21-033398-771 [AMPHENOL]
Connector Accessory;
| 型号： | 21-033398-771 |
| 厂家： | 
Amphenol |
| 描述： | Connector Accessory 连接器 连接器支架 |
| 文件： | 总14页 (文件大小：1804K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Quadrax Contacts
MIL-DTL-38999, Series III, General Description
AMPHENOL QUADRAX CONTACTS
Offers several advantages for high data transfer rates, low power consumption,
and excellent EMI compatibility. Four strategically spaced inner contacts form
two 100 or 150 Ohm matched impedance differential pairs. The Outer contact
has a rugged wall section for durability. Available in size 8 crimp termination
style. Also available in size 8 with PC tails (see pages 22-23). Requires
modification of MIL-DTL-38999 connector to accommodate keyed contacts.
CABLE ILLUSTRATION - QUADRAX CONTACT
(4) CENTER
CONDUCTORS
BRAID
JACKET
Quadrax Pin with 8P8C “RJ45” Jack
INSULATION
TYPICAL QUADRAX
TYPICAL QUADRAX
SOCKET CONTACT
Has socket outer
contact with
a socket
inner contact
PIN CONTACT
Has pin outer
contact
with a pin
inner contact
Suggested Numbering for Quadrax Contacts
QUADRAX CONTACTS ARE GOLD
PLATED, CRIMP TERMINATION
Finish of mating contact parts: supplied with
0.000050 min. gold over nickel on
mating interface.
ORIENTATION
KEY
1
1
2
4
2
QUADRAX SIZE 8 CONTACT
PERFORMANCE:
4
3
3
Bandwidth:
Data Rate:
Up to 1.25 GHz
Exceeding 2.5 Gbps.
Voltage Rating: 500 Vrms max. @ sea
level
PIN CONTACT
MATING FACE
SOCKET CONTACT
MATING FACE
Differential Pairs, contacts 1-3, 2-4.
Quadrax differential pairs are 1 and 3, 2 and 4.
Dielectric Withstanding Voltage:
1000 VAC rms between all inner contacts
@ sea level, 500 VAC rms between inner
and outer contacts @ sea level
See page 19 for part number ordering of popularly used 38999 Series III
connectors with 100 ohm quadrax contacts.
GUIDE FOR SELECTING A BACKSHELL:
See required backshell dimensions to avoid
interference between piggyback grommets
used on size 8 cavities and the backshell.
Size
17
A Dia Min
.734
L Min
.540
.540
.540
.540
.540
19
.869
21
.869
23
1.088
1.234
25
SUGGESTED STRAIN RELIEF - INSERT ARRANGEMENTS 9-5 OR 19-18 WITH QUADRAX CONTACTS
Due to the piggyback grommet interference with normal strain reliefs on the shell size 9 only, the recommended strain relief for the
connector is: Amphenol part number TGW-R-5309-10 (OD Cad) or TGF-R-5309-10 (Electroless nickel)
18 Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141
How to Order D38999, Series III Connectors with
Standard 100 Ohm Quadrax Contacts
21-033385-051 Socket
21-033384-051 Pin Contacts*
For all other quadrax contacts or differential twinax contacts, please consult Amphenol Aerospace for part numbers.
1.
2.
3.
4.
5.
6.
Connector Type
Shell Type
Service Class
Shell Size –
Insert Arrangement
Contact Type
Alternate Keying
Position
TVP
00
RQW
21–75
P
B
6. Alternate Keying Position
Locksmith keying–rotation of minor keys. See Series III alternate
positions below “N” not required for normal position.
1. CONNECTOR TYPE
TV
Tri-Start series connector with metal shells
Back panel mounted receptacle with metal shells
Tri-Start series connector with composite shells
TVP
CTV
MAIN
KEYWAY
Tri-Start Alternate
Positions
CTVP Back panel mounted receptacle with composite shells
RECEPTACLE
(front face shown)
AR
BSC
A plug with a given
˚
BR
BSC
rotation letter will mate
with a receptacle with the
same rotation letter. The
angles for a given
˚
2. SHELL STYLE
00
02
Wall mount receptacle
DR
˚
CR
BSC
BSC
˚
MAIN
KEYWAY
Box mount receptacle available only with the PCB tails
and epoxy backfilled (non-removable)
connector are the same
whether it contains pins or
sockets. Inserts are not
rotated in conjunction with
the master key/keyway.
