10-107218-10P [AMPHENOL]
MIL Series Connector,;
| 型号： | 10-107218-10P |
| 厂家： | 
Amphenol |
| 描述： | MIL Series Connector, 连接器 |
| 文件： | 总70页 (文件大小：1149K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
Amphenol QWL Series
Cylindrical Connectors
12-053-4
Amphenol
TABLE OF CONTENTS
Description
Page
Description............................................................... Page
Amphenol® Heavy Duty Cylindrical Connectors
QWL - accessories
10-130380 cable sealing adapter
(with clamp bars) .......................................... 43, 44
QWL Series ......................................................... 2
QWL
QWL - accessories
10-10133X cable sealing adapters ................ 45-48
the environmental connector ............................... 3
QWL
QWL - accessories
10-113637 cable sealing adapter (with woven
strain relief) ....................................................49-52
how to order ..................................................... 4, 5
QWL
10-1070 wall mount receptacle ............................ 6
QWL - accessories
adapter, cable clamp .......................................... 53
QWL
10-1071 cable connecting plug ............................ 7
QWL - accessories
adapter, cable clamp, sealing plugs .............. 54-56
QWL
10-1072 box mount receptacle ............................ 8
QWL - accessories
protection caps ............................................. 57, 58
QWL
10-1073 jam nut receptacle (wall mount) ............. 9
QWL - accessories
flange gasket, grip banding clamp ...................... 59
QWL
10-1074 thru bulkhead receptacle ..................... 10
QWL
QWL
crimp contacts .................................................... 60
10-1076 straight plug ......................................... 11
QWL
QWL
solder contacts ................................................... 61
10-1077 flange mount plug ................................ 12
QWL
QWL
application tools (crimp type) ...............................62
10-1079 jam nut receptacle (box mount) ........... 13
QWL
QWL
insert arrangements
selection guide .............................................. 14-16
thermocouple contacts
and arrangements ......................................... 63-69
Other Heavy Duty Connectors Offered by
Amphenol.............................................................70
QWL
alternate positioning ........................................... 17
Sales Office Listing
QWL
contact insert arrangements ......................... 18-29
QWL
special contact insert arrangements ............. 30-40
For additional information concerning the
Amphenol® QWL Series Cylindrical Connector, or if
there are special application requirements, contact
your local sales office or
QWL - accessories
cabling information ...................................... 41, 42
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Ave.
Sidney, New York 13838-1395
Telephone: 607-563-5011
Fax: 607-563-5351
Amphenol Aerospace operates Quality Systems
that are Certified to ISO-9001 and AS-9100 by third
party Registrars.
www.amphenol-aerospace.com
(Most Amphenol catalogs can be viewed, printed
and down-loaded from the website)
1
Amphenol® Heavy Duty
Cylindrical Connectors
QWL Series
Amphenol® QWL Series Connec-
tors are tailor made for compact,
heavy duty industrial use.
The outstanding performance of this
series makes it well suited for ship-
board installations and ground sup-
port power distribution applications
where physical strength and depend-
ability are key requirements.
The QWL Series are a versatile,
economical alternative to military
qualified designs.
wall mount receptacle
thru bulkhead receptacle
Equivalent MS shell sizes and insert
arrangements offer compatibility with
all standard cable types. MIL-C-22992
environmental connector require-
ments (see page 1) are used as a per-
formance criteria base for this series
to assure reliability under the most
severe conditions.
straight plug
cable connecting plug
The design features of this connec-
tor series provide:
• Exceptional Service
-
high
strength aluminum shells with Alu-
milite 225* hard anodic finish and
shock resistant resilient inserts.
• Foolproof Operation - rugged
double stub coupling threads, left
hand accessory threads and sim-
ple single keyway mating.
box mount receptacle
flange mount plug
• Versatility - both MS and custom
insert patterns available for a wide
variety of multiconductor cables.
A complete line of accessories is
available for use with QWL Series
connectors, including cable sealing
and clamp adapters, protective cov-
ers, flange gaskets and banding
clamps.
jam nut receptacle
(wall mount)
jam nut receptacle
(box mount)
*
Registered trademark of Aluminum
Company of America
2
QWL
the environmental connector
• HIGH CURRENT CAPACITY for power distribution network and inputs to
large equipment
• RUGGED CONSTRUCTION dictated by the working environment, high
strength aluminum shells with Alumilite 225* hard anodic finish, shock resis-
tant resilient inserts, gaskets or “O” rings at appropriate surfaces for perfect
weather tight connections.
• SERVICEABILITY AND FOOL-PROOF OPERATION with fast coupling, easily
maintained double stub threads, left hand accessory threads and single
keyway mating.
• VERSATILITY - both MS and custom insert patterns available to accommo-
date a wide variety of multi conductor cables.
CONDITION
CONFIGURATION
DESCRIPTION
REFERENCE
MIL-STD-1344
THERMAL
SHOCK
UNMATED
Five complete one hour temperature
cycles of –55°C to +125°C
method 1003
test condition
MOISTURE
MATED
Ten complete 24 hour cycles of
+25°C to +65°C temperature at 90%
to 98% humidity
MIL-STD-202
method 106
RESISTANCE
(Cable mounted
connectors)
DURABILITY
MATED
500 complete mating/unmating cycles
MIL-C-22992
SALT SPRAY
(Corrosion)
UNMATED
48 hour exposure to atomized 5%
saline solution at +35°C
MIL-STD-1344
method 1001
VIBRATION
MATED
MATED
10 to 55 Hz, .06 inch total excursion
in 1 minute cycles for 6 hours
55 to 2000 Hz, 10G peak amplitude
sweep
MIL-STD-1344
method 2005
HIGH IMPACT
Nine hammer blows from 1, 3 and
5 feet, three each in three axes
on mounting panel
MIL-STD-202
method 207
FLUID
IMMERSION
UNMATED
MATED
20 hours immersion in hydraulic
fluid and lubricating oil
MIL-C-22992
MIL-C-22992
WATER
IMMERSION
4 hours immersion at 1 atmosphere
pressure differential
*
Registered trademark of Aluminum
Company of America
3
QWL
how to order
®
QWL heavy duty cylindrical connectors are ordered by Amphenol part number only. To
illustrate the ordering procedure, part number 10-107628-5P is shown as follows:
PART NUMBER
10 - 107 6 28-5 P
1
2
3
4
5
See code below:
1. Base Number Prefix - used to define contact type and finish.
10- Solder type contacts, silver plated (Standard)
75- Crimp type contacts, silver plated
81- Crimp type contacts, plated .0001 gold over silver
82- Crimp type contacts for MIL-C-13777 cable, silver plated
83- Crimp type contacts for MIL-C-13777 cable, plated .0001 gold over silver
85- Crimp type contacts plated .00005 gold over silver
2. Base Number - QWL Series Heavy Duty Cylindrical Connector.
3. Shell Style -
0
1
2
3
4
6
7
9
designates wall mount receptacle
designates cable connecting plug
designates box mount receptacle
designates jam nut receptacle with rear accessory threads (wall mount)
designates thru bulkhead receptacle
designates straight plug
designates flange mount plug
designates jam nut receptacle (box mount)
4. Shell Size/Insert Arrangement - Amphenol® QWL connectors are available in equivalent MS shell
sizes with all current MS insert arrangements as well as a large selection of special arrangements for
power and signal circuits. Select the required insert arrangement number from those shown on pages
18-40.
5. Contact Type/Alternate Insert Rotations - P for pin, S for socket. When an alternate position of
the connector insert is required to prevent cross mating of connectors, a different letter (other than P or
S) is used. Select from the table below the Amphenol® letter which indicates both type of contact, and
insert rotation desired. Refer to page 17 for alternate insert rotations.
PIN CONTACTS
SOCKET CONTACTS
®
®
MS
LETTERS
AMPHENOL
LETTER
MS
LETTERS
AMPHENOL
LETTER
P
P (normal)
S
S (normal)
PW
PX
PY
PZ
G
I
K
M
SW
SX
SY
SZ
H
J
L
N
4
QWL
how to order, cont.
ACCESSORIES
Cable Sealing Adapters - these are the basic connector accessories which provide moisture proofing and cable strain
relief. Selection is made on the basis of accessory style, shell size and cable dimensions. To illustrate the ordering proce-
dure, part number 10-101335-361 is shown as follows:
PART NUMBER
10 - 101335
1
-
361
2
See code below:
1. Accessory Base Number - refer to pages 41 through 52 for descriptions and dimensional data.10-101332 designates
short barrel length with woven strain relief grip
10-101333
10-101334
designates short barrel length without strain relief
designates short barrel length with woven strain relief grip and attaching ring for protection cap with bead
chain
10-101335
10-101380
designates short barrel length with attaching ring for protection cap with bead chain
designates short barrel length with attaching ring for protection cap with bead chain and clamp type strain
relief bars
10-113637
designates long barrel length with woven strain relief and attaching ring for protection cap with bead chain
2. Part Number – represents connector shell size and range of cable diameters accommodated by the sealing adapter.
Refer to the page listed below to determine the part number required for the accessory style being used:
Accessory Series
10-10133X
10-130380
Page
46 - 48
44
10-113637
50 - 52
Cable Clamp 10-749XX-( ) and Adapter 10-113196-XX
Connectors which require weatherproofing on open wire cables are provided with a moisture seal by this cable clamp, a
modification of the MS3057B design. A rubber grommet with holes for individual wires is used in place of the sleeve. As the
assembly is tightened, the grommet is compressed around each wire, sealing out moisture.
Order this clamp by the part number listed on page 53 to accommodate the connector being used. Suffix the part number
with the connector insert arrangement number.
To attach the cable clamp to the left hand accessory threads of QWL connectors, Adapter 10-113196-XX is needed. Finish
is non-conductive Alumilite. Order by adapter part number listed on page 53 to accommodate the connector shell size
being used. For a moisture proof seal, unused grommet holes must be filled with the appropriate size sealing plug or seal-
ing rod selected from the table on page 53. Sealing plug or sealing rods must be ordered separately.
M85049/1 Cable Clamp and Adapter 10-113138-XX - order this clamp by the M85049( )C part number listed on page 55
to accommodate the cable type being used. To attach the cable clamp to the left hand accessory threads of QWL connec-
tors, Adapter 10-113138-XX is needed. Order by adapter part number listed on page 55 to accommodate the connector
shell size being used. Standard finish on the clamp is olive drab, cadmium plate. Adapter finish is non-conductive Alumilite.
MS3420-( )A sleeve, to facilitate sealing on smaller diameter cables, must be ordered separately. MS3420-( )A sleeves
may be nested to accommodate smaller cable diameters.
Plug Protection Caps -
10-101046-( )
10-101531-( )
designates plug cover with chain, Alumilite 225 finish
designates plug cover with chain and eyelet end, Alumilite 225 finish
Order these plug covers by the part number listed on page 57 for the appropriate connector shell size.
Receptacle Protection Caps -
10-101063-( )
10-101048-( )
designates receptacle cover with chain, Alumilite 225 finish
designates receptacle cover with chain and eyelet, Alumilite 225 finish
Order these receptacle covers by the part number listed on page 57 for the appropriate connector shell size.
Flange Gasket -
10-36675-( )
10-40450-( )
for operating temperature range –67° to +275°F
for operating temperature range 0° to +257°F
Order by part number listed on page 59 for appropriate connector shell size.
10-183249 Grip Banding Clamp - order this stainless steel clamp by part number listed on page 59 to accommodate
cable diameter being used.
5
QWL
10-1070XX
wall mount receptacle
K
Z
S
R
M
W
A
THREAD
S
R
T
B
V
4 HOLES
LEFT HAND
All dimensions for reference only.
B
Min
Full
T
Dia
+.004
–.003
A
M
+.016
–.000
V
Part
Number*
Shell
Size
Thread
Class 2A
K
.015
R
.005
S
.020
Thread
W
Z
Thread
Class 2A-LH
.500-28UNEF
.625-24UNEF
.625-24UNEF
.750-20UNEF
.750-20UNEF
.875-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18NEF
1.250-18NEF
1.375-18NEF
1.625-18NEF
1.875-16N
.010 Max
.400 .450
.400 .450
.588 .700
.400 .450
.588 .700
.400 .450
.588 .700
.573 .686
.573 .686
.573 .686
.573 .624
.573 .624
.573 .561
.573 .561
.573 .561
.698 .801
10-107010
10-107012
10-107013
10-107014
10-107015
10-107016
10-107017
10-107018
10-107020
10-107022
10-107024
10-107028
10-107032
10-107036
10-107040
10-107044
10S
12S
12
.6250-0.05P-0.1L-DS
.7500-0.1P-0.2L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.1250-0.1P-0.2L-DS
1.2500-0.1P-0.2L-DS
1.3750-0.1P-0.2L-DS
1.5000-0.1P-0.2L-DS
1.7500-0.1P-0.2L-DS
2.0000-0.1P-0.2L-DS
2.2500-0.1P-0.2L-DS
2.5000-0.1P-0.2L-DS
2.7500-0.1P-0.2L-DS
.391
.391
.625
.391
.625
.391
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.704
.704
.891
.704
.891
.704
.891
.906
.906
.906
.968
.968
1.031
1.031
1.031
1.031
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
.875
.719
.812
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
3.000
.150
.150
.150
.150
.150
.150
.150
.177
.177
.177
.177
.177
.209
.209
.209
.209
.812
14S
14
.906
.906
16S
16
.969
.969
18
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
2.375
20
22
24
28
32
36
2.0625-16N
40
2.3125-16N
44
2.625-16UN
*For complete order number see page 4
6
QWL
10-1071XX
cable connecting plug
S
K
Z
M
W
A
Thread
S
V
LEFT HAND
All dimensions for reference only.
A Thread
(plated)
Class 2A
M
+.016
–.000
V
Part
Number*
Shell
Size
K
.015
S
.020
Thread
Class 2A-LH
W
.010
Z
Max
.450
.450
.701
.450
.701
.450
.701
.686
.686
.686
.624
.624
.561
.561
.561
.800
.800
10-107110
10-107112
10-107113
10-107114
10-107115
10-107116
10-107117
10-107118
10-107120
10-107122
10-107124
10-107128
10-107132
10-107136
10-107140
10-107144
10-107148
10S
12S
12
.6250-0.05P-0.1L-DS
.7500-0.1P-0.2L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.1250-0.1P-0.2L-DS
1.2500-0.1P-0.2L-DS
1.3750-0.1P-0.2L-DS
1.5000-0.1P-0.2L-DS
1.7500-0.1P-0.2L-DS
2.0000-0.1P-0.2L-DS
2.2500-0.1P-0.2L-DS
2.5000-0.1P-0.2L-DS
2.7500-0.1P-0.2L-DS
3.0000-0.1P-0.2L-DS
.704
.704
.891
.704
.891
.704
.891
.906
.906
.906
.968
.968
1.031
1.031
1.031
1.031
1.031
.453
.453
.641
.453
.641
.453
.641
.656
.656
.656
.719
.719
.656
.656
.656
.656
.656
.750
.875
.500-28UNEF
.625-24UNEF
.625-24UNEF
.750-20UNEF
.750-20UNEF
.875-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.625-18UNEF
1.875-16UN
.400
.400
.588
.400
.588
.400
.588
.573
.573
.573
.573
.573
.573
.573
.573
.698
.698
.875
14S
14
1.000
1.000
1.094
1.094
1.281
1.375
1.500
1.625
1.875
2.125
2.375
2.625
3.000
3.125
16S
16
18
20
22
24
28
32
36
2.0625-16UNS
2.3125-16UNS
2.625-16UN
40
44
48
2.875-16UN
*For complete order number see page 4
7
QWL
10-1072XX
box mount receptacle
K
Z
S
R
M
W
S
R
Y
T
B
4 HOLES
A
All dimensions for reference only.
A
B
Min
Full
T
Dia
+.004
–.003
Thread
(Plated)
Class 2A
K
+.026
–.010
M
+.016
–.000
W
+.020
–.036
Y
Dia
.010
Part
Number*
Shell
Size
R
.005
S
Z
Max
Thread
.020
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
3.000
3.250
10-107210
10-107212
10-107213
10-107214
10-107215
10-107216
10-107217
10-107218
10-107220
10-107222
10-107224
10-107228
10-107232
10-107236
10-107240
10-107244
10-107248
10S
12S
12
.6250-0.05P-0.1L-DS
.7500-0.1P-0.2L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.1250-0.1P-0.2L-DS
1.2500-0.1P-0.2L-DS
1.3750-0.1P-0.2L-DS
1.5000-0.1P-0.2L-DS
1.7500-0.1P-0.2L-DS
2.0000-0.1P-0.2L-DS
2.2500-0.1P-0.2L-DS
2.5000-0.1P-0.2L-DS
2.7500-0.1P-0.2L-DS
3.0000-0.1P-0.2L-DS
.391
.391
.625
.391
.625
.391
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.703
.703
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
.875
.875
.719
.812
.150
.150
.150
.150
.150
.150
.150
.177
.177
.177
.177
.177
.209
.209
.209
.209
.209
.281
.281
.469
.281
.469
.281
.469
.453
.453
.453
.359
.359
.296
.296
.296
.546
.546
.469
.594
.451
.451
.700
.451
.700
.451
.700
.686
.686
.686
.585
.591
.528
.528
.528
.769
.769
.891
.812
.594
14S
14
.703
.906
.719
.891
.906
.719
16S
16
.703
.969
.844
.891
.969
.844
18
.906
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
2.375
2.625
.969
20
.906
1.125
1.250
1.375
1.594
1.844
2.031
2.281
2.562
2.812
22
.906
24
1.000
1.000
1.063
1.063
1.063
1.063
1.063
28
32
36
40
44
48
*For complete order number see page 4
8
QWL
10-1073XX
jam nut receptacle (wall mount)
S
F
M
N
P
H
Z
A
P
S
V
E
LEFT HAND
B
W
mounting dimensions
K
Dia
Shell
Size
+.005
–.000
G
.003
U
.005
U
.125 .002
DIA. PIN
G
10
.880
1.005
1.130
1.255
1.380
1.505
1.630
1.880
2.130
2.380
2.630
2.880
.518
.562
.625
.688
12, 13
14, 15
16, 17
18
.606
.750
.699
.875
U
G
.739
.938
20
.783
1.000
1.062
1.188
1.312
1.438
1.562
1.703
22
.830
24
.919
28
1.007
1.096
1.183
1.292
32
K
36
40
All dimensions for reference only.
H
Panel
Thickness
F
Hex
.010
V
Part
Number*
Shell
Size
A Thread
Class 2A
B
E Thread
Class 2A
M
.010
N
.015
P
.010
S
.010
Thread
Class 2A-LH
W
Z
.010
.385
.385
.585
.385
.585
Min Max
.010 Max
.344 .295
.344 .232
.516 .483
.344 .232
.516 .483
.344 .232
.516 .483
.516 .467
.516 .467
.516 .467
.516 .404
.516 .404
.516 .404
.516 .404
.516 .404
.703 .593
.703 .593
10-107310
10-107312
10-107313
10-107314
10-107315
10-107316
10-107317
10-107318
10-107320
10-107322
10-107324
10-107328
10-107332
10-107336
10-107340
10-107344
10-107348
10S
12S
12
.6250-0.5-0.1L-DS
.7500-0.1P-0.2L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
.6875-24UNEF
.875-20UNEF
.875-20UNEF
1.000-20UNEF
1.000-20UNEF
1.125-18UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.625-18UNEF
1.875-16UNEF
2.125-16UNEF
2.375-16UN
.875 .094 .227
1.062
.844
.906
.469
.469
.641
.469
.641
.469
.641
.704
.704
.704
.704
.704
.735
.735
.735
.922
.922
.375
.442
.442
.486
.486
.530
.530
.623
.663
.707
.751
.840
.928
1.017
1.104
1.213
1.299
1.062
1.250
1.250
1.376
1.376
1.500
1.500
1.750
1.875
2.000
2.125
2.375
2.625
2.875
3.125
3.406
3.656
.500-28UNEF
.625-24UNEF
.625-24UNEF
.750-20UNEF
.750-20UNEF
.875-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.625-18UNEF
1.875-16UN
.094 .200
.094 .188
.094 .200
.094 .188
.094 .200
.094 .188
.094 .203
.094 .203
.094 .203
.094 .265
.094 .265
.094 .203
.094 .203
.094 .203
.094 .265
.094 .265
1.062
1.250
1.250
1.312
1.312
1.500
1.562
1.750
1.875
2.125
2.375
2.625
2.875
3.125
3.375
1.094
.906
14S
14
1.094
.906
16S 1.0000-0.1P-0.2L-DS .385
16
18
20
22
24
28
32
36
40
44
48
1.0000-0.1P-0.2L-DS .585
1.1250-0.1P-0.2L-DS .585
1.2500-0.1P-0.2L-DS .585
1.3750-0.1P-0.2L-DS .585
1.5000-0.1P-0.2L-DS .585
1.7500-0.1P-0.2L-DS .585
2.0000-0.1P-0.2L-DS .585
2.2500-0.1P-0.2L-DS .585
2.5000-0.1P-0.2L-DS .585
2.7500-0.1P-0.2L-DS .585
3.0000-0.1P-0.2L-DS .585
1.094
1.109
1.109
1.109
1.172
1.172
1.172
1.172
1.172
1.234
1.234
2.0625-16UN
2.3125-16UN
2.625-16UN
2.625-16UN
2.875-16UN
3.125-16UN
2.875-16UN
*For complete order number see page 4.
9
QWL
10-1074XX
thru bulkhead receptacle
L
C
M
M
S
R
G
S
R
A
A
T
B
B
4 HOLES
All dimensions for reference only.
