5AGTFD3D627C4N [ALTERA]
Arria V Device Handbook; 阿里亚V器件手册型号: | 5AGTFD3D627C4N |
厂家: | ALTERA CORPORATION |
描述: | Arria V Device Handbook |
文件: | 总82页 (文件大小:1787K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Arria V Device Handbook Volume 1: Device Overview and
Datasheet
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
101 Innovation Drive
San Jose, CA 95134
www.altera.com
Document last updated for Altera Complete Design Suite version:
Document publication date:
11.1
February 2012
AV-5V1-1.3
© 2012 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos
are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance of its
ISO
semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any products and 9001:2008
services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service Registered
described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying
on any published information and before placing orders for products or services.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
Contents
Chapter Revision Dates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Chapter 1. Overview for the Arria V Device Family
Arria V Feature Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Arria V Family Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4
Low-Power Serial Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–7
PMA Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–8
PCS Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–8
PCIe Gen1 and Gen2 Hard IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–10
FPGA GPIOs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–10
External Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–11
ALM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–12
Variable-Precision DSP Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–12
Embedded Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–14
Dynamic and Partial Reconfiguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–14
Clock Networks and PLL Clock Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–15
Enhanced Configuration and Configuration via Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–16
Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–16
SoC FPGA with HPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–17
Features of the HPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–17
System Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–18
HPS-FPGA AXI Bridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–18
HPS SDRAM Controller Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–18
FPGA Configuration and Processor Booting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–18
Hardware and Software Development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–19
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–20
Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–21
Chapter 2. Device Datasheet for Arria V Devices
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4
DC Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6
Internal Weak Pull-Up Resistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10
I/O Standard Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–14
Switching Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–14
Transceiver Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–15
Core Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–27
Clock Tree Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–27
PLL Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–27
DSP Block Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–29
Memory Block Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–30
Temperature Sensing Diode Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–30
Periphery Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–31
High-Speed I/O Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–31
DQS Logic Block and Memory Output Clock Jitter Specifications . . . . . . . . . . . . . . . . . . . . . . . . 2–35
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
iv
Contents
OCT Calibration Block Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–36
Duty Cycle Distortion (DCD) Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–36
Configuration Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–37
POR Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–37
JTAG Configuration Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–37
FPP Configuration Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–38
DCLK-to-DATA[] Ratio (r) for FPP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–38
FPP Configuration Timing when DCLK to DATA[] = 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–38
FPP Configuration Timing when DCLK to DATA[] > 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–41
AS Configuration Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–43
PS Configuration Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–44
Remote System Upgrades Circuitry Timing Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–46
User Watchdog Internal Oscillator Frequency Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–46
I/O Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–47
Programmable IOE Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–47
Programmable Output Buffer Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–47
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–48
Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–51
Additional Information
How to Contact Altera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Info–1
Typographic Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Info–1
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter Revision Dates
The chapters in this document, Volume 1: Device Overview and Datasheet, were
revised on the following dates. Where chapters or groups of chapters are available
separately, part numbers are listed.
Chapter 1. Overview for the Arria V Device Family
Revised: February 2012
Part Number: AV51001-1.3
Chapter 2. Device Datasheet for Arria V Devices
Revised:
February 2012
Part Number: AV-51002-1.3
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
vi
Chapter Revision Dates
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
1. Overview for the Arria V Device Family
February 2012
AV51001-1.3
AV51001-1.3
Built on the 28-nm low-power process technology, Arria® V devices offer the lowest
power and lowest system cost for mainstream applications. Arria V devices include
unique innovations such as the lowest static power in its class, the lowest power
transceivers of any midrange family, support for serial data rates up to
10.3125 gigabits per second (Gbps), a powerful collection of integrated hard
intellectual property (IP), and a power-optimized core architecture, making Arria V
devices ideal for the following applications:
■
■
■
■
Power sensitive wireless infrastructure equipment
20G/40G bridging, switching, and packet processing applications
High-definition video processing and image manipulation
Intensive digital signal processing (DSP) applications
Arria V devices are available in the following variants:
■
Arria V GX—FPGA with integrated 6-Gbps transceivers, this variant provides
bandwidth, cost, and power levels that are optimized for high-volume data and
signal-processing applications.
■
Arria V GT—FPGA with integrated 10-Gbps transceivers, this variant provides
enhanced high-speed serial I/O bandwidth for cost-sensitive data and signal
processing applications.
■
■
Arria V SX—system-on-a-chip (SoC) FPGA with integrated Arria V FPGA and
ARM®-based hard processor system (HPS).
Arria V ST—SoC FPGA with integrated Arria V FPGA, ARM-based HPS, and
10-Gbps transceivers.
The Arria V SoC FPGA variants feature an FPGA integrated with an HPS that consists
of a dual-core ARM Cortex™-A9 MPCore™ processor, a rich set of peripherals, and a
shared multiport SDRAM memory controller.
The unique feature set in Arria V devices was chosen to optimize power, cost, and
performance. These features include a redesigned adaptive logic module (ALM),
distributed memory, new 10-Kbit (M10K) internal memory blocks, variable-precision
DSP blocks, and fractional clock synthesis phase-locked loops (PLLs) with a highly
flexible clocking network, all interconnected by a power-optimized MultiTrack
routing architecture.
© 2012 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos
are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance of its
semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any products and
services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service
described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying
on any published information and before placing orders for products or services.
ISO
9001:2008
Registered
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012
Subscribe
1–2
Chapter 1: Overview for the Arria V Device Family
Arria V Feature Summary
Arria V devices provide interface support flexibility with up to 10-Gbps transceivers,
1.25-Gbps LVDS, 1.333-Gbps memory interfaces with low latency, and support for all
mainstream single-ended and differential I/O standards, including 3.3 V. Arria V
devices also offer the lowest system cost by requiring only three power supplies to
operate the devices and a thermal composite flip chip ball-grid array (BGA)
packaging option. Arria V devices also support innovative features, such as
configuration via protocol (CvP), partial reconfiguration, and design security.
Arria V devices provide the power, features, and cost you require to succeed with
your designs. With these innovations, Arria V devices deliver ideal performance and
capability for a wide range of applications.
Arria V Feature Summary
Table 1–1 lists the Arria V device features.
Table 1–1. Feature Summary for Arria V Devices (Part 1 of 3)
Feature
Details
■ 28-nm TSMC low-power process technology
■ Lowest static power in its class (less than 800 mW for 500 K logic elements (LEs) at 85°C
Technology
junction under typical conditions)
■ 1.1-V core nominal voltage
■ 611-Mbps to 10.3125-Gbps integrated transceivers
■ Transmit pre-emphasis and receiver equalization
■ Dynamic reconfiguration of individual channels
■ 1.25-Gbps LVDS
Lowest-power serial
transceivers of any
midrange FPGA
■ 667-MHz/1.333-Gbps external memory interface
■ On-chip termination (OCT)
FPGA General-purpose
I/Os (GPIOs)
■ 3.3-V support
■ Custom implementation up to 10.3125 Gbps
■ PCI Express® (PCIe®) Gen1 and Gen2
■ Gbps Ethernet (GbE) and XAUI physical coding sublayer (PCS)
■ Common Public Radio Interface (CPRI) PCS
■ Gigabit-capable passive optical network (GPON) PCS
Embedded transceiver
hard IP
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 1: Overview for the Arria V Device Family
1–3
Arria V Feature Summary
Table 1–1. Feature Summary for Arria V Devices (Part 2 of 3)
Feature
Details
■ Dual-core ARM Cortex-A9 MPCore processor. Up to 800 MHz maximum frequency that
supports symmetric and asymmetric multiprocessing
■ Interface peripherals—10/100/1000 Ethernet media access control (MAC), USB 2.0 On-
The-Go (OTG) controller, Quad SPI flash controller, NAND flash controller, and
SD/MMC/SDIO controller, UART, serial peripheral interface (SPI), I2C interfaces, and up to
86 GPIO interfaces
■ System peripherals—general-purpose and watchdog timers, direct memory access (DMA)
controller, FPGA configuration manager, and clock and reset managers
HPS (Arria V SX and ST
devices only)
■ On-chip RAM and boot ROM
■ HPS–FPGA bridges—include the FPGA-to-HPS, HPS-to-FPGA, and lightweight HPS-to-
FPGA bridges that allow the FPGA fabric to master transactions to slaves in the HPS, and
vice versa
■ FPGA-to-HPS SDRAM controller subsystem—provides a configurable interface to the
multiport front end of the HPS SDRAM controller
■ ARM CoreSight™ JTAG debug, trace port, and on-chip trace storage
■ Three fractional PLLs
Physical medium
attachment (PMA) with
soft PCS
■ 10GBASE-R
■ 9.8304-Gbps CPRI
■ Enhanced ALM with four registers
High-performance core
fabric
■ Improved routing architecture to reduce congestion and improve compilation time
■ Natively supports three-signal processing precision ranging from 9 x 9, 18 x 19, or 27 x 27
in the same DSP block
Variable-precision DSP
blocks
■ 64-bit accumulator and cascade for systolic finite impulse responses (FIRs)
■ Embedded internal coefficient memory
■ Pre-adder/subtractor improves efficiency
■ M10K, 10 Kbit with soft error correction code (ECC)
■ Memory logic array block (MLAB), 640-bit distributed LUTRAM—you can use up to 25% of
Internal memory blocks
the LEs as MLAB memory
■ Hardened double data rate3 (DDR3) and DDR2 memory controllers
■ Integer mode and fractional mode
High-resolution Fractional
PLLs
■ Precision clock synthesis, clock delay compensation, and zero delay buffering (ZDB)
■ 625-MHz global clock network
Clock networks
■ Global, quadrant, and peripheral clock networks
■ Unused clock networks can be powered down to reduce dynamic power
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–4
Chapter 1: Overview for the Arria V Device Family
Arria V Family Plan
Table 1–1. Feature Summary for Arria V Devices (Part 3 of 3)
Feature
Details
■ Partial and dynamic reconfigurations
■ CvP
■ Configuration via HPS
Configuration
■ Serial and parallel flash interface
■ Enhanced advanced encryption standard (AES) design security features
■ Tamper protection
■ Remote system upgrade
■ Thermal composite flip chip BGA packaging
■ Multiple device densities with identical package footprints for seamless migration between
Packaging
different device densities
■ Lead, lead-free (Pb-free), and RoHS-compliant options
Arria V Family Plan
Arria V devices offer various thermal composite flip chip BGA packaging options
with differing price and performance points. Table 1–2 and Table 1–3 list the Arria V
devices features.
Table 1–2. Maximum Resource Counts for Arria V GX Devices —Preliminary
Arria V GX Device
Feature
5AGXA1 5AGXA3 5AGXA5 5AGXA7 5AGXB1 5AGXB3 5AGXB5 5AGXB7
ALMs
LE (K)
28,302
75
56,100
148
1,051
873
10,510
396
792
10
71,698
190
91,680 113,208 136,880 158,491 190,240
242
1,366
1,448
13,660
800
1,600
12
300
1,510
1,852
15,100
920
1,840
12
362
1,726
2,098
17,260
1,045
2,090
12
420
2,054
2,532
20,540
1,092
2,184
16
504
2,414
2,906
24,140
1,139
2,278
16
M10K memory blocks
MLAB memory (Kbit)
Block memory (Kbit)
Variable-precision DSP blocks
18 x 19 multipliers
Fractional PLLs (1)
800
463
8,000
240
480
10
1,180
1,173
11,800
600
1,200
12
GPIO
480
68
480
68
544
544
120
136
2
704
160
176
2
704
704
704
LVDS transmitter (TX) (2)
LVDS receiver (RX) (2)
PCIe hard IP blocks
Hard memory controllers
Notes to Table 1–2:
120
160
156
160
80
80
136
176
172
176
1
1
2
2
2
2
2
2
4
4
4
4
4
4
(1) The total number of available fractional PLLs is a combination of general-purpose and transceiver PLLs. Transceiver fractional PLLs that are
not used by the transceiver I/O can be used as general-purpose fractional PLLs.
(2) For the LVDS channels count for each package, refer to the High-Speed Differential I/O Interfaces with DPA in Arria V Devices chapter.
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 1: Overview for the Arria V Device Family
1–5
Arria V Family Plan
Table 1–3. Maximum Resource Counts for Arria V GT, SX, and ST Devices—Preliminary
Arria V GT Device
Arria V SX Device
Arria V ST Device
Feature
5AGTD3
5AGTD7
190,240
504
5ASXB3
5ASXB5
174,340
462
5ASTD3
5ASTD5
174,340
462
ALMs
LE (K)
136,880
362
1,726
2,098
17,260
1,045
2,090
12
132,075
350
132,075
350
M10K memory blocks
MLAB memory (Kb)
Block memory (Kb)
Variable-precision DSP blocks
18 x 19 multipliers
FPGA Fractional PLLs (1)
HPS PLLs (1)
2,414
2,906
24,140
1,156
2,312
16
1,729
2,014
17,288
809
2,282
2,658
22,820
1,068
2,186
TBD
TBD
528
1,729
2,014
17,288
809
2,282
2,658
22,820
1,068
2,186
TBD
TBD
528
1,618
TBD
TBD
528
1,618
TBD
TBD
528
—
—
FPGA GPIO
704
—
704
HPS I/O
—
216
216
216
216
LVDS TX (2)
LVDS RX (2)
160
176
2
160
120
120
120
120
176
120
120
120
120
PCIe hard IP blocks
Hard memory controllers
HPS memory controllers
2
2
2
2
2
4
4
3
3
3
3
—
—
1
1
1
1
ARM Cortex–A9 MPCore
processor
—
—
Dual-core
Dual-core
Dual-core
Dual-core
Notes to Table 1–3:
(1) The total number of available fractional PLLs is a combination of general-purpose and transceiver PLLs. Transceiver fractional PLLs,
when not used by the transceiver I/O, can be used as a general-purpose fractional PLL.