PLUG
(front face shown)
AP
BSC
˚
06
07
Straight plug
BP
BSC
˚
Jam nut receptacle
DP
˚
CP
BSC
˚
BSC
3. SERVICE CLASS WITH QUADRAX
Shell
Size
Key & Keyway
Arrangement
Identification
Letter
AR°
or
AP°
BSC
BR°
or
BP°
BSC
CR°
or
CP°
BSC
DR°
or
DP°
BSC
RQF
Electroless nickel plated
RGQF Electroless nickel plated ground plane
RQW Olive drab cadmium plate
N
A
B
C
D
E
105
140
215
265
RGQW Olive drab cadmium plated ground plane
102
80
35
64
91
132
118
140
155
131
248
230
205
234
197
320
312
275
304
240
RQK
Corrosion resistance stainless steel
9
RGQK Stainless steel ground plane
QDT
Durmalon plated, Nickel-PTFE alternative to cadmium
N
A
B
C
D
E
N
A
B
C
D
E
95
113
90
53
119
51
141
156
145
156
146
141
208
182
195
220
176
184
236
292
252
255
298
242
GQDT Groundplane Durmalon
QDZ
Zinc nickel black conductive
11, 13,
and 15
4. Select a Shell Size and Insert Arrangement
See insert arrangements available with Quadrax contacts on
pages 11-12. Shell size and insert arrangements are together in
one chart. First number represents shell size, second number
is the insert arrangement.
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
17 and 19
N
A
B
C
D
E
N
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
5. CONTACT TYPE
21, 23,
and 25
P
S
Pin contacts
Socket contacts
* The incorporation of Quadrax or Differential Twinax contacts requires a modified
connector to accommodate keyed contacts.
80
135
49
66
62
79
142
170
169
140
145
153
188
188
188
188
188
188
293
310
244
257
280
272
25L, 33,
and 37
Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141 19
Quadrax Contacts
MIL-DTL-38999, Series III*, Contact Part Number Guide by Cable
QUADRAX CONTACTS FOR USE IN TV-R CONNECTORS
Contact Part Number
(Termination Instruction Sheet)**
Pin Socket
21-033384-101† 21-033385-101†
Inner
Impedance Conductor
Electrical
Protocol††
(Ohms)
(AWG)
Cable
USB2 (28433/02171LX-4)
USB2.0 (480 Mbps)
(L-2119-EK)
(L-2119-EK)
90
21-033384-381
(L-2119-EU)
21-033385-381
(L-2119-EU)
24
PIC USB2422
GORE RCN 7688
NF22Q100-01
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
21-033384-061
(L-2119-H)
21-033385-061
(L-2119-H)
Tensolite NF22Q100
Thermax 956-5
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
100
22
Gore RCN8513
JSFY18-3
21-033384-171
(L-2119-BN)
21-033385-171
(L-2119-BN)
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
Tensolite NF22Q100 Special Box pattern, only mates
with 21-0333( )-181
21-033384-181
(L-2119-BP)
21-033384-181
(L-2119-BP)
21-033384-141
(BACC47GM1)
21-033385-141
(BACC45GN1)
S280W502-4/BMS13-72T03C04G024
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
Tensolite NF24Q100-01 (same as 21-03338( )-51, uses 21-033384-161
21-033385-161
(L-2119-BE)
EMI Piggyback)
(L-2119-BE)
ABS0972
ABS1503 KD 24
Draka Fileca F-4703-3
Draka Fileca F-4704-5
F4704-4
Filotex ET 2PC236
Filotex ET 2PF870
PIC Wire E50424
Ethernet, 1000 Base-T
Gigabit Ethernet
21-033384-021
(L-2119-A)
21-033385-021
(L-2119-A)
Tensolite 23450/04090X-4(LD)
24443/03130X-4(LD)
24443/03166X-4(LD)
24443/9P025X-4(LD)
24443/C20714X-4(LD)
24450/0120X-4(LD)
BMS13-72T03C04G024
GORE GSC-01-81869-01
NF24-2Q100
100
24
Ethernet, 1000 Base-T
Gigabit Ethernet
21-033384-051
(L-2119-D)
21-033385-051
(L-2119-D)
NF24Q100-01
NF24Q100-01-200C (Space)
Pic Wire E51424
S280W502-4
Tensolite NF24Q100
Thermax MX100Q-24
Thermax T956-4T200
TYCO CEC-RWC-18664
Serial FPDP
Applications
Tensolite NF24Q100
21-033384-191
(L-2119-BS)
21-033385-191
(L-2119-BS)
(2.5 Gbps)
(Typical app run at 150
Ohms) HDMI 1.3
NF24Q100-01
for 2.5 Gbps applications
ABS1503KD24
F-4703
21-033384-281
(L-2119-DL)
21-033385-281
(L-2119-DL)
Meets EN3155-074
Gore RCN9034
NF24Q100-01
21-033384-391
(L-2119-EY)
21-033385-391
(L-2119-EY)
†
Consult Amphenol Aerospace for current release
of this contact or instruction sheet if applicable.
** Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
20 Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141
Quadrax Contacts
MIL-DTL-38999, Series III*, Contact Part Number Guide by Cable
QUADRAX CONTACTS FOR USE IN TV-R CONNECTORS
Contact Part Number
(Termination Instruction Sheet)**
Inner
Impedance Conductor
Electrical
(Ohms)
100
(AWG)
Protocol††
Cable
Pin
Socket
PIC E51426
Tensolite NF26-2Q100
Tensolite NF26Q100
Tensolite NF26Q100-01
Wirenetics W-3714-379
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
21-033384-071
(L-2119-AB)
21-033385-071
(L-2119-AB)
26
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
Draka Fileca F-4704-6
Gore RCN 8672
21-033384-151
(L-2119-AW)
21-033385-151
(L-2119-AW)
21-033384-291
(L-2119-DR)
21-033385-291
(L-2119-DR)
Cable RCN 8422
Gore RCN 8647
21-033384-301
(L-2119-DR)
21-033385-301
(L-2119-DR)
Gore RCN 8687
Gore RCN8647
21-033384-211
(L-2119-CD)
21-033385-211
(L-2119-CD)
IEEE 1394B Firewire
IEEE 1394B Firewire
Tensolite 24450/03089X-4(LD)
JSFY02-1
110
24
21-033384-221
(L-2119-FF)
21-033385-221
(L-2119-FF)
JSFY18
Gore RCN8487
JSFY18
21-033384-231
(L-2119-CR)
21-033385-231
(L-2119-CR)
IEEE 1394B Firewire
IEEE 1394B Firewire
Tensolite 24450/03089X-4(LD) Same as 21-03338( )-211
but Box pattern, mates with 21-03338( )-241 only
21-033384-241† 21-033385-241†
21-033384-271
(L-2119-CT)
21-033385-271
(L-2119-CT)
Gore RCN7625
Harbour Data Master Q150-24 (19)
Tensolite 24483/02006X-4 (LD)
21-033450-051
(L-2119-DV)
21-033451-051
(L-2119-DV)
24
Tensolite 26473/02006X-4(LD)/Gore RCN8328
(not for new designs, use 21-033450/1 series)
21-033384-031
(L-2119-B)
21-033385-031
(L-2119-B)
Gore RCN8328
Tensolite 26473/02006X-4(LD) Same as 21-033384/
5-31 but box pattern (not for new designs, use
21-033450/1 series) Gore RCN8328
21-033384-201† 21-033385-201†
150
Fibre-Channel
Gore RCN8328
(1 GBPS, 2 GBPS,
1G/2G), 1000 Base-CX
(1.25 GBPS), SCSI-2
(3.2 GBPS)
26
21-033450-001
(L-2119-BW)
21-033451-001
(L-2119-BW)
Tensolite 26473/02006X-4(LD)
Fibre-Channel
Gore RCN8328 (same as 21-033450/1-1 except box
pattern). Mates with 21-033450/1-11 only.
(1 GBPS, 2 GBPS,
1G/2G), 1000 Base-CX
(1.25 GBPS), SCSI-2
(3.2 GBPS)
21-033450-011† 21-033451-011†
(L-2119-CS) (L-2119-CS)
Tensolite 26473/02006X-4(LD)
Daniels crimping tools are available from
Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809
*
Requires modified connector to accommodate keyed contacts.
** Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
†
Consult Amphenol Aerospace for current release of this contact or instruction sheet if applicable.
†† Test reports available for indicated protocols. Consult Amphenol Aerospace.
Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141 21
Quadrax Contacts
MIL-DTL-38999, Series III*, Contact Part Number Guide for PCB Contacts
QUADRAX PCB CONTACTS
QUADRAX PCB CONTACTS
Contact Part Number
Contact Part Number
Impedance
(Ohms)
Impedance
(Ohms)
L Dim
.36
Pretinned
Pin Socket
L Dim
.901
Pretinned
Pin Socket
21-033398-391 21-033397-391
21-033398-491 21-033397-491
21-033398-751 21-033397-751
21-033398-341 21-033397-341
21-033398-381 21-033397-381
21-033398-641 21-033397-641
.418
.914
.428 .015
.494
.928 .015
100
21-033398-231 21-033397-231
21-033398-741 21-033397-741
21-033398-521 21-033397-521
21-033398-661 21-033397-661
21-033398-191 21-033397-191
21-033398-141 21-033397-141
21-033398-761 21-033397-761
21-033398-531 21-033397-531
21-033398-371 21-033397-371
.928 .015
.939
21-033398-671 21-033397-671
21-033398-601 21-033397-601
21-033398-361 21-033397-361
21-033398-591 21-033397-591
21-033398-311 21-033397-311
21-033398-541 21-033397-541
21-033398-481 21-033397-481
21-033398-701 21-033397-701
21-033398-401 21-033397-401
21-033398-021 21-033397-021
21-033398-291 21-033397-291
21-033398-651 21-033397-651
21-033398-421 21-033397-421
21-033398-621 21-033397-621
21-033398-611 21-033397-611
21-033398-711 21-033397-711
.552 .015
.582
.939
100
.580 .015
.605
100/150
.939
.94
.946
.615
.647 .015
.666
.971
.991 .015
1.009
.672
1.035
X
.689 .015
.699
21-033398-721 21-033397-721
21-033398-511 21-033397-511
21-033398-111 21-033397-111
21-033398-581 21-033397-581
21-033398-771 21-033397-771
21-033398-241 21-033397-241
21-033398-271 21-033397-271
21-033398-461 21-033397-461
21-033398-691 21-033397-691
21-033398-221 21-033397-221
21-033398-551 21-033397-551
21-033398-251 21-033397-251
21-033398-731 21-033397-731
21-033398-281 21-033397-281
21-033398-561 21-033397-561
21-033398-631 21-033397-631
100
1.035
100/150
.708
1.035 .015
1.169
.721
.740 .015
.741
1.196 .015
1.366
.741
110
TBD
.761
Daniels crimping tools are available from
Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809
.770 .015
.775
*
Requires modified connector to accommodate keyed contacts.
.788
X
.788
.788 .015
.806
100
.815
.815 .015
.819
.836
.84
21-033398-431 21-033397-431
21-033398-301 21-033397-301
21-033398-091 21-033397-091
21-033398-121 21-033397-121
X
.859
.866
21-033398-031 21-033397-031
21-033398-681 21-033397-681
21-033398-351 21-033397-351
21-033398-501 21-033397-501
21-033398-471 21-033397-471
.866 .015
.871
.875
.889
Indicated length given in chart is the distance
from the rear of the contact retention shoulder
to the tip of the PCB tails.
L DIM. LENGTH
INDICATED IN
TABLE COLUMN
Note: It does not indicate stickout
length when installed in
D38999 connector.
22 Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141
Quadrax Contacts
MIL-DTL-38999, Series III*, Contact Part Number Guide
for PCB Contacts
QUADRAX PCB CONTACTS
SEALING PLUGS
Sealing Plugs for use with D38999
Connectors using Quadrax
Contacts - Size 8 Cavities
Contact Part Number
Impedance
(Ohms)
L Dim
Pretinned
Pin Socket
Part Number
T3-4008-59P
.494
(mates to
21-033450/51
series)
***Standard Plastic
21-033452-051 21-033453-051
Standard Plastic to be used with
PCB tails (shorter tail length)
T3-4008-59P1
.494
.494
21-033398-451 21-033397-451
21-033398-071 21-033397-071
***Metal sealing plug - can be used
when mating with contacts on
mating half
X
21-033899-8Q1
21-033899-8Q2
.582
(mates to
21-033450/51
series)
Metal sealing plug used with PCB’s
and mating contact on mating half
21-033452-061 21-033453-061
.699
.780
.780
.815
.815
21-033398-511 21-033397-511
21-033398-081 21-033397-081
21-033398-131 21-033397-131
21-033398-151 21-033397-151
21-033398-211 21-033397-211
PIGGYBACK GROMMET
X
X
Grommet for use with D38999
using Quadrax Contacts
Part Number
Metallized piggyback grommet
21-033321-023
X
.815
(mates to
21-033450/51
series)
21-033452-021 21-033453-021
150
.815
(mates to
21-033450/51
series)
X
21-033452-031 21-033453-031
21-033398-411 21-033397-411
21-033452-041 21-033453-041
.866
.866
(mates to
21-033450/51
series)
.939
21-033398-591 21-033397-591
21-033452-071 21-033453-071
.939
(mates to
21-033450/51
series)
1.035
(mates to
21-033450/51
series)
21-033452-011 21-033453-011
21-033398-061 21-033397-061
1.035
Daniels crimping tools are available from
Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809
Requires modified connector to accommodate keyed contacts.