B
Min
Full
G
Max
Bulkhead
Thickness
T
Dia
+.004
–.003
A
M
+.000
–.010
Part
Number*
Shell
Size
Thread
Class 2A
C
Ref
L
.015
R
.005
S
.020
Thread
10-107410
10-107412
10-107413
10-107414
10-107415
10-107416
10-107417
10-107418
10-107420
10-107422
10-107424
10-107428
10-107432
10-107436
10-107440
10-107444
10S
12S
12
.6250-0.05P-0.1L-DS
.7500-0.1P-0.2L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.1250-0.1P-0.2L-DS
1.2500-0.1P-0.2L-DS
1.3750-0.1P-0.2L-DS
1.5000-0.1P-0.2L-DS
1.7500-0.1P-0.2L-DS
2.0000-0.1P-0.2L-DS
2.2500-0.1P-0.2L-DS
2.5000-0.1P-0.2L-DS
2.7500-0.1P-0.2L-DS
.406
.406
.625
.406
.625
.406
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.141
.141
.155
.141
.155
.141
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.266
.266
.312
.266
.312
.266
.312
.312
.312
.312
.312
.312
.312
.312
.312
.438
1.563
1.563
2.125
1.563
2.125
1.563
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.375
.711
.711
.985
.711
.985
.711
.985
.985
.985
.985
.985
.985
.985
.985
.985
1.110
.719
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
3.000
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
.209
.812
.812
14S
14
.906
.906
16S
16
.969
.969
18
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
2.375
20
22
24
28
32
36
40
44
*For complete order number see page 4
10
QWL
10-1076XX
straight plug
Z
J
N
B
Q
D
G
A
V
LEFT
HAND
All dimensions for reference only.
D
Dia
+.010
–.000
Q
Dia
Max
V Thread
(Plated)
Class 2A-LH
Part
Number*
Shell
Size
A Thread
Class 2B
B
.020
G
.030
J
.005
N
.010
Z
Max
10-107610
10-107612
10-107613
10-107614
10-107615
10-107616
10-107617
10-107618
10-107620
10-107622
10-107624
10-107628
10-107632
10-107636
10-107640
10-107644
10-107648
10S
12S
12
.6250-0.05P-0.1L-DS .406
.735
.859
.053
.531
.531
.719
.531
.719
.531
.719
.719
.719
.719
.719
.719
.719
.719
.719
.719
.719
.563
.563
.750
.563
.750
.563
.750
.750
.750
.750
.812
.812
.875
.875
.875
1.000
1.000
.882
1.010
1.010
1.137
1.137
1.264
1.264
1.455
1.551
1.678
1.806
2.060
2.315
2.569
2.824
3.142
3.381
.500-28UNEF
.625-24UNEF
.625-24UNEF
.750-20UNEF
.750-20UNEF
.875-20UNEF
.875-20UNEF
1.000-20UNEF
1.1250-18UNEF
1.2500-18UNEF
1.375-18UNEF
1.625-18UNEF
1.875-16UN
.603
.603
.852
.603
.852
.603
.852
.852
.852
.852
.852
.852
.852
.852
.852
1.103
1.093
.7500-0.1P-0.2L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.1250-0.1P-0.2L-DS
1.2500-0.1P-0.2L-DS
1.3750-0.1P-0.2L-DS
1.5000-0.1P-0.2L-DS
1.7500-0.1P-0.2L-DS
2.0000-0.1P-0.2L-DS
2.2500-0.1P-0.2L-DS
2.5000-0.1P-0.2L-DS
2.7500-0.1P-0.2L-DS
3.0000-0.1P-0.2L-DS
.406
.578
.406
.578
.406
.578
.578
.578
.578
.594
.594
.594
.556†
.556†
.700††
.719
.109
.077
.234
.077
.234
.141
.266
.266
.266
.266
.266
.266
.285**
.285**
.141***
.141
.859
14S
14
.985
.985
16S
16
1.109
1.109
1.235
1.359
1.485
1.609
1.859
2.109
2.359
2.609
2.922
3.172
18
20
22
24
28
32
36
2.0625-16UNS
2.3125-16UNS
2.625-16UN
40
44
48
2.875-16UN
*For complete order number see page 4
**Applicable Tolerance is .033
***Applicable Tolerance is +.030
–.020
†Applicable Tolerance is .026
††Applicable Tolerance is +.013
–.023
11
QWL
10-1077XX
flange mount plug
S
R
Z
J
A
N
S
R
T
4 HOLES
C
All dimensions for reference only.
Part
Number*
Shell
Size
A Thread
Class 2B
C
J
.005
N
.020
R
.005
S
.020
T
Z
Max
.005
.125
.156
.156
.156
.156
.156
.156
.156
.188
.188
.188
.188
.250
.250
.250
.250
.250
Thread
10-107710
10-107712
10-107713
10-107714
10-107715
10-107716
10-107717
10-107718
10-107720
10-107722
10-107724
10-107728
10-107732
10-107736
10-107740
10-107744
10-107748
10S
12S
12
.6250-0.05P-0.1L-DS
.7500-0.1P-0.2L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.1250-0.1P-0.2L-DS
1.2500-0.1P-0.2L-DS
1.3750-0.1P-0.2L-DS
1.5000-0.1P-0.2L-DS
1.7500-0.1P-0.2L-DS
2.0000-0.1P-0.2L-DS
2.2500-0.1P-0.2L-DS
2.5000-0.1P-0.2L-DS
2.7500-0.1P-0.2L-DS
3.0000-0.1P-0.2L-DS
.531
.531
.719
.531
.719
.531
.719
.719
.719
.719
.719
.719
.719
.719
.719
.719
.719
.438
.438
.688
.438
.688
.438
.688
.688
.688
.688
.688
.688
.781
.781
.781
1.000
1.000
.562
.812
.781
1.062
1.062
1.062
1.062
1.312
1.312
1.312
1.625
1.625
2.000
2.000
2.500
2.500
3.031
3.031
3.250
4-40 NC
4-40 NC
4-40 NC
4-40 NC
4-40 NC
6-32 NC
6-32 NC
6-32 NC
10-32 NF
10-32 NF
10-32 NF
10-32 NF
10-32 NF
10-32 NF
10-32 NF
10-32 NF
10-32 NF
.602
.602
.852
.602
.852
.602
.852
.852
.852
.852
.852
.852
.852
.852
.852
.852
.852
.812
14S
14
.812
.812
16S
16
1.000
1.000
1.000
1.250
1.250
1.562
1.562
1.812
1.812
2.250
2.375
2.562
18
20
22
24
28
32
36
40
44
48
*For complete order number see page 4
12
QWL
10-1079XX
jam nut receptacle (box mount)
M
S
F
Z
C
H
P
A
P
S
E
B
K Dia
+.005
–.000
mounting dimensions
Shell
Size
G
.003
U
.005
10
12, 13
14, 15
16, 17
18
.693
.880
.451
.531
.625
U
.518
.125 .002
DIA. PIN
G
1.005
1.130
1.255
1.380
1.505
1.630
1.880
2.130
2.380
2.630
2.880
3.130
.562
.688
.606
.750
.699
.875
20
.739
.938
U
G
22
.783
1.000
1.062
1.188
1.312
1.438
1.562
1.703
1.828
24
.830
28
.919
32
1.007
1.096
1.183
1.292
1.378
36
K
40
44
48
All dimensions for reference only.
H
E Thread
Class 2A
(Plated)
F
Hex
.016
Panel Thickness
Part
Number*
Shell
Size
A Thread
Class 2A
B
C
M
.010
P
S
Z
Max
.010 .005
Min
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
Max
.227
.200
.282
.200
.282
.200
.282
.250
.250
.250
.312
.312
.282
.282
.282
.422
.422
.010
.375
.442
.442
.486
.486
.530
.530
.623
.663
.707
.751
.840
.928
1.017
1.104
1.213
1.299
.010
1.062
1.250
1.250
1.376
1.376
1.500
1.500
1.750
1.875
2.000
2.125
2.375
2.625
2.875
3.125
3.406
3.656
10-107910
10-107912
10-107913
10-107914
10-107915
10-107916
10-107917
10-107918
10-107920
10-107922
10-107924
10-107928
10-107932
10-107936
10-107940
10-107944
10-107948
10S
12S
12
.6250-0.05P-0.1L-DS .385 .125
.6875-24NEF
.875-20UNEF
.875-20UNEF
1.000-20UNEF
1.000-20UNEF
1.125-18NEF
1.125-18NEF
1.250-18NEF
1.375-18NEF
1.500-18NEF
1.625-18NEF
1.875-16UN
2.125-16UN
2.375-16UN
2.625-16UN
2.875-16UN
3.125-16UN
.875
1.062
1.062
1.250
1.250
1.312
1.312
1.500
1.562
1.750
1.875
2.125
2.375
2.625
2.875
3.125
3.375
.844
.906
.295
.232
.389
.232
.389
.232
.389
.420
.420
.420
.357
.357
.326
.326
.326
.436
.436
.7500-0.1P-0.2L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.1250-0.1P-0.2L-DS
1.2500-0.1P-0.2L-DS
1.3750-0.1P-0.2L-DS
1.5000-0.1P-0.2L-DS
1.7500-0.1P-0.2L-DS
2.0000-0.1P-0.2L-DS
2.2500-0.1P-0.2L-DS
2.5000-0.1P-0.2L-DS
2.7500-0.1P-0.2L-DS
3.0000-0.1P-0.2L-DS
.385 .125
.585 .125
.385 .125
.585 .125
.385 .125
.585 .125
.585 .188
.585 .188
.585 .188
.585 .188
.585 .188
.585 .219
.585 .219
.585 .219
.585 .219
.585 .219
1.188
.906
14S
14
1.188
.906
16S
16
1.188
1.156
1.156
1.156
1.219
1.219
1.250
1.250
1.250
1.390
1.390
18
20
22
24
28
32
36
40
44
48
*For complete order number see page 4.
13
QWL
insert arrangements - selection guide
Contact Size
Contact Size
Insert
Arrangement
Service
Rating
Total
Contacts
Insert
Arrangement
Service
Rating
Total
Contacts
0
4
8
12
16
1
0
4
8
12
16
10S-2
12S-3
12S-4
12-5
A
A
1
2
1
1
3
4
1
5
6
3
2
4
3
1
7
1
2
3
3
5
1
3
4
3
2
1
2
10
2
4
3
1
1
8
7
4
5
6
4
2
4
1
7
10
5
3
10
5
5
5
20-2
D
D
1
3
1
2
20-3
3
4
D
1
20-4
D
4
D
1
20-6
D
3
3
8
14S-1
14S-2
14S-4
14S-5
14S-6
14S-7
14S-9
14S-10
14S-12
14-3
A
3
4
1
5
6
3
2
4
3
20-7
D/A
Inst.
D/A
Inst.
A
8
Inst.
D
20-8
6
2
2
4
20-9
8
1
7
Inst.
Inst.
A
20-11
20-12
20-14
20-15
20-16
20-17
20-18
20-19
20-20
20-21
20-22
20-23
20-24
20-25
20-27
20-29
20-30
20-33
22-1
13
2
13
1
1
A
5
3
7
2
5
3
A
A
7
Inst.
A
A
9
7
1
6
A
6
A
1
A
9
16S-1
16S-3
16S-4
16S-5
16S-6
16S-8
16-2
A
7
1
2
3
3
5
A
3
3
B
A
4
1
3
1
D
A
9
8
3
A
A
6
3
2
2
A
A
2
A
A
4
2
E
1
Inst.
A
13
14
17
13
11
2
13
14
17
13
11
16-7
A
1
2
2
16-9
A
2
3
2
A
16-10
16-11
16-12
16-13
18-1
A
Inst.
A
A
A
1
1
D
2
3
2
A
2
2
2
22-2
D
3
A/Inst.
D
10
22-4
A
4
2
2
18-3
22-5
D
6
4
1
18-4
D
4
1
22-6
D
3
2
18-5
D
22-7
E
1
1
18-6
D
22-8
E
2
2
3
18-7
B
1
1
22-9
E
3
18-8
A
1
2
4
5
7
5
22-10
22-11
22-12
22-13
22-14
22-15
22-16
22-17
22-18
22-19
22-20
22-21
22-22
22-23
22-24
22-27
22-28
E
4
4
2
18-9
Inst.
A
B
2
18-10
18-11
18-12
18-13
18-14
18-15
18-16
18-17
18-19
18-20
18-22
18-24
18-29
18-30
18-31
D
5
2
3
A
D/A
A
5
4
1
A
6
1
19
6
19
1
A
3
E/A
A
5
3
1
A
1
9
6
A
4
1
2
D/A
D/A
A
9
8
C
8
8
Inst.
A
5
10
5
14
9
14
9
A
A
A
3
1
2
D
3
A
4
4
1
A/Inst.
A
10
5
D/A
D/A
D/A
A
8
8
2
6
4
8
A
5
9
A
5
7
7
14
QWL
insert arrangements, cont.
Contact Size
Contact Size
Insert
Arrangement
Service
Rating
Total
Contacts
Insert
Arrangement
Service
Rating
Total
Contacts
0
4
8
12
16
7
0
4
8
12
16
22-33
22-34
22-36
24-2
D/A
7
5
32-1
E/D
5
2
3
D
3
8
7
2
2
32-2
E
5
3
2
2
4
D/A
8
32-3
D
9
1
2
2
2
D
7
32-4
A/D
14
2
12
24-3
D
7
5
32-5
D
24-5
A
16
8
16
32-6
A
23
35
30
14
7
2
3
2
3
2
7
6
16
28
24
12
3
24-6
D/A
8
2
32-7
Inst./A
24-7
A
16
2
14
32-8
A
D
24-9
A
2
2
32-9
2
2
24-10
24-11
24-12
24-16
24-17
24-20
24-21
24-22
24-27
24-28
28-1
A
7
7
3
32-10
32-12
32-13
32-15
32-16
32-17
32-22
36-1
E/B/D/A
A/D
D
A
9
6
3
3
2
2
15
23
8
5
5
6
2
10
18
A
5
D/A
7
1
3
3
9
9
D
2
D
5
A
23
4
2
4
16
D
11
10
4
D
D
1
4
A
54
22
6
54
18
D
D
4
3
E
7
7
36-3
D
3
3
4
2
Inst.
24
9
24
36-4
D/A
A
3
D/A
3
3
6
2
36-5
4
28-2
D
14
3
12
36-6
A
6
4
1
28-3
E
36-7
A
47
47
31
48
48
48
17
16
35
47
47
31
34
52
30
47
85
85
7
1
40
46
14
48
48
48
15
6
28-4
E/D
9
2
1
7
2
36-8
A
28-5
D
5
2
3
2
36-9
A
2
5
14
28-6
D
3
36-10
36-11
36-12
36-13
36-14
36-15
36-16
36-17
36-18
36-20
36-52
40-1
A
28-7
D
2
A
28-8
E/D/A
12
12
7
2
6
3
4
10
6
A
28-9
D
E/A
D
2
5
28-10
28-11
28-12
28-13
28-15
28-16
28-17
28-18
28-19
28-20
28-21
28-22
D/A
2
2
A
22
26
26
35
20
15
12
10
14
37
6
18
26
26
35
20
15
12
6
D/A
A
35
40
40
14
30
52
24
24
85
85
A
7
7
A
A
A
A
1
2
2
14
2
A
A
B/D/A
A
C/D/A/Inst.
D
6
B/D/A
4
40-9
A
1
22
A
A
D
10
4
40-56
48-62
A
37
3
D
3
15
QWL
special insert arrangements
Contact Size
Contact Size
Insert
Total
Insert
Total
Coax**
Coax**
Arrange Service Con-
Arrange Service Con-
ment
14S-A7
16-59
20-26
20-51
20-57
20-58
20-59
20-66
20-79
22-63
22-65
22-70
22-80
24-19
24-51
24-52
24-53
24-58
24-59
24-60
24-65
24-66
24-67
24-71
24-75
24-79
24-80
24-84
24-96
24-AJ
28-51
28-59
28-66
28-72
28-74
28-75
28-79
28-82
28-84
28-AY
32-25
32-31
32-48
32-52
32-53
32-56
32-57
32-58
32-60
32-62
32-64
32-68
32-73
32-75
32-76
32-79
32-82
Rating
A
A
tacts 4/0 2/0
7
4
0
4
8
12 16
0
4
8
12
ment
32-AF
36-51
36-54
36-55
36-59
36-60
36-64
36-65
36-71
36-73
36-74
36-75
36-76
36-77
36-78
36-79
36-80
36-83
36-85
36-97
36-AF
40-5
Rating
A
tacts 4/0 2/0
55
4
0
4
8
12 16
0
4
8
12
7
55
4
D
2
2
A
19
3
19
A
39
39
53
47
4
8
31
31
A
3
A
8*
A
7
7*
A
3* 50
7* 40
A
10
3
5
5
A
A
3*
Coax
Coax
A
4
4
A
6
5*
1
1
7
8
4
A/D
A
8
53
7
3
50
12
8
4
Coax
A
7
A/D
A
8*
8
44
48
47
7
43
48*
47
1
13
3
5
A
A
3*
5
A
A
12
5
12
D
7
A
A
14
20
20
7
12
2
Hi Volt.
A
1
1
A
20
5
5
3
A
20*
A
13
14
7
3
7
7
7
Coax
A/D
C
7
A
35
35*
48
16
60
A
7*
1
48
5
1
A
15
7
11
7
4
A
D
A
5
4
Inst.
A
19
7
19
40-10
40-35
40-53
40-57
40-61
40-62
40-63
40-64
40-66
40-67
40-68
40-70
40-72
40-73
40-74
40-75
40-80
40-81
40-82
40-85
40-86
40-87
40-AD
40-AG
40-AP
40-AR
40-AS
40-AT
40-AU
40-AV
44-52
44-53
48-51
48-52
48-53
48-54
48-55
48-57
48-60
A
29
35
60
4
4
9
1
7*
7*
5
D
35
3
A
7
A
A
5
E
Inst.
A
23
19
28
25
12
17
16
3
23
A
59
60
61
36
4
55
60
1
18
A
Inst.
A
28
25
A
61*
20
Coax
Coax
A
3
13
A
12
7
4
4
4
A
10
11
21
61
11
61
6
1
10
A
2
14
A
21
Coax
A
3
A
61
1
16
16
16
6
7*
7*
7
9
9
9
A
10
1
A
A
61
A
A
1
1
D
2
4
E
5
4
A
9
9
A
11
62
62
60
4
10
7
1
A
9
4
5
A
62*
62
A
25
31
48
8
25
A
A
31
48
A
60*
Inst.
D
E
2
6
5
D
7
Inst./E
A
42
30
8
37
A
8
4
3
4
6* 24
6
A
38
2
38
7
Coax
Coax
A
2
E
2
4
4
4
Inst.
A
13
40
43
14
3
3
3
23
23
54
16
46
9
15
8
2
25 15
24 18
1
Coax
Inst.
A
2
1
1
2
16
54
12
46
A
1
A
10
D
3
A
A
104
36
56
61
37
56
78
56
56
104
18
Coax
A
2
7
A
18
19
5
19
A
10
42
4
5
D
4
4
A
56
A
16
12
D
37
A
10
2
42
4
4
* Crimp contacts accommodate wire the same size as the contact as well as wire of
the next smaller, even size. Arrangements identified with an asterisk (*) are excep-
tions. See insert arrangement drawings on pages 18-40 for application wire size.
**Coaxial cable data can be found on insert arrangement drawings, pages 38-48. For
further information on coaxial contacts and cable see catalog 12-130.
A
6
2
68
42
42
A
4
10
10
A
Consult Sidney, NY for alternate rotations not covered on page 17.
16
QWL
alternate positioning
To avoid cross-plugging problems in applications requir-
ing the use of more than one connector of the same
size and arrangement, alternate rotations are available
as indicated in the accompanying charts.
The following insert arrangements have the same alter-
nate insert rotations for W, X, Y and Z, which are:
Degrees
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction
from the normal shell key. The socket insert would be
rotated counter-clockwise the same number of degrees
in respect to the normal shell key.
W
X
Y
Z
80
110
250
280
16-7
20-22
22-6
22-29
22-33
22-34
24-1
24-17
24-20
24-21
24-28
28-1
28-16
28-17
28-19
28-20
28-21
32-1
32-13
32-22
32-AF
36-1
18-5
18-9
22-12
22-14
22-15
22-16
22-17
22-18
22-19
22-21
22-24
22-25
18-13
18-14
20-7
24-3
36-7
24-4
28-4
36-8
20-8
24-5
28-8
32-3
36-13
40-AR
40-AS
40-AT
40-AU
20-9
24-6
28-9
32-4
20-12
20-14
20-16
20-20
24-7
28-10
28-11
28-14
28-15
32-6
Position W
Position X
Position Y
Position Z
24-12
24-14
24-16
32-9
32-10
32-12
View looking into front face of pin insert or rear of socket insert.