(2) For the LVDS channels count for each package, refer to the High-Speed Differential I/O Interfaces with DPA in Arria V Devices chapter.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–6
Chapter 1: Overview for the Arria V Device Family
Arria V Family Plan
Table 1–4 lists the Arria V package plan. The package plan shows the GPIO counts,
the maximum number of 6-Gbps transceivers available, and the maximum number of
10-Gbps transceivers available per density and package. Various combinations of
6-Gbps and 10-Gbps transceiver counts are available.
Table 1–4. Package Plan for Arria V Devices —Preliminary (1)
F672 (27 mm)
Flip Chip
F896 (31 mm)
Flip Chip
F1152 (35 mm)
Flip Chip
F1517 (40 mm)
Flip Chip
Varients
Devices
GPIO
HPS
I/O
HPS
HPS
GPIO XCVR
XCVR
GPIO
XCVR
GPIO
XCVR
(2)
I/O
I/O
5AGXA1
5AGXA3
5AGXA5
5AGXA7
5AGXB1
5AGXB3
5AGXB5
5AGXB7
5AGTD3
5AGTD7
5ASXB3
5ASXB5
5ASTD3
5ASTD5
336
336
336
336
—
9
480
480
384
384
384
384
—
—
—
12
12
—
—
—
—
—
—
—
—
—
9
—
—
—
9
—
18
544
544
544
544
544
544
544
544
350
350
350
350
—
24
—
—
—
9
—
18
—
24
—
—
—
Arria V GX
(3)
—
—
—
—
—
—
—
—
—
—
—
18
—
24
704
704
704
704
704
704
528
528
528
528
—
24
—
—
18
—
24
—
24
—
—
—
—
24
—
36
—
—
—
—
—
24
—
36
—
384
—
—
12, 2
—
—
12, 4
12, 4
18
—
12, 4
12, 8
30
Arria V GT
(4) (5)
,
—
—
—
—
—
178
178
178
178
216
216
216
216
12
216
216
216
216
216
216
216
216
Arria V SX
(3)
—
12
18
30
—
6, 2
6, 2
12, 2
12, 2
12, 6
12, 6
Arria V ST
(4), (5)
—
Notes to Table 1–4:
(1) The arrows indicate the package vertical migration capability. Vertical migration allows you to migrate across device densities for devices having
the same dedicated pins, configuration pins, and power pins for a given package.
(2) In the F896 package, the PCIe hard IP block on the right side of the 5AGXA5, 5AGXA7, 5AGXB1, 5AGXB3, and 5AGTD3 devices supports x1 for
Gen1 and Gen2 data rates.
(3) The transceiver counts listed are for 6-Gbps transceivers.
(4) The transceiver counts listed are for 6-Gbps and 10-Gbps transceivers, respectively.
(5) You can alternatively configure any pair of 10-Gbps channels as six 6-Gbps channels. For instance, you can alternatively configure the 5AGTD7
device in the F1517 package as eighteen 6-Gbps and six 10-Gbps, twenty-four 6-Gbps and four 10-Gbps, or thirty 6-Gbps and two 10-Gbps
channels.
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 1: Overview for the Arria V Device Family
1–7
Low-Power Serial Transceivers
Low-Power Serial Transceivers
Arria V devices deliver the industry’s lowest power 10-Gbps transceivers at less than
140 mW and 6-Gbps transceivers at less than 100 mW power consumption per
channel. Arria V transceivers are designed to be standard compliant for a wide range
of protocols and data rates.
The transceivers are positioned on the left and right outer edges of the device, as
shown in Figure 1–1.
(1), (2)
Figure 1–1. Device Chip Overview for Arria V Devices
General Purpose I/Os (LVDS, Memory Interface)
Integrated Multiport Memory Controllers
ALM
M10K Internal Memory Blocks
Variable-Precision DSP Blocks
Integrated Multiport Memory Controllers
General Purpose I/Os (LVDS, Memory Interface)
Notes to Figure 1–1:
(1) This figure represents an Arria V device with transceivers. Other Arria V devices may have a different floor plan than the one shown here.
(2) This figure is a graphical representation of a top view of the silicon die, which corresponds to a reverse view for flip chip packages.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–8
Chapter 1: Overview for the Arria V Device Family
Low-Power Serial Transceivers
PMA Support
To prevent core and I/O noise from coupling into the transceivers, the PMA block is
isolated from the rest of the chip, ensuring optimal signal integrity. The transceiver
channels consist of the PMA, PCS, and clock networks. You can also use the unused
receiver PMA channels as additional transmit PLLs.
Table 1–5 lists the transceiver PMA features.
Table 1–5. Transceiver PMA Features for Arria V Devices
Features
Capability
Up to 16” FR4 PCB fabric drive capability at up
to 6.5536 Gbps
Backplane support
Chip-to-chip support
Up to 10.3125 Gbps
PLL-based clock recovery
Superior jitter tolerance
Programmable serializer and deserializer
(SERDES)
Flexible SERDES width
Up to 6 dB of pre-emphasis and 4 dB of
equalization
Equalization and pre-emphasis
Ring oscillator transmit PLLs
Input reference clock range
611 Mbps to 10.3125 Gbps
27 MHz to 710 MHz
Allows reconfiguration of single channels
without affecting operation of other channels
Transceiver dynamic reconfiguration
PCS Support
The Arria V core logic connects to the PCS through an 8-, 10-, 16-, 20-, 32-, or 40-bit
interface, depending on the transceiver data rate and protocol. Arria V devices
contain PCS hard IP to support PCIe Gen1 and Gen2, XAUI, GbE, Serial
RapidIO® (SRIO), and CPRI protocols. All other standard and proprietary protocols
from 611 Mbps to 6.5536 Gbps are supported through the custom double-width mode
(up to 6.5536 Gbps) and custom single-width mode (up to 3.75 Gbps) transceiver PCS
hard IP. A dedicated 80-bit interface to the core logic connects directly from the PMA,
bypassing the PCS hard IP, to support all protocols beyond 6.5536 Gbps up to 10.3125
Gbps.
Table 1–6 lists the transceiver PCS features.
Table 1–6. Transceiver PCS Features for Arria V Devices (Part 1 of 2)
(1)
PCS Support
Data Rates (Gbps)
Transmitter Data Path
Receiver Data Path
Word aligner, 8B/10B decoder, byte
deserializer, and phase
compensation FIFO
Custom single- and
double-width modes
Phase compensation FIFO, byte
serializer, and 8B/10B encoder
0.61 to ~6.5536
The same as custom single- and
double-width modes, plus rate
match FIFO and PIPE 2.0 interface
to the core logic
The same as custom single- and
double-width modes, plus PIPE 2.0
interface to the core logic
PCIe Gen1: x1, x2, x4, x8
PCIe Gen2: x1, x2, x4
2.5 and 5.0
1.25
(2)
The same as custom single- and
double-width modes, plus rate
match FIFO
The same as custom single- and
double-width modes
GbE
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 1: Overview for the Arria V Device Family
1–9
Low-Power Serial Transceivers
Table 1–6. Transceiver PCS Features for Arria V Devices (Part 2 of 2)
(1)
PCS Support
Data Rates (Gbps)
Transmitter Data Path
Receiver Data Path
The same as custom single- and
The same as custom single- and
double-width modes, plus the XAUI double-width modes, plus the XAUI
XAUI
3.125
state machine for bonding four
channels
state machine for realigning four
channels, and deskew FIFO circuitry
The same as custom single- and
double-width modes
The same as custom single- and
double-width modes
SRIO
SDI
1.25 to 6.25
Phase compensation FIFO, byte
serializer
Byte deserializer and phase
compensation FIFO
0.27 (3), 1.485, 2.97
Phase compensation FIFO, byte
deserializer, word aligner, and
8B/10B decoder
Phase compensation FIFO, byte
serializer, 8B/10B encoder
Serial ATA
CPRI (4)
1.5, 3.0, 6.0
The same as custom single- and
double-width modes, plus the TX
deterministic latency
The same as custom single- and
double-width modes, plus the RX
deterministic latency
0.6144 to 6.144
1.25 and 2.5
Phase compensation FIFO and byte Phase compensation FIFO and byte
serializer deserializer
(5)
GPON
Notes to Table 1–6:
(1) Data rates above 6.5536 Gbps up to 10.3125 Gbps, such as 10GBASE-R, are supported through soft PCS.
(2) PCIe Gen2 is supported with the PCIe hard IP only.
(3) The 0.27-Gbps data rate is supported using oversampling user logics that you must implement in the FPGA fabric.
(4) CPRI data rates above 6.5536 Gbps, such as 9.8304 Gbps, are supported through soft PCS.
(5) The GPON standard does not support burst mode.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–10
Chapter 1: Overview for the Arria V Device Family
PCIe Gen1 and Gen2 Hard IP
PCIe Gen1 and Gen2 Hard IP
Arria V devices contain PCIe hard IP designed for performance, ease-of-use, and
increased functionality. The PCIe hard IP consists of the PHY MAC, data link, and
transaction layers. The PCIe hard IP supports PCIe Gen2 end point and root port for
up to x4 lane configurations, and PCIe Gen1 end point and root port for up to x8 lane
configurations. PCIe endpoint support includes multifunction support for up to eight
functions, as shown in Figure 1–2.
Figure 1–2. PCIe Multifunction for Arria V Devices
FPGA
Host CPU
PCIe Link
Root
Complex
Local
Local
Periph 1
Periph 2
The Arria V PCIe hard IP operates independently from the core logic, which allows
the PCIe link to wake up and complete link training in less than 100 ms, while the
Arria V device completes loading the programming file for the rest of the device. In
addition, the Arria V PCIe hard IP has improved end-to-end data path protection
using ECC.
FPGA GPIOs
Arria V devices offer highly configurable GPIOs. The following list describes the
many features of the GPIOs:
■
Programmable bus hold and weak pull-up.
■
LVDS output buffer with programmable differential output voltage (VOD) and
programmable pre-emphasis.
■
■
Dynamic on-chip parallel termination (RT OCT) for all I/O banks with OCT
calibration to limit the termination impedance variation.
On-chip dynamic termination to swap between serial and parallel termination,
depending on whether there is reading or writing on a common bus for signal
integrity.
■
■
Configurable unused voltage reference (VREF) pins as user I/Os.
Easy timing closure support using the hardened read FIFO in the input register
path, and delay-locked loop (DLL) delay chain with fine and coarse architecture.
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 1: Overview for the Arria V Device Family
1–11
External Memory
External Memory
Arria V devices support up to four hardened memory controllers for DDR3 and
DDR2 SDRAM. Each controller supports 8- to 32-bit components up to 4 gigabits (Gb)
in density with two-chip select and optional ECC. Arria V devices do not support
DDR3 SDRAM leveling.
Arria V devices also support soft memory controllers for DDR3, DDR2, LPDDR2, and
LPDDR SDRAM, RLDRAM II, QDR II, and QDR II+ SRAM for maximum flexibility.
Table 1–7 lists the external memory interface block performance.
Table 1–7. External Memory Interface Performance for Arria V Devices
Interface
Voltage (V)
1.5
Hard Controller (MHz) Soft Controller (MHz)
533
533
400
400
667
667
400
400
400
400
400
400
400
400
400
400
200
400
DDR3 SDRAM
1.35
1.25
1.8
DDR2 SDRAM
RLDRAM II
1.5
400
(1)
1.8
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
1.8
QDR II+ SRAM
1.5
1.8
QDR II SRAM
1.5
1.8
DDR II+ SRAM (2)
1.5
LPDDR SDRAM (2)
LPDDR2 SDRAM (2)
Notes to Table 1–7:
1.8
1.2
(1) These memory interfaces are not supported in the hard memory controller.
®
(2) These memory interfaces are not available as Altera IP.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–12
Chapter 1: Overview for the Arria V Device Family
ALM
ALM
Arria V devices use a 28-nm ALM as the basic building block of the device fabric. The
ALM shown in Figure 1–3 uses an 8-input fracturable look-up table (LUT) with four
dedicated registers to help improve timing closure in register-rich designs and
achieve an even higher design packing capability than previous generations.
You can configure up to 25% of the ALMs in Arria V devices as distributed MLABs.
For more information, refer to “Embedded Memory” on page 1–14.
Figure 1–3. ALM for Arria V Devices
Reg
1
Full
Adder
2
3
4
5
6
7
Reg
Reg
Adaptive
LUT
8
Full
Adder
Reg
Variable-Precision DSP Block
Arria V devices feature a variable-precision DSP block that you can configure to
support signal processing with precision ranging from 9 x 9, 18 x 19, and 27 x 27 bits
natively.
You can independently configure each DSP block during compilation as a triple 9 x 9,
a dual 18 x 19 multiply, or a single 27 x 27. With a dedicated 64-bit cascade bus, you
can cascade multiple variable-precision DSP blocks to implement even higher
precision DSP functions efficiently.
The variable precision DSP block also supports these features:
■
■
■
■
■
■
■
■
■
64-bit accumulator that is the largest in the industry,
Double accumulator
Hard pre-adder that is available in both 18- and 27-bit modes
Cascaded output adders for efficient systolic FIR filters
Dynamic coefficients
18-bit internal coefficient register banks
Enhanced independent multiplier operation
Efficient support for single floating point arithmetic
Inferability of all modes by the Altera Complete Design Suite
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 1: Overview for the Arria V Device Family
1–13
Variable-Precision DSP Block
Table 1–8 lists the accommodation of different configurations in a DSP block.