*** Must be used with 21-033321-005 piggyback grommet seal.
*
Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141 23
Quadrax Transition Adapters
General Description
AMPHENOL TRANSITION ADAPTERS
Are used to facilitate launching of controlled impedance signals
to printed circuit boards. Amphenol provides transition adapters in
both contact types:
• Quadrax transition adapters, 90° or straight receptacles
threaded or cable to board style
SUGGESTED NUMBERING FOR TRANSITION
ADAPTERS WITH QUADRAX CONTACTS
90° Quadrax Receptacle and Plug Transition Adapter
ORIENTATION
KEY
1
2
4
3
4
3
1
2
TRANSITION ADAPTER
PLUG
MATING FACE
90° RECEPTACLE
TRANSITION ADAPTER
MATING FACE
ELECTRICAL PROTOCOLS FOR
QUADRAX
TRANSITION
ADAPTER
PLUG
QUADRAX TRANSITION ADAPTERS
Part Number
Impedance
(Ohms)
Electrical Protocol††
Plug
Receptacle
Ethernet, Gigabit Ether 21-033836-031
Ethernet, Gigabit Ether 21-033836-041
Ethernet, Gigabit Ether 21-033836-051
Ethernet, Gigabit Ether 21-033836-061
21-033837-101
100
21-033837-081 (90°)
21-033837-091 (straight)
21-033837-041 (90°)
21-033837-051 (straight)
21-033837-061 (90°)
21-033837-141 (90°)
QUADRAX
TRANSITION
ADAPTER
90 DEGREE
RECEPTACLE
Ethernet, Gigabit Ether
1000 Base CX,
Fibre channel
21-033836-021
21-033837-111
21-033837-021 (90°)
150
1000 Base CX,
Fibre channel
21-033837-211 (jam nut)
21-033837-031 (straight)
21-033837-071 (90°)
††Test reports available for indicated protocols; consult Amphenol Aerospace.
24 Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141
Quadrax Transition Adapters
MIL-DTL-38999, Series III, Part Number Guide
100 OHM QUADRAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Part Number
(Termination Instruction Sheet)**
Impedance
(Ohms)
Quadrax Type Adapter/
Cable or PCB Tail Length
Mating Thread
Size
Illustration of Adapter
Plug
Receptacle
Quadrax Plug Adapter/
24443/03130X-4(LD)
24443/9P025X-4(LD)
NF24Q100-01
21-033836-031
(L-2119-U)
S280W502-4
Tensolite NF24Q100
Thermax 956-4TN
Quadrax Plug Adapter/
Draka Fileca F-4704-5
NF22Q100-01
21-033836-041
(L-2119-W)†
Tensolite NF22Q100
Tensolite 24450/030894-4(LD)
Thermax 956-5
Quadrax Plug Adapter/
Draka Fileca F-4703-3, F-4704-4
21-033836-051
(L-2119-Y)
Quadrax Plug Adapter/
NF26Q100
21-033836-061
(L-2119-AM)†
Gore RCN8724 (30 awg)
Gore ACN1042 (28 awg)
Gore RCN8973
21-033836-071
21-033836-101
Draka Fileca F4703-3, F-4704-4
Gore RCB8422
21-033836-121
21-033836-131
21-033836-131
21-033836-141
21-033836-151
100
.375
Gore RCN8422
Gore RCN8982
Draka Fileca F4704-06
Quadrax Plug Adapter/
Hexnut with Lock Wire Holes
Tensolite RCN8467
21-033836-081
21-033836-111
Tensolite NF24Q100-01
Quadrax Receptacle Straight
Adapter in-line jam nut (threaded)/
GSC-10-8273900
21-033837-081
(L-2119-AR)†
Quadrax Receptacle Straight
Adapter in-line jam nut (threaded)/
Tensolite NF24Q100-01
21-033837-261
Quadrax Receptacle Straight
Adapter in-line (threaded)/
NF24Q100
S280W502-4
21-033837-091
(L-2119-BL)
Tensolite 24443/03130X-4 (LD)
Tensolite 24443/9P025X -4 (LD)
Tensolite NF24Q100-01
Thermax 956-4TN
NF26Q100-01
21-033837-341
Daniels crimping tools are available from
Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809
†
Consult Amphenol Aerospace for current release of this adapter & instruction sheet
if applicable. See electrical protocols for transition adapters on page 24
** Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141 25
Quadrax Transition Adapters
MIL-DTL-38999, Series III, Part Number Guide
100 OHM QUADRAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Part Number
(Termination Instruction Sheet)**
Impedance
(Ohms)
Quadrax Type Adapter/
Cable or PCB Tail Length
Mating Thread
Size
Illustration of Adapter
Plug
Receptacle
PCB Quadrax Receptacle
90 Degree Adapter/ Tail
Length .110
21-033837-041
PCB Quadrax Receptacle
90 Degree Adapter/ Tail
Length .200
21-033837-201
21-033837-051
PCB Quadrax Receptacle
Straight Adapter/ Tail
Length .110
.375
PCB Quadrax Receptacle
Straight Adapter/ Special
Tail Length (.200)
21-033837-061
21-033837-131
Straight adapter/ Tail Length
.175
PCB Quadrax Receptacle
Straight Adapter/ Tail
Length .110 except .019”
diameter inner contact tails
21-033837-291
Quadrax Receptacle 90
degree Adapter with cable
to board/ NF24Q100
Tail Length .110
21-033837-141
(L-2119-BB)†
100
Quadrax Receptacle 90
degree Adapter with cable
to board/
ABS1503KD24 Tail Length
.110
21-033837-231
Tensolite NF22Q100-01
Thermax 956-5
Draka Fileca F4704-5
Quadrax Receptacle
Straight Adapter with cable
to board/
NF24Q100, NF24Q100-01
Tail Length .195
21-033837-101
(L-2119-AN)
Quadrax receptacle straight
adapter w/ cable to board/
Tail length .195 Draka Fileca
F-4703-3, F-4703-4
21-033837-241
Daniels crimping tools are available from
Daniels Mfg. Corp. 6103
** Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
Anno Ave., Orlando, FL 32809
†
Consult Amphenol Aerospace for current release of this adapter and instruction sheet if
applicable. See electrical protocols for transition adapters on page 24.
26 Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141
Quadrax Transition Adapters
MIL-DTL-38999, Series III, Part Number Guide
150 OHM QUADRAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Part Number
(Termination Instruction
Sheet)**
Impedance
(Ohms)
Quadrax Type Adapter/
Cable or PCB Tail Length
Mating Thread
Size
Illustration of Adapter
Plug
Receptacle
Quadrax Plug Adapter/
Tensolite 26473/02006X-4(LD), Gore
RCN8328
21-033836-021
(L-2119-S)
PCB Quadrax Receptacle 90 Degree
Adapter/ Tail Length .110
21-033837-021
21-033837-251
150
.375
PCB Receptacle 90 Degree Adapter/
Tail Length .200
PCB Quadrax Receptacle Straight
Adapter/ Tail Length .110
21-033837-031
Quadrax Receptacle Straight
Adapter in-line Jam Nut (threaded)/
Tensolite 26473/02006X-4 (LD), Gore
RCN8328
21-033837-211
(L-2119-BY)
Quadrax Receptacle 90 degree
Adapter with cable to board/
Tensolite 26473/02006X-4
21-033837-071
(L-2119-AI)†
150
Quadrax Receptacle Straight
Adapter with cable to board/
Tensolite 26473/02006X-4 (LD)
21-033837-111
(L-2119-AP)
Daniels crimping tools are available from
Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809
** Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
†
Consult Amphenol Aerospace for current release of this adapter and instruction sheet
if applicable. See electrical protocols for transition adapters on page 24.
Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141 27
Split-Pair Quadrax Contacts & Cables
Features & Benefits/ How to Order
“SPLIT-PAIR” FOR USE WITH CAT6A TYPE CABLE
AMPHENOL AEROSPACE OFFERS THE HIGH PERFORMANCE
INTERCONNECT SOLUTION FOR CAT6A TYPE CABLE.