Degrees
Degrees
Degrees
Insert
Arrangement
Insert
Arrangement
Insert
Arrangement
W
63
70
–
X
Y
Z
–
W
35
90
35
35
35
35
80
35
70
35
35
35
70
35
35
35
35
–
X
Y
Z
W
35
90
70
70
45
70
35
80
80
35
45
60
80
80
30
30
70
70
–
X
Y
Z
10SL-4
12S-3
14S-2
14S-5
14S-7
14S-9
16-9
–
–
20-18
20-19
20-21
20-23
20-24
20-27
20-29
22-1
110
180
110
110
110
110
–
250
270
250
250
250
250
–
325
28-7
110
180
145
145
110
145
110
125
125
110
110
120
–
250
270
215
215
250
215
250
235
235
250
250
–
325
–
145
120
110
180
145
110
180
110
110
–
215
240
–
290
–
–
28-12
28-18
28-22
28-AY
32-2
325
325
325
325
280
325
290
325
325
325
290
325
325
325
325
–
290
290
–
–
–
90
70
35
90
35
35
80
35
70
90
–
270
215
250
270
250
250
–
–
290
325
–
290
325
280
280
280
–
32-5
16-10
16-11
16-13
16S-1
16S-4
16S-5
16S-6
16S-8
18-1
110
145
110
110
110
145
110
110
110
110
110
–
250
215
250
250
250
215
250
250
250
250
250
250
250
–
32-7
325
325
280
325
290
–
22-2
32-8
22-4
32-15
32-17
32-25
32-48
32-64
32-68
32-82
36-3
22-5
110
145
180
170
145
110
110
–
250
215
270
265
215
250
250
–
22-8
–
22-9
–
–
22-10
22-11
22-13
22-20
22-22
22-23
22-27
22-28
22-63
24-2
100
–
110
–
250
–
–
70
35
35
70
–
290
325
325
290
–
–
–
–
18-3
145
145
120
110
125
125
180
125
–
215
215
240
250
235
235
270
245
–
290
290
–
18-4
36-4
18-8
35
80
80
20
80
35
80
35
45
80
35
70
35
70
–
36-5
18-10
18-11
18-12
18-15
18-20
18-22
18-29
20-3
120
170
–
240
265
–
–
280
280
–
36-6
35
80
80
90
60
65
65
33
65
65
70
45
37
35
90
325
280
280
–
–
–
–
36-9
80
–
280
–
–
–
36-10
36-14
36-15
36-AF
40-1
120
180
145
180
145
110
110
145
–
240
270
215
270
215
250
250
215
–
–
–
280
325
280
325
–
90
70
90
70
45
35
70
80
90
–
24-9
110
–
250
–
305
–
290
–
24-10
24-11
24-22
24-27
28-2
110
110
–
250
250
–
130
–
235
–
300
270
310
310
290
–
290
–
40-5
20-4
280
325
290
325
290
40-9
125
125
130
–
225
225
230
–
20-5
325
290
280
–
110
145
110
145
250
215
250
215
40-10
40-35
40-AD
40-AG
40-AP
40-AV
20-6
28-3
20-15
20-17
28-5
180
270
28-6
74
285
250
270
322
325
–
110
180
17
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
B
A
D
C
A
B
A
C
B
Insert Arrangement
Service Rating
10S-2
12S-3
12S-4
12-5
D
14S-1
14S-2
Inst.
4
A
1
A
2
A
1
A
3
Number of Contacts
Contact Size
1
16
16
16
12
16
16
100˚
A
F
A
E
B
A
D
A
B
B
A
C
E
B
C
D
B
C
D
C
100° Rotation
of 14S-2
Insert Arrangement
Service Rating
14S-4
14S-5
Inst.
5
14S-6
Inst.
6
14S-7
14S-9
14S-10
Inst.
4
D
1
A
3
A
2
Number of Contacts
Contact Size
16
16
16
16
16
16
A
100˚
F
A
C
E
G
A
C
B
B
A
B
C
B
D
100° Rotation
of 14S-7
Insert Arrangement
Service Rating
14S-12
14-3
A
16S-1
16S-3
16S-4
16S-5
A
3
A
7
B
1
D
2
A
3
Number of Contacts
Contact Size
1
16
8
16
16
16
16
E
A
B
A
C
A
C
D
C
A
D
B
C
B
B
Insert Arrangement
Service Rating
16S-6
16S-8
16-2
E
16-7
A
16-9
A
A
3
A
5
Number of Contacts
Contact Size
1
1
8
2
2
2
16
16
12
16
12 16
CONTACT LEGEND
16
12
8
4
0
18
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
H
A
D
A
C
A
G
B
B
A
I
B
F
J
B
A
C
B
E
Insert Arrangement
Service Rating
16-10
A
16-11
A
16-12
16-13
A
18-1
18-3
D
A
1
4
B, C, F, G = A; Bal. = Inst.
Number of Contacts
Contact Size
3
2
2*
10
16
2
12
12
12
12
G
F
C
F
A
A
D
C
A
E
B
G
H
E
B
B
C
B
D
A
C
D
Insert Arrangement
Service Rating
18-4
D
18-5
D
18-6
18-7
B
18-8
18-9
Inst.
D
1
4
A
Number of Contacts
Contact Size
4
2
1
1
1
7
2
5
16
12 16
8
12 16
12 16
E
F
D
A
D
C
A
B
E
D
A
B
D
A
A
C
B
D
B
C
B
A
C
B
C
Insert Arrangement
Service Rating
18-10
A
18-11
A
18-12
A
18-13
A
18-14
A
18-15
A
Number of Contacts
Contact Size
4
5
6
1
8
3
1
1
4**
12
12
12
16
12
4
16
100˚
A
F
H
A
B
G
F
C
A
B
B
E
C
G
I
E
B
D
G
G
F
J
250˚
A
B
C
D
H
J
E
C
D
A
E
D
K
100° Rotation
of 18-9
250° Rotation
of 18-1
Insert Arrangement
Service Rating
18-16
C
18-17
Inst.
18-19
A
18-20
A
18-22
D
18-24
B, C, F, G = A; Bal. = Inst.
Number of Contacts
Contact Size
1
2
5
10
5
3
10
16
12
12 16
16
16
16
CONTACT LEGEND
16
12
8
4
0
* A = Iron; B = Constantan
** A, C = Iron; B, D = Constantan
19
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
110˚
A
E
A
A
B
D
C
A
B
A
B
C
E
C
D
B
E
C
C
B
D
D
260˚
110° Rotation
of 18-20
260° Rotation
of 18-20
Insert Arrangement
Service Rating
18-29
A
18-30
A
18-31
A
20-2
D
20-3
D
20-4
D
Number of Contacts
Contact Size
5
5
5
1
3
4
16
16
16
0
12
12
A
C
A
H
L
A
A
B
C
J
E
F
B
A
G
F
B
G
B
F
K
M
H
F
C
E
C
G
H
N
B
C
B
D
E
D
A
D
E
D
Insert Arrangement
Service Rating
20-6
D
20-7
20-8
20-9
20-11
Inst.
13
20-12
A
A, B, H, G = D; C, D, E, F = A
Inst.
H = D; Bal. = A
Number of Contacts
Contact Size
3
8
2
4
1
7
1
1
16
16
8
16
12 16
16
4
16
F
E
F
E
G
E
F
A
C
H
A
G
A
C
D
C
A
H
A
A
D
I
F
I
B
E
G
B
D
B
B
E
C
D
C
B
D
C
B
Insert Arrangement
Service Rating
20-14
A
20-15
A
20-16
A
20-17
A
20-18
A
20-19
A
3
8
Number of Contacts
Contact Size
2
8
3
7
2
7
5
1
3
6
12
12
12 16
12 16
12 16
CONTACT LEGEND
16
12
8
4
0
20
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
100˚
A
F
A
C
L
A
D
B
C
A
H
G
F
B
C
D
F
K
M
I
E
D
A
C
E
B
G
H
N
D
B
A
B
D
J
E
C
B
100° Rotation
of 20-11
Insert Arrangement
Service Rating
20-20
A
20-21
A
20-22
A
20-23
20-24
20-25
Inst.
13
A
2
8
A
Number of Contacts
Contact Size
1
3
1
8
3
3
2
8
2
4
12
12 16
8
16
16
16
A
B
A
A
L
J
A
K
M
C
B
C
B
N
I
B
F
M
L
M
K
J
D
H
T
P
R
C
E
N
F
L
C
G
H
S
K
K
N
L
B
A
E
H
G
D
M
A
D
D
J
C
B
J
250˚
E
F
F
E
H
G
250° Rotation
of 20-11
Insert Arrangement
Service Rating
20-27
A
20-29
A
20-30
Inst.
13
20-33
A
22-1
D
22-2
D
Number of Contacts
Contact Size
14
17
11
2
3
16
16
16
16
8
8
A
C
F
A
A
C
E
B
B
B
A
D
B
D
C
Insert Arrangement
Service Rating
22-4
A
22-5
D
22-6
D
22-7
E
22-8
E
Number of Contacts
Contact Size
2
2
2
4
2
1
1
2
8
12
12 16
8
16
0
12
CONTACT LEGEND
16
12
8
4
0
21
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
A
D
A
B
E
B
D
C
A
B
B
A
E
C
B
C
D
C
Insert Arrangement
Service Rating
22-9
E
22-10
22-11
B
22-12
D
22-13
E
4
E = D; A, B, C, D = A
Number of Contacts
Contact Size
3
2
2
3
4
1
12
16
16
8
16
12 16
M
V
A
H
L
A
D
A
J
G
A
A
K
G
B
H
F
B
D
U
S
N
R
F
E
B
F
B
J
F
E
C
H
B
G
C
T
P
E
J
H
C
D
E
C
C
G
D
D
E
F
Insert Arrangement
Service Rating
22-14
A
22-15
D = E; A, B, C, E, F = A
22-16
22-17
A = D; Bal. = A
22-18
A
A, B, F, G, H = D; C, D, E = A
Number of Contacts
Contact Size
19
5
1
3
6
1
8
8
16
12 16
12 16
12 16
16
A
L
G
B
E
K
G
F
H
A
B
A
A
F
D
C
A
B
C
M
H
P
C
D
J
J
B
E
H
N
B
C
E
D
C
G
D
F
Insert Arrangement
Service Rating
22-19
A
22-20
A
22-21
A
22-22
22-23
A
4
8
H = D; Bal. = A
Number of Contacts
Contact Size
14
9
1
2
8
16
16
0
16
12
CONTACT LEGEND
16
12
8
4
0
22
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
A
J
H
D
A
G
A
F
A
C
B
F
B
F
B
H
G
E
G
B
E
C
C
C
B
E
C
E
F
D
D
D
G
F
D
E
Insert Arrangement
Service Rating
22-24
22-27
J = D; Bal. = A
22-28
A
22-33
22-36
C, D, E = D; A, B, F = A
A, B, C, D = D; E, F, G = A
H = D; Bal. = A*
Number of Contacts
Contact Size
2
4
1
8
8
7
7
8
12 16
16
12
16
12
A
A
B
F
A
C
F
A
C
G
A
C
B
F
D
J
E
H
C
B
G
G
G
F
H
N
E
B
E
B
K
M
L
E
C
E
D
D
P
R
D
D
S
Insert Arrangement
Service Rating
22-34
D
24-2
D
24-3
D
24-5
A
24-6
A, G, H = D; Bal. = A
Number of Contacts
Contact Size
3
2
7
2
5
16
8
12 16
12
12 16
16
12
A
A
B
C
B
L
F
A
K
M
C
E
A
G
B
A
E
B
D
E
F
P
N
E
D
J
D
B
I
O
G
I
D
C
C
H
F
H
G
Insert Arrangement
Service Rating
24-7
A
24-9
A
24-10
24-11
A
24-12
A
A
7
8
Number of Contacts
Contact Size
2
14
2
3
6
2
4
3
12 16
4
8
12
12
CONTACT LEGEND
16
12
8
4
0
* A, C, E, G = Iron
B, D, F, H = Constantan
23
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
A
A
D
J
B
H
B
D
C
A
B
F
B
C
E
G
H
G
C
G
C
J
K
K
L
D
E
C
F
D
B
A
F
E
E
D
Insert Arrangement
Service Rating
24-16
A, B, F, G = D; C, D, E, = A
24-17
D
24-20
D
24-21
D
24-22
D
4
8
Number of Contacts
Contact Size
1
8
3
3
2
3
2
9
1
9
12 16
12 16
12 16
8
16
A
K
A
H
B
A
A
L
B
C
N
D
P
A
J
L
B
D
E
F
S
G
T
H
U
J
F
B
G
J
C
P
M
E
K
M
Q
H
C
R
V
G
E
C
G
N
C
B
D
W
X
Y
Z
F
D
F
E
Insert Arrangement
Service Rating
24-27
24-28
Inst.
24
28-1
A, J, E = D; Bal. = A
28-2
D
28-3
E
E
7
Number of Contacts
Contact Size
3
8
6
2
12
3
16
16
12
12 16
8
A
S
A
C
B
A
B
A
E
B
D
P
G
E
F
C
B
D
C
Insert Arrangement
Service Rating
28-4
G, P, S = E; Bal. = D
28-5
D
28-6
D
28-7
D
Number of Contacts
Contact Size
2
7
2
1
2
3
2
12 16
4
12 16
4
4
CONTACT LEGEND
16
12
8
4
0
24
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
H
A
G
J
K
L
J
F
A
N
P
R
S
E
H
A
F
U
V
A
B
K
G
F
B
C
G
J
M
L
E
B
G
H
B
K
F
E
D
W
X
C
D
M
E
L
M
C
T
I
D
D
C
Insert Arrangement
Service Rating
28-8
28-9
D
28-10
G = D; Bal. = A
28-11
L, M = E; B = D; Bal. = A
10
A
Number of Contacts
Contact Size
2
6
6
2
4
2
8
3
4
18
12 16
12 16
12
12 16
R
A
S
R
A
S
A
D
B
F
K
A
100˚
P
P
C
E
T
G
V
B
B
B
J
K
Z
L
a
a
H
M
a
N
T
T
C
J
L
T
M
N
C
N
C
b
d
b
W
P
R
S
e
U
U
U
Z
Z
M
M
U
S
N
V
D
D
c
X
Y
b
d
V
V
Y
Y
D
g
H
E
E
R
G
Q
F
P
E
L
L
d
h
W
X
W
X
F
f
F
K
k
K
j
G
G
J
J
m
l
H
H
100° Rotation
of 28-12
Insert Arrangement
Service Rating
28-12
A
28-13
A
28-15
A
28-16
A
Number of Contacts
Contact Size
26
26
35
20
16
16
16
16
C
D
A
A
B
L
B
B
J
L
J
C
E
H
K
E
K
L
M
G
K
C
D
A
F
M
R
J
M
P
E
G
H
F
H
N
G
Insert Arrangement
Service Rating
28-17
28-18
28-19
H, M = B; A, B = D; Bal. = A
R = B; M, N, P = D; A to L = A
M = C; G, H, J, K, L = D; A, B = A; Bal. = Inst.
Number of Contacts
Contact Size
15
16
12
16
4
6
12 16
CONTACT LEGEND
16
12
8
4
0
25
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
A
B
C
J
A
L
b
D
P
C
A
B
E
T
G
F
U
h
H
F
B
J
N
K
K
a
R
f
M
N
E
B
P
H
Z
S
W
V
j
X
C
c
e
d
L
M
G
k
m
g
D
E
D
D
C
n
p
F
r
s
E
Insert Arrangement
Service Rating
28-20
A
28-21
A
28-22
D
32-1
A = E; B, C, D, E = D
Number of Contacts
Contact Size
10
4
37
3
3
2
0
3
12 16
16
4
16
12
B
F
A
K
A
C
A
A
G
E
D
D
E
F
L
B
D
C
O
B
H
G
J
M
H
C
E
N
B
J
Insert Arrangement
Service Rating
32-2
E
32-3
D
32-4
F, J, K, N = A; Bal. = D
12
32-5
D
2
0
Number of Contacts
Contact Size
3
4
2
1
0
2
4
2
4
2
16
12 16
12 16
M
P
A
B
J
W
T
H
I
C
I
D
c
E
K
D
E
E
F
N
Y
R
G
L
H
A
B
X
Y
Z
U
J
c
A
B
C
d
e
F
K
M
N
A
B
h
j
L
S
O
P
R
Z
a
b
P
G
J
K
L
V
d
e
M
H
N
T
O
S
F
f
C
D
E
F
G
C
T
W
k
R
a
U
D
g
G
H
I
J
K
U
V
I
b
W
X
S
X
L
M
N
V
O
Insert Arrangement
Service Rating
32-6
32-7
A, B, h, j = Inst.; Bal. = A
28
32-8
A
32-9
D
A
Number of Contacts
Contact Size
2
3
2
16
7
6
24
2
12
16
4
8
12 16
12 16
12 16
4
CONTACT LEGEND
16
12
8
4
0
26
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
N
A
A
A
B
F
A
M
B
S
P
Y
E
J
C
D
F
G
B
C
X
R
L
C
E
G
B
W
H
K
D
E
K
D
Z
V
T
J
E
D
C
F
H
L
M
N
U
H
F
O
P
G
G
Insert Arrangement
Service Rating
32-10
32-12
C, D, E, F, G = A; Bal. = D
10
32-13
D
32-15
D
A, F = E; G = B; B, E = D; C, D = A
Number of Contacts
Contact Size
2
4
2
8
3
5
5
18
2
0
6
16
12 16
12 16
12
A
B
A
E
B
C
A
B
H
D
C
E
J
C
I
D
100˚
F
G
H
K
T
c
L
M
V
e
D
A
G
D
F
G
H
J
N
O
Y
P
Z
R
E
F
W
S
U
d
K
N
V
a
L
M
T
R
X
P
b
f
I
J
K
L
M
N
O
S
h
g
j
k
m
r
p
x
q
n
u
t
v
s
y
w
U
O
P
U
R
V
S
T
AB
AC
z
AA
C
B
X
W
AD
AE
AG
AF
W
100° Rotation
of 32-6
Insert Arrangement
Service Rating
32-16
A
32-17
32-22
A
36-1
D
D
4
4
Number of Contacts
Contact Size
2
4
3
8
2
16
54
4
18
12 16
16
12 16
A
A
A
A
F
F
B
D
B
E
B
E
C
C
B
C
D
C
D
Insert Arrangement
Service Rating
36-3
36-4
36-5
A
36-6
A
D
A = D; B, C = A
Number of Contacts
Contact Size
3
0
3
3
0
4
2
4
4
12
0
0
CONTACT LEGEND
16
12
8
4
0
27
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
B
A
S
M
A
D
C
H
C
H
E
J
B
E
K
D
U
V
I
G
M
F
L
O
P
Z
a
F
D
E
G
I
L
N
K
n
I
J
J
M
A
R
O
R
N
P
T
P
Z
S
O
X
V
U
S
W
X
V
e
d
e
Y
T
a
H
U
W
c
Y
B
Y
a
b
k
Z
f
g
e
j
b
d
p
c
d
j
m
C
h
K
f
W
h
t
f
g
v
k
t
F
b
n
R
p
u
v
r
m
L
s
x
u
X
c
G
w
r
s
w
z
x
y
y
z
T
N
Insert Arrangement
Service Rating
36-7
A
36-8
A
36-9
A
Number of Contacts
Contact Size
7
40
1
46
1
4
2
14 14
12 16
12 16
12 16
8
A
B
A
B
L
A
B
100˚
110˚
C
P
D
E
F
S
G
C
P
D
Q
F
S
G
E
R
C
P
D
Q
E
F
G
T
H
J
K
M
N
b
s
H
J
K
L
M
N
H
J
K
Y
p
L
Z
M
N
b
O
Q
R
g
v
T
U
k
O
d
T
U
k
O
d
R
S
U
k
V
c
W
m
X
n
a
c
V
W
m
X
Y
p
Z
q
a
r
b
s
V
W
m
X
Y
p
Z
a
r
c
e
t
f
g
h
j
d
e
f
h
j
f
g
v
e
t
h
j
n
q
z
r
s
q
z
n
u
v
w
x
w
u
w
x
t
u
x
y
y
y
z
100° Rotation
of 36-10
110° Rotation
of 36-10
Insert Arrangement
Service Rating
36-10
A
36-11
A
36-12
A
Number of Contacts
Contact Size
48
48
48
16
16
16
S
A
e
A
P
N
R
c
B
J
B
T
d
U
f
Q
C
M
L
I
C
P
K
V
P
N
D
E
R
S
k
K
A
Q
M
m
j
J
B
N
L
b
W
G
H
D
h
Z
g
Q
H
C
a
X
M
F
G
D
G
E
Y
L
F
E
H
K
F
J
Insert Arrangement
Service Rating
36-13
N, P, Q = E; Bal. = A
15
12 16
36-14
36-15
D
5
M = D; Bal. = A
Number of Contacts
Contact Size
2
5
8
6
35
16
12 16
CONTACT LEGEND
16
12
8
4
0
28
QWL
contact arrangements
front face of pin insert or rear face of socket insert illustrated
S
B
M
A
F
L
B
A
D
C
D
E
J
C
H
E
J
100˚
I
100˚
U
110˚
O
P
F
L
G
M
W
f
G
M
Z
a
D
E
H
I
I
N
K
N
K
J
A
V
O
T
O
T
P
U
P
R
a
S
b
S
b
R
a
d
e
V
e
V
W
f
X
g
p
X
H
U
n
Y
B
c
Y
c
Y
Z
j
Z
j
e
d
h
d
h
g
p
C
m
f
K
W
t
k
t
k
R
m
n
b
c
u
u
v
v
F
w
w
L
X
G
r
s
r
s
y
x
y
x
T
N
z
z
100° Rotation
of 36-7
110° Rotation
of 36-7
100° Rotation
of 36-9
Insert Arrangement
Service Rating
36-16
A
36-17
A
36-18
A
Number of Contacts
Contact Size
7
40
7
40
1
2
8
14 14
12 16
12 16
12 16
4
B
C
H
A
I
B
J
C
K
A
A
B
L
D
C
D
E
F
G
V
E
U
k
K
J
X
p
F
D
E
F
G
H
J
K
M
b
N
c
L
M
c
t
N
P
R
S
H
T
L
Z
r
T
V
m
z
W
Y
q
P
R
S
T
j
U
W
g
M
N
O
P
R
S
a
b
f
g
h
x
i
d
u
X
Y
Z
a
j
n
h
e
f
U
V
d
W
e
X
d
v
w
s
Y
Z
a
b
AA AB
y
k
AC
AH
m
c
AD
AE
AF
Insert Arrangement
Service Rating
36-20
36-52
A
40-1
D
A
2
Number of Contacts
Contact Size
2
8
30
52
6
24
12 16
16
12 16
1
2
3
4
5
6
7
8
9
10
11
27
A
B
S
C
T
n
D
A
B
E
C
F
E
Y
u
F
H
a
J
K
c
L
M
D
12
13
14
15
16
17
18
19
N
P
R
k
U
V
q
W
G
L
H
K
I
J
20
21
22
23
24
25
26
28
X
Z
b
d
f
g
P
Q
R
M
N
O
W
d
S
T
i
h
i
j
m
p
r
s
29
48
30
49
67
31
50
68
32
51
69
33
52
70
34
53
71
35
54
72
36
55
73
37
56
74
38
57
X
U
t
v
w
x
y
z
AA AB
AL AM AN
V
Y
g
Z
a
39
58
40
59
41
60
42
61
43
62
44
63
45
64
46
65
47
66
AC
AD AE
AH AJ AK
AW
BA BB BC BD BE BF BH
AF
h
c
b
e
l
AP AR AS AT AU AV
AZ
BJ BK
AX AY
f
m
j
o
BL BM BN BP BR
BS BT BU BV
k
r
n
s
q
u
p
t
75
76
77
78
79
80
81
82
83
84
85
Insert Arrangement
Service Rating
40-9
40-56
A
48-62
D
A
Number of Contacts
Contact Size
1
8
22 24
12 16
85
85
16
16
CONTACT LEGEND
16
12
8
4
0
29
Special
contact arrangements
Requirements for more complex circuits prompted
Amphenol to provide inserts not covered by the MS draw-
ings. Illustrated here and on the following pages are
insert layouts which have from one contact (high tension)
to the 104 contact insert in shell size 44.