Table 1–8. Variable-Precision DSP Block Configurations for Arria V Devices
Multiplier Size (Bit)
Three 9 x 9
DSP Block Resources
Expected Usage
1 variable-precision DSP block
1 of variable-precision DSP block
Low precision fixed point for video applications
Medium precision fixed point in FIR filters
Two18 x 19
Two 18 x 19 with
accumulate
1 variable-precision DSP block
1 variable-precision DSP block
FIR filters
One 27 x 27
Single precision floating point
Table 1–9 lists the number of multipliers in Arria V devices.
Table 1–9. Number of Multipliers in Arria V Devices
Independent Input and Output
Multiplications Operator
18 x 18
Multiplier
Adder
Variable
18 x 19
Multiplier
Adder Mode
Variants
Devices
Precision
Summed
with 36-bit
Input
9 x 9
18 x 19
Multipliers
27 x 27
Multipliers
DSP Blocks
Multipliers
5AGXA1
5AGXA3
5AGXA5
5AGXA7
5AGXB1
5AGXB3
5AGXB5
5AGXB7
5AGTD3
5AGTD7
5ASXB3
5ASXB5
5ASTD3
5ASTD5
240
396
720
480
240
396
240
396
240
396
1,188
1,800
2,400
2,760
3,135
3,276
3,417
3,135
3,417
2,427
3,204
2,427
3,204
792
600
1,200
1,600
1,840
2,090
2,184
2,278
2,090
2,278
1,618
2,136
1,618
2,136
600
600
600
800
800
800
800
Arria V GX
920
920
920
920
1,045
1,092
1,139
1,045
1,139
809
1,045
1,092
1,139
1,045
1,139
809
1,045
1,092
1,139
1,045
1,139
809
1,045
1,092
1,139
1,045
1,139
809
Arria V GT
Arria V SX
Arria V ST
1,068
809
1068
809
1,068
809
1,068
809
1,068
1068
1,068
1,068
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–14
Chapter 1: Overview for the Arria V Device Family
Embedded Memory
Embedded Memory
The Arria V memory blocks are flexible and designed to provide an optimal amount
of small- and large-sized memory arrays. Arria V devices contain two types of
embedded memory blocks:
■
640-bit MLAB blocks—for wide and shallow memories. You can use up to 25% of
the device LABs as MLAB. The MLAB operates at up to 500 MHz.
■
10-Kb M10K blocks—for larger memory configurations. The M10K embedded
memory operates at up to 400 MHz.
Table 1–10 lists the supported memory configurations for Arria V devices.
Table 1–10. Embedded Memory Block Configuration for Arria V Devices
Memory Block
Depth (bits)
Programmable Widths
x16, x18, or x20
x40 or x32
x20 or x16
x10 or x8
x5 or x4
MLAB
32
256
512
1K
M10K
2K
4K
x2
8K
x1
Dynamic and Partial Reconfiguration
Dynamic reconfiguration enables transceiver data rates or encoding schemes to be
changed dynamically while maintaining data transfer on adjacent transceiver
channels in Arria V devices. Dynamic reconfiguration is ideal for applications
requiring on-the-fly multi-protocol or multi-rate support. You can reconfigure the
PMA, PCS, and PCIe hard IP blocks with dynamic reconfiguration.
Partial reconfiguration allows you to reconfigure part of the device while other
sections remain running. Partial reconfiguration is required in systems where the
uptime is critical because it allows you to make updates or adjust functionality
without disrupting other services. While lowering power and cost, partial
reconfiguration also increases the effective logic density by removing the necessity to
place the device functions that do not operate simultaneously. Instead, you can store
these functions in external memory and load them as required. This reduces the size
of the required device by allowing multiple applications on a single device, which
saves board space and reduces power consumption.
Altera simplifies the time-intensive task of partial reconfiguration by building the
partial reconfiguration capability on top of the proven incremental compile and
design flow in the Quartus® II software. With this Altera solution, you do not need to
know all the intricate device architecture details to perform a partial reconfiguration.
Partial reconfiguration is supported through the FPP x16 configuration interface. You
can seamlessly use partial reconfiguration in tandem with dynamic reconfiguration to
enable partial reconfiguration of both the core and transceiver simultaneously.
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 1: Overview for the Arria V Device Family
1–15
Clock Networks and PLL Clock Sources
Clock Networks and PLL Clock Sources
The Arria V clock network architecture is based on Altera’s proven global, quadrant,
and peripheral clock structure, which is supported by dedicated clock input pins and
fractional PLLs. Arria V devices have 16 global clock networks capable of up to
625 MHz operation. The Quartus II software identifies all unused sections of the clock
network and powers them down, which reduces power consumption.
Arria V devices have up to 16 PLLs with 18 output counters per PLL. One fractional
PLL can use up to 18 output counters and two adjacent fractional PLLs share the 18
output counters. You can use fractional PLLs to reduce the number of oscillators
required on your board, as well as reduce the clock pins used in the device by
synthesizing multiple clock frequencies from a single reference clock source. You can
use the PLLs for frequency synthesis, on-chip clock deskew, jitter attenuation,
dynamic phase-shift, zero delay buffers, counters reconfiguration, bandwidth
reconfiguration, programmable output clock duty cycles, PLL cascading, and
reference clock switchover.
Arria V devices use a fractional PLL architecture in addition to the historical integer
PLL. When you use fractional PLL mode, you can use the PLLs for precision
fractional-N frequency synthesis—removing the need for an off-chip reference clock.
Transceiver fractional PLLs, when not used by the Transceiver I/O, can be used as
general-purpose fractional PLLs by the FPGA fabric.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–16
Chapter 1: Overview for the Arria V Device Family
Enhanced Configuration and Configuration via Protocol
Enhanced Configuration and Configuration via Protocol
Arria V devices support 3.3-V programming voltage and the following configuration
modes:
■
■
■
■
■
■
active serial (AS)
passive serial (PS)
fast passive parallel (FPP)
CvP
Configuration via HPS
configuration through JTAG
You can configure Arria V devices through PCIe using CvP instead of an external
flash or ROM. The CvP mode offers the fastest configuration rate and flexibility with
the easy-to-use PCIe hard IP block interface. The Arria V CvP implementation
conforms to the PCIe 100-ms power-up-to-active time requirement.
f
For more information regarding CvP, refer to the Configuration via Protocol (CvP)
Implementation in Altera FPGAs User Guide.
Table 1–11 lists the configuration modes that Arria V devices support.
Table 1–11. Configuration Modes and Features for Arria V Devices
Maximum
Clock Rate
(MHz)
Maximum
Data Rate Decompression
(Mbps)
Remote
System
Update
Design
Security
Partial
Reconfiguration
Mode
Data Width (Bit)
AS
PS
1, 4
1
100
125
—
v
v
v
v
v
—
—
125
—
Parallel
flash loader
FPP
CvP
HPS
8, 16
125
—
—
—
—
33
v
v
v
—
v
v
v
—
16-bit only
x1, x2, x4, x8 (1)
v
v
v
—
Parallel
32
1
125
33
flash loader
JTAG
—
Note to Table 1–11:
(1) Number of lanes instead of bits.
Power Management
Arria V devices leverage FPGA architectural features and process technology
advancements to reduce the total device core power consumption by as much as 50%
when compared with Stratix IV devices at the same performance level.
Additionally, Arria V devices have a number of hard IP blocks that not only reduce
logic resources but also deliver substantial power savings when compared with soft
implementations. The list includes PCIe Gen1 and Gen2, XAUI, GbE, SRIO, GPON
and CPRI protocols. The hard IP blocks consume up to 25% less power than
equivalent soft implementations.
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 1: Overview for the Arria V Device Family
1–17
SoC FPGA with HPS
Arria V transceivers are also designed for power efficiency. As a result, the transceiver
channels consume 50% less power than the previous generation of Arria devices.
SoC FPGA with HPS
Each SoC FPGA device combines an FPGA fabric and an HPS in a single device. This
combination delivers the flexibility of programmable logic with the power and cost
savings of hard IP in the following ways:
■
■
■
Reduces board space, system power, and bill of materials cost by eliminating a
discrete embedded processor
Allows you to differentiate the end product in both the hardware and software,
and to support virtually any interface standard
Extends the product life and revenue through in-field hardware and software
updates
Features of the HPS
The HPS consists of a dual-core ARM Cortex-A9 MPCore processor, a rich set of
peripherals, and a shared multiport SDRAM memory controller, as shown in
Figure 1–4..
Figure 1–4. HPS with Dual-Core ARM Cortex-A9 MPCore Processor
Configuration
Controller
Lightweight
HPS-to-FPGA
FPGA Fabric
FPGA-to-HPS HPS-to-FPGA
FPGA-to-HPS SDRAM
FPGA
Manager
HPS
Ethernet
MAC (2x)
ARM Cortex-A9 MPCore
CPU0
(ARM Cortex-A9
with NEON/FPU,
CPU1
(ARM Cortex-A9
with NEON/FPU,
USB
OTG (2x)
64 KB
Boot
ROM
32 KB Instruction Cache, 32 KB Instruction Cache,
32 KB Data Cache, and 32 KB Data Cache, and
Memory Management Unit) Memory Management Unit)
NAND Flash
Controller
Multiport
DDR SDRAM
Controller
with
SD/MMC/SDIO
Controller
Level 3
Interconnect
ACP
SCU
Optional ECC
DMA
Controller
L2 Cache (512 KB)
64 KB
On-Chip
RAM
ETR
(Trace)
Debug
Access Port
Low Speed Peripherals
(Timers, GPIOs, UART, SPI, I2C, Quad SPI Flash Controller, System Manager, Clock Manager, Reset Manager, and Scan Manager)
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–18
Chapter 1: Overview for the Arria V Device Family
SoC FPGA with HPS
System Peripherals
The Ethernet MAC, USB OTG controller, NAND flash controller and SD/MMC/SDIO
controller modules have an integrated DMA controller. For modules without an
integrated DMA controller, an additional DMA controller module provides up to
eight channels for high-bandwidth data transfers. The debug access port provides
interfaces to industry standard JTAG debug probes and supports ARM CoreSight
debug and core traces to facilitate software development.
HPS-FPGA AXI Bridges
The HPS–FPGA bridges, which support the Advanced Microcontroller Bus
Architecture (AMBA®) Advanced eXtensible Interface (AXI™) specifications, consist
of the following bridges:
■
■
■
FPGA-to-HPS AXI bridge—a high-performance bus supporting 32-, 64-, and
128-bit data widths that allows the FPGA fabric to master transactions to the slaves
in the HPS
HPS-to-FPGA AXI bridge—a high-performance bus supporting 32-, 64-, and
128-bit data widths that allows the HPS to master transactions to the slaves in the
FPGA fabric.
Lightweight HPS-to-FPGA AXI bridge—a lower performance 32-bit width bus
that allows the HPS to master transactions to the slaves in the FPGA fabric.
The HPS–FPGA AXI bridges also allow the FPGA fabric to access the memory shared
by one or both microprocessors, and provide asynchronous clock crossing with the
clock from the FPGA fabric.
HPS SDRAM Controller Subsystem
The HPS SDRAM controller subsystem contains a multiport SDRAM controller and
DDR PHY that is shared between the FPGA fabric (through the
FPGA-to-HPS SDRAM interface), the level 2 (L2) cache, and the level 3 (L3) system
interconnect. The FPGA-to-HPS SDRAM interface supports AMBA AXI and Avalon®
Memory-Mapped (Avalon-MM) interface standards, and provides up to four ports
with separate read and write directions.
To maximize memory performance, the HPS SDRAM controller subsystem supports
command and data reordering, deficit round-robin arbitration with aging, and
high-priority bypass features. The HPS SDRAM controller subsystem supports DDR2,
DDR3, LPDDR, or LPDDR2 devices up to 4 Gb and runs up to 533 MHz (1066 Mbps
data rate).
For easy migration, the FPGA-to-HPS SDRAM interface is compatible with the
interface of the soft SDRAM memory controller IPs and hard SDRAM memory
controllers in the FPGA fabric.
FPGA Configuration and Processor Booting
The FPGA fabric and HPS in the SoC FPGA are powered independently. You can
reduce the clock frequencies or gate the clocks to reduce dynamic power, or shut
down the entire FPGA fabric to reduce total system power.
You can configure the FPGA fabric and boot the HPS independently, in any order,
providing you with more design flexibility:
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 1: Overview for the Arria V Device Family
1–19
SoC FPGA with HPS
■
■
You can boot the HPS before you power up and configure the FPGA fabric. After
the system is running, the HPS reconfigures the FPGA fabric at any time under
program control or through the FPGA configuration controller.
You can power up both the HPS and the FPGA fabric together, configure the FPGA
fabric first, and then upload the boot code to the HPS from the FPGA fabric.
Hardware and Software Development
For hardware development, you can configure the HPS and connect your soft logic in
the FPGA fabric to the HPS interfaces using the Qsys system integration tool in the
Quartus II software.
For software development, the ARM-based SoC FPGA devices inherit the rich
software development ecosystem available for the ARM Cortex-A9 MPCore
processor. The software development process for Altera SoC FPGAs follows the same
steps as those for other SoC devices. Altera also provides support for the Linux and
VxWorks® operating systems.
You can begin device-specific firmware and software development on the Altera
SoC FPGA Virtual Target. The Virtual Target is a PC-based fast-functional simulation
of a target development system—a model of a complete development board that runs
on a PC. The Virtual Target enables the development of device-specific production
software that can run unmodified on actual hardware.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–20
Chapter 1: Overview for the Arria V Device Family
Ordering Information
Ordering Information
This section describes the ordering information for Arria V devices.