FEATURES & BENEFITS:
• Overall higher bandwidth than standard CAT5E quadrax - Supports up to
6.5 Gbps per pair
• Enhanced crosstalk performance (compared to standard quadrax) due to
compatibility with shielded twisted pair of cables
• Can be used for a variety of high speed applications beyond
current quadrax design
MIL-DTL-38999 Series III Connectors with
“Split-Pair” Quadrax Contacts for use with
CAT6A Type Cable
• Four strategically spaced inner contacts form two 100 Ohm
matched impedance differential pairs
• Outer contact has rugged wall section for durability
• Available in size 8 crimp termination style
• Also available in size 8 PC tails
• Can be installed into existing quadrax contact connector cavities
• Requires modification of MIL-DTL-38999 connector to accommodate
keyed contacts
“Split-Pair” Quadrax Contacts for use
with CAT6A Type Cable
SUGGESTED NUMBERING FOR
QUADRAX CONTACTS
APPLICATIONS:
For use with, but not limited to, the
following electrical protocols:
• 10/100/1000/10GBASE-T Ethernet
• DVI
SPLIT-PAIR QUADRAX
SOCKET CONTACT
1
1
2
4
• USB 2.0, 3.0
• Serial Rapid IO (up to 3.125 Gbps)
• PCI-Express 2.0
2
4
3
3
• HDMI 1.3a
PIN CONTACT
MATING FACE
SOCKET CONTACT
MATING FACE
• SATA 2.0 (up to 3 GHz)
SPLIT-PAIR QUADRAX
PIN CONTACT
Differential Pairs: 1 & 4, 2 & 3
Patent approved
Cable selection may limit data rate of above protocols
Part Number
Impedance
(Ohm)
Inner
Conductor
Inner Contact
Layout*
Cable Part #
Notes
Pin
Socket
Thermax-1536-224
21-033470-031
21-033470-081
21-033470-131
21-033470-151
21-033470-001
21-033470-061
21-033471-031
21-033471-081
21-033471-131
21-033471-151
21-033471-001
21-033471-061
Thermax-1536-224
Gore RCN9007-24
Gore RCN9007-24
Thermax-1536-224
Space Grade
Space Grade
Box
24
Tensolite
24463/9P025X-2(LD)
**SPECIAL** Only uses one of the
pairs, only supplied with 2 inners
Diamond
Thermax-1536-224
Gore RCN9007-24
Gore RCN9007-24
Thermax-1536-224
Thermax-1536-224
Gore RCN9007-28
Gore RCN9007-28
Gore RCN9007-28
Gore RCN9007-28
Space Grade
21-033470-071
21-033470-091
21-033470-111
21-033470-051
21-033470-021
21-033470-141
21-033470-161
21-033470-101
21-033470-121
21-033471-071
21-033471-091
21-033471-111
21-033471-051
21-033471-021
21-033471-141
21-033471-161
21-033471-101
21-033471-121
100
Space Grade
Box
26
28
Diamond
Box
Space Grade
Space Grade
Diamond
*Note: Default in D38999 style connector is diamond inner contact layout. Box pattern is mainly used in rectangular connectors when mating to 90 degree
PCB tails installed in rectangular connector configuration.
28 Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141
Split-Pair Quadrax Contacts
PCB Contacts & Transition Adapter Contacts
Impedance (Ohm)
Length .015
0.45
PCB Pin Part Numbers
21-033466-121
21-033466-051
21-033466-061
21-033466-191
21-033466-141
21-033466-161
21-033466-131
21-033466-021
21-033466-031*
21-033466-071
21-033466-081
21-033466-181
21-033466-091
21-033466-041
21-033466-111
21-033466-151
21-033466-011
21-033466-101
PCB Socket Part Numbers
21-033467-121
21-033467-051
21-033467-061
21-033467-191
21-033467-141
21-033467-161
21-033467-131
21-033467-021
21-033467-031*
21-033467-071
21-033467-081
21-033467-181
21-033467-061
21-033467-041
21-033467-111
21-033467-151
21-033467-011
21-033467-101
0.494
0.582
0.621
0.741
0.741
0.77
Indicated length given in charts is the
distance from the rear of the contact
retention shoulder to the tip of the
PCB tails.
0.815
0.815
0.815
0.840
0.847
0.847
0.866
0.88
LENGTH
INDICATED IN
TABLE COLUMN
100
Note: it does not indicate stickout length when
installed in D38999 connector.