Many of these special inserts are also available in alter-
nate keyway arrangements. Please contact Amphenol,
Sidney, NY for additional information on special circuit
application requirements.
front face of pin insert or rear face of socket insert illustrated
M
V
J
A
P
F
A
C
K
L
H
A
C
A
N
R
U
S
A
E
K
H
B
D
B
A
C
B
D
C
G
E
G
B
J
F
T
L
C
E
C
B
D
D
D
G
E
B
F
F
Insert Arrangement
Service Rating
14S-A7
16-59
A
20-26
A
20-51
20-57
A
20-58
A
A
7
A
3*
8
Number of Contacts
Contact Size
4
19
7*
5
5
16
12
16
12 for #14 or 16 wire
12 16
A
H
J
A
E
G
B
C
G
K
A
B
A
F
C
D
C
A
B
H
F
B
H
L
B
L
F
A
D
F
C
P
M
C
E
M
N
N
E
K
D
E
C
J
F
E
D
B
D
H
Insert Arrangement
Service Rating
20-59
20-66
20-79
22-63
A
22-65
H = D; Bal. = A
8*
22-70
A
A
A
5
H = D; Bal. = A
7* 1*
Number of Contacts
Contact Size
3*
1
4
8
8
5
8 for #10 or 12 wire
16 12 for #10 wire
16 12 for #16 wire
12 16
12 for #14 or 16 wire
12 16
H
J
N
A
A
P
F
M
K
B
N
K
E
A
B
E
A
D
L
C
D
D
B
L
M
E
D
C
B
A
C
J
E
C
C
H
F
B
Insert Arrangement
Service Rating
22-80
A
24-19
24-51
A
24-52
24-53
24-58
A
Hi-Volt
A
5*
8
A
3
Number of Contacts
Contact Size
3*
12
16
5*
1
3
8
7
8 for #10 or 12 wire
B, E for AN #10 or 12 wire
A, C, D for AN #8 wire
12
12 16
* Solderless
CONTACT LEGEND
16
12
8
4
0
30
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
L
P
J
E
90˚
A
N
D
K
F
A
C
F
N
E
K
C
F
A
C
R
V
U
R
M
G
S
P
B
M
F
L
E
B
J
E
G
B
G
H
J
C
B
A
H
A
S
N
T
B
C
R
P
H
D
D
D
M
K
F
D
E
L
Insert Arrangement
Service Rating
24-59
A
24-60
A
24-65
A
24-66
D
24-67
Inst.
19
Number of Contacts
Contact Size
7
7
7*
11
4
7
12 16
8 for #10 or 12 wire
12 16
12
12
E
90˚
A
B
C
N
D
D
F
F
A
C
F
A
C
R
V
U
E
F
S
G
T
H
J
G
G
E
A
S
P
E
B
E
B
G
H
J
C
B
A
K
L
M
P
Q
D
B
N
T
U
R
V
D
D
M
K
C
W
X
Z
L
Insert Arrangement
Service Rating
24-71
A
24-75
24-79
24-80
Inst.
23
24-84
A
A
2
A
5
8
Number of Contacts
Contact Size
2* 5*
5
8
1
18
8
8 for #10 or 12 wire
8 for #16 wire
16
12 12 (Coax) RG-188/U
or RG-174/U
16
M
L
N
T
1
J
A
15
23
2
B
A
C
D
P
14
24
28
H
B
C
P
R
S
U
G
T
17
3
K
E
K
J
H
U
13
12
11
F
S
Q
A
B
C
D
4
M
L
N
25 18
N
L
22 27
26
5
M
19
R
V
21
F
E
H
20
8
6
10
Z
W
X
F
Y
7
9
a
E
D
J
K
Insert Arrangement
Service Rating
24-96
Inst.
28
24-AJ
A
28-51
A
28-59
A
Number of Contacts
Contact Size
25
12
7
10
16
16
12
12 16
* Solderless
CONTACT LEGEND
16
12
8
4
0
31
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
R
A
A
A
N
N
N
C
P
B
R
B
R
B
R
M
T
M
T
M
T
P
P
P
A
D
N
L
S
T
L
L
L
C
C
C
D
D
D
K
J
K
J
K
J
E
M
B
A
F
S
S
S
E
E
E
C
B
H
H
H
F
F
F
H
K
J
Insert Arrangement
Service Rating
28-66
A
28-72
28-74
A
28-75
A
28-79
A
–
3
Number of Contacts
Contact Size
2
14
12
9* 4*
3*
9* 7*
7
9
8
4 (Coax) RG-59A/U
or RG-62A/U
16
8
8 for #10 wire
(S, T, R)
16 8 for #10 wire
8
16
13
1
2
12
B
C
H
A
1
4
2
A
3
11
3
23
14
24
25
D
E
F
15
19
16
17
G
F
I
B
C
22
21
H
5
G
10
4
18
20
J
E
D
5
9
6
8
6
7
Insert Arrangement
Service Rating
28-82
D
28-84
28-AY
A
32-25
A
A
9
8
Number of Contacts
Contact Size
2
8
4
4
4
5
25
12
16
12
1
A
N
B
M
P
90˚
C
S
i
E
U
R
L
16
2
F
H
A
D
S
K
a
j
b
k
r
L
b
s
15
3
K
N
M
c
P
J
c
17
Z
T
J
d
Y
B
C
18
R
T
V
m
z
X
W
n
4
5
6
14
13
12
X
H
i
m
U
f
26
27
31
19
20
a
r
Y
Z
q
d
u
f
g
q
W
n
g
h
25
V
28
21
8
F
p
s
j
D
E
p
h
k
y
30
v
A
E
t
B
D
24
C
29
23
x
w
F
H
AA
u
t
v
w
11
7
22
9
10
BB
CC
G
90° CW Rotation
of 32-15
Insert Arrangement
Service Rating
32-31
A
32-48
Inst.
48
32-52
D
32-53
t, u = E; Bal. = Inst.
37
12 16
Number of Contacts
Contact Size
31
6
2
0
5
16
16
12
* Solderless
CONTACT LEGEND
16
12
8
4
0
32
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
M
R
H
A
T
H
I
D
E
N
Y
F
A
B
C
U
S
c
A
B
C
P
J
Z
X
T
O
P
Z
a
b
D
C
A
B
J
K
L
V
a
D
E
d
e
U
Y
F
E
B
W
V
R
N
K
G
F
H
W
D
C
S
X
G
M
L
Insert Arrangement
Service Rating
32-56
A
32-57
**
32-58
32-60
A
–
4
Number of Contacts
Contact Size
24
6
6
2
15
8
16 12 for #10 wire
12 0 (Coax) RG-71/U
4 (Coax) RG-161/U
or RG-179/U
16 8 (Coax) RG-124/U
B
A
C
A
B
D
E
C
I
D
A
B
G
F
J
H
E
F
K
M
G
L
H
L
J
O
P
N
R
U
T
V
W
K
M
N
D
S
C
F
R
P
E
X
g
Y
Z
a
c
n
b
f
d
e
q
O
S
k
v
j
G
H
K
L
M
h
t
p
x
T
m
r
J
s
u
y
w
N
P
U
V
AC
AB
z
AA
W
X
AD
R
AE
Q
AF
AG
Insert Arrangement
Service Rating
32-62
**
32-64
Inst.
54
32-68
A
Number of Contacts
Contact Size
2
4
1
8
2
16
2
12
4
12 16 8 (Coax) RG-124/U
16
16 4 (Coax) RG-58C/U
21
1
20
36
2
1
2
3
D
A
19
22
3
18
23
1
35
37
4
6
7
9
5
8
4
44
17
24
38
34
45
5
8
9
10
11
12
25
16
15
14
43
42
31
12
E
39
33
46
29
7
2
6
6
26
8
40
32
13
27
7
13
14
15
16
41
28
30
11
3
5
C
B
19
9
17
18
4
10
Insert Arrangement
Service Rating
32-73
A
32-75
32-76
A
32-79
D
8, 9 = D
Number of Contacts
Contact Size
46
2
7
19
4
1
8
16
12 8 (Coax) RG-180B/U
12
4
** Consult Amphenol, Sidney, NY for service rating of power contacts.
CONTACT LEGEND
16
12
8
4
0
33
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
b
A
a
B
A
A
B
Z
C
d
C
D
E
A
B
c
F
G
H
P
Z
J
Y
D
K
L
M
X
N
O
R
E
m
s
U
S
T
V
W
k
D
X
Y
a
W
V
C
F
E
F
t
n
r
c
b
d
p
e
f
g
j
h
k
H
G
H
K
L
M
n
q
y
r
f
m
j
q
p
u
s
t
v
J
g
L
i
w
x
D
C
U
J
N
P
z
AA
AB
AC
T
AH
AG
K
h
AD
AE
R
Q
S
AF
R
B
M
P
N
Insert Arrangement
Service Rating
32-82
A
32-AF
A
36-51
D
36-54
A
Number of Contacts
Contact Size
4
12
55
2
0
2
8
8
31
16
4
16
16
4
B
P
C
R
B
A
b
D
J
A
A
a
D
B
A
C
H
E
Z
H
Y
C
K
E
F
G
M
F
L
c
Y
D
J
U
L
I
M
N
S
T
N
X
K
n
E
O
m
R
s
P
U
T
S
d
k
D
B
Z
a
b
V
W
n
X
W
X
V
e
W
V
F
t
n
r
c
c
d
v
f
g
h
i
j
k
Y
a
b
k
Z
f
g
H
d
j
m
p
q
r
s
t
f
m
j
h
q
p
t
AB
z
AA
g
L
u
i
w
x
y
p
U
u
J
v
AE
T
AH
AC
K
r
h
s
w
z
S
AD
AF
x
y
C
R
M
P
N
AJ
Insert Arrangement
Service Rating
36-55
A
36-59
A
36-60
**
36-64
–
4
Number of Contacts
Contact Size
31
8
50
3
40
7
16 8 for #6 wire
16 12 for #10 wire
16 12 for #10 wire
0 (Coax) RG-11/U,
RG-12/U or RG-13/U
B
P
C
R
A
D
A
A
H
Y
K
E
F
J
48
53
59
68
77
49
54
60
69
78
50
55
63
72
81
86
88
51
56
64
73
52
57
65
74
82
87
89
U
L
M
N
S
T
F
B
D
B
Z
a
b
V
W
n
X
p
58
67
76
84
61
70
79
85
62
71
80
66
75
83
c
d
v
f
g
h
i
j
k
E
C
m
q
r
s
t
G
AB
z
AA
u
w
x
y
AE
AH
AC
91
90
AD
AF
C
D
AJ
Insert Arrangement
Service Rating
36-65
36-71
A
36-73
36-74
A
–
4
–
7
Number of Contacts
Contact Size
3
50
43
1
0 (Coax) RG-59/U, RG-62/U
or RG-71/U
12 16
4 (Coax) RG-62B/U
16 8 (Coax) RG-187/U
** Consult Amphenol, Sidney, NY for service rating of power contacts.
CONTACT LEGEND
16
12
8
4
0
34
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
1
4
2
5
1
2
10
1
A
3
31 32
29 33 34 37
3
4
5
9
6
7
8
F
B
9
2
6
7
11
13
9
18
27
36
10
19
28
37
11
12
21
30
39
28 30 36 35 38
27 26 48 41 40 39
25 47 46 42 43
24 23 45 44
8
13
14
15
16
17
8
3
20
29
38
10 11
13 12
15 14
18 16
14
12
22
31
23
32
40
24
33
41
45
25
34
42
26
35
E
C
G
7
4
22 21 20
43
46
44
47
19
17
D
6
5
Insert Arrangement
Service Rating
36-75
36-76
A
36-77
36-78
A
A
D
7
4
Number of Contacts
Contact Size
48
47
2
12
8
16 for #14 wire
16
16
S
1
1
A
R
A
B
T
Q
d
2
3
4
5
2
3
4
5
U
f
F
B
C
c
P
e
k
6
7
8
9
10
15
6
7
8
9
10
V
D
N
m
j
b
11
12
13
14
11
12
13
14
15
E
C
W
E
G
M
g
h
Z
a
F
X
16
17
18
19
16
17
18
19
L
Y
G
D
K
H
J
20
20
Insert Arrangement
Service Rating
36-79
A
36-80
A
36-83
36-85
–
7
M = D; Bal. = A
35
Number of Contacts
Contact Size
20
20
12
12 for #10 wire
4 (Coax) RG-58/U
16 for #12 wire
A
d
z
e
y
f
Q
A
B
x
P
g
O
R
C
w
Y
h
j
S
T
N
v
D
E
c
Z
N
B
X
M
u
a
U
b
W
L
k
F
n
V
q
K
G
t
m
J
H
C
G
s
r
p
Insert Arrangement
Service Rating
36-97
C
36-AF
A
40-5
A
Number of Contacts
Contact Size
1
48
5
4/0
16
0
CONTACT LEGEND
16 12
8
4
0
4/0
35
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
24
42
54
16
1
1
23
41
53
2
15
A
25
43
22
40
3
B
2
17
35
E
28
26
44
18
C
D
21
4
14
27
H
F
J
3
K
G
O
29
34
28
20
19
18
17
5
13
45
55
4
27
19
21
I
L
39
29
30
33
56
6
7
26
20
60
59
N
52
46
47
P
12
5
Q
M
32
31
57
38
30
25
51
36
58
49
34
11
6
8
48
33
31
U
R
S
37
50
35
T
32
9
16
X
V
W
c
10
22
7
24
23
10
Y
b
15
8
11
9
14
Z
a
13
12
Insert Arrangement
Service Rating
40-10
40-35
D
40-53
A
A
9
8
Number of Contacts
Contact Size
4
4
16
16
35
60
12
16
1
1
2
24
42
2
1
3
4
5
6
7
23
41
25
43
3
22
40
39
26
44
56
4
8
9
10 11 12 13 14 15
21
27
5
16 17 18 19 20 21 22 23 24
54
60
28
29
20
19
18
53
52
51
55
45
46
47
6
7
8
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49
38
37
16
59
50
35
14
57
48
33
12
30
31
10
58
4
2
50 51 52
57
54 55 56
59
53
17
36
15
49
34
13
32
11
9
58
3
Insert Arrangement
Service Rating
40-57
40-61
40-62
A
E
4
0
A
3
Number of Contacts
Contact Size
1
8
55
60
12 16
16
1
24
P
A
23
2
1
N
22
3
25
42
26
B
R
S
4
21
41
53
27
45
h
43
55
54
60
59
44
56
57
M
g
40
28
20
5
T
i
p
C
f
U
29
30
39
38
37
19
18
17
6
7
61
46
47
52
51
j
n
d
L
V
D
q
c
4
2
31
m
a
k
W
58
49
34
50
48
8
b
X
32
36
E
K
9
16
Y
Z
33
11
35
14
15
10
3
F
J
13
12
H
Insert Arrangement
Service Rating
40-63
A
40-64
–
40-66
–
4
Number of Contacts
Contact Size
61
3
20 13
16 for #14 wire
12 16 8 (Coax) RG-124/U
0 (Coax) RG-63B/U
CONTACT LEGEND
16
12
8
4
0
36
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
N
A
B
1
8
P
B
M
2
3
4
5
W
6
7
9
10
R
L
C
11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
53 54 55 56 57
X
C
F
E
J
D
K
V
D
S
H
J
E
T
U
H
L
F
K
58 59 60 61
M
G
Insert Arrangement
Service Rating
40-67
A
40-68
A
40-70
A
Number of Contacts
Contact Size
1
10
21
61
16 4 (Coax) RG-59/U
8
16
1
24
23
2
1
A
B
22
3
25
42
54
26
6
4
21
41
27
45
43
55
44
56
57
2
40
28
20
5
5
53
60
59
29
30
39
38
37
19
18
6
7
C
F
E
J
61
D
52
51
46
47
H
31
4
3
58
49
34
50
48
17
8
32
36
9
16
33
11
35
14
15
10
L
K
M
13
12
Insert Arrangement
Service Rating
40-72
A
40-73
A
40-74
A
Number of Contacts
Contact Size
1
10
61
1
1
4
16 4 (Coax) RG-9B/U
16
12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U
or RG-214/U
1
2
3
4
1
A
B
5
6
7
8
9
10 11
5
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
4
2
C
F
E
J
D
H
59 60 61 62
L
3
K
M
Insert Arrangement
Service Rating
40-75
E
40-80
A
40-81
A
62
Number of Contacts
Contact Size
1
4
0
1
10
4
12
16
16 for #14 wire
CONTACT LEGEND
16
12
8
4
0
37
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
24
42
54
1
1
2
3
4
23
41
53
2
1
6
1
25
43
22
40
3
5
6
7
8
9
10 11
26
44
21
4
27
12 13 14 15 16 17 18 19
28
20
19
18
17
5
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
45
55
39
29
5
7
2
56
6
7
60
59
52
46
47
57
38
30
4
2
51
36
58
49
34
8
48
33
31
37
50
35
32
9
16
59 60 61 62
4
3
10
15
3
11
14
13
12
Insert Arrangement
Service Rating
40-82
A
40-85
A
40-86
40-87
–
4
D
7
4
Number of Contacts
Contact Size
62
60
16
16 for #14 wire
0(Coax) RG-115A/U
38
20
2
A
B
N
C
37
21
B
H
8
19
6
9
22
36
M
D
10
18
A
B
7
35
23
G
C
3
A
1
L
E
34
24
11
17
5
4
E
25
33
H
D
16
F
12
K
F
32
26
13
15
14
J
31
27
G
30
28
29
Insert Arrangement
Service Rating
40-AD
40-AG
A
40-AP
40-AR
A
E
2
Inst.
Number of Contacts
Contact Size
4
8
4
0
38
7
3
4
3
0
12
4/0
12
17
25
1
33
34
E
B
31
35
32
16
2
30
36
18
P
F
8
1
A
B
19
18
9
29
37
11
15
3
26 27 28 29
30 31 32 33
35 36 37 38
40 41 42 43
7
10
24
19
28
26
38
40
N
G
2
4
A
27
39
14
13
4
D
3
34
23
39
20
17
6
12
21
5
C
5
25
16
24
20
M
H
12
6
22
21
C
K
15
13
14
11
7
L
J
23
22
10
8
9
Insert Arrangement
Service Rating
40-AS
A
40-AT
A
40-AU
40-AV
D
A
10
8
Number of Contacts
Contact Size
15
16
25
12
24 18
12 16
1
8
3
4
1
3
16
2/0
CONTACT LEGEND
16 12
8
4
0
2/0
4/0
38
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
2
30
1
A
E
B
29
51
A
S
3
28
C
W
D
X
u
F
Z
w
H
J
K
c
R
B
4
33
L
g
M
h
N
i
P
j
R
k
S
m
T
n
U
p
5
27
32
T
52
V
s
Y
a
x
b
y
d
P
50
h
U
34
31
C
26
25
6
q
f
g
V
49
35
r
t
v
z
AA
AZ
AB
BA
7
f
p
i
W
X
24
8
N
D
D
C
A
AC
BB
AD
BC
BY
AE AF AH
AJ
BH
AK
AL AM
AN
48
47
46
45
36
n
j
23
AP
AR
BN
AS
BP
CH
AT
AU AV
BF
AW AX AY
BJ BK BL
B
37
38
39
40
q
a
J
d
m
k
9
22
BD BE
BM
11
c
E
10
Y
M
21
20
BR BS BT
BZ CA CB
BU
BV BW BX
42
12
b
Z
CC CD CE CF
CM CN CP
CS
L
F
13
CJ
CK CL
CR
19
44
18
14
16
H
K
41
43
17
15
Insert Arrangement
Service Rating
44-52
A
44-53
A
48-51
A
Number of Contacts
Contact Size
104
16
18 18
16 8 (Coax) RG-124/U
42 10
4
16
8
0 (Coax) RG-41/U
1
32
2
31
44
3
A
30
43
A
L
b
B
C
D
4
33
29
28
34
5
E
T
g
F
G
V
j
H
J
6
52
45
53
27
26
25
24
23
22
7
42
35
K
a
M
c
N
P
R
51
46
56
8
S
U
h
W
k
X
Z
B
D
9
e
f
d
r
54
48
38
55
49
39
47
37
E
C
50
40
10
11
41
36
m
21
12
20
n
p
s
13
19
14
18
15
16
17
Insert Arrangement
Service Rating
48-52
A
48-53
D
Number of Contacts
Contact Size
56
5
37
16 0 (Coax) RG-41/U
12
CONTACT LEGEND
16
12
8
4
0
39
Special
contact arrangements
front face of pin insert or rear face of socket insert illustrated
38
2
37
60
77
2
30
3
1
36
59
29
51
4
3
40
1
35
41
5
28
34
4
33
39
61
6
58
42
33
5
27
32
52
7
62
50
78
34
32
31
30
43
31
57
26
25
74
73
8
6
75
44
56
49
35
9
7
8
24
70
69
D
C
A
48
47
46
45
36
10
29
28
76
23
72
53
B
71
50
67
37
38
39
40
68
9
11
12
22
11
55
10
45
14
27
26
21
63
42
20
12
46
15
66
13
64
65
54
47
25
13
19
44
18
52
48
24
14
16
49
51
16
23
20
19
41
43
17
22
17
15
18
21
Insert Arrangement
Service Rating
48-54
48-55
A
A
4
Number of Contacts
Contact Size
42 10
68
2
2
8
6
4
16
8
0 (Coax) RG-59/U
16 12
2
1
2
30
30
29
1
29
51
3
3
33
34
28
28
4
4
33
51
52
5
5
27
27
32
32
52
50
50
34
31
31
26
23
26
25
6
6
25
49
49
35
35
7
8
7
8
24
24
D
C
A
D
A
48
47
46
45
48
47
46
45
44
18
36
36
37
38
39
40
23
B
C
B
37
38
39
40
9
9
22
22
11
11
10
10
12
21
20
21
20
42
42
12
13
13
19
19
44
18
14
14
16
16
41
41
43
43
17
17
15
15
Insert Arrangement
Service Rating
48-57
A
48-60
A
4
Number of Contacts
Contact Size
42 10
16
4
0
42 10
16
8
8
0 (Coax) RG-214/U
CONTACT LEGEND
16
12
8
4
0
40
QWL – accessories
cabling information
The Amphenol® QWL series of electrical connectors has
been designed with the problems of multi-conductor
cable users in mind. Two of these problems, namely
water proofing and strain relief, are solved by the radial
inward compression of an internal neoprene gland in the
various cable accessories shown on the following pages.