Figure 1–5 and Figure 1–6 show the ordering codes for Arria V devices.
Figure 1–5. Ordering Information for Arria V GX and GT Devices
PackageType
Transceiver Count
Embedded Hard IPs
F
: FineLine BGA (FBGA)
D
E
: 9
: 12
B
: No hard PCIe or hard
memory controller
G : 18
OperatingTemperature
M : 1 hard PCIe and 2 hard
memory controller
H
K
: 24
: 36
C
I
: Commercial temperature (TJ = 0° C to 85° C)
: Industrial temperature (TJ = -40° C to 100° C)
F
: Maximum 2 hard PCIe and
4 hard memory controllers
Optional Suffix
Indicates specific device
options or shipment method
Family Signature
5A GX
M
A5
G
4
F
31
C
4
N
5A : Arria V
N
: Lead-free packaging
ES : Engineering sample
FPGA Fabric Speed Grade
Family Variant
GX : 6-Gbps transceivers
GT : 10-Gbps transceivers
Package Code
GX Variant
4 (fastest)
FBGA PackageType
27 : 672 pins
31 : 896 pins
Member Code
GX Variant
5
6
Transceiver Speed Grade
GX Variant
35 : 1,152 pins
40 : 1,517 pins
A1: 75K logic elements
A3: 149K logic elements
A5: 190K logic elements
A7: 243K logic elements
B1: 300K logic elements
B3: 362K logic elements
B5: 420K logic elements
B7: 503K logic elements
GT Variant
GT Variant
5
4
6
: 6-Gbps
: 3-Gbps
GT Variant
: 10-Gbps
3
D3: 362K logic elements
D7: 503K logic elements
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 1: Overview for the Arria V Device Family
1–21
Document Revision History
Figure 1–6. Ordering Information for Arria V SX and ST Devices
Transceiver Count
SX Variant
(6-Gbps)
Embedded Hard IPs
D
E
: 9
: 12
PackageType
B
: No hard PCIe or hard
memory controller
F
: FineLine BGA (FBGA)
G : 18
: 24
ST Variant
M : 1 hard PCIe and 2 hard
memory controller
H
OperatingTemperature
F
: Maximum 2 hard PCIe and
3 hard memory controllers
(6-Gbps, 10-Gbps)
C
I
: Commercial temperature (TJ = 0° C to 85° C)
: Industrial temperature (TJ = -40° C to 100° C)
E
: 6, 2
G : 18, 2
: 12, 6
(These numbers do not include the
hard memory controllers in the HPS)
K
Optional Suffix
Indicates specific device
options or shipment method
Family Signature
5A : Arria V
5A
ST
F
D5
K
4
F
40
I
5
N
N
: Lead-free packaging
ES : Engineering sample
FPGA Fabric Speed Grade
Family Variant
SX : 6-Gbps transceivers
ST : 10-Gbps transceivers
Package Code
SX Variant
4 (fastest)
FBGA PackageType
31 : 896 pins
Member Code
5
6
35 : 1,152 pins
40 : 1,517 pins
SX Variant
B3 : 350K logic elements
B5 : 460K logic elements
Transceiver Speed Grade
SX Variant
ST Variant
5
4
6
: 6-Gbps
: 3-Gbps
ST Variant
D3 : 350K logic elements
D5 : 460K logic elements
ST Variant
: 10-Gbps
3
Document Revision History
Table 1–12 lists the revision history for this chapter.
Table 1–12. Document Revision History
Date
Version
1.3
Changes
■ Updated Table 1–2 and Table 1–3.
■ Updated Figure 1–5 and Figure 1–6.
■ Minor text edits.
February 2012
December 2011
1.2
■ Minor text edits.
■ Updated Table 1–1, Table 1–2, Table 1–3, Table 1–4, Table 1–6, Table 1–7, Table 1–9, and
Table 1–10.
■ Added “SoC FPGA with HPS” section.
■ Updated “Clock Networks and PLL Clock Sources” and “Ordering Information” sections.
November 2011
August 2011
1.1
1.0
■ Updated Figure 1–5.
■ Added Figure 1–6.
■ Minor text edits.
Initial release.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
1–22
Chapter 1: Overview for the Arria V Device Family
Document Revision History
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
2. Device Datasheet for Arria V Devices
February 2012
AV-51002-1.3
AV-51002-1.3
This chapter describes the electrical characteristics, switching characteristics, and
configuration specifications for Arria® V devices. Electrical characteristics include
operating conditions and power consumption. Switching characteristics include
transceiver specifications, and core and periphery performance. Configuration
specifications include power-on reset (POR) specification, initialization clock source
option and timing, various configuration mode timing parameters, remote system
upgrades timing, and user watchdog internal oscillator frequency specification. This
chapter also describes I/O timing, including programmable I/O element (IOE) delay
and programmable output buffer delay.
f
For more information about the densities and packages of devices in the Arria V
family, refer to the Overview for Arria V Device Family chapter.
Electrical Characteristics
The following sections describe the electrical characteristics of Arria V devices.
Operating Conditions
When you use Arria V devices, they are rated according to a set of defined
parameters. To maintain the highest possible performance and reliability of the
Arria V devices, you must consider the operating requirements described in this
chapter.
Arria V devices are offered in commercial and industrial grades. Commercial devices
are offered in –4 (fastest), –5, and –6 speed grades. Industrial grade devices are offered
in the –5 speed grade.
Absolute Maximum Ratings
Absolute maximum ratings define the maximum operating conditions for Arria V
devices. The values are based on experiments conducted with the devices and
theoretical modeling of breakdown and damage mechanisms. The functional
operation of the device is not implied for these conditions.
© 2012 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos
are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance of its
semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any products and
services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service
described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying
on any published information and before placing orders for products or services.
ISO
9001:2008
Registered
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012
Subscribe
2–2
Chapter 2: Device Datasheet for Arria V Devices
Electrical Characteristics
c
Conditions other than those listed in Table 2–1 may cause permanent damage to the
device. Additionally, device operation at the absolute maximum ratings for extended
periods of time may have adverse effects on the device.
Table 2–1. Absolute Maximum Ratings for Arria V Devices—Preliminary
Symbol Description
VCC
Minimum
Maximum
Unit
Core voltage power supply
–0.5
1.35
V
Periphery circuitry, PCIe® hard IP block, and transceiver physical
coding sublayer (PCS) power supply
VCCP
–0.5
1.35
V
VCCPGM
VCCAUX
VCCBAT
VCCPD
Configuration pins power supply
Auxiliary supply
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–25
3.75
3.75
3.75
3.75
3.9
V
V
Battery back-up power supply for design security volatile key register
I/O pre-driver power supply
I/O power supply
V
V
VCCIO
V
VCCD_FPLL
VCCA_FPLL
VCCA_GXB
VCCH_GXB
VCCR_GXB
VCCT_GXB
VCCL_GXB
VI
Phase-locked loop (PLL) digital power supply
PLL analog power supply
Transceiver high voltage power
Transmitter output buffer power
Receiver power
1.8
V
3.75
3.75
1.8
V
V
V
1.21
1.21
1.21
4
V
Transmitter power
V
Clock network power
V
DC input voltage
V
IOUT
DC output current per pin
Operating junction temperature
Storage temperature (No bias)
Core voltage power supply
I/O pre-driver power supply
I/O power supply
40
mA
°C
°C
V
TJ
–55
125
150
1.35
3.75
3.9
TSTG
–65
VCC_HPS
VCCPD_HPS
VCCIO_HPS
–0.5
–0.5
–0.5
–0.5
–0.5
V
V
VCCRSTCLK_HPS Configuration pins power supply
VCCPLL_HPS PLL analog power supply
3.75
3.75
V
V
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–3
Electrical Characteristics
Maximum Allowed Overshoot and Undershoot Voltage
During transitions, input signals may overshoot to the voltage listed in Table 2–2 and
undershoot to –2.0 V for input currents less than 100 mA and periods shorter than
20 ns.
Table 2–2 lists the maximum allowed input overshoot voltage and the duration of the
overshoot voltage as a percentage of device lifetime. The maximum allowed
overshoot duration is specified as a percentage of high time over the lifetime of the
device. A DC signal is equivalent to 100% duty cycle. For example, a signal that
overshoots to 3.95 V can only be at 3.95 V for ~5% over the lifetime of the device; for a
device lifetime of 10 years, this amounts to half a year.
Table 2–2. Maximum Allowed Overshoot During Transitions for Arria V Devices—Preliminary
Overshoot Duration as %
Symbol
Description
Condition (V)
Unit
of High Time
3.7
3.75
3.8
100
%
%
%
%
%
%
%
%
%
59.79
33.08
18.45
10.36
5.87
3.85
3.9
Vi (AC)
AC input voltage
3.95
4
3.34
4.05
4.1
1.92
1.11
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–4
Chapter 2: Device Datasheet for Arria V Devices
Electrical Characteristics
Recommended Operating Conditions
This section lists the functional operation limits for the AC and DC parameters for
Arria V devices. Table 2–3 lists the steady-state voltage values expected from Arria V
devices. Power supply ramps must all be strictly monotonic, without plateaus.
Table 2–3. Recommended Operating Conditions for Arria V Devices—Preliminary
Symbol
VCC
Description
Condition
Minimum
Typical
Maximum Unit
Core voltage power supply
—
1.07
1.1
1.13
V
Periphery circuitry, PCIe hard IP block, and
transceiver PCS power supply
VCCP
—
1.07
1.1
1.13
V
VCCAUX
Auxiliary supply
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.375
3.135
2.85
2.5
3.3
3.0
2.5
3.3
3.0
2.5
1.8
1.5
1.35
1.25
1.2
3.3
3.0
2.5
1.8
2.5
1.5
2.625
3.465
3.15
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
I/O pre-driver (3.3 V) power supply
I/O pre-driver (3.0 V) power supply
I/O pre-driver (2.5 V) power supply
I/O buffers (3.3 V) power supply
I/O buffers (3.0 V) power supply
I/O buffers (2.5 V) power supply
I/O buffers (1.8 V) power supply
I/O buffers (1.5 V) power supply
I/O buffers (1.35 V) power supply
I/O buffers (1.25 V) power supply
I/O buffers (1.2 V) power supply
Configuration pins (3.3 V) power supply
Configuration pins (3.0 V) power supply
Configuration pins (2.5 V) power supply
Configuration pins (1.8 V) power supply
PLL analog voltage regulator power supply
PLL digital voltage regulator power supply
(1)
VCCPD
2.375
3.135
2.85
2.625
3.465
3.15
2.375
1.71
2.625
1.89
VCCIO
1.425
1.283
1.19
1.575
1.418
1.31
1.14
1.26
3.135
2.85
3.465
3.15
VCCPGM
2.375
1.71
2.625
1.89
VCCA_FPLL
VCCD_FPLL
2.375
1.425
2.625
1.575
Battery back-up power supply
(For design security volatile key register)
(2)
VCCBAT
—
1.2
—
3.0
V
VI
DC input voltage
Output voltage
—
—
–0.5
0
—
—
—
—
3.6
VCCIO
85
V
V
VO
Commercial
Industrial
0
°C
°C
TJ
Operating junction temperature
–40
100
Slow POR
(PORSEL=0)
200 µs
200 µs
—
—
100 ms
4 ms
—
—
(3)
tRAMP
Power supply ramp time
Fast POR
(PORSEL=1)
Notes to Table 2–3:
(1) VCCPD must be 2.5 V when VCCIO is 2.5, 1.8, 1.5, 1.35, 1.25 or 1.2 V. VCCPD must be 3.0 V when VCCIO is 3.0 V.
(2) If you do not use the design security feature in Arria V devices, connect VCCBAT to a 1.5-V, 2.5-V or 3.0-V power supply. Arria V POR circuitry
monitors VCCBAT. Arria V devices do not exit POR if VCCBAT stays low.
(3) When power is applied to an Arria V device, a POR occurs if the power supply reaches the recommended operating range in the maximum
power supply ramp.
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–5
Electrical Characteristics
Table 2–4 lists the transceiver power supply recommended operating conditions for
Arria V devices.
Table 2–4. Transceiver Power Supply Operating Conditions for Arria V GX and GT Devices—Preliminary
Symbol
VCCA_GXBL
Description
Transceiver high voltage power (left side)
Transceiver high voltage power (right side)
Receiver power (left side)
Minimum
Typical
Maximum
Unit
2.375
2.5
2.625
V
V
V
V
VCCA_GXBR
VCCR_GXBL
VCCR_GXBR
VCCT_GXBL
VCCT_GXBR
VCCH_GXBL
VCCH_GXBR
VCCL_GXBL
VCCL_GXBR
1.07
1.07
1.1
1.1
1.5
1.13
1.13
Receiver power (right side)
Transmitter power (left side)
Transmitter power (right side)
Transmitter output buffer power (left side)
Transmitter output buffer power (right side)
Clock network power (left side)
Clock network power (right side)
1.425
1.575
1.07
1.07
1.1
1.1
1.13
1.13
V
V
Table 2–5 lists the steady-state voltage and current values expected from Arria V
system-on-a-chip (SoC) FPGA with ARM®-based hard processor system (HPS). Power
supply ramps must all be strictly monotonic, without plateaus.