0.973
1.035
1.208
*Pretinned
100 OHM SPLIT PAIR QUADRAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Part Number
Impedance
(Ohms)
Quadrax Type Adapter/
Cable or PCB Tail Length
Illustration of Adapter
Notes
Plug
Receptacle
Quadrax Plug Adapter/
Thermax 1536-224
21-033468-011
Thermax (24 AWG)-1536-224
Thermax (24 AWG)-1536-195
Gore RCN9007-24
21-033468-021
21-033468-031
With nut flats and lock
wire holes
21-033468-041
21-033468-051
Gore RCN9007-28
Gore RCN9007-24
With nut flats and lock
wire holes
Space Grade with nut
flats and lock wire
holes
21-033468-061
21-033468-071
Gore RCN9007-28
Space Grade with nut
flats and lock wire
holes
PCB Quadrax Receptacle 90 Degree
Adapter/Tail Length .110
21-033469-001
21-033469-081
100
PCB Quadrax Receptacle 90 Degree
Adapter/ Tail Length .250, Standoff .250
PCB Quadrax Receptacle Straight
Adapter/ Tail Length .110
21-033469-011
21-033469-091
21-033469-151
PCB Quadrax Receptacle Straight
Adapter/ Tail Length .160
PCB Quadrax Receptacle Straight
Adapter/ Tail Length .165
Quadrax Receptacle 90 degree Adapter
with cable to board/ Thermax 1536-224
21-033469-021
21-033469-031
Quadrax Receptacle Straight Adapter
with cable to board/ .195 tail length
Thermax 1536-224
Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141 29
Split-Pair Quadrax Contacts
Frequencies & Performance Data
FREQUENCIES OF INTEREST
For use with the following, but not limited
Frequency (GHz)
Insertion Loss (dB)
Return Loss (dB)
35.68
NEXT (dB)
62.36
42.87
43.63
53.68
49.26
43.57
46.02
48.01
37.45
29.9
FEXT (dB)
59.29
62.25
55.22
43.53
48.33
44.12
40.78
47.23
38.12
31.52
29.36
to, electrical protocols:
• 10/100/1000/10GBASE-T Ethernet
• DVI
• USB 2.0
• Serial Rapid IO (up to 3.125 Gbps)
• PCI-Express 2.0
0.1
0.24
0.5
0.625
1
0.09
0.22
0.45
0.57
0.98
1.29
1.47
1.86
2.11
2.42
2.86
36.44
43.66
43.49
17.82
• HDMI 1.3a
• SATA 2.0 (up to 3 GHz)
1.25
1.5
1.7
2
15.1
17.94
12.23
12.9
2.5
3
15.97
16.52
35.94
PERFORMANCE DATA
The following graphs on this page
and the next page provide
performance data on
Insertion Loss
S-Parameters Magnitude
0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
-3.5
-4.0
-4.5
-5.0
-5.5
-6.0
-6.5
S1, 2
Amphenol 10GBASE
signal integrity (SI) quadrax
contacts. Testing was done with
2 mated contacts terminated on
both ends of 1 meter
Thermax cable.
0.1
0.2
0.3
0.4
0.5 0.6 0.7 0.8
1
2
3
4
5
Frequency / GHz
Return Loss
S-Parameters Magnitude
0
-5
S1, 1
-10
-15
-20
-25
-30
-35
-40
-45
-50
0.1
0.2
0.3
0.4
0.5 0.6 0.7 0.8
1
2
3
4
5
Frequency / GHz
30 Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141
Split-Pair Quadrax Contacts
Frequencies & Performance Data
Near-end Crosstalk
S-Parameters Magnitude
-20
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
S1, 3
0.1
0.2
0.3
0.4
0.5 0.6 0.7 0.8
1
2
3
4
5
Frequency / GHz
Far-end Crosstalk
S-Parameters Magnitude
-20
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
S1, 4
0.1
0.2
0.3
0.4
0.5 0.6 0.7 0.8
1
2
3
4
5
Frequency / GHz
2.5 Gps Eye Pattern (PRBS n=15)
P1 Real Part
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
TD Voltage
-0.1
-0.2
-0.3
-0.4
-0.5
0
200
400
600
800
1000
1200
Time / ps
Find Contacts Fast - Online High-Speed Contacts Guide at www.amphenol-aerospace.com • 800-678-0141 31
相关型号：
©2020 ICPDF网 联系我们和版权申明