For additional strain relief beyond that provided by the
gland, both cable grips and bar clamps are available.
Since the glands close down from .094” to .145”
(depending on shell size), the optimum condition for
cable users is to select a gland with an I.D. only slightly
larger than the maximum O.D. of the cable. The inside
diameter of the accessory housing determines the maxi-
mum diameter of the cable as shown in the tabulation
below. Smaller sizes than those shown in each shell size
can be accommodated by smaller compression glands.
Different cable manufacturers use different constructions
and cable lays in manufacturing multi-conductor cable.
The specific cabling manufacturing specification should
be known by the customer in detail in order to properly
figure each QWL application. This knowledge can save
many individual wire crossovers in any given run of cable.
Crossovers add materially to the cable diameter without a
cable accessory. In those cases where diameter buildup
is impossible to avoid, special cable accessories with
longer barrels are available.
How to order information is covered in detail on pages 4
and 5. In selecting the base number below, care should
be used, as some of the cable accessories are provided
with protection cap attachment rings, while others are
provided with the Kellems strain relief grip as shown. If a
type or cable accommodation size is not found herein
that fulfills your application, please contact Amphenol,
Sidney, NY.
All dimensions for reference only.
Approx. Work Length (Internal)
Shell
Size
QWL Connector
Accessory Thd.
Minimum Housing
Inner Diameter
Maximum Cable
Outer Diameter
Short
.250
Long
10
12
14
16
18
20
22
24
28
32
36
40
44
48
.500-28
.625-24
.359
.484
.359
.484
.375
.750-20
.401
.609
.609
.875-20
.500
.734
.734
1.000-20
1.125-18
1.250-18
1.375-18
1.625-18
1.875-16
2.062-16
2.312-16
2.625-16
2.875-16
1.120
1.370
1.370
1.370
1.370
1.370
1.370
1.370
.859
.859
.984
.984
1.109
1.234
1.427
1.708
1.895
2.130
2.375
2.630
1.109
1.234
1.427
1.708
1.895
2.130
2.375
2.630
5.000
6.000
5.000
6.000
2.218
6.000
41
QWL – cable accessories
10-101332
10-101335
Short barrel with grip
Short barrel with attachment ring
10-101333
10-130380
Short barrel without grip
Short barrel length with attachment
ring & strain relief bars
10-101334
10-113637
Short barrel with grip & attachment ring
Long barrel with attachment ring and grip
42
QWL – accessories
10-130380
cable sealing adapter (with clamp bars)
H
B
E
F
D
LEFT HAND
A
A
J
G
C
SECTION A-A
Type I Straight
C
B
H
E
F
D
LEFT HAND
J
G
Type II Step Down
H
B
E
F
D
LEFT HAND
A
A
J
G
C
SECTION A-A
Type III Step Up
43
QWL – accessories
10-130380
cable sealing adapter (with clamp bars)
All dimensions are for reference only.
Used
With
Shell
Size
Cable Range
G
Dia.
+.010
–.020
B
+.000
–.010
C
+.010
–.000
E
Free
Max
F
Part
Number*
Max.
Dia.
Min.
Dia.
D Thread
Class 2B-LH
+.010
–.020
H
Max.
J
Max.
Type
I
10-130380-141
10-130380-142
10-130380-143
10-130380-161
10-130380-162
10-130380-171
10-130380-181
10-130380-182
10-130380-183
10-130380-184
10-130380-185
10-130380-186
10-130380-201
10-130380-202
10-130380-203
10-130380-204
10-130380-205
10-130380-206
10-130380-207
10-130380-221
10-130380-222
10-130380-223
10-130380-224
10-130380-242
10-130380-243
10-130380-244
10-130380-245
10-130380-246
10-130380-247
10-130380-281
10-130380-282
10-130380-283
10-130380-284
10-130380-321
10-130380-322
10-130380-323
10-130380-324
10-130380-325
10-130380-326
10-130380-361
10-130380-362
10-130380-363
10-130380-364
10-130380-365
10-130380-366
10-130380-367
10-130380-401
10-130380-402
10-130380-403
10-130380-404
10-130380-441
14S
14S
14S
16S
16S
16
18
18
18
18
18
18
20
20
20
20
20
20
20
22
22
22
22
24
24
24
24
24
24
28
28
28
28
32
32
32
32
32
32
36
36
36
36
36
36
36
40
40
40
40
44
.460
.438
.366
.344
.306
.436
.511
.406
.715
.605
.406
.449
.637
.436
.531
.511
.715
.626
.787
.531
.637
.696
.626
1.005
.567
.787
1.055
.567
.517
.875
.692
1.185
.857
.755
1.320
.875
1.105
1.240
.637
.958
1.250
1.185
1.775
1.406
1.320
.692
.511
.875
1.605
1.185
1.055
.984
1.775
.750
.875
.812
.938
.750-20UNEF 1.125
.750-20UNEF 1.125
.750-20UNEF 1.125
.875-20UNEF 1.250
.875-20UNEF 1.250
.875-20UNEF 1.125
1.782
2.126
2.126
2.282
2.282
2.215
3.032
2.933
2.485
3.032
3.063
2.621
2.933
2.631
2.996
2.933
3.062
2.933
3.063
2.933
2.933
3.266
3.059
3.059
3.204
3.059
3.059
3.121
3.059
3.184
3.059
3.121
3.184
3.059
3.184
3.184
3.059
3.121
3.246
3.184
3.500
3.246
3.246
3.059
2.875
3.121
3.469
3.184
3.184
3.121
4.281
.938
.938
3.229
3.573
3.573
3.854
3.854
3.834
4.776
4.677
4.104
4.776
4.607
4.365
4.677
4.365
4.740
4.677
4.807
4.677
4.807
4.677
4.677
5.250
4.803
4.803
5.198
4.803
4.803
5.115
4.803
5.178
4.803
5.115
5.178
4.803
5.178
5.178
4.803
5.115
5.240
5.178
5.619
5.240
5.240
4.803
4.619
5.115
5.588
5.178
5.178
5.115
6.588
1.062
1.125
1.125
1.375
1.375
1.125
1.688
1.562
1.125
1.688
1.812
1.375
1.562
1.375
1.688
1.562
1.812
1.562
1.812
1.562
1.562
2.469
1.812
1.812
2.469
1.812
1.812
2.125
1.812
2.469
1.812
2.125
2.625
1.812
2.469
2.469
1.812
2.125
2.625
2.469
3.171
2.625
2.625
1.812
1.375
2.125
3.171
2.469
2.469
2.125
3.171
III
III
III
III
I
.375
.875
.938
.938
.530
1.000
1.000
.875
1.062
1.062
.938
1.062
1.062
1.062
1.188
1.188
1.188
1.188
1.188
1.188
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.438
1.438
1.438
1.438
1.562
1.562
1.562
1.562
1.562
1.562
1.812
1.812
1.812
1.812
2.062
2.062
2.062
2.062
2.062
2.062
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.562
2.562
2.562
2.562
2.875
.605
.500
.828
1.188
1.062
.875
1.250 1.000-20UNEF 1.250
1.125 1.000-20UNEF 1.250
1.094 1.000-20UNEF 1.125
1.250 1.000-20UNEF 1.250
1.000 1.000-20UNEF 1.250
1.062 1.000-20UNEF 1.250
1.125 1.125-18UNEF 1.250
1.125 1.125-18UNEF 1.250
1.125 1.125-18UNEF 1.250
1.125 1.125-18UNEF 1.250
1.250 1.125-18UNEF 1.250
1.125 1.125-18UNEF 1.250
1.250 1.125-18UNEF 1.250
1.250 1.250-18UNEF 1.250
1.250 1.250-18UNEF 1.250
1.375 1.250-18UNEF 1.500
1.375 1.250-18UNEF 1.250
1.375 1.375-18UNEF 1.250
1.812 1.375-18UNEF 1.500
1.375 1.375-18UNEF 1.250
1.375 1.375-18UNEF 1.250
1.625 1.375-18UNEF 1.500
1.375 1.375-18UNEF 1.250
1.875 1.625-18UNEF 1.500
1.625 1.625-18UNEF 1.250
1.625 1.625-18UNEF 1.500
1.875 1.625-18UNEF 1.500
III
III
II
.699
.500
.562
1.188
1.312
1.000
1.062
1.000
1.188
1.062
1.312
1.062
1.312
1.062
1.062
1.780
1.312
1.312
1.780
1.312
1.312
1.546
1.312
1.780
1.312
1.546
2.000
1.312
1.780
1.780
1.312
1.546
2.000
1.780
2.438
2.000
2.000
1.312
1.000
1.546
2.438
1.780
1.780
1.546
2.438
III
III
I
.750
.530
.625
I
.605
II
.628
III
I
.720
.900
III
I
.625
.750
III
II
.790
.720
II
1.130
.680
III
III
I
.900
1.180
.680
III
I
.630
I
1.000
.805
III
I
1.310
.970
III
II
.880
I
1.427
.970
III
II
1.875
1.875
1.875
1.875
1.875
2.062
2.062
2.312
2.062
2.062
2.062
2.000
2.062
2.500
2.312
2.312
2.312
2.750
1.875-16UN
1.875-16UN
1.875-16UN
1.875-16UN
1.875-16UN
1.875-16UN
2.0625-16UN
2.0625-16UN
2.0625-16UN
2.0625-16UN
2.0625-16UN
2.0625-16UN
2.0625-16UN
2.3125-16UN
2.3125-16UN
2.3125-16UN
2.3125-16UN
2.625-16UN
1.250
1.500
1.500
1.250
1.500
1.500
1.500
1.625
1.500
1.500
1.250
1.250
1.500
1.625
1.500
1.500
1.500
1.625
1.230
1.328
.750
I
I
II
1.055
1.375
1.310
1.900
1.530
1.445
.805
II
III
II
III
I
I
II
.603
II
1.000
1.730
1.310
1.180
1.109
1.900
II
III
II
II
II
II
*For complete order number see pages 4 and 5.
44
QWL – accessories
10-10133X
cable sealing adapter
H
E
F
K*
B
D
OPTIONAL
LEFT HAND
A
G
C
A
SECTION A-A
Type I Straight
H
C
E
K*
B
F
D
OPTIONAL
LEFT HAND
G
Type II Step Down
H
E
K*
F
B
D
OPTIONAL
LEFT HAND
A
A
G
C
SECTION A-A
Type III Step Up
*Wire grip dimensions (K) apply to 10-101332 and 10-101334 assemblies only.
45
QWL – accessories
10-10133X
cable sealing adapter
All dimensions are for reference only.
Used
With
Shell
Size
Cable Range
G
Dia.
+.010
–.020
B
+.000
–.010
C
+.010
–.000
E
Free
Max.
F
K
Free
Approx.
Part
Number*
Max.
Dia.
Min.
Dia.
D Thread
Class 2B-LH
+.010
–.020
H
.045
Type
III
III
III
I
10-10133X-121
10-10133X-122
10-10133X-123
10-10133X-141
10-10133X-142
10-10133X-143
10-10133X-144
10-10133X-145
10-10133X-146
10-10133X-151
10-10133X-161
10-10133X-162
10-10133X-163
10-10133X-164
10-10133X-165
10-10133X-166
10-10133X-167
10-10133X-171
10-10133X-172
10-10133X-173
10-10133X-174
10-10133X-175
10-10133X-181
10-10133X-182
10-10133X-183
10-10133X-184
10-10133X-185
10-10133X-186
10-10133X-187
10-10133X-188
10-10133X-190
10-10133X-201
10-10133X-202
10-10133X-203
10-10133X-204
10-10133X-205
10-10133X-206
10-10133X-207
10-10133X-208
10-10133X-209
10-10133X-210
10-10133X-211
12S
12S
12S
14S
14S
14S
14S
14S
14S
14
.281
.500
.405
.337
.222
.281
.530
.463
.405
.405
.463
.589
.625
.405
.530
.699
.281
.589
.438
.625
.530
.405
.589
.625
.530
.699
.405
.455
.750
.172
.805
.625
.699
.500
.337
.828
.375
.281
.455
.589
.530
.900
.219
.406
.316
.281
.160
.219
.441
.406
.316
.316
.406
.511
.580
.316
.441
.605
.219
.511
.400
.580
.441
.316
.511
.580
.441
.605
.316
.361
.637
.078
.692
.580
.605
.406
.281
.715
.312
.219
.361
.511
.441
.791
.750
1.062
1.000
.750
.812
1.000
.812
.6250-24NEF
.6250-24NEF
.500
.562
.562
.500
.562
.500
.562
.500
.562
.562
.500
.562
.562
.562
.562
.562
.500
.562
.500
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.500
.562
.562
.562
.562
.500
.547
.500
.500
.562
.562
.562
.562
1.938
2.875
2.548
1.782
1.782
1.782
2.719
2.126
2.719
2.719
1.844
2.282
2.933
2.282
2.282
2.933
1.844
2.621
2.215
2.933
2.621
2.621
2.621
2.933
2.621
2.933
2.621
2.933
3.063
2.407
3.063
2.933
2.933
2.933
2.438
2.996
2.469
2.438
2.933
2.621
2.621
3.063
.812
.812
2.750
3.750
3.422
2.594
2.532
2.594
3.594
2.938
3.594
3.765
2.656
3.156
3.807
3.156
3.156
3.807
2.656
3.667
3.199
3.979
3.667
3.667
3.667
3.979
3.667
3.979
3.667
3.979
4.109
3.391
4.109
3.979
3.979
3.979
3.422
4.042
3.453
3.422
3.979
3.667
3.667
4.109
2.844
4.688
3.688
3.344
2.406
2.844
4.688
4.344
3.688
3.688
4.344
5.188
6.188
3.688
4.688
6.188
2.844
5.188
4.344
6.188
4.688
3.688
5.188
6.188
4.688
6.188
3.688
4.188
6.688
2.844
6.688
6.188
6.188
4.688
3.344
6.688
3.844
2.844
4.188
5.188
4.688
7.188
.6250-24NEF
.812
.812
.7500-20UNEF
.7500-20UNEF
.7500-20UNEF
.7500-20UNEF
.7500-20UNEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.1250-18NEF
1.1250-18NEF
1.1250-18NEF
1.1250-18NEF
1.1250-18NEF
1.1250-18NEF
1.1250-18NEF
1.1250-18NEF
1.1250-18NEF
1.1250-18NEF
.938
.625
.812
.938
II
.750
.812
.938
I
1.000
.875
.812
.938
III
III
III
III
I
.938
.938
1.000
1.000
.875
.812
.938
.812
.938
16S
16S
16S
16S
16S
16S
16S
16
.938
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.000
1.062
1.000
1.000
1.062
.750
1.062
1.125
1.062
1.062
1.125
.938
III
III
III
III
III
II
1.000
.875
1.062
.938
III
I
16
16
1.062
1.000
1.000
1.000
1.062
1.000
1.062
1.000
1.062
1.250
.750
1.125
1.062
1.062
1.062
1.125
1.062
1.125
1.062
1.125
1.000
.938
III
III
III
I
16
16
18
18
III
I
18
18
III
I
18
18
III
III
II
18
18
18
1.250
1.062
1.062
1.062
.750
1.000
1.125
1.125
1.125
1.125
1.250
1.125
1.125
1.125
1.125
1.125
1.250
III
I
20
20
I
20
I
20
II
20
1.125
.875
III
II
20
20
.750
II
20
1.062
1.000
1.000
1.250
I
20
II
20
II
20
III
*For complete order number see pages 4 and 5.
46
QWL – accessories
10-10133X
cable sealing adapter
All dimensions are for reference only.
Used
With
Shell
Size
Cable Range
G
Dia.
+.010
–.020
B
+.000
–.010
C
+.000
–.010
E
Free
.010
F
K
Free
Approx.
Part
Number*
Max.
Dia.
Min.
Dia.
D Thread
Class 2B-LH
+.010
–.020
H
.045
Type
II
10-10133X-221
10-10133X-222
10-10133X-223
10-10133X-224
10-10133X-225
10-10133X-226
10-10133X-227
10-10133X-228
10-10133X-229
10-10133X-231
10-10133X-241
10-10133X-242
10-10133X-243
10-10133X-244
10-10133X-245
10-10133X-246
10-10133X-247
10-10133X-248
10-10133X-249
10-10133X-281
10-10133X-282
10-10133X-283
10-10133X-284
10-10133X-285
10-10133X-286
10-10133X-287
10-10133X-288
10-10133X-289
10-10133X-290
10-10133X-291
10-10133X-292
10-10133X-293
10-10133X-294
10-10133X-295
10-10133X-321
10-10133X-322
10-10133X-323
10-10133X-324
10-10133X-325
10-10133X-326
10-10133X-327
10-10133X-328
10-10133X-329
10-10133X-330
10-10133X-331
10-10133X-332
22
22
22
22
22
22
22
22
22
22
24
24
24
24
24
24
24
24
24
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
32
32
32
32
32
32
32
32
32
32
32
32
.699
.750
.605
.637
.367
.875
.715
.791
.453
.984
.511
.958
.875
.453
.637
.791
.984
.316
.715
.692
1.005
.958
.791
.875
.535
.637
1.099
.984
1.200
1.105
.755
.857
.715
1.250
1.320
.692
.755
.984
.637
1.320
1.099
.312
.857
1.105
1.406
.875
1.250
1.200
1.062
1.250
1.062
1.500
1.125
1.250
1.125
1.500
1.000
1.500
1.500
1.125
1.250
1.250
1.500
1.000
1.125
1.250
1.750
1.500
1.250
1.500
1.250
1.250
1.750
1.500
1.750
1.750
1.500
1.250
1.125
2.000
2.000
1.250
1.500
1.500
1.250
2.000
1.750
.875
1.250
1.375
1.250
1.375
1.250
1.375
1.250
1.375
1.250
1.375
1.625
1.406
1.375
1.375
1.625
1.375
1.406
1.375
1.812
1.625
1.625
1.625
1.625
1.625
1.875
1.625
1.875
1.875
1.625
1.625
1.625
1.875
1.875
1.625
1.875
1.875
1.875
2.062
1.875
1.875
1.875
1.875
2.062
1.875
2.062
1.875
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.8750-16N
.562
.562
.562
.562
.594
.562
.594
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.547
.562
.562
.562
.562
.562
.562
.562
.672
.562
.500
.562
.562
.562
.562
.562
.562
2.933
3.059
2.933
3.121
2.996
3.059
2.996
3.121
2.750
3.121
3.121
2.996
3.059
3.059
3.121
2.750
2.996
3.059
3.204
3.121
3.059
3.121
3.059
3.059
3.184
3.121
3.184
3.184
3.121
3.059
2.954
3.184
3.184
3.059
3.121
3.121
3.059
3.246
3.184
2.766
3.059
3.184
3.246
3.121
3.246
3.184
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
3.979
4.105
3.979
4.167
4.072
4.105
4.074
4.167
3.796
4.167
4.167
4.042
4.105
4.105
4.167
3.796
4.042
4.105
4.250
4.167
4.105
4.167
4.105
4.105
4.230
4.167
4.230
4.230
4.167
4.090
4.000
4.230
4.230
4.105
4.167
4.167
4.105
4.292
4.230
3.750
4.105
4.230
4.292
4.167
4.292
4.230
6.188
6.688
4.188
7.188
6.688
7.188
5.188
7.688
5.188
7.688
7.188
5.188
6.688
7.188
7.688
3.688
6.688
6.688
7.188
7.688
7.188
7.188
5.688
6.688
8.188
7.688
8.688
8.188
6.688
7.188
6.688
9.688
9.688
6.688
6.688
7.688
6.688
9.688
8.188
3.844
7.188
8.188
10.688
7.188
9.688
8.688
III
II
.445
1.000
.828
III
I
.900
III
I
.562
1.101
.589
III
II
1.055
1.000
.562
III
III
II
.750
I
.900
I
1.101
.405
III
II
.828
II
.805
I
1.130
1.055
.900
III
I
II
1.000
.630
I
II
.750
II
1.180
1.101
1.310
1.230
.880
III
I
III
III
I
.957
II
.828
II
1.375
1.445
.805
III
III
II
.880
II
1.101
.750
1.8750-16N
II
1.8750-16N
II
1.445
1.180
.375
1.8750-16N
III
I
1.8750-16N
1.8750-16N
II
.957
1.250
1.750
2.000
1.500
2.000
1.750
1.8750-16N
II
1.230
1.530
1.000
1.375
1.310
1.8750-16N
I
1.8750-16N
III
II
1.8750-16N
1.8750-16N
III
I
1.8750-16N
.580 x
.825
.500 x
.705
10-10133X-333
10-10133X-334
32
32
(Oval)
(Oval)
1.500
1.500
1.875
1.875
1.8750-16N
1.8750-16N
.562
.562
3.121
3.121
2.062
2.062
4.167
4.167
6.688
6.688
II
II
*For complete order number see pages 4 and 5.