Table 2–5. HPS Power Supply Operating Conditions for Arria V SX and ST Devices—Preliminary
Symbol
VCC_HPS
Description
Minimum
1.07
Typical
1.1
3.3
3.0
2.5
3.3
3.0
2.5
1.8
1.5
1.2
3.3
3.0
2.5
1.8
2.5
Maximum
1.13
Unit
V
HPS Core voltage and periphery circuitry power supply
HPS I/O pre-driver (3.3 V) power supply
HPS I/O pre-driver (3.0 V) power supply
HPS I/O pre-driver (2.5 V) power supply
HPS I/O buffers (3.3 V) power supply
3.135
2.85
3.465
3.15
V
VCCPD_HPS
V
2.375
3.135
2.85
2.625
3.465
3.15
V
V
HPS I/O buffers (3.0 V) power supply
V
HPS I/O buffers (2.5 V) power supply
2.375
1.71
2.625
1.89
V
VCCIO_HPS
HPS I/O buffers (1.8 V) power supply
V
HPS I/O buffers (1.5 V) power supply
1.425
1.14
1.575
1.26
V
HPS I/O buffers (1.2 V) power supply
V
HPS reset and clock input pins (3.3 V) power supply
HPS reset and clock input pins (3.0 V) power supply
HPS reset and clock input pins (2.5 V) power supply
HPS reset and clock input pins (1.8 V) power supply
HPS PLL analog voltage regulator power supply
3.135
2.85
3.465
3.15
V
V
VCCRSTCLK_HPS
2.375
1.71
2.625
1.89
V
V
VCCPLL_HPS
2.375
2.625
V
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–6
Chapter 2: Device Datasheet for Arria V Devices
Electrical Characteristics
DC Characteristics
This section lists the supply current, I/O pin leakage current, input pin capacitance,
on-chip termination tolerance, and hot socketing specifications.
Supply Current
Standby current is the current drawn from the respective power rails used for power
budgeting. Use the Excel-based Early Power Estimator (EPE) to estimate supply
current for your design because these currents vary greatly with the resources you
use.
f
For more information about power estimation tools, refer to the PowerPlay Early Power
Estimator User Guide and the PowerPlay Power Analysis chapter in the Quartus II
Handbook.
I/O Pin Leakage Current
Table 2–6 lists the Arria V I/O pin leakage current specifications.
Table 2–6. I/O Pin Leakage Current for Arria V Devices—Preliminary
Symbol
II
IOZ
Description
Input pin
Tri-stated I/O pin
Conditions
VI = 0 V to VCCIOMAX
VO = 0 V to VCCIOMAX
Min
–30
–30
Typ
—
Max
30
Unit
µA
—
30
µA
Bus Hold Specifications
Table 2–7 lists the Arria V device bus hold specifications.
Table 2–7. Bus Hold Parameters for Arria V Devices—Preliminary (1) (Part 1 of 2)
VCCIO (V)
Parameter Symbol Conditions
1.2
1.5
1.8
2.5
3.0
3.3
Unit
Min Max
Min
Max
Min Max Min Max Min Max Min Max
Bus-hold,
low,
sustaining
current
VIN > VIL
(max.)
ISUSL
ISUSH
IODL
8
—
—
12
—
30
–30
—
—
—
50
–50
—
—
—
70
–70
—
—
—
70
-70
—
—
—
µA
µA
µA
Bus-hold,
high,
sustaining
current
VIN < VIH
(min.)
–8
—
–12
—
—
Bus-hold,
low,
overdrive
current
0V < VIN <
VCCIO
125
175
200
300
500
500
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 2: Device Datasheet for Arria V Devices
2–7
Electrical Characteristics
Table 2–7. Bus Hold Parameters for Arria V Devices—Preliminary (1) (Part 2 of 2)
V
CCIO (V)
Parameter Symbol Conditions
1.2
1.5
1.8
2.5
3.0
3.3
Unit
Min Max
Min
Max
Min Max Min Max Min Max Min Max
Bus-hold,
high,
overdrive
current
0V < VIN <
VCCIO
IODH
—
-125
0.9
—
-175
—
-200
—
-300
1.7
—
-500
2
—
-500 µA
Bus-hold
trip point
VTRIP
—
0.3
0.375 1.125 0.68 1.07 0.7
0.8
0.8
2
V
Note to Table 2–7:
(1) The bus-hold trip points are based on calculated input voltages from the JEDEC standard.
(OCT) Specifications
If you enable on-chip termination (OCT) calibration, calibration is automatically
performed at power up for I/Os connected to the calibration block. Table 2–8 lists the
Arria V OCT termination calibration accuracy specifications.
Table 2–8. OCT Calibration Accuracy Specifications for Arria V Devices—Preliminary (1) (Part 1 of 2)
Calibration Accuracy
Symbol
Description
Conditions (V)
Unit
%
C4
C5, I5
C6
Internal series termination
with calibration
(25- setting)
V
V
CCIO = 3.0, 2.5, 1.8,
1.5, 1.2
25- RS
15
15
15
Internal series termination
with calibration
(50- setting)
CCIO = 3.0, 2.5, 1.8,
1.5, 1.2
50- RS
15
15
15
15
15
15
%
Internal series termination
with calibration
(34- and 40- setting)
VCCIO = 1.5, 1.35,
1.25, 1.2
34- and 40- RS
%
Internal series termination
with calibration
(48-, 60-, and 80-
setting)
48-60-and
80- RS
VCCIO = 1.2
15
15
15
%
%
Internal parallel
termination with
calibration (50- setting)
V
CCIO = 2.5, 1.8, 1.5,
1.2
50- RT
–10 to +40 –10 to +40 –10 to +40
Internal parallel
termination with
calibration
(20-, 30-, 40-,
60-, and 120- setting)
20-, 30-,
40-,60-and
120- RT
VCCIO = 1.5, 1.35, 1.25 –10 to +40 –10 to +40 –10 to +40
%
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–8
Chapter 2: Device Datasheet for Arria V Devices
Electrical Characteristics
Table 2–8. OCT Calibration Accuracy Specifications for Arria V Devices—Preliminary (1) (Part 2 of 2)
Calibration Accuracy
Symbol
Description
Internal parallel
Conditions (V)
Unit
C4
C5, I5
C6
termination with
calibration
60- and 120-RT
VCCIO = 1.2
–10 to +40 –10 to +40 –10 to +40
%
(60- and 120- setting)
Internal left shift series
termination with
calibration
VCCIO = 3.0, 2.5, 1.8,
1.5, 1.2
25- RS_left_shift
15
15
15
%
(25- RS_left_shift setting)
Note to Table 2–8:
(1) OCT calibration accuracy is valid at the time of calibration only.
Calibration accuracy for the calibrated on-chip series termination (RS OCT) and
on-chip parallel termination (RT OCT) are applicable at the moment of calibration.
When process, voltage, and temperature (PVT) conditions change after calibration,
the tolerance may change.
Table 2–9 lists the Arria V OCT without calibration resistance tolerance to PVT
changes.
Table 2–9. OCT Without Calibration Resistance Tolerance Specifications for Arria V Devices—Preliminary
Resistance Tolerance
Symbol
Description
Conditions (V)
VCCIO = 3.0 and 2.5
VCCIO = 1.8 and 1.5
VCCIO = 1.2
Unit
%
C4
C5, I5
C6
Internal series termination
without calibration
(25- setting)
25- RS
30
40
40
Internal series termination
without calibration
(25- setting)
25- RS
25- RS
50- RS
50- RS
30
35
30
30
40
50
40
40
40
50
40
40
%
Internal series termination
without calibration
(25- setting)
%
Internal series termination
without calibration (50-
setting)
VCCIO = 3.0 and 2.5
VCCIO = 1.8 and 1.5
VCCIO = 1.2
%
Internal series termination
without calibration
(50- setting)
%
Internal series termination
without calibration
(50- setting)
50- RS
35
25
50
50
%
%
Internal differential
termination (100- setting)
100- RD
V
CCIO = 2.5
TBD
TBD
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–9
Electrical Characteristics
OCT calibration is automatically performed at power up for OCT-enabled I/Os.
Table 2–10 lists OCT variation with temperature and voltage after power-up
calibration. Use Table 2–10 to determine the OCT variation after power-up calibration
and Equation 2–1 to determine the OCT variation without recalibration.
Equation 2–1. OCT Variation Without Recalibration—Preliminary (1), (2), (3), (4), (5), (6)
dR
dT
dR
dV
------
-------
V
ROCT = R
1 +
T
SCAL
Notes to Equation 2–1:
(1) The ROCT value calculated from Equation 2–1 shows the range of OCT resistance with the variation of temperature
and VCCIO
.
(2) RSCAL is the OCT resistance value at power-up.
(3) T is the variation of temperature with respect to the temperature at power up.
(4) V is the variation of voltage with respect to the VCCIO at power up.
(5) dR/dT is the percentage change of RSCAL with temperature.
(6) dR/dV is the percentage change of RSCAL with voltage.
Table 2–10 lists the OCT variation after the power-up calibration.
(1)
Table 2–10. OCT Variation after Power-Up Calibration for Arria V Devices—Preliminary
Symbol
Description
VCCIO (V)
3.0
Value
0.0297
0.0344
0.0499
0.0744
0.1241
0.189
Unit
2.5
OCT variation of voltage without
recalibration
dR/dV
1.8
%/mV
%/°C
1.5
1.2
3.0
2.5
0.208
OCT variation of temperature without
recalibration
dR/dT
1.8
0.266
1.5
0.273
1.2
0.317
Note to Table 2–10:
(1) Valid for a VCCIO range of 5% and temperature range of 0° to 85°C.
Pin Capacitance
Table 2–11 lists the Arria V pin capacitance.
Table 2–11. Pin Capacitance for Arria V Devices
Symbol
CIOTB
Description
Value
Unit
pF
Input capacitance on top/bottom I/O pins
Input capacitance on left/right I/O pins
5.5
5.5
5.5
CIOLR
pF
COUTFB
Input capacitance on dual-purpose clock output/feedback pins
pF
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–10
Chapter 2: Device Datasheet for Arria V Devices
Electrical Characteristics
Hot Socketing
Table 2–12 lists the hot socketing specifications for Arria V devices.
Table 2–12. Hot Socketing Specifications for Arria V Devices—Preliminary
Symbol
IIOPIN (DC)
IIOPIN (AC)
Description
DC current per I/O pin
Maximum
300 A
(1)
AC current per I/O pin
8 mA
DC current per transceiver transmitter (TX)
pin
IXCVR-TX (DC)
100 mA
50 mA
IXCVR-RX (DC)
DC current per transceiver receiver (RX) pin
Note to Table 2–12:
(1) The I/O ramp rate is 10 ns or more. For ramp rates faster than 10 ns, |IIOPIN| = C dv/dt, in which C is the I/O pin
capacitance and dv/dt is the slew rate.
Internal Weak Pull-Up Resistor
Table 2–13 lists the weak pull-up resistor values for Arria V devices.
(1), (2)
Table 2–13. Internal Weak Pull-Up Resistor Values for Arria V Devices—Preliminary
Symbol
Description
Conditions (V) (3)
Value (4) Unit
VCCIO = 3.3 5%
25
25
25
25
25
25
25
25
k
k
k
k
k
k
k
k
VCCIO = 3.0 5%
VCCIO = 2.5 5%
VCCIO = 1.8 5%
VCCIO = 1.5 5%
Value of the I/O pin pull-up resistor before and during
configuration, as well as user mode if you have enabled the
programmable pull-up resistor option.
RPU
V
V
CCIO = 1.35 5%
CCIO = 1.25 5%
VCCIO = 1.2 5%
Notes to Table 2–13:
(1) All I/O pins have an option to enable weak pull-up except the configuration, test, and JTAG pins.
(2) The internal weak pull-down feature is only available for the JTAG TCKpin. The typical value for this internal weak pull-down resistor is
approximately 25 k
(3) Pin pull-up resistance values may be lower if an external source drives the pin higher than VCCIO
.
(4) Valid with 10% tolerances to cover changes over PVT.
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–11
Electrical Characteristics
I/O Standard Specifications
Table 2–14 through Table 2–19 list the input voltage (VIH and VIL), output voltage
(VOH and VOL), and current drive characteristics (IOH and IOL) for various I/O
standards supported by Arria V devices. The I/O standards tables also list the Arria V
device family I/O standard specifications. The VOL and VOH values are valid at the
corresponding IOH and IOL, respectively.
For an explanation of terms used in Table 2–14 through Table 2–19, refer to “Glossary”
on page 2–48.
Table 2–14. Single-Ended I/O Standards for Arria V Devices—Preliminary
VCCIO (V)
VIL (V)
VIH (V)
VOL (V)
VOH (V)
IOL
IOH
I/O Standard
(mA) (mA)
Min
Typ
Max
Min
Max
Min
Max
Max
Min
3.3-V LVTTL
3.135
3.3
3.465 –0.3
0.8
1.7
3.6
0.45
2.4
4
2
–4
–2
3.3-V
LVCMOS
3.135
2.85
2.85
3.3
3
3.465 –0.3
0.8
0.8
0.8
1.7
1.7
1.7
3.6
3.6
3.6
0.2
0.4
0.2
VCCIO – 0.2
2.4
3.0-V LVTTL
3.15
3.15
–0.3
–0.3
2
–2
3.0-V
LVCMOS
3
V
CCIO – 0.2
0.1
–0.1
VCCIO
0.3
+
3.0-V PCI
2.85
3
3.15
3.15
—
—
0.3 x VCCIO
0.5 x VCCIO
0.1 x VCCIO
0.9 x VCCIO
1.5
–0.5
VCCIO
0.3
+
3.0-V PCI-X
2.5 V
2.85
2.375
1.71
3
0.35 x VCCIO 0.5 x VCCIO
0.1 x VCCIO
0.4
0.9 x VCCIO
2
1.5
1
–0.5
–1
2.5
1.8
2.625 –0.3
1.89 –0.3 0.35 x VCCIO
1.575 –0.3 0.35 x VCCIO
1.26 –0.3 0.35 x VCCIO
0.7
1.7
3.6
0.65 x
VCCIO
VCCIO
0.3
+
+
+
1.8 V
0.45
VCCIO – 0.45
2
–2
0.65 x
VCCIO
VCCIO
0.3
1.5 V
1.2 V
1.425
1.14
1.5
1.2
0.25 x VCCIO 0.75 x VCCIO
0.25 x VCCIO 0.75 x VCCIO
2
2
–2
–2
0.65 x
VCCIO
VCCIO
0.3
Table 2–15. Single-Ended SSTL and HSTL I/O Reference Voltage Specifications for Arria V Devices—Preliminary (Part 1
of 2)
VCCIO(V)
Typ
VREF(V)
Typ
VTT(V)
Typ
I/O Standard
Min
Max
Min
Max
Min
Max
SSTL-2
Class I, II
2.375
2.5
1.8
2.625
0.49 x VCCIO 0.5 x VCCIO 0.51 x VCCIO
0.833 0.9 0.969
VREF – 0.04
VREF
VREF
VREF + 0.04
VREF + 0.04
SSTL-18
Class I, II
1.71
1.425
1.283
1.19
1.89
1.575
1.418
1.26
VREF – 0.04
SSTL-15
Class I, II
1.5
0.49 x VCCIO 0.5 x VCCIO 0.51 x VCCIO 0.49 x VCCIO
0.49 x VCCIO 0.5 x VCCIO 0.51 x VCCIO 0.49 x VCCIO
0.49 x VCCIO 0.5 x VCCIO 0.51 x VCCIO 0.49 x VCCIO
0.5 x VCCIO 0.51 x VCCIO
0.5 x VCCIO 0.51 x VCCIO
0.5 x VCCIO 0.51 x VCCIO
SSTL 135
Class I, II
1.35
1.25
SSTL 125
Class I, II
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–12
Chapter 2: Device Datasheet for Arria V Devices
Electrical Characteristics
Table 2–15. Single-Ended SSTL and HSTL I/O Reference Voltage Specifications for Arria V Devices—Preliminary (Part 2
of 2)
V
CCIO(V)
Typ
VREF(V)
Typ
VTT(V)
Typ
I/O Standard
Min
Max
Min
Max
Min
Max
HSTL-18
Class I, II
1.71
1.8
1.5
1.89
0.85
0.9
0.95
—
VCCIO/2
VCCIO/2
—
HSTL-15
Class I, II
1.425
1.575
0.68
0.75
0.9
—
—
HSTL-12
Class I, II
1.14
1.14
1.2
1.2
1.26
1.3
0.47 x VCCIO 0.5 x VCCIO 0.53 x VCCIO
0.49 x VCCIO 0.5 x VCCIO 0.51 x VCCIO
—
—
VCCIO/2
—
—
—
HSUL-12
Table 2–16. Single-Ended SSTL and HSTL I/O Standards Signal Specifications for Arria V Devices—Preliminary (Part 1
of 2)
VIL(DC) (V)
VIH(DC) (V)
Min Max
VREF
VIL(AC) (V) VIH(AC) (V)
Max Min
VOL (V)
Max
VOH (V)
Min
I/O Standard
Iol (mA) Ioh (mA)
Min
Max
SSTL-2
Class I
VREF
–0.15
+
VCCIO
0.3
+
+
+
+
VREF
0.31
–
–0.3
VREF + 0.31 VTT – 0.608 VTT + 0.608
VREF + 0.31 VTT – 0.81 VTT + 0.81
VREF + 0.25 VTT – 0.603 VTT + 0.603
8.1
16.2
6.7
13.4
8
–8.1
–16.2
–6.7
–13.4
–8
0.15
SSTL-2
Class II
VREF
–0.15
VREF
0.15
+
VCCIO
0.3
VREF
0.31
–
–0.3
–0.3
–0.3
—
SSTL-18
Class I
VREF
–0.125
VREF
0.125
+
VCCIO
0.3
VREF
0.25
–
SSTL-18
Class II
VREF
–0.125
VREF
0.125
+
VCCIO
0.3
VREF
0.25
–
VREF + 0.25
0.28
0.2 x VCCIO
0.2 x VCCIO
TBD (1)
TBD (1)
0.4
VCCIO –0.28
0.8 x VCCIO
0.8 x VCCIO
TBD (1)
SSTL-15
Class I
VREF
0.1
–
–
–
VREF
0.1
+
+
+
VREF
0.175
–
VREF
0.175
+
—
—
—
—
—
—
—
—
SSTL-15
Class II
VREF
0.1
VREF
0.1
VREF
0.175
–
VREF +
0.175
—
16
–16
VREF
0.09
VREF
0.09
VREF
0.16
–
SSTL 135
SSTL 125
—
VREF + 0.16
TBD (1)
TBD (1)
8
TBD (1)
TBD (1)
–8
VREF
0.85
–
VREF
0.85
+
VREF
0.15
–
—
VREF + 0.15
VREF + 0.2
VREF + 0.2
VREF + 0.2
VREF + 0.2
TBD (1)
HSTL-18
Class I
VREF
–0.1
VREF
0.1
+
VREF
0.2
–
—
VCCIO – 0.4
VCCIO – 0.4
VCCIO – 0.4
VCCIO –0.4
HSTL-18
Class II
VREF
0.1
–
VREF
0.1
+
+
+
+
VREF
0.2
–
–
–
–
—
0.4
16
–16
HSTL-15
Class I
VREF
0.1
–
–
–
VREF
0.1
VREF
0.2
—
0.4
8
–8
HSTL-15
Class II
VREF
0.1
VREF
0.1
VREF
0.2
—
0.4
16
–16
HSTL-12
Class I
VREF
VREF
VCCIO
+
+
VREF
–0.15
–0.15
VREF + 0.15 0.25 x VCCIO 0.75 x VCCIO
VREF + 0.15 0.25 x VCCIO 0.75 x VCCIO
8
–8
0.08
VREF
0.08
0.08
VREF
0.08
0.15
0.15
HSTL-12
Class II
–
+
VCCIO
0.15
VREF
–
16
–16
0.15
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 2: Device Datasheet for Arria V Devices
2–13
Electrical Characteristics
Table 2–16. Single-Ended SSTL and HSTL I/O Standards Signal Specifications for Arria V Devices—Preliminary (Part 2
of 2)
VIL(DC) (V)
Min Max
VREF
VIH(DC) (V)
Min Max
VREF
VIL(AC) (V) VIH(AC) (V)
Max Min
VOL (V)
Max
VOH (V)
Min
I/O Standard
Iol (mA) Ioh (mA)
–
+
VREF
–
(1)
(1)
HSUL-12
—
—
VREF + 0.22 0.1 x VCCIO
0.9 x VCCIO TBD
TBD
0.13
0.13
0.22
Note to Table 2–16:
(1) Pending silicon characterization.
Table 2–17. Differential SSTL I/O Standards for Arria V Devices—Preliminary
VCCIO (V)
Typ
VSWING(DC) (V)
Min Max
VX(AC) (V)
Typ
VSWING(AC) (V)
VOX(AC) (V)
Typ
I/O
Standard
Min
Max
Min
Max
Min
Max
VCCIO VCCIO/2 –
+ 0.6 0.15
VCCIO VCCIO/2 –
Min
Max
SSTL-2
Class I, II
VCCIO
0.6
+
VCCIO/2
– 0.2
V
CCIO/2
V
CCIO/2+
0.15
2.375 2.5 2.625 0.3
1.71 1.8 1.89 0.25
1.425 1.5 1.575 0.2
—
—
0.62
—
—
+ 0.2
SSTL-18
Class I, II
VCCIO
0.6
+
VCCIO/2
– 0.175
VCCIO/2
+ 0.175
VCCIO/2+
0.125
0.5
+ 0.6
0.125
SSTL-15
Class I, II
–0.2
–0.2
—
–0.15
—
0.15
–0.35 0.35
—
VCCIO/2
—
—
VREF
– 0.135
VREF
+
TBD
TBD
VREF
–0.15
VREF
+ 0.15
SSTL 135
SSTL 125
1.283 1.35 1.45
1.19 1.25 1.31
0.2
VCCIO/2
VCCIO/2
(1)
(1)
0.135
TBD
TBD
TBD
TBD
(1)
(1)
(1)
TBD
—
TBD
TBD
(1)
(1)
(1)
(1)
Note to Table 2–17:
(1) Pending silicon characterization.
Table 2–18. Differential HSTL I/O Standards for Arria V Devices—Preliminary
VCCIO (V)
Typ
VDIF(DC) (V)
VX(AC) (V)
Typ
VCM(DC) (V)
Typ
VDIF(AC) (V)
Min Max
I/O
Standard
Min
Max
Min
Max
Min
Max
Min
Max
HSTL-18
Class I, II
1.71
1.8
1.5
1.2
1.89
0.2
0.2
—
0.78
—
—
1.12
0.78
—
—
1.12
0.4
—
HSTL-15
Class I, II
1.425
1.14
1.575
1.26
—
0.68
—
0.9
—
0.68
0.9
0.4
0.3
—
HSTL-12
Class I, II
VCCIO
+ 0.3
0.5 x
VCCIO
0.4 x V 0.5 x V 0.6 x
VCCIO
VCCIO
+ 0.48
0.16
CCIO
CCIO
0.5 x
VCCIO
+0.12
0.5 x VCCIO 0.5 x
– 0.12 VCCIO
0.4 x V 0.5 x V 0.6 x
VCCIO
HSUL-12
1.14
1.2
1.3
0.26 0.26
0.44
0.44
CCIO
CCIO
(1)
Table 2–19. Differential I/O Standard Specifications for Arria V Devices—Preliminary
(Part 1 of 2)
(2)
(2)
V
CCIO (V)
VID (mV)
VICM(DC) (V)
VOD (V)
VOCM (V)
Typ
I/O Standard
Min Typ Max Min Condition Max Min Max
Min Typ Max Min
Max
(3)
PCML
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–14
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
(1)
Table 2–19. Differential I/O Standard Specifications for Arria V Devices—Preliminary
(Part 2 of 2)
(2)
(2)
VCCIO (V)
VID (mV)
VICM(DC) (V)
VOD (V)
VOCM (V)
Typ
I/O Standard
Min Typ Max Min Condition Max Min Max
Min Typ Max Min
Max
—
—
0.05
1.8 0.247
—
—
0.6 1.125 1.25 1.375
0.6 1.125 1.25 1.375
VCM
1.25 V
=
2.5 V LVDS 2.375 2.5 2.625 100
RSDS (HIO) 2.375 2.5 2.625 100
1.05 1.55 0.247
VCM
1.25 V
=
—
0.3
1.4
0.1
0.2 0.6
0.5
1.2
1.4
Mini-LVDS
2.375 2.5 2.625 200
(HIO)
—
600 0.4 1.325 0.25
0.6 1.8
—
—
0.6
—
1
1.2
—
1.4
—
LVPECL
2.375 2.5 2.625 300
—
—
—
—
Notes to Table 2–19:
(1) The 1.4-V and 1.5-V PCML transceiver I/O standard specifications are described in “Transceiver Performance Specifications” on page 2–15.
(2) RL range: 90 RL 110 .
(3) Transmitter, receiver, and input reference clock pins of high-speed transceivers use the PCML I/O standard. For transmitter, receiver, and
reference clock I/O pin specifications, refer to Table 2–20 and Table 2–21.
Power Consumption
Altera offers two ways to estimate power consumption for a design—the Excel-based
Early Power Estimator (EPE) and the Quartus® II PowerPlay Power Analyzer feature.
1
You typically use the interactive Excel-based EPE before designing the FPGA to get a
magnitude estimate of the device power. The Quartus II PowerPlay Power Analyzer
provides better quality estimates based on the specifics of the design after you
complete place-and-route. The PowerPlay Power Analyzer can apply a combination
of user-entered, simulation-derived, and estimated signal activities that, when
combined with detailed circuit models, yields very accurate power estimates.
f
For more information about power estimation tools, refer to the PowerPlay Early Power
Estimator User Guide and the PowerPlay Power Analysis chapter in the Quartus II
Handbook.
Switching Characteristics
This section provides performance characteristics of Arria V core and periphery
blocks for commercial grade devices.
These characteristics can be designated as Preliminary or Final.
■
■
Preliminary characteristics are created using simulation results, process data, and
other known parameters. The title of these tables show the designation as
“Preliminary.”
Final numbers are based on actual silicon characterization and testing. The
numbers reflect the actual performance of the device under worst-case silicon
process, voltage, and junction temperature conditions. There are no preliminary
designations on finalized tables.
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 2: Device Datasheet for Arria V Devices
2–15
Switching Characteristics
Transceiver Performance Specifications
This section describes transceiver performance specifications.
Table 2–20 and Table 2–21 list the Arria V transceiver specifications.
(1)
Table 2–20. Transceiver Specifications for Arria V GX Devices—Preliminary
(Part 1 of 3)
–4
–5
–6
Commercial
Speed Grade
Commercial/Industrial
Speed Grade
Commercial Speed
Grade
Symbol/
Description
Conditions
Unit
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Reference Clock
Supported I/O
Standards
1.2 V PCML, 1.4 V PCML, 1.5 V PCML, 2.5 V PCML, Differential LVPECL (2), HCSL, and LVDS
Input frequency from
REFCLKinput pins
—
—
—
27
45
—
—
—
710
55
27
45
—
—
—
710
55
27
45
—
—
—
710
55
MHz
%
Duty cycle
Peak-to-peak
differential input voltage
200
2000
200
2000
200
2000
mV
Spread-spectrum
modulating clock
frequency
PCI Express®
(PCIe®)
30
—
33
30
—
33
30
—
33
kHz
—
0 to
0 to
0 to
Spread-spectrum
downspread
PCIe
—
—
—
—
—
—
—
—
—
—
—
—
–0.5%
–0.5%
–0.5%
On-chip termination
resistors
—
—
100
100
100
(3)
(3)
VICM (AC coupled)
1.1
1.1 (3)
1.1
V
HCSL I/O
standard for the
PCIe reference
clock
VICM (DC coupled)
250
—
—
550
—
250
—
—
550
—
250
—
—
550
—
mV
2000
1%
2000
1%
2000
1%
RREF
—
Transceiver Clocks
fixedclkclock
frequency
Avalon®-Memory-
Mapped (Avalon-MM)
PHY management clock
frequency
PCIe
Receiver Detect
—
125
—
—
125
—
—
125
—
MHz
MHz
< 150
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–16
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
(1)
Table 2–20. Transceiver Specifications for Arria V GX Devices—Preliminary
(Part 2 of 3)
–4
–5
–6
Commercial
Speed Grade
Commercial/Industrial
Speed Grade
Commercial Speed
Grade
Symbol/
Description
Conditions
Unit
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Receiver
Supported I/O
Standards
1.5 V PCML, 2.5 V PCML, LVPECL, and LVDS
Data rate
—
—
611
—
—
—
6553
1.2
611
—
—
—
6553
1.2
611
—
—
—
3125
1.2
Mbps
V
Absolute VMAX for a
receiver pin
(4)
Absolute VMIN for a
receiver pin
—
—
–0.4
—
—
—
—
–0.4
—
—
—
—
–0.4
—
—
—
—
V
V
Maximum peak-to-peak
differential input voltage
VID (diff p-p) before
1.6
1.6
1.6
device configuration
Maximum peak-to-peak
differential input voltage
VID (diff p-p) after
—
—
—
85
—
—
2.2
—
—
85
—
—
2.2
—
—
85
—
—
2.2
—
V
device configuration
Minimum differential
eye opening at the
receiver serial input
mV
(5)
pins
85- setting
100- setting
120- setting
150- setting
—
—
—
—
85
—
—
—
—
—
—
—
—
85
—
—
—
—
—
—
—
—
85
—
—
—
—
100
120
150
100
120
150
100
120
150
Differential on-chip
termination resistors
PCIe (Gen1 and
Gen2), GIGE,
XAUI, SDI,
Differential and
common mode return
loss
Compliant
—
CPRI, OBSAI
Programmable ppm
detector
—
—
—
62.5, 100, 125, 200, 250, 300, 500, and 1000
ppm
UI
(6)
Run Length
—
—
—
—
200
4
—
—
—
—
200
4
—
—
—
—
200
4
Programmable
equalization
dB
DC Gain Setting
= 0
—
—
0
3
—
—
—
—
0
3
—
—
—
—
0
3
—
—
dB
dB
Programmable DC gain
DC Gain Setting
= 1
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 2: Device Datasheet for Arria V Devices
2–17
Switching Characteristics
(1)
Table 2–20. Transceiver Specifications for Arria V GX Devices—Preliminary
(Part 3 of 3)
–5
–4
–6
Commercial
Speed Grade
Commercial/Industrial
Speed Grade
Commercial Speed
Grade
Symbol/
Description
Conditions
Unit
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Transmitter
Supported I/O
Standards
1.5 V PCML
Data rate
VOCM
—
611
—
6553
611
—
6553
611
—
3125
Mbps
mV
—
—
—
—
—
—
30
30
650
85
—
—
—
—
—
—
—
30
30
650
85
—
—
—
—
—
—
—
30
30
650
85
—
—
85- setting
100- setting
120- setting
150- setting
—
100
120
150
—
—
100
120
150
—
—
100
120
150
—
—
Differential on-chip
termination resistors
—
—
—
—
—
—
(7)
Rise time
160
160
160
160
160
160
ps
(7)
Fall time
—
—
—
—
ps
CMU PLL
Supported data range
—
611
—
6553
611
—
6553
611
—
3125
Mbps
Transceiver-FPGA Fabric Interface
Interface speed
—
25
25
—
—
187.50
163.84
25
25
—
—
163.84
163.84
25
25
—
—
156.25
156.25
MHz
MHz
(single-width mode)
Interface speed
—
(double-width mode)
Notes to Table 2–20:
(1) Speed grades shown in Table 2–20 refer to the Transceiver Speed Grade in the device ordering code. For more information about device ordering codes, refer
to the Overview for Arria V Device Family chapter.
(2) Differential LVPECL signal levels must comply to the minimum and maximum peak-to-peak differential input voltage specified in this table.
(3) The reference clock common mode voltage is equal to the VCCR_GXB power supply level.
(4) The device cannot tolerate prolonged operation at this absolute maximum.
(5) The differential eye opening specification at the receiver input pins assumes that you have disabled the Receiver Equalization feature. If you enable the
Receiver Equalization feature, the receiver circuitry can tolerate a lower minimum eye opening, depending on the equalization level.
(6) The rate match FIFO supports only up to 300 parts per million (ppm).
(7) The Quartus II software automatically selects the appropriate slew rate depending on the configured data rate or functional mode.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–18
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
(1)
Table 2–21. Transceiver Specifications for Arria V GT Devices—Preliminary
(Part 1 of 2)
–5
Industrial
Speed Grade
Symbol/
Conditions
Description
Unit
Min
Typ
Max
Reference Clock
1.2 V PCML, 1.4 V PCML, 1.5 V PCML, 2.5 V PCML, Differential LVPECL (2)
HCSL, and LVDS
,
Supported I/O Standards
Input frequency from REFCLKinput pins
Duty cycle
—
—
—
27
45
—
—
—
710
55
MHz
%
Peak-to-peak differential input voltage
200
2000
mV
Spread-spectrum modulating clock
frequency
PCI Express® (PCIe®)
30
—
33
kHz
—
0 to
–0.5%
100
Spread-spectrum downspread
On-chip termination resistors
PCIe
—
—
—
—
—
—
(3)
VICM (AC coupled)
1.1
V
HCSL I/O standard for
the PCIe reference clock
V
ICM (DC coupled)
250
—
—
550
—
mV
RREF
—
2000 1%
Transceiver Clocks
PCIe
Receiver Detect
fixedclkclock frequency
—
125
—
MHz
MHz
Avalon-MM PHY management clock
frequency
< 150
Receiver
Supported I/O Standards
Data rate (6-Gbps Transceiver)
Data rate (10-Gbps transceiver)
1.5 V PCML, 2.5 V PCML, LVPECL, and LVDS
—
—
—
—
611
6.376
—
—
9.8304
—
6375
10.3125
1.2
Mbps
Gbps
V
(4)
Absolute VMAX for a receiver pin
Absolute VMIN for a receiver pin
–0.4
—
—
V
Maximum peak-to-peak differential input
voltage VID (diff p-p) before device
configuration
—
—
—
1.6
V
Maximum peak-to-peak differential input
voltage VID (diff p-p) after device
configuration
—
—
—
85
—
—
2.2
—
V
Minimum differential eye opening at the
mV
(5)
receiver serial input pins
85- setting
100- setting
120- setting
150- setting
85
100
120
150
Differential on-chip termination resistors
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–19
Switching Characteristics
(1)
Table 2–21. Transceiver Specifications for Arria V GT Devices—Preliminary
(Part 2 of 2)
–5
Industrial
Speed Grade
Symbol/
Conditions
Description
Unit
Min
Typ
Max
PCIe (Gen1 and Gen2),
GIGE, XAUI, SDI, CPRI,
OBSAI, SFI
Differential and common mode return loss
Compliant
—
62.5, 100, 125, 200, 250, 300, 500,
and 1000
(6)
Programmable ppm detector
—
ppm
Run Length
—
—
—
—
—
—
—
0
200
4
UI
dB
dB
dB
Programmable equalization
—
DC Gain Setting = 0
DC Gain Setting = 1
—
—
Programmable DC gain
3
Transmitter
Supported I/O Standards
Data rate (6-Gbps transceiver)
Data rate (10-Gbps transceiver)
VOCM
1.5 V PCML
—
—
611
6.376
—
—
9.8304
650
85
6375
10.3125
—
Mbps
Gbps
mV
—
85- setting
100- setting
120- setting
150- setting
—
—
—
—
100
120
150
—
—
Differential on-chip termination resistors
—
—
—
—
(7)
Rise time
30
160
160
ps
(7)
Fall time
—
30
—
ps
CMU PLL
Supported data range
—
0.611
—
10.3125
Gbps
Transceiver-FPGA Fabric Interface
Interface speed (80-bit mode)
—
—
—
25
25
25
—
—
—
159.375
156.25
MHz
MHz
MHz
Interface speed
(single-width mode)
Interface speed (double-width mode)
159.375
Notes to Table 2–21:
(1) Speed grades shown in Table 2–21 refer to the Transceiver Speed Grade in the device ordering code. For more information about device
ordering codes, refer to the Overview for Arria V Device Family chapter.
(2) Differential LVPECL signal levels must comply to the minimum and maximum peak-to-peak differential input voltage specified in this table.
(3) The reference clock common mode voltage is equal to the VCCR_GXB power supply level.
(4) The device cannot tolerate prolonged operation at this absolute maximum.
(5) The differential eye opening specification at the receiver input pins assumes that you have disabled the Receiver Equalization feature. If you
enable the Receiver Equalization feature, the receiver circuitry can tolerate a lower minimum eye opening, depending on the equalization level.
(6) The rate match FIFO supports only up to 300 ppm.
(7) The Quartus II software automatically selects the appropriate slew rate depending on the configured data rate or functional mode.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–20
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
Table 2–22 and Table 2–23 list the transceiver block jitter specification for Arria V
devices.
Table 2–22. Transceiver Block Jitter Specification for Arria V GX Devices—Preliminary (Part 1 of 4)
–5
–4
–6
Commercial/
Commercial Speed
Grade
Commercial Speed
Grade
Symbol/
Description
Industrial Speed
Grade
Conditions
Unit
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
(1)
CPRI Transmit Jitter Generation
E.6.HV, E.12.HV
—
—
—
—
—
—
—
—
0.279
0.35
0.14
0.17
—
—
—
—
—
—
—
—
0.279
0.35
0.14
0.17
—
—
—
—
—
—
—
—
0.279
0.35
0.14
0.17
UI
UI
UI
UI
Pattern = CJPAT
Total Jitter
E.6.LV, E.12.LV, E.24.LV,
E.30.LV
Pattern = CJTPAT
E.6.HV, E.12.HV
Pattern = CJPAT
Deterministic
Jitter
E.6.LV, E.12.LV, E.24.LV,
E.30.LV
Pattern = CJTPAT
(1)
CPRI Receiver Jitter Tolerance
E.6.HV, E.12.HV
Pattern = CJPAT
E.6.HV, E.12.HV
Pattern = CJPAT
Total jitter
tolerance
> 0.66
> 0.4
> 0.66
> 0.4
> 0.66
> 0.4
UI
UI
Deterministic
jitter tolerance
E.6.LV, E.12.LV, E.24.LV,
E.30.LV
Total jitter
tolerance
> 0.65
> 0.37
> 0.65
> 0.37
> 0.65
> 0.37
UI
UI
Pattern = CJTPAT
E.6.LV, E.12.LV, E.24.LV,
E.30.LV
Deterministic
jitter tolerance
Pattern = CJTPAT
Combined
E.6.LV, E.12.LV, E.24.LV,
E.30.LV
deterministic
and random
jitter tolerance
> 0.55
> 0.55
> 0.55
UI
Pattern = CJTPAT
(2)
OBSAI Transmit Jitter Generation
Total jitter at
768 Mbps,
REFCLK = 153.6 MHz
—
—
—
—
0.35
0.17
—
—
—
—
0.35
0.17
—
—
—
—
0.35
0.17
UI
UI
1536 Mbps,and
3072 Mbps
Pattern = CJPAT
Deterministic
jitter at
768 Mbps,
1536 Mbps,and
3072 Mbps
REFCLK = 153.6 MHz
Pattern = CJPAT
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
2–21
Unit
Table 2–22. Transceiver Block Jitter Specification for Arria V GX Devices—Preliminary (Part 2 of 4)
–5
–4
–6
Commercial/
Commercial Speed
Grade
Commercial Speed
Grade
Symbol/
Description
Industrial Speed
Grade
Conditions
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
(2)
OBSAI Receiver Jitter Tolerance
Deterministic
jitter tolerance
at 768 Mbps,
1536 Mbps, and
3072 Mbps
Pattern = CJPAT
Pattern = CJPAT
> 0.37
> 0.37
> 0.37
UI
UI
Combined
deterministic
and random
jitter tolerance
at 768 Mbps,
1536 Mbps,and
3072 Mbps
> 0.55
> 0.55
> 0.55
Jitter Frequency =
5.4 KHz
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
> 0.1
UI
UI
UI
UI
UI
UI
Sinusoidal Jitter
tolerance at
768 Mbps
Pattern = CJPAT
Jitter Frequency =
460 MHz to 20 MHz
Pattern = CJPAT
Jitter Frequency =
10.9 KHz
Sinusoidal Jitter
tolerance at
1536 Mbps
Pattern = CJPAT
Jitter Frequency =
921.6 MHz to 20 MHz
Pattern = CJPAT
Jitter Frequency =
21.8 KHz
Sinusoidal Jitter
tolerance at
3072 Mbps
Pattern = CJPAT
Jitter Frequency =
1843.2 MHz to 20 MHz
Pattern = CJPAT
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–22
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
Table 2–22. Transceiver Block Jitter Specification for Arria V GX Devices—Preliminary (Part 3 of 4)
–5
–4
–6
Commercial/
Commercial Speed
Grade
Commercial Speed
Grade
Symbol/
Description
Industrial Speed
Grade
Conditions
Unit
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
(3)
Serial RapidIO® (SRIO) Transmit Jitter Generation
Data Rate = 1.25, 2.5,
3.125 Gbps
Deterministic
jitter
(peak-to-peak)
—
—
—
—
0.17
0.35
—
—
—
—
0.17
0.35
—
—
—
—
0.17
0.35
UI
UI
Pattern = CJPAT
Data Rate = 1.25, 2.5,
3.125 Gbps
Total jitter
(peak-to-peak)
Pattern = CJPAT
(3)
SRIO Receiver Jitter Tolerance
Data Rate = 1.25, 2.5,
3.125 Gbps
Deterministic
jitter tolerance
(peak-to-peak)
> 0.37
> 0.55
> 0.37
> 0.55
> 0.37
> 0.55
UI
UI
Pattern = CJPAT
Combined
Data Rate = 1.25, 2.5,
3.125 Gbps
deterministic
and random
jitter tolerance
(peak-to-peak)
Pattern = CJPAT
Jitter Frequency =
22.1 KHz Data Rate =
1.25, 2.5, 3.125 Gbps
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
> 0.1
UI
UI
Pattern = CJPAT
Jitter Frequency =
1.875 MHz
Sinusoidal jitter
tolerance
Data Rate = 1.25, 2.5,
3.125 Gbps
(peak-to-peak)
Pattern = CJPAT
Jitter Frequency =
20 MHz
Data Rate = 1.25, 2.5,
3.125 Gbps
> 0.1
> 0.1
> 0.1
UI
Pattern = CJPAT
(4)
GIGE Transmit Jitter Generation
Deterministic
jitter
(peak-to-peak)
Pattern = CRPAT
Pattern = CRPAT
—
—
—
—
0.14
—
—
—
—
0.14
—
—
—
—
0.14
UI
UI
Total jitter
(peak-to-peak)
0.279
0.279
0.279
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
2–23
Unit
Table 2–22. Transceiver Block Jitter Specification for Arria V GX Devices—Preliminary (Part 4 of 4)
–5
–4
–6
Commercial/
Commercial Speed
Grade
Commercial Speed
Grade
Symbol/
Description
Industrial Speed
Grade
Conditions
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
(4)
GIGE Receiver Jitter Tolerance
Deterministic
jitter tolerance
(peak-to-peak)
Pattern = CJPAT
Pattern = CJPAT
> 0.4
> 0.4
> 0.4
UI
UI
Combined
deterministic
and random
jitter tolerance
(peak-to-peak)
> 0.66
> 0.66
> 0.66
(5)
HiGig Transmit Jitter Generation
Deterministic
jitter
(peak-to-peak)
Data Rate = 3.75 Gbps
Pattern = CJPAT
—
—
—
—
0.17
0.35
—
—
—
—
—
—
—
—
—
—
—
—
UI
UI
Data Rate = 3.75 Gbps
Pattern = CJPAT
Total jitter
(peak-to-peak)
Notes to Table 2–22:
(1) The jitter numbers for CPRI are compliant to the CPRI Specification V3.0.
(2) The jitter numbers for OBSAI are compliant to the OBSAI RP3 Specification V4.1.
(3) The jitter numbers for SRIO are compliant to the RapidIO Specification 1.3.
(4) The jitter numbers for GIGE are compliant to the IEEE802.3-2002 Specification.
(5) The jitter numbers for HiGig are compliant to the IEEE802.3ae-2002 Specification.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–24
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
Table 2–23. Transceiver Block Jitter Specification for Arria V GT Devices—Preliminary (Part 1 of 3)
–5
Symbol/
Description
Industrial Speed Grade
Conditions
Unit
Min
Typ
Max
SFI Transmit Jitter Generation (1)
Deterministic Jitter
Total Jitter
Data Rate = 9.8304, 10.3125 Gbps
—
—
—
—
0.1
UI
UI
Pattern = PRBS31
0.28
(1)
SFI Receive Jitter Tolerance
99% Jitter Tolerance
Total Jitter
Data Rate = 9.8304, 10.3125 Gbps
Pattern = PRBS31
>0.42
>0.70
UI
UI
CPRI Transmit Jitter Generation (2)
E.6.HV, E.12.HV
—
—
—
—
—
—
—
—
0.279
0.35
0.14
0.17
—
—
—
—
Pattern = CJPAT
Total Jitter
E.6.LV, E.12.LV, E.24.LV, E.30.LV
Pattern = CJTPAT
E.6.HV, E.12.HV
Pattern = CJPAT
Deterministic Jitter
E.6.LV, E.12.LV, E.24.LV, E.30.LV
Pattern = CJTPAT
CPRI Receive Jitter Generation (2)
E.6.HV, E.12.HV
Total jitter tolerance
> 0.66
> 0.4
> 0.66
> 0.4
Pattern = CJPAT
E.6.HV, E.12.HV
Deterministic jitter
tolerance
Pattern = CJPAT
E.6.LV, E.12.LV, E.24.LV, E.30.LV
Pattern = CJTPAT
Total jitter tolerance
> 0.65
> 0.37
> 0.55
> 0.65
> 0.37
> 0.55
E.6.LV, E.12.LV, E.24.LV, E.30.LV
Pattern = CJTPAT
Deterministic jitter
tolerance
E.6.LV, E.12.LV, E.24.LV, E.30.LV
Pattern = CJTPAT
Combined deterministic
and random jitter tolerance
(3)
OBSAI Transmit Jitter Generation
Total jitter at 768 Mbps,
1536 Mbps, and
3072 Mbps
REFCLK = 153.6MHz
—
—
—
—
0.35
0.17
—
—
Pattern = CJPAT
Deterministic jitter at
768 Mbps, 1536 Mbps,
and 3072 Mbps
REFCLK = 153.6MHz
Pattern = CJPAT
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–25
Switching Characteristics
Table 2–23. Transceiver Block Jitter Specification for Arria V GT Devices—Preliminary (Part 2 of 3)
–5
Symbol/
Description
Industrial Speed Grade
Conditions
Unit
Min
Typ
Max
(3)
OBSAI Receiver Jitter Tolerance
Deterministic jitter
tolerance at 768 Mbps,
1536 Mbps, and
3072 Mbps
Pattern = CJPAT
Pattern = CJPAT
> 0.37
> 0.55
> 0.37
> 0.55
Combined deterministic
and random jitter tolerance
at 768 Mbps, 1536 Mbps,
and 3072 Mbps
Jitter Frequency = 5.4 KHz
Pattern = CJPAT
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
> 8.5
> 0.1
> 8.5
> 0.1
> 8.5
Sinusoidal Jitter tolerance
at 768 Mbps
Jitter Frequency = 460 MHz to 20 MHz
Pattern = CJPAT
Jitter Frequency = 10.9 KHz
Pattern = CJPAT
Sinusoidal Jitter tolerance
at 1536 Mbps
Jitter Frequency = 921.6 MHz to 20 MHz
Pattern = CJPAT
Jitter Frequency = 21.8 KHz
Pattern = CJPAT
Sinusoidal Jitter tolerance
at 3072 Mbps
Jitter Frequency = 1843.2 MHz to
20 MHz
> 0.1
> 0.1
Pattern = CJPAT
(4)
SRIO Transmit Jitter Generation
Data Rate = 1.25, 2.5, 3.125 Gbps
Deterministic jitter
(peak-to-peak)
—
—
—
—
0.17
0.35
UI
UI
Pattern = CJPAT
Data Rate = 1.25, 2.5, 3.125 Gbps
Pattern = CJPAT
Total jitter (peak-to-peak)
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–26
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
Table 2–23. Transceiver Block Jitter Specification for Arria V GT Devices—Preliminary (Part 3 of 3)
–5
Symbol/
Description
Industrial Speed Grade
Conditions
Unit
Min
Typ
Max
(4)
SRIO Receiver Jitter Tolerance
Data Rate = 1.25, 2.5, 3.125 Gbps
Pattern = CJPAT
Deterministic jitter
tolerance (peak-to-peak)
> 0.37
> 0.55
UI
UI
Combined deterministic
and random jitter tolerance
(peak-to-peak)
Data Rate = 1.25, 2.5, 3.125 Gbps
Pattern = CJPAT
Jitter Frequency = 22.1 KHz Data Rate =
1.25, 2.5, 3.125 Gbps
> 8.5
> 0.1
UI
UI
Pattern = CJPAT
Jitter Frequency = 1.875 MHz
Data Rate = 1.25, 2.5, 3.125 Gbps
Pattern = CJPAT
Sinusoidal jitter tolerance
(peak-to-peak)
Jitter Frequency = 20 MHz
Data Rate = 1.25, 2.5, 3.125 Gbps
Pattern = CJPAT
> 0.1
UI
(5)
GIGE Transmit Jitter Generation
Deterministic jitter
(peak-to-peak)
Pattern = CRPAT
—
—
—
—
0.14
UI
UI
Total jitter (peak-to-peak)
Pattern = CRPAT
0.279
(5)
GIGE Receiver Jitter Tolerance
Deterministic jitter
tolerance (peak-to-peak)
Pattern = CJPAT
> 0.4
UI
UI
Combined deterministic
and random jitter tolerance Pattern = CJPAT
(peak-to-peak)
> 0.66
(6)
HiGig Transmit Jitter Generation
Data Rate = 3.75 Gbps
Deterministic jitter
(peak-to-peak)
—
—
—
—
0.17
0.35
UI
UI
Pattern = CJPAT
Data Rate = 3.75 Gbps
Pattern = CJPAT
Total jitter (peak-to-peak)
Notes to Table 2–23:
(1) The jitter numbers for SFI are compliant to SFF-8431 Specification.
(2) The jitter numbers for CPRI are compliant to the CPRI Specification V3.0.
(3) The jitter numbers for OBSAI are compliant to the OBSAI RP3 Specification V4.1.
(4) The jitter numbers for SRIO are compliant to the RapidIO Specification 1.3.
(5) The jitter numbers for GIGE are compliant to the IEEE802.3-2002 Specification.
(6) The jitter numbers for HiGig are compliant to the IEEE802.3ae-2002 Specification.
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–27
Switching Characteristics
Core Performance Specifications
This section describes the clock tree, phase-locked loop (PLL), digital signal
processing (DSP), memory blocks and temperature sensing diode specifications.
Clock Tree Specifications
Table 2–24 lists the clock tree specifications for Arria V devices.
Table 2–24. Clock Tree Performance for Arria V Devices—Preliminary
Performance
–C4 Speed Grade
Unit
Symbol
–C5, I5 Speed Grade
–C6 Speed Grade
Global clock and Regional clock
Peripheral clock
625
450
625
400
525
350
MHz
MHz
PLL Specifications
Table 2–25 lists the Arria V PLL specifications when operating in both the commercial
junction temperature range (0° to 85°C) and the industrial junction temperature range
(–40° to 100°C).
(1)
Table 2–25. PLL Specifications for Arria V Devices—Preliminary
(Part 1 of 3)
Min
Symbol
Parameter
Typ
—
—
—
—
—
—
—
—
—
Max
Unit
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
%
(2)
Input clock frequency (–4 speed grade)
Input clock frequency (–5 speed grade)
Input clock frequency (–6 speed grade)
Integer input clock frequency to the PFD
Fractional input clock frequency to the PFD
PLL VCO operating range (–4 speed grade)
PLL VCO operating range (–5 speed grade)
PLL VCO operating range (–6 speed grade)
Input clock or external feedback clock input duty cycle
5
5
670
622
500
(2)
(2)
fIN
5
fINPFD
5
325
fFINPFD
50
600
600
600
40
TBD (1)
1600
1400
1300
60
fVCO
tEINDUTY
Output frequency for internal global or regional clock
(–4 speed grade)
(3)
—
—
—
—
—
—
500
MHz
MHz
MHz
Output frequency for internal global or regional clock
(–5 speed grade)
(3)
fOUT
500
Output frequency for internal global or regional clock
(–6 speed grade)
(3)
400
(3)
Output frequency for external clock output (–4 speed grade)
Output frequency for external clock output (–5 speed grade)
Output frequency for external clock output (–6 speed grade)
Duty cycle for external clock output (when set to 50%)
External feedback clock compensation time
—
—
—
45
—
—
—
—
—
—
50
—
—
—
670
MHz
MHz
MHz
%
(3)
fOUT_EXT
622
(3)
500
tOUTDUTY
55
10
tFCOMP
ns
tCONFIGPHASE
tDYCONFIGCLK
Time required to reconfigure phase shift
TBD (1)
—
Dynamic Configuration Clock
100
MHz
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–28
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
(1)
Table 2–25. PLL Specifications for Arria V Devices—Preliminary
(Part 2 of 3)
Symbol
tLOCK
tDLOCK
Parameter
Min
Typ
Max
Unit
Time required to lock from end-of-device configuration or
—
—
1
ms
deassertion of areset
Time required to lock dynamically (after switchover or
reconfiguring any non-post-scale counters/delays)
—
—
1
ms
PLL closed-loop low bandwidth
—
—
—
—
10
—
—
—
—
0.3
1.5
4
—
—
MHz
MHz
fCLBW
PLL closed-loop medium bandwidth
(8)
PLL closed-loop high bandwidth
—
MHz
tPLL_PