.
2
2
© 2004 Alden Products Company “Pulse-Lok” is a trademark of Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
PL-700RG-N SERIES
Plastic Shell Auto-Coupling Connectors
27 Pole Capacity Disposable Receptacle and Support Interconnects
ACCESSORIES
TABLE C:
DISPOSABLE RECEPTACLE BACKSHELLS
TABLE D:
IN-LINE PLUG BACKSHELLS
Disposable Receptacle Backshell
In-Line Plug Backshell
(cable clamp
capacity)
A
(wire exit i.d.)
A
Standard color is black. Other colors available
to match plug housing (see Panel 3 on page 2)
Dimension A
.085 to .136
.137 to .188
Alden P/N
888600-01
888600-02
1.10
Standard color is black. Gray is optional.
Disposable Receptacle Backshell -
In applications where the disposable receptacle
is attached directly to a cable or catheter this
one piece backshell is available to protect light
gauge wire terminations and provide an anchor
point for the catheter jacket. These backshells
snap into place and may be encapsulated.
In-Line Backshell -
The PL-700 plug housing is designed to accept Alden’s
one piece, Press & SealTM PVC Backshell. This unique-
backshell simply snaps into place providing an IP-67
rated seal to the plug housing and cable exit without hard-
ware resulting in a clean overmolded look. For optimum
sealing we suggest selecting a wire exit i.d. that is at least
.005” smaller than your nominal cable diameter.
Disposable Receptacle Accessories
Part #
Black
Part #
Gray
Accessory
Description
Dimension A
0.053
0.064
0.075
0.086
0.096
0.104
0.120
0.129
0.142
0.153
0.162
0.170
0.186
0.204
0.215
0.225
0.235
0.249
0.264
0.300
300350
300352
300354
300356
300358
300360
300362
300364
300366
300368
300370
300372
300374
300376
300378
300380
300382
300384
300386
300388
300351
300353
300355
300357
300359
300361
300363
300365
300367
300369
300371
300373
300375
300377
300379
300381
300383
300385
300387
300389
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Description
Bulkhead Seal
Hex Mounting Nut
Part Number
106898
102985
Panel-Mount Receptacle Dust Cover
Alden P/N 300390
Standard color is black. Gray optional
Plug Soaking Cap
Alden P/N 300391
Standard color is black. Gray optional
All measurements in inches
Disposable Receptacle
CONNECTOR ASSEMBLY TOOLS
Receptacles
Item
Alden P/N
107026
107027
107028
107030
Description
Application
1
2
3
4
Assembly Tool & Nest Backshell to Housing
Assembly Tool & Nest Quick-ColletTM to Backshell
Receptacle Housing
In-Line Plug
Arbor Press
Solder Fixture
Required for Items 1& 2
Solder Termination
In-Line Plug
Item
Alden P/N
Description
Application
2
1
2
3
107030
107032
107034
Insertion Tool & Nest
Insertion Tool & Nest
Solder Fixture
Backshell to Housing
Plug Core to Housing Assembly
Plug Core Termination
1
1 Plug Core
2 Plug Housing Assembly
Phone: 508-427-7000
Fax: 508-427-7085
www.aldenproducts.com
For additional information about this, or any other Alden product, please
contact an Alden Products specialist today.
3
3
© 2004 Alden Products Company “Pulse-Lok” is a trademark of Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
相关型号:
©2020 ICPDF网 联系我们和版权申明