47
QWL – accessories
10-10133X
cable sealing adapter
All dimensions are for reference only.
Used
With
Shell
Size
Cable Range
G
Dia.
+.010
–.020
B
+.000
–.010
C
+.000
–.010
E
Free
.035
F
K
Free
Approx.
Part
Number*
Max.
Dia.
Min.
Dia.
D Thread
Class 2B-LH
+.010
–.020
H
.045
Type
II
10-10133X-335
10-10133X-336
10-10133X-337
10-10133X-361
10-10133X-362
10-10133X-363
10-10133X-364
10-10133X-365
10-10133X-366
10-10133X-367
10-10133X-368
10-10133X-369
10-10133X-370
10-10133X-371
10-10133X-372
10-10133X-373
10-10133X-374
10-10133X-375
10-10133X-376
10-10133X-377
10-10133X-378
10-10133X-379
10-10133X-401
10-10133X-402
10-10133X-403
10-10133X-404
10-10133X-405
10-10133X-406
10-10133X-407
10-10133X-408
10-10133X-409
10-10133X-410
10-10133X-411
10-10133X-412
10-10133X-413
10-10133X-414
10-10133X-415
10-10133X-416
10-10133X-417
10-10133X-418
10-10133X-441
10-10133X-442
10-10133X-443
10-10133X-445
10-10133X-446
10-10133X-449
10-10133X-481
10-10133X-482
10-10133X-483
10-10133X-484
32
32
32
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
44
44
44
44
44
44
48
48
48
48
.530
.680
.441
.567
1.000
1.250
.875
1.625
1.875
1.875
2.062
2.062
2.062
2.062
2.062
2.062
2.312
2.062
2.062
2.312
2.062
2.312
2.062
2.312
2.312
1.875
2.062
2.062
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.500
2.500
2.500
2.500
2.312
2.500
2.500
2.500
2.125
2.312
2.312
2.250
2.625
2.625
2.625
2.625
2.500
2.562
2.812
2.969
2.750
2.750
1.8750-16N
1.8750-16N
1.8750-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.8750-16N
2.8750-16N
2.8750-16N
2.8750-16N
.562
.562
.500
.562
.562
.562
.562
.562
.562
.562
.562
.672
.500
.500
.672
.562
.562
.672
.562
.562
.562
.562
.562
.562
.438
.562
.562
.562
.672
.672
.672
.672
.562
.672
.672
.672
.562
.562
.562
.562
.672
.672
.672
.562
.562
.562
.562
.672
.672
.672
2.875
3.059
2.766
3.121
3.246
3.246
3.184
3.059
3.121
3.308
3.121
3.059
3.500
2.813
3.500
3.246
3.308
3.500
2.875
3.184
3.184
3.308
3.184
3.308
3.121
3.308
3.246
3.184
3.469
3.469
3.469
3.469
3.246
3.500
3.500
3.500
3.063
3.184
3.121
3.063
3.609
3.547
3.609
3.969
3.905
4.031
3.203
4.281
4.406
4.406
2.062
2.062
2.062
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.875
2.875
2.875
2.875
2.875
2.875
3.125
3.125
3.125
3.125
3.921
4.105
3.750
4.167
4.292
4.688
6.688
4.344
7.688
9.688
II
.463
.406
II
1.055
1.445
1.530
1.230
.750
.958
1.500
2.000
2.000
1.750
1.250
1.500
2.250
1.500
1.250
2.438
.875
II
1.320
1.406
1.105
.637
I
4.292 10.688
I
4.230
4.105
4.167
8.188
6.688
6.688
II
II
.880
.755
II
1.656
1.101
.957
1.531
.984
4.354 12.688
III
II
4.167
4.090
7.688
7.188
.857
II
1.900
.375
1.775
.312
4.656 13.688
3.797 3.844
4.656 13.688
4.292 9.688
III
II
1.825
1.375
1.562
1.730
.530
1.700
1.250
1.437
1.605
.441
2.438
2.000
2.250
2.438
1.000
1.750
1.750
2.250
1.750
2.250
1.500
2.250
2.000
1.750
2.438
2.438
2.438
2.438
2.000
2.750
2.750
2.750
1.250
1.750
1.500
1.250
2.750
2.750
2.750
1.750
1.500
2.000
2.438
2.750
2.750
2.750
III
I
4.354 11.188
4.656 13.688
III
III
II
3.921
4.230
4.230
4.688
7.188
8.188
1.130
1.180
1.595
1.310
1.656
1.101
1.562
1.375
1.180
1.900
1.730
1.825
1.984
1.445
2.062
2.100
2.145
.957
1.005
1.055
1.470
1.200
1.531
.984
II
II
4.354 11.688
4.230 8.688
4.354 12.688
4.167 7.688
4.354 11.188
III
II
I
II
1.437
1.250
1.099
1.775
1.605
1.700
1.859
1.320
1.937
1.955
2.000
.857
I
4.292
4.230
9.688
8.188
II
II
4.625 13.688
4.625 13.688
4.625 13.688
4.625 13.688
III
III
III
III
II
4.292
9.688
4.656 14.188
4.656 14.188
4.656 14.188
III
III
III
II
4.109
4.230
4.167
4.109
7.188
8.188
7.688
6.688
1.230
1.055
.630
1.103
.958
II
II
.567
II
2.170
2.145
2.250
1.130
1.109
1.445
1.900
2.000
2.250
2.170
2.025
2.000
2.105
1.005
.984
4.953 17.188
4.891 14.188
4.953 17.188
III
III
III
II
5.203
5.140
5.265
7.188
7.688
9.688
II
1.320
1.775
1.867
2.105
2.025
II
4.547 13.688
5.625 14.188
5.750 17.188
5.750 17.188
II
II
I
I
*For complete order number see pages 4 and 5.
48
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
H
E
F
B
K
D
LEFT HAND
A
A
G
C
SECTION A-A
Type I Straight
H
C
E
F
K*
Optional
B
D
LEFT HAND
G
Type II Step Down
H
E
F
K*
Optional
B
D
LEFT HAND
A
A
G
C
SECTION A-A
Type III Step Up
49
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
All dimensions are for reference only.
Used
With
Shell
Size
Cable Range
G
Dia.
+.010
–.020
B
+.000
–.010
C
+.010
–.000
E
Free
.035
F
K
Free
Approx.
Part
Number*
Max.
Dia.
Min.
Dia.
D Thread
Class 2B-LH
+.010
–.020
H
.045
Type
I
10-113637-141
10-113637-142
10-113637-143
10-113637-144
10-113637-171
10-113637-172
10-113637-181
10-113637-201
10-113637-202
10-113637-203
10-113637-221
10-113637-222
10-113637-223
10-113637-224
10-113637-225
10-113637-241
10-113637-242
10-113637-243
10-113637-244
10-113637-245
10-113637-246
10-113637-281
10-113637-282
10-113637-283
10-113637-284
10-113637-285
10-113637-286
10-113637-287
10-113637-288
10-113637-289
10-113637-290
10-113637-291
10-113637-292
10-113637-293
10-113637-294
10-113637-295
14S
14S
14S
14S
16
16
18
20
20
20
22
22
22
22
22
24
24
24
24
24
24
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
.337
.405
.281
.316
.441
.406
.605
.441
.715
.637
.875
.791
.637
.605
.958
.715
.511
.857
.637
.984
.875
1.055
.692
.875
1.775
1.250
.637
.984
1.005
.791
1.320
1.099
.958
.857
1.200
.441
1.105
.535
.750
1.000
1.000
.875
.750
1.000
1.000
.938
.7500-20UNEF
.7500-20UNEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.1250-18NEF
1.1250-18UNEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.2500-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.3750-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
1.6250-18NEF
.500
.562
.562
.500
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.672
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
.562
5.282
5.500
5.500
5.344
5.563
5.500
6.657
6.000
6.750
6.000
6.000
5.063
6.750
5.625
5.500
6.000
6.000
6.750
6.750
6.813
6.000
6.750
8.125
6.875
5.750
6.750
6.813
5.750
6.875
6.812
6.750
5.750
6.813
6.500
6.813
5.750
.938
.938
6.094
6.374
6.374
6.156
6.609
6.546
7.703
7.046
7.796
7.046
7.046
6.109
7.796
6.671
6.546
7.046
7.046
7.796
7.796
7.859
7.046
7.796
9.281
7.921
6.796
7.796
7.859
6.796
7.921
7.858
7.796
6.796
7.859
7.546
7.859
6.796
3.344
3.688
4.688
4.344
6.188
4.688
6.688
6.688
7.188
7.188
6.688
6.188
7.688
6.688
5.188
7.188
6.688
7.688
7.188
8.188
6.688
7.188
13.688
9.688
6.688
7.688
7.188
7.188
9.688
8.188
7.688
7.188
8.688
4.688
8.188
5.688
III
III
III
III
III
III
III
III
III
III
II
.530
.938
.463
.938
.699
1.062
1.000
1.125
1.250
1.500
1.250
1.250
1.062
1.500
1.125
1.000
1.250
1.250
1.500
1.500
1.750
1.250
1.500
2.438
2.000
1.250
1.500
1.750
1.250
2.000
1.750
1.500
1.250
1.750
1.000
1.750
1.250
1.125
1.000
1.250
1.312
1.625
1.312
1.312
1.312
1.625
1.250
1.250
1.375
1.375
1.625
1.625
1.812
1.375
1.562
2.438
2.000
1.562
1.562
1.875
1.562
2.000
1.875
1.562
1.562
1.875
1.625
1.875
1.562
1.062
1.062
1.188
1.312
1.312
1.312
1.438
1.438
1.438
1.438
1.438
1.562
1.562
1.562
1.562
1.562
1.562
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
.530
.828
.750
.984
.900
.750
.699
1.055
1.828
.589
III
I
II
.957
I
.750
I
1.101
1.000
1.180
.805
III
III
III
I
1.000
1.900
1.375
.750
I
III
III
II
1.101
1.130
.900
I
III
II
1.427
1.180
1.055
.957
III
III
I
II
1.310
.530
III
II
1.230
.630
III
II
*For complete order number see pages 4 and 5.
50
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
All dimensions are for reference only.
Used
With
Shell
Size
Cable Range
G
Dia.
+.010
–.020
B
+.000
–.010
C
+.010
–.000
E
Free
.035
F
K
Free
Approx.
Part
Number*
Max.
Min.
Dia.
D Thread
Class 2B-LH
+.010
–.020
H
.045
Dia.
Type
10-113637-321
10-113637-322
10-113637-323
10-113637-324
10-113637-325
10-113637-326
10-113637-327
10-113637-328
10-113637-361
10-113637-362
32
32
32
32
32
32
32
32
36
36
.828
.715
1.200
1.005
1.250
1.320
1.099
1.531
.857
1.125
1.750
1.750
2.000
2.000
1.750
2.250
1.250
2.000
1.500
1.844
1.812
1.812
2.000
2.000
1.812
2.250
1.844
2.000
2.000
1.8750-16N
1.8750-16UN
1.8750-16UN
1.8750-16UN
1.8750-16UN
1.8750-16UN
1.8750-16UN
1.8750-16UN
2.0625-16N
2.0625-16N
.594
.562
.562
.562
.562
.562
.562
.562
.562
.562
7.625
6.812
6.812
7.875
7.875
6.812
7.141
6.688
6.875
6.750
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.312
2.312
8.703
7.858
7.858
8.921
8.921
7.858
8.187
7.734
7.921
7.796
6.688
8.688
7.188
9.688
9.688
8.188
12.688
7.188
9.688
7.188
II
I
1.310
1.130
1.375
1.445
1.180
1.656
.970
I
III
III
I
III
II
I
1.375
1.000
1.920 x
1.250
.875
II
1.920 x
10-113637-363
36
2.438
2.438
2.0625-16N
.672
8.125
2.312
9.281
13.688
III
1.140 oval 1.140 oval
10-113637-364
10-113637-365
10-113637-366
10-113637-367
10-113637-368
10-113637-369
10-113637-370
10-113637-371
10-113637-401
10-113637-402
10-113637-403
10-113637-404
10-113637-405
10-113637-406
10-113637-407
10-113637-408
10-113637-410
10-113637-411
10-113637-412
10-113637-413
10-113637-414
10-113637-415
10-113637-416
10-113637-417
36
36
36
36
36
36
36
36
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
1.230
1.562
1.656
1.445
1.825
1.895
1.730
1.310
1.906
1.940
1.900
1.825
1.310
1.180
1.230
1.656
2.145
1.984
1.940
1.984
2.100
1.562
1.445
1.375
1.105
1.437
1.531
1.320
1.700
1.775
1.605
1.200
1.761
1.815
1.775
1.700
1.200
1.099
1.105
1.531
2.000
1.859
1.815
1.859
1.955
1.437
1.320
1.250
1.750
2.250
2.250
2.000
2.438
2.438
2.438
1.750
2.750
2.438
2.438
2.438
1.750
1.750
1.750
2.250
2.750
2.438
2.438
2.438
2.750
2.250
2.000
2.000
2.000
2.250
2.250
2.000
2.500
2.438
2.438
2.000
2.438
2.438
2.438
2.438
2.250
2.250
2.250
2.250
2.438
2.438
2.438
2.438
2.625
2.250
2.312
2.312
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.0625-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
2.3125-16N
.562
.562
.562
.562
.672
.672
.672
.562
.672
.672
.672
.672
.562
.562
.562
.562
.672
.672
.672
.672
.672
.562
.562
.562
6.813
6.938
6.938
6.875
9.125
8.125
8.125
6.813
8.125
8.125
8.125
8.125
7.813
7.813
7.813
7.938
8.125
8.125
11.125
11.125
12.000
7.938
6.875
6.875
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
7.859
7.984
7.984
7.921
9.281
9.281
9.281
7.859
9.281
9.281
9.281
9.281
8.859
8.859
8.859
8.984
9.281
9.281
8.188
11.188
11.188
9.688
II
III
III
I
13.688
13.688
13.688
8.688
III
III
III
II
14.188
13.688
13.688
13.688
8.688
III
III
III
III
II
8.188
II
8.188
II
11.188
14.188
13.688
I
III
III
III
III
III
I
12.281 13.688
12.281 13.688
13.156 14.188
8.984
7.921
7.921
11.188
9.688
9.688
II
II
*For complete order number see pages 4 and 5.
51
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
All dimensions are for reference only.
Used
With
Shell
Size
Cable Range
G
Dia
+.010
–.020
B
+.000
–.010
C
+.010
–.000
E
Free
.035
F
K
Part
Number*
Max
Dia
Min
Dia
D Thread
Class 2B-LH
+.010
–.020
H
.045
Free†
Approx.
Type
III
III
III
II
10-113637-441
10-113637-442
10-113637-443
10-113637-444
10-113637-445
10-113637-446
10-113637-447
10-113637-448
10-113637-449
10-113637-450
10-113637-481
10-113637-482
10-113637-483
10-113637-484
10-113637-485
10-113637-486
44
44
44
44
44
44
44
44
44
44
48
48
48
48
48
48
2.100
2.250
2.000
1.500
1.730
.750
1.955
2.105
1.867
1.375
1.605
.637
2.750
2.750
2.750
2.250
2.438
1.250
2.438
2.750
2.750
2.000
2.750
2.875
2.875
2.750
2.750
2.250
2.750
2.875
2.750
2.500
2.750
2.625
2.750
2.750
2.875
2.625
2.750
2.875
2.875
2.875
2.875
2.750
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.6250-16UN
2.8750-16N
2.8750-16N
2.8750-16N
2.8750-16N
2.8750-16N
2.8750-16UN
.672
.672
.672
.562
.672
.562
.672
.672
.672
.562
.672
.672
.672
.672
.672
.562
8.125
8.188
8.125
7.938
8.125
6.688
8.125
8.125
8.188
7.875
8.188
8.188
8.188
8.125
8.125
7.937
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
3.125
3.125
3.125
3.125
3.125
3.125
9.469
9.531
9.469
9.171
9.469
7.921
9.469
9.469
9.532
9.109
9.532
9.532
9.532
9.469
9.469
9.171
14.188
17.188
14.188
11.188
13.688
6.688
II
II
1.825
2.145
2.170
1.375
2.250
2.500
2.375
2.145
2.000
1.656
1.700
2.000
2.025
1.250
2.105
2.355
2.230
2.000
1.867
1.531
13.688
14.188
17.188
9.688
II
III
III
II
14.688
18.188
18.188
14.188
14.188
12.688
I
III
III
II
II
II
*For complete order number see pages 4 and 5.
52
QWL – accessories
adapter, cable clamp
10-113196-XX
adapter
L
V
D
C
F
E
A
10-749XX-(
)
cable clamp
Z
W
Y
This cable clamp is designed to be used with specific QWL insert arrangements. The locations,
quantity, and sizes of holes in the clamp grommet must correspond to those in the connector for an
effective moisture seal without wire crossing. Contact Amphenol, Sidney, NY, for grommet avail-
ability. Example: 10-107618-4P must use 10-74918-4 clamp.
53
QWL – accessories
adapter, cable clamp, sealing plugs
All dimensions for reference only.
D
Dia.
E
Dia.
W
Min.
Adapter
Part
Number*
Clamp
Part
Number*
C
+.010
–.000
Shell
Size
A Thread
Class 2A
+.010
–.020
+.010
–.020
F
.010
L
.010
V Thread
Class 2B-LH
Thd.
Engage
Y
Max.
Z
Max.
10S
12S
12
10-113196-10
10-113196-12
10-113196-13
10-113196-14
10-113196-15
10-113196-16
10-113196-17
10-113196-18
10-113196-20
10-113196-22
10-113196-24
10-113196-28
10-113196-32
10-113196-36
10-113196-40
10-74910-( )
10-74912-( )
10-74913-( )
10-74914-( )
10-74915-( )
10-74916-( )
10-74917-( )
10-74918-( )
10-74920-( )
10-74922-( )
10-74924-( )
10-74928-( )
10-74932-( )
10-74936-( )
10-74940-( )
.500-28UNEF
.625-24NEF
.203
.328
.922
.969
.625
.750
.562
.688
1.234
1.281
1.438
1.406
1.438
1.406
1.500
1.625
1.578
1.625
1.578
1.719
1.688
1.750
1.750
.500-28UNEF
.625-24NEF
.625-24NEF
.750-20UNEF
.750-20UNEF
.875-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18NEF
1.250-18NEF
1.375-18NEF
1.625-18NEF
1.875-16N
.519
.519
.519
.519
.519
.519
.519
.519
.505
.519
.519
.519
.519
.738
.738
.807
.901
.529
.524
.524
.524
.524
.524
.524
.556
.666
.666
.666
.666
.805
.805
.805
.625-24NEF
.328
.954
.750
.688
.901
14S
14
.750-20UNEF
.750-20UNEF
.875-20UNEF
.875-20UNEF
1.000-20UNEF
1.1875-18NEF
1.1875-18NEF
1.4375-18NEF
1.4375-18NEF
1.7500-18NS
2.000-18NS
.453
1.094
.954
.875
.812
1.026
1.026
1.119
1.119
1.229
1.479
1.479
1.666
1.666
2.135
2.260
2.510
.453
.875
.812
16S
16
.578
1.094
1.016
1.141
1.094
1.141
1.094
1.235
1.204
1.266
1.266
1.000
1.000
1.188
1.312
1.438
1.562
1.812
2.062
2.250
2.500
.938
.578
.938
18
.676
1.062
1.250
1.250
1.500
1.500
1.875
2.125
2.375
20
.801
22
.906
24
1.016
1.130
1.438
1.678
1.914
28
32
36
2.0625-16N
40
2.2500-16UN
2.3125-16N
*For complete order number see page 5. Clamp 10-749XX-( ) has a bright cadmium finish. An olive drab cadmium plate finish is available
by order number 71-749XX-( ). To complete clamp order number, add connector insert arrangement number.
B
DIA
C
.135 +.030
–.025
A
DIA
45
˚
SEALING PLUG
MS27488-XX
10-405996-XX
A
Dia.
Contact
Size
MS
Number
Wire
Size
Color
Code
B
.005
C
.010
Order No.
.010
.083
.121
.185
.310
.440
10-405996-16
10-405996-12
10-405996-8
10-405996-4
10-405996-0
16
12
8
27488-16
27488-12
27488-8
27488-4
27488-0
20-16
14-12
10-8
4-6
Blue
Yellow
White
Blue
.133
.171
.315
.415
.605
.564*
.564*
.470
4
.470
0
0-2
Yellow
1.000
* .020
Sealing plugs are used to fill unused holes in multi-holed grommet configurations
54
QWL – accessories
adapter, cable clamp
10-113138-XX
adapter
L
C
D
V
LEFT HAND
F
E
A
B
M85049/2-( )C
cable clamp
M
Y
K
A
55
QWL – accessories
adapter, cable clamp, sleeve
K Dia
Cable Range
Adapter
Part
Number*
Clamp
MS Part
Number*
A Thread
Class 2A
(Plated)
B Min C Dia
E Dia
+.010
–.020
V
Shell
Size
Full
Thd
+.000
–.010
D
.020
F
.010
L
M
Max
Thread
Class 2B-LH
Y
Max
Free Closed Max
10-113138-12
10-113138-13
M85049/2-4C
M85049/2-4C
.625-24UNEF
.625-24NEF
.422
.422
.386
.386
1.078
1.125
.750
.750
.688
.688
1.390
.625-24NEF
.625-24NEF
12
14
16
.302
.428
.515
.094
.230
.316
1.375
1.375
1.375
.906
1.031
1.125
1.609
10-113138-14
10-113138-15
M85049/2-6C
M85049/2-6C
.750-20UNEF
.750-20UNEF
.422
.422
.500
.500
1.078
1.125
.875
.875
.812
.812
1.390
1.609
.750-20UNEF
.750-20UNEF
10-113138-16
10-113138-17
M85049/2-8C
M85049/2-8C
.875-20UNEF
.875-20UNEF
.422
.422
.625
.625
1.078
1.125
1.000
1.000
.938
.938
1.390
1.609
.875-20UNEF
.875-20UNEF
18
20
22
24
28
32
36
40
44
10-113138-18
10-113138-20
10-113138-22
10-113138-24
10-113138-28
10-113138-32
10-113138-36
10-113138-40
10-113138-44
M85049/2-10C
M85049/2-12C
M85049/2-12C
M85049/2-16C
M85049/2-16C
M85049/2-20C
M85049/2-24C
M85049/2-28C
M85049/2-32C
1.000-20UNEF
1.1875-18UNEF
1.1875-18NEF
1.4375-18UNEF
1.4375-18NEF
1.750-18UNS
2.000-18UNS
2.250-16UN
.422
.422
.422
.422
.422
.484
.562
.562
.562
.752
.891
1.125
1.125
1.125
1.125
1.297
1.297
1.297
1.297
1.297
1.188
1.312
1.438
1.562
1.812
2.062
2.250
2.500
2.812
1.062
1.250
1.250
1.500
1.500
.614
.738
.738
.926
.926
.378 1.609 1.437
.445 1.609 1.437
.445 1.609 1.437
.611 1.609 1.562
.611 1.781 1.562
.922 1.781 1.812
.922 1.781 2.062
1.000-20UNEF
1.125-18NEF
1.250-18NEF
1.375-18NEF
1.625-18NEF
1.875-16UN
2.0625-16N
2.3125-16N
2.625-16UN
1.234
1.484
1.484
1.671
1.671
2.188
2.344
2.594
2.812
.891
1.111
1.111
1.422
1.672
1.914
2.142
1.875 1.200
2.125 1.363
2.375 1.611 1.180 1.781 2.062
2.625 1.865 1.427 1.781 2.188
2.500-16UN
Z Dia
Sleeve
MS Part
Number
D
Dia.
.016
Shell
Size
Free
.016
Closed
12
MS3420-4A
.302
.219
.010
MS3420-4A
MS3420-6A
.302
.427
.219
.312
.020
.114
14
MS3420-6A
MS3420-8A
.427
.531
.312
.438
.085
.220
16
18
20
22
MS3420-6A
MS3420-10A
.427
.615
.312
.438
.085
.200
MS3420-( )A
sleeve
MS3420-10A
MS3420-12A
.615
.740
.438
.541
.177
.270
MS3420-10A
MS3420-12A
.615
.740
.438
.541
.177
.270
MS3420-8A
MS3420-12A
MS3420-16A
.531
.740
.927
.438
.541
.750
.186
.260
.433
.031
2.000
24
26
32
36
40
44
Z
MS3420-8A
MS3420-12A
MS3420-16A
.531
.740
.927
.438
.541
.750
.186
.260
.433
D
MS3420-12A
MS3420-16A
MS3420-20A
.740
.927
1.240
.541
.750
.938
.273
.442
.620
MS3420-16A
MS3420-20A
MS3420-24A
.927
1.240
1.365
.750
.938
1.125
.358
.504
.682
MS3420-16A
MS3420-20A
MS3420-28A
.927
1.240
1.614
.750
.938
1.250
.368
.514
.816
MS3420-20A
MS3420-28A
MS3420-32A
1.240
1.614
1.865
.938
1.250
1.625
.638
.897
1.229
Sleeve not supplied as part of MS3057-( )C assembly.
Order separately by part number shown.
56
QWL – accessories
protection caps
10-101046-( ), 10-101531-(
plug protective covers
)
10-101046
L
E
F
C
A
10-101531
B
10-101063-( ), 10-101048-(
receptacle protective covers
)
10-101063
E
L
A
D
C
10-101048
B
57
QWL – accessories
protection caps
All dimensions for reference only.
B
Dia
+.010
–.000
Without
Eyelet End
Part Number*
With
Eyelet End
Part Number*
F
Flat
.010
Shell
Size
A Thread
Class 2A
C
E
L
Max.
Approx. Approx.
10
12
14
16
18
20
22
24
28
32
36
40
44
48
10-101046-10
10-101046-12
10-101046-14
10-101046-16
10-101046-18
10-101046-20
10-101046-22
10-101046-24
10-101046-28
10-101046-32
10-101046-36
10-101046-40
10-101046-44
10-101046-48
10-101531-10
10-101531-12
10-101531-14
10-101531-16
10-101531-18
10-101531-20
10-101531-22
10-101531-24
10-101531-28
10-101531-32
10-101531-36
10-101531-40
10-101531-44
10-101531-48
.6250-0.05P-0.1L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.1250-0.1P-0.2L-DS
1.2500-0.1P-0.2L-DS
1.3750-0.1P-0.2L-DS
1.5000-0.1P-0.2L-DS
1.7500-0.1P-0.2L-DS
2.0000-0.1P-0.2L-DS
2.2500-0.1P-0.2L-DS
2.5000-0.1P-0.2L-DS
2.7500-0.1P-0.2L-DS
3.0000-0.1P-0.2L-DS
.125
.125
.125
.140
.140
.193
.193
.193
.193
.193
.193
.193
.193
.193
3.000
3.500
3.500
3.500
3.500
4.000
4.000
4.500
4.500
5.000
5.000
5.000
6.000
6.000
3.375
3.875
3.875
3.875
4.000
4.500
4.500
5.000
5.000
5.500
5.500
5.500
6.000
6.000
.500
.625
1.250
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
.750
.875
1.000
1.062
1.125
1.250
1.500
1.750
2.000
2.250
2.500
2.750
*For complete order number see page 5.
All dimensions for reference only.
B
Dia.
+.010
–.000
Without
Eyelet End
Part Number*
With
Eyelet End
Part Number*
D
Dia.
Max.
Shell
Size
A Thread
Class 2B
C
E
L
Max.
Approx.
Approx.
10
12
14
16
18
20
22
24
28
32
36
40
44
48
10-101063-10
10-101063-12
10-101063-14
10-101063-16
10-101063-18
10-101063-20
10-101063-22
10-101063-24
10-101063-28
10-101063-32
10-101063-36
10-101063-40
10-101063-44
10-101063-48
10-101048-10
10-101048-12
10-101048-14
10-101048-16
10-101048-18
10-101048-20
10-101048-22
10-101048-24
10-101048-28
10-101048-32
10-101048-36
10-101048-40
10-101048-44
10-101048-48
.6250-0.05P-0.1L-DS
.7500-0.1P-0.2L-DS
.8750-0.1P-0.2L-DS
1.0000-0.1P-0.2L-DS
1.1250-0.1P-0.2L-DS
1.2500-0.1P-0.2L-DS
1.3750-0.1P-0.2L-DS
1.5000-0.1P-0.2L-DS
1.7500-0.1P-0.2L-DS
2.0000-0.1P-0.2L-DS
2.2500-0.1P-0.2L-DS
2.5000-0.1P-0.2L-DS
2.7500-0.1P-0.2L-DS
3.0000-0.1P-0.2L-DS
.140
.140
.140
.140
.193
.193
.193
.193
.193
.193
.193
.193
.193
.193
3.000
3.500
3.500
3.500
3.500
4.000
4.000
4.500
4.500
5.000
5.000
5.000
6.000
6.000
.844
.969
3.375
3.875
3.875
3.875
4.000
4.500
4.500
5.000
5.000
5.500
5.500
5.500
6.000
6.000
.750
.750
.750
.750
.969
.969
.969
.969
.969
.969
.969
.969
.969
.969
1.094
1.219
1.344
1.469
1.562
1.688
1.938
2.219
2.469
2.719
2.969
3.219
*For complete order number see page 5.
58
QWL – accessories
flange gasket, grip banding clamp
R
(TP)
.031 ,010 (10-36675)
.031 .005 (10-40450)
10-36675-(
10-40450-(
)
)
flange gaskets
R
(TP)
S
F
T
4 HOLES
All dimensions for reference only.
F
Dia.
S
T
Part
Number*
Part
Number*
Shell
+.016
–.000
R
.010
+.016
–.000
Dia.
.010
Size
10
12
14
16
18
20
22
24
28
32
36
40
44
48
10-36675-10
10-36675-12
10-36675-14
10-36675-16
10-36675-18
10-36675-20
10-36675-22
10-36675-24
10-36675-28
10-36675-32
10-36675-36
10-36675-40
10-36675-44
10-36675-48
10-40450-10
10-40450-12
10-40450-14
10-40450-16
10-40450-18
10-40450-20
10-40450-22
10-40450-24
10-40450-28
10-40450-32
10-40450-36
10-40450-40
10-40450-44
10-40450-48
.625
.750
.719
.813
1.000
1.094
1.188
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
3.000
3.250
.172
.172
.172
.172
.203
.203
.203
.203
.203
.219
.219
.219
.219
.219
.875
.906
1.000
1.125
1.250
1.375
1.500
1.750
2.000
2.188
2.438
2.688
2.938
.969
1.063
1.156
1.250
1.375
1.563
1.750
1.938
2.188
2.375
2.625
*For complete order number see page 5.
All dimensions for reference only.
10-183249-(
grip banding clamp
)
A Dia.
Part
Number*
Max.
1.125
1.312
1.500
1.688
1.875
2.062
2.250
2.438
2.625
2.812
3.000
Min.
.812
10-183249-10
10-183249-11
10-183249-12
10-183249-13
10-183249-14
10-183249-15
10-183249-16
10-183249-17
10-183249-18
10-183249-19
10-183249-20
.938
1.125
1.312
1.500
1.688
1.875
2.062
2.250
2.438
2.625
.375
REF.
A
*For complete order number see page 5.
59
QWL
crimp contacts
Machined from copper alloy and silver-plated for maximum corrosion resistance, with a
minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12
socket contacts are of the closed entry design. Crimp contacts are available for all MS
insert arrangements and are identified with an Amphenol® proprietary number.
MS/STANDARD CRIMP CONTACTS
TABLE I
CONTACT ARRANGEMENT SERVICE RATING
Mating Wire
Allowable
Wire
Size
Required
Wire Adapter Current**
Test
Part
Number
Pin/
Socket
End
Size
Barrel
Size
Recommended
Operating Voltage*
Sleeve
Amps
Effective
MS
Service
Rating
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.
at Sea Level
10-40553
Pin
16
18
20
22*
13
10
7.5
5
16
Short†
DC
AC (RMS)
200
16
16
12
10-40552 or
10-597109-161 Socket
Inst.
A
250
700
1/16
1/8
10-74696-6
10-74696-6
500
1/16
1/8
10-40557
Pin
16
18
20
22*
13
10
7.5
5
16
Long
D
1250
1750
2450
4200
900
3/16
1/4
10-40556 or
10-597109-171 Socket
E
1250
1750
3000
3/16
1/4
B
5/16
1
10-40561
Pin
12
23
C
5/16
12
10-40560 or
10-597109-131 Socket
* The values listed in Table I represent operating values which include a gen-
erous safety factor. It may be necessary for some applications to exceed
the operating voltages listed here. If this is necessary, designers will find
Table II useful for determining the degree to which the recommended val-
ues of Table I can be exceeded.
14
17
10-40792
10-40793
Pin
Socket
8
10*
46
33
8
4
8
4
10-74696-1
10-74696-2
10-40564
10-40565
Pin
Socket
4
6*
80
60
10-40562 or
10-581806
10-40563 or
10-581808
Pin
0
150
0
0
Socket
2*
10-74696-7
100
* When using wire adapter sleeve shown.
** Contact ratings as stated are test ratings only. The connector could not withstand full
rated current through all contacts continuously. Please note that the electrical data
given is not an establishment of electrical safety factors. This is left entirely in the
designer’s hands as he can best determine which peak voltage, switching surges,
transients, etc. can be expected in a particular circuit.
†
The 12S, 14S and 16S connectors require short contacts.
TABLE II
ALTITUDE VOLTAGE DERATING** CHART
Nominal
Distance
Standard Sea
Level Conditions
Pressure Altitude†
50,000 Feet
Pressure Altitude†
70,000 Feet
Minimum
Flashover
Voltage
Minimum
Flashover
Voltage
Minimum
Flashover
Voltage
Test
Voltage
AC (RMS)
MS
Service
Rating
Test
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Airspace
Creepage
AC (RMS)
AC (RMS)
AC (RMS)
Inst.
A
1/32
1/16
1/8
1/16
1/8
1400
2800
3600
4500
5700
8500
1000
2000
2800
3500
4500
7000
500
800
400
600
675
750
825
975
325
450
500
550
600
700
260
360
400
440
480
560
D
3/16
1/4
900
E
3/16
1/4
1000
1100
1300
B
5/16
1
C
5/16
†
Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer
must determine his own operating voltage by the application of a safety factor to
the above derating chart to compensate for circuit transients, surges, etc.
60
QWL
solder contacts
Machined copper alloy contacts in a full range of sizes, with closed entry
socket design in the size 12 and 16 contacts. A heavy silver-plated fin-
ish is deposited on all MS style solder contacts for maximum corrosion
resistance, maximum current carrying capacity and low millivolt drop.
MS/STANDARD SOLDER CONTACTS*
TABLE I
CONTACT ARRANGEMENT SERVICE RATING
Mating
End
Size
Wire
Barrel
Size
Allowable
Wire
Size
Test
Current**
Amps
Part
Number
Pin/
Socket
Recommended
Operating Voltage*
Effective
MS
Service
Rating
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.
at Sea Level
16
18
20
22
13
10
7.5
5
10-40569
Pin
16
Short†
DC
AC (RMS)
200
16
16
10-597107-161 Socket
10-40599 Pin
10-597107-171 Socket
10-33646 Pin
10-597107-131 Socket
Inst.
A
250
700
1/16
1/8
3/16
1/4
500
1/16
1/8
16
18
20
22
13
10
7.5
5
D
1250
1750
2450
4200
900
16 Long
E
1250
1750
3000
3/16
1/4
B
5/16
1
12
14
23
17
12
8
12
8
C
5/16
* The values listed in Table I represent operating values which include a gen-
erous safety factor. It may be necessary for some applications to exceed
the operating voltages listed here. If this is necessary, designers will find
Table II useful for determining the degree to which the recommended val-
ues of Table I can be exceeded.
10-35531
Pin
8
10
46
33
10-35532
10-35529
Socket
Pin
4
6
80
60
4
4
10-35530
10-35527
Socket
Pin
0
1
2
150
125
100
0
0
10-35528
Socket
* Solder Wells Filled
** Contact ratings as stated are test ratings only. The connector could not with-
stand full rated current through all contacts continuously. Please note that the
electrical data given is not an establishment of electrical safety factors. This is
left entirely in the designer’s hands as he can best determine which peak volt-
age, switching surges, transients, etc. can be expected in a particular circuit.
†
The 12S, 14S and 16S connectors require short contacts.
TABLE II
ALTITUDE VOLTAGE DERATING** CHART
Nominal
Distance
Standard Sea
Level Conditions
Pressure Altitude†
50,000 Feet
Pressure Altitude†
70,000 Feet
Minimum
Flashover
Voltage
Minimum
Flashover
Voltage
Minimum
Flashover
Voltage
Test
Voltage
AC (RMS)
MS
Service
Rating
Test
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Airspace
Creepage
AC (RMS)
AC (RMS)
AC (RMS)
Inst.
A
1/32
1/16
1/8
1/16
1/8
1400
2800
3600
4500
5700
8500
1000
2000
2800
3500
4500
7000
500
800
400
600
675
750
825
975
325
450
500
550
600
700
260
360
400
440
480
560
D
3/16
1/4
900
E
3/16
1/4
1000
1100
1300
B
5/16
1
C
5/16
† Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer must determine his own
operating voltage by the application of a safety factor to the above derating chart to compensate for cir-
cuit transients, surges, etc.
61
QWL
application tools (crimp type)
Complete installation instructions (L-516) for Amphenol®
QWL Series Connectors are available on request.
The following data includes information pertaining to the
application tools which have been established for crimping,
inserting and removing crimp contacts used in QWL
Series Connectors.
Contact Crimping, Insertion & Removal Tools
Crimping
Tool
Positioner/
Turret
Contact
Size
Contact
Style
Insertion
Tool
Removal
Tool
M22520/1-01
*
*
*
*
16
12
8
Pin & Socket
Pin & Socket
Pin & Socket
Pin & Socket
11-7345
11-7082
11-8250 Kit
11-8250 Kit
11-8250 Kit
M22520/1-01
*
*
11-8220
4
11-7365-4†
Pin11-7370-4†
Socket 11-7674-2†
*
*
0
Pin & Socket
11-7365-5†
Pin 11-7370-5†
Socket 11-7674-3†
*Refer to tool manufacturers for appropriate crimp tools or positioner/turret.
†Tools used with Arbor press 11-7364.
62
QWL
thermocouple contacts
Available from Amphenol is a complete line of cylindrical con-
nectors featuring thermocouple contact insert arrangements.
The design of these contacts is such that standard shell com-
ponents and resilient inserts are used in the assemblies. Ther-
mocouple contacts are available in all arrangements which
contain size 12 and 16 pins and sockets, and feature probe-
proof, closed entry design for the socket contacts. MS-
approved and other commercial arrangements may be ordered
with thermocouple contacts substituted for the standard con-
tacts. All thermocouple contact layouts may contain either iron,
alumel, chromel, constantan, standard (copper) or brass
(dummy) contacts. The resulting assembly will be identified
with an Amphenol® part number.
IDENTIFICATION
For the purpose of wiring identification, thermocouple contacts are
marked in accordance with the following color code which agrees with
the wire code.
Chromel.
Alumel .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. White
. Green
. Black
. Yellow
Iron
.
.
Constantan
This identification is made by means of small dots of stain on solder
well end of the contact and is in accordance with the listing shown
above.
WIRE WELL DATA
Contact Size
12
16
Well Inside
Diameter
Well
+.004
–.002
.125
.094
+.031
–.000
.250
.188
Depth
Solder Well
Barrel
+.002
–.004
.166 .003
.125
Outside Diameter
RECOMMENDED WIRE:
Chromel – Alumel: Use wire in accordance with AN-W-29
II Iron – Constantan: Use wire in accordance with AN-W-8b
I
63
QWL
thermocouple arrangements
Military connector specifications do not provide for thermo-
couple contact usage in established MS inserts. Amphe-
nol® has established a series of insert arrangements
containing thermocouple contacts. Some inserts have
been rotated into positions outside those covered by MS
drawings to prevent cross plugging. Available thermocou-
ple arrangements are tabulated on the following pages.
Please contact your local sales office or Sidney, NY for
additional information regarding thermocouple arrange-
ments particular to your application.
The following abbreviations are used in the contact material column:
Abbreviation
Material
Ir.
Con.
Cu.
Ch.
Al.
Dummy
Brass
Iron
Constantan
Copper
Chromel
Alumel
Contact
Size
Shell
Size
and Arrg.†
Similar
To
MS Arrg.
Total
Con-
Pin Insert
Rotation
C/W
Contact Material
tacts
2
2
2
2
2
2
2
2
2
2
2
2
2
4
2
6
4
4
4
3
2
2
6
6
4
6
6
4
3
4
4
2
4
12
16
2
2
2
2
2
2
2
2
2
2
2
2
2
4
2
6
4
4
4
3
2
2
6
6
4
6
6
4
3
4
4
2
4
12S-51
12S-54
12S-55
12S-56
12S-57
12S-58
12S-59
12S-60
12S-61
12S-62
12S-64
12S-65
14S-51
14S-52
14S-53
14S-54
14S-55
14S-56
14S-57
14S-58
14S-59
14S-60
14S-61
14S-63
14S-64
14S-65
14S-67
14S-68
14S-69
14S-70
14S-71
14S-72
14S-73
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
14S-9
14S-2
14S-9
14S-6
14S-2
14S-2
14S-2
14S-7
14S-9
14S-9
14S-6
14S-6
14S-2
14S-6
14S-6
14S-2
14S-7
14S-2
14S-2
14S-9
14S-2
315°
315°
45°
None
60°
120°
None
None
None
None
315°
None
90°
45°
90°
45°
45°
45°
45°
45°
90°
*
A = Ch.; B = Al.
A = Ir.; B = Con.
A = Cu.; B = Con.
A = Al.; B = Ch.
A = Ch.; B = Al.
A = Ir.; B = Con.
A = Ir.; B = Con.
A = Cu.; B = Con.
A = Ch.; B = Con.
A = Ch.; B = Al.
A = Cu.; B = Con.
A = Con.; B = Ir.
A = Al.; B = Ch.
A, B = Cu.; C = Al.; D = Ch.
A = Ir.; B = Con.
A, C, E = Ir.; B, D, F = Con.
A, C = Ir.; B, D = Con.
A = Ir.; B = Con.; C, D = Cu.
A, C = Al.; B, D = Ch.
A = Al.;B = Ch.;C = Cu.
A = Cu.; B = Con.
A = Al.; B = Ch.
45°
*
A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu.
A, C = Al.; B, D = Ch.; E = Ir.; F = Con.
A, C = Con.; B, D = Cu.
*
*
A, C, E = Cu.; B, D, F = Con.
A = Al.; B = Ch.; Bal = Cu.
A = Ch.; B = Con.; C, D = Cu.
A = Con.; B = Ch.; C = Cu.
A, D = Ch.; B, C = Al.
*
45°
*
*
*
A, B, D = Cu.; C = Con.
*
A = Con.; B = Cu.
*
A, B = Cu.; C = Al.; D = Ch.
†Insert arrangements including the letter “S” are available in QWL Series Connectors only.*No rotation required.
64
QWL
thermocouple arrangements (Cont’d.)
Contact
Size
Shell
Size
and Arrg.†
Similar
To
MS Arrg.
Total
Con-
tacts
Pin Insert
Rotation
C/W
Contact Material
12
16
4
4
4
4
2
5
2
2
4
6
6
3
6
6
2
3
6
4
6
6
2
7
7
7
7
7
7
7
7
14S-74
14S-75
14S-76
14S-77
14S-78
14S-79
14S-80
14S-81
14S-82
14S-83
14S-84
14S-85
14S-86
14S-87
14S-88
14S-89
14S-90
14S-91
14S-93
14-59
14S-2
14S-2
14S-2
14S-2
14S-9
14S-5
14S-9
14S-9
14S-2
14S-6
14S-6
14S-7
14S-6
14S-6
14S-9
14S-7
14S-6
14S-2
14S-6
14-53
16S-4
16S-1
16S-1
16S-1
16S-1
16S-1
16S-1
16S-1
16S-1
16-11
16-9
4
4
4
4
2
5
2
2
4
6
6
3
6
6
2
3
6
4
6
6
2
7
7
7
7
7
7
7
7
2
4
3
2
3
3
2
2
2
4
6
5
6
4
10
6
6
*
A, B = Ch.; C, D = Al.
*
A, B = Cu.; C, D = Con.
A, C = Al.; B, D = Ch.
*
*
A, D = Al.; B, C = Ch.
*
A = Ch.; B = Al.
*
A, B, E = Cu.; C = Al.; D = Ch.
A = Cu.; B = Con.
*
*
A = Al.; B = Cu.
*
A = Ir.; B = Con.; C = Ch.; D = Al.
A, C = Ir.; B, D = Con.; E, F = Cu.
A, B = Al.; Bal = Cu.
*
*
*
A = Ch.; B = Al.; C = Cu.
A, F = Ir.; B, E = Con.; C, D = Cu.
A, B, C, D = Ir.; E, F = Con.
A = Ch.; B = Con.
*
*
90°
*
A = Ir.; B = Cu., C = Con.
A = Al.; C = Ch.; Bal. = Cu.
A = Al.; B = Ch.; Bal. = Cu.
A, B, F = Al.; D, C, E = Ch.
*
*
*
*
A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu.
A = Ch.; B = Al.
16S-52
16S-54
16S-55
16S-56
16S-57
16S-58
16S-59
16S-60
16S-61
16-52
*
*
A = Al.; B = Ch.; Bal. = Cu.
A = Con.; Bal. = Cu.
*
*
A = Al.; D = Ch.; Bal. = Cu.
A, B = Al.; C, D = Ch.; Bal. = Cu.
A, G = Al.; Bal. = Ch.
*
*
*
A, C = Ir.; B, D = Con.; Bal. = Cu.
A = Ir.; B = Con.; Bal. = Cu.
G = Al.; Bal. = Ch.
*
*
2
2
3
2
3
3
2
2
2
2
90°
70°
45°
90°
*
A = Al.; B = Ch.
16-53
2
A = Al.; C = Ch.; B, D = Cu.
A = Al.; B = Ch.; C = Cu.
A = Con.; B = Cu.
16-55
16-10
16-13
16-10
16-10
16-13
16-11
16-11
16-9
16-56
16-57
A = Al.; B = Cu.; C = Ch.
A = Con.; B, C = Cu.
16-58
*
16-60
*
A = Al.; B = Ch.
16-62
*
A = Con.; B = Cu.
16-67
*
A = Al.; B = Ch.;
16-68
2
6
*
A, B, C = Ch.; D = Al.
18-51
18-12
18-11
18-12
18-15
18-1
*
A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy
A = Ir.; B = Con.; C = Ch.; D = Al.; E = Dummy
A, D = Ir.; B, E = Con.; C, F = Dummy
A, C = Al.; B, D = Ch.
18-52
5
4
*
18-53
6
*
18-54
*
18-56
10
6
45°
45°
45°
A, C, E, G, I = Ir.; B, D, F, H, J = Con.
A, C, E = Al.; B, D, F = Ch.
A, C = Ir.; B, E, F = Con.; D = Cu.
18-57
18-12
18-12
18-59
6
†Insert arrangements including the letter “S” are available in QWL Series Connectors only.
*No rotation required.
65
QWL
thermocouple arrangements (Cont’d.)
Contact
Size
Shell
Size
and Arrg.†
Similar
To
MS Arrg.
Total
Con-
tacts
Pin Insert
Rotation
C/W
Contact Material
12
5
16
18-60
18-61
18-62
18-63
18-65
18-66
18-67
18-68
18-69
18-70
18-71
18-72
18-73
18-74
18-76
18-77
18-78
18-79
18-80
18-81
18-82
20-52
20-56
20-60
20-61
20-62
20-64
20-65
20-67
20-68
20-69
20-70
20-71
20-74
20-75
20-77
20-80
20-81
20-82
20-85
20-87
20-88
20-89
20-90
20-91
18-11
18-12
18-12
18-15
18-12
18-1
5
6
45°
A, D = Al.; B, C = Ch.; E = Al.
6
6
*
A, C = Ir.; B, D = Con.; E = Ch.; F = Al.
A, B, C = Ir.; D, E, F = Con.
6
*
4
4
*
A, C = Con.; B, D = Cu.
6
6
10
6
*
A = Ir.; B = Con.; Bal. = Cu.
10
6
*
A, C, E, G, I = Cu.; B, D, F, H, J = Con.
A, C, E = Cu.; B, D, F = Con.
18-12
18-11
18-1
*
5
5
*
A, D = Al.; B, C = Ch.; E = Cu.
10
5
10
*
A = Al.; B = Ch.; Bal. = Cu.
18-11
18-15
18-15
18-9
5
4
4
2
*
A = Ir.; B = Con.; C = Ch.; D = Al.; E = Cu.
A = Con.; Bal. = Cu.
4
*
4
*
D = Con.; Bal. = Cu.
7
5
6
*
A = Al.; D = Ch.; Bal. = Cu.
18-12
18-1
6
*
A = Ch.; B = Al., D = Ir.; E = Cu.; C, F = Con.
A, C, E, G, I = Al.; B, D, F, H, J = Ch.
A, C, E, G = Al.; B, D, F, H = Ch.; Bal. = Cu.
A = Al.; B = Ch.; D, F, H, J = Con.; Bal. = Cu.
A, F = Ir.; B, E = Con.; C, D = Cu.
A, C = Cu.; B, D = Con.
10
10
10
6
10
10
10
6
*
18-1
*
18-1
*
18-12
18-15
18-1
*
4
4
4
*
10
10
4
10
10
*
E, G = Con.; Bal. = Cu.
18-1
*
E, G = Con.; F, H = Ir.; Bal. = Cu.
A = Ir.; B = Con.; C = Ch.; D = Al.
A, B, G, H = Ir.; C, D, E, F = Con.
D = Ch.; E = Al.; Bal. = Cu.
20-4
315°
20-7
8
8
8
45°
20-7
8
45°
20-29
20-15
20-27
20-27
20-16
20-7
17
7
17
45°
A, B, M = Cu.; Bal. = Con.
7
2
80°
*
A, C, E = Al.; B, D, F = Ch.; G = Cu.
A = Al.; C = Ch.; Bal. = Cu.
14
14
9
14
14
7
*
A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con.
H = Al.; I = Ch.; Bal. = Cu.
*
8
8
*
A, B, G, H = Con.; C, D, E, F = Cu.
A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con.
A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con.
S = Al.; R = Ch.; Bal. = Cu.
20-27
20-29
20-29
20-29
20-15
20-16
20-27
20-27
20-29
20-33
20-29
20-27
20-27
20-27
20-27
14
17
17
17
7
14
17
17
17
*
*
*
*
A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu.
G = Al.; Bal = Ch.
7
2
*
9
7
*
A = Con.; Bal. = Std.
14
14
17
11
17
14
14
14
14
14
14
17
11
17
14
14
14
14
*
A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con.
A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = Al.
A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; T = Cu.
K, L = Al.; Bal. = Ch.
*
*
*
*
A, C, E, G, J, L, N, R = Con.; Bal. = Cu.
A, C, E = Al.; B, D, F = Ch.; G, H, K, N = Con.; Bal. = Cu.
B, D, F, H, J, L = Al.; A, C, E, G, I, K = Ch.; M, N = Cu.
C, G, I = Ch.; K, L, M = Al.; Bal. = Cu.
I = Ch.; K = Al.; Bal. = Cu.
*
*
*
*
*No rotation required.
66
QWL
thermocouple arrangements (Cont’d.)
Contact
Size
Shell
Size
and Arrg.
Similar
To
MS Arrg.
Total
Con-
tacts
Pin Insert
Rotation
C/W
Contact Material
12
16
8
20-92
20-93
20-94
20-99
22-57
22-60
22-62
22-68
22-69
22-71
22-72
22-73
22-74
22-75
22-76
22-77
22-78
22-79
22-82
22-83
22-84
22-85
22-89
24-56
24-57
24-62
24-63
24-64
24-68
24-81
24-88
24-91
28-53
28-58
28-61
28-63
20-7
8
*
A = Al.; H = Cu.; Bal. = Ch.
A = Ch.; B = Al.; Bal. = Cu.
A, C, E = Al.; B, D, F = Ch.; G = Cu.
A = Al.; Bal. = Ch.
20-27
20-15
20-33
22-14
22-14
22-23
22-19
22-19
22-14
22-5
14
7
14
*
7
*
11
19
19
8
11
19
19
*
45°
A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T, U, V = Cu.
U = Al.; N = Ch.; Bal. = Cu.
45°
8
60°
A, B, F, G = Al.; C, D, E, H = Ch.
14
14
19
6
14
14
19
4
45°
A, C, E, G, J, L, M = Ir.; B, D, F, H, K, P, N = Con.
A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con.
V = Al., U = Ch.; Bal. = Cu.
45°
*
2
2
8
8
*
B = Al.; E = Ch.; Bal. = Cu.
22-5
6
4
*
E = Al.; B = Ch.; Bal. = Cu.
22-23
22-23
8
*
A, C, E, G = Ir.; B, D, F, H = Con.
8
*
A = Al.; B, D, G, H = Cu.; C = Ch.; E = Ir.; F = Con.
W = Con.; Bal. = Cu.
21
14
19
4
21
14
19
4
*
22-19
22-14
22-10
22-14
22-18
22-14
22-19
22-28
24-20
24-28
24-28
24-28
24-5
*
B, D, F, H, J, K, M, P = Cu.; A, E, L = Ir.; C, G, N = Con.
A, C, E, G, H, K, M, P, R, T = Con.; Bal. = Cu.
A, C = Con.; B, D = Cu.
*
*
19
8
19
8
*
A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S, U = Con.; V = Cu.
A, C, E, G = Al.; B, D, F, H = Ch.
*
*
19
14
7
19
14
A, C, S = Ch.; B, D, T = Al.; Bal. = Cu.
*
A, C, E, G, J, L, N = Al.; B, D, F, H, K, M, P = Ch.
A, C, E = Ir.; B, D, F = Con.; G = Cu.
7
2
*
11
24
24
24
16
24
16
24
16
22
14
37
14
9
45°
45°
*
E = Al.; F = Ch.; Bal. = Cu.
24
24
24
16
24
14
24
16
18
4
A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Bal. = Al.
A, C, E, G = Ir.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Bal. = Cu.
A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z = Con.
A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con.
D = Con.; Bal. = Cu.
*
*
24-28
24-7
*
2
*
A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con.
A, B, C, D, E, F, G, H, J, K, L, M = Con.; Bal. = Ir.
A, B, C, D, E, F, G, H = Al.; J, K, L, M, N, P, R, S = Ch.
J, L = Al.; K, M = Ch.; Bal. = Cu.
24-28
24-5
*
*
28-11
28-20
28-21
28-20
4
45°
45°
45°
45°
10
A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu.
A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Bal. = Con.
A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Bal. = Cu.
37
4
10
A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.;
Bal. = Cu.
28-64
28-65
28-15
28-12
35
26
35
26
*
*
A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M,
P, S, U, W, = Con.; Y, a = Ch.; b, d = Cu.
28-67
28-68
28-69
28-70
28-77
28-16
28-15
28-11
28-11
28-11
20
35
22
22
22
20
35
18
18
18
*
45°
*
U = Con.; Bal. = Cu.
T = Al.; U = Ch.; Bal. = Cu.
G = Al.; R = Ch.; Bal. = Cu.
A = Al.; B = Ch.; Bal. = Cu.
J = Con.; Bal. = Cu.
4
4
4
*
*
67
QWL
thermocouple arrangements (Cont’d.)
Contact
Size
Shell
Size
and Arrg.
Similar
To
MS Arrg.
Total
Con-
tacts
Pin Insert
Rotation
C/W
Contact Material
12
16
37
A, D, S, Z, n, s = Ir.; B, J, K, f, g, r, = Con.; G, L, P, b, e, j = Al.;
F, H, T, X, h, k = Ch.; Bal. = Cu.
28-81
28-21
37
*
28-85
28-91
28-94
28-98
28-99
28-AC
28-AD
28-AE
28-AF
28-AG
28-AK
32-51
32-55
28-11
28-9
22
12
26
37
26
20
37
37
12
26
37
30
30
4
6
18
6
45°
K, M = Al.; J, L = Ch.; Bal. = Cu.
*
M = Ir.; L = Con.; Bal. = Cu.
28-12
28-21
28-12
28-16
28-21
28-21
28-18
28-12
28-21
32-8
26
37
26
20
37
37
12
26
37
24
24
*
B, D, F, H, K, M, P, S, U, W, Y, a, d = Al.; Bal. = Ch.
M = Al.; F = Ch.; Bal. = Cu.
*
*
B, D, F, H, K, M, P, S, U, W, Y, a = Con.; Bal. = Cu.
A, C, E, G, J, L = Ir.; B, D, F, N, K, M = Con.; Bal. = Cu.
A, C, F, H, J, K, M, N, T, X, Z, a, d, h, k, m, n, r = Cu.; Bal. = Con.
A, C, E, G, J, L, N, R, T, V, X, a, c, e, g, j, m, p, s = Cu.; Bal. = Con.
A, C, E, G, J, L = Ch.; Bal. = Al.
*
45°
*
*
*
A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; Bal. = Cu.
A, B, C, D, J, K, L, M, N, P, X, a, b, c, d, e, m, p = Ch.; n = Cu.; Bal. = Al.
M = Ch.; N = Al.; Bal. = Cu.
*
6
6
90°
125°
32-8
M, N, = Ch.; O, P = Al.; Bal. = Cu.
A, C, E, G, J, L, N, P, S, U, W, Y, a, c, e, g, j, m = Ir.; B, D, F, H, K, M, O,
R, T, V, X, Z, b, d, f, h, k, n = Con.; Bal. = Cu.
32-91
32-64
54
54
*
36-53
36-56
36-57
36-58
36-61
36-62
36-82
36-7
47
48
47
35
35
48
52
7
1
40
48
46
35
35
48
52
45°
u, v, w = Al.; x, y, z = Ch.; Bal. = Cu.
36-10
36-8
*
*
*
*
*
*
A, C, E, G, L, J, H, P, R, T, V, X, Z, b, d, f, h, k, q, n, m, u, w, y = Con.; Bal. = Cu.
W = Al.; f = Ch.; Bal. = Cu.
36-15
36-15
36-10
36-52††
H = Al.; G = Ch.; Bal. = Cu.
A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Bal. = Cu.
A, C, E = Al.; B, D, F = Ch.; Bal. = Cu.
v, g = Ir.; p, y, c = Con.; x = Ch.; Bal. = Cu.
A, C, E, G, J, L, N, P, R, T, V, X = Al.; B, D, F, H, K, M, O, Q,
S, U, W, Y = Ch.; z, b, d, f, h, k, n, q, s, u, w, y = Con.;
a, c, e, g, j, m, p, r, t, v, x, z = Cu.
36-86
36-88
40-58
36-10
48
52
85
48
52
85
*
*
*
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z,
AB, AD, AF = Cu.; Bal. = Con.
36-52
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z,
AB, AD, AF, AJ, AL, AN, AP, AS, AU, AW, AY, BA, BC,
BE, BH, BK, BM, BP, BS, BU = Ir.; Bal. = Con.
40-56††
40-59
40-77
40-56††
40-53††
85
60
85
60
*
*
B = Ch.; C = Con.; Bal. = Cu.
55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Bal. = Cu.
50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37, = Con.; 25, 39, 40, 41 = Al.;
43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Bal. = Cu.
40-78
40-88
40-53††
40-53
60
60
60
60
*
*
1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39,
41, 43, 45, 47, 49, 51, 53, 55, 57, 59 = Con.; Bal. = Cu.
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF,
AJ, AL, AN, AR, AT = Cu.; B, D, F, J, L, N, R, T, V, X, Z, b, d, g, i, k, n,
q, s, u, w, y, AA, AC, AE, AH, AK, AM, AP, AS = Con.; AU, AW, AY, BA,
BC, BE, BH, BK, BM, BP, BS, BU = Ch.; AV, AX, AZ, BB, BD, BF, BJ, BL,
BN, BR, BT, BV = Al.
40-AA
40-56
85
85
*
44-57
44-59
44-60
44-52
44-52
44-52
104
104
104
104
104
104
*
*
*
A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con.
34 = Con.; 70 = Cu.
A, C, E, etc. = Ch., (52); B, D, F, etc. = Al. (52)
BY, BZ, CA, CB, CC, CD, CE, CR = Al.; CH, CJ, CK, CL, CM, CN, CP
CS = Ch.; Bal. = Cu.
44-62
44-52
104
104
*
††Amphenol® arrangement*No rotation required.
68
Other Heavy Duty Cylindrical Connectors
Offered by Amphenol
Class “L” MIL-C-22992, QWLD and Star-Line
Amphenol meets the demands for heavy duty connectors by
providing three additional cylindrical connector series, each
with unique design characteristics for reliable operation in spe-
cific industrial environments.
Class “L”, MIL-C-22992 – for the heaviest electrical loads; for
military and industrial applications.
•
•
•
MIL-C-22992 qualification.
Current range from 40 to 200 amperes.
Direct current or single/three phase, 60/400 Hertz alternat-
ing current.
•
•
•
Rugged shells are resistant to vibration, high impact, shock
and corrosion
Double stub threads per MIL-STD-1373 for fast coupling
and easy cleaning.
Five key polarization system assures that circuits with
incompatible power characteristics (voltage, phase and frequency) are not mated.
Crimp termination. Contacts can be soldered.
Automatic grounding for safety.
Unique arc quenching capability provides a positive safety feature if connectors are
inadvertently disconnected under load.
Heavy Duty Class “L”
Connectors
•
•
•
•
•
4 shell styles with 7 insert patterns that facilitate large conductors.
Grommets and seals provide waterproofing.
QWLD – for most power and control circuits
•
Military (MIL-C-22992) qualified connectors and industrial
equivalents available.
•
Increased shell size for greater durability than similar
standard connectors.
•
•
•
Crimp or solder termination.
Double stub threaded per MIL-STD-1373.
7 shell styles with over 300 insert patterns (MIL-C-5015 inserts
plus specials)
QWLD Series
•
Class C is pressurized; Class R is environmental.
Star-line® Series – heavy duty environmentally sealed plugs and receptacles
that are used in all types of industrial and aerospace applications.
•
•
•
•
Equals or exceeds MIL-C-5015 E and R specifications.
UL listed and CSA listed circuit breaking capability.
Up to high amperage of 1135 amps at 1000VAC or DC rating available.
Solder, crimp and pressure terminals. Circuit breaking power and control
types.
•
Double lead Acme threads provide complete coupling in one turn of the
coupling nut, and do not clog under adverse weather conditions.
IP67 rating for environmental sealing.
Hard anodic coating provides dielectric strength with heat and corrosion
resistance.
•
•
Star-Line Series
Star-line EX® Series – Hybrid form of the Star-Line series with higher temperature
ranges. Cenelec Certified for use in Zone 1-IIc
hazardous environments. EX Certificate #03ATEX 1101X.
For further information on these additional heavy duty cylindri-
cal connectors, refer to the following:
Catalog 12-052 for Class “L”, MIL-C-22992 Connectors
Catalog 12-052 for QWLD Connectors
69
Catalog 12-054 for Star-Line and Star-Line EX Connectors.
相关型号：
©2020 ICPDF网 联系我们和版权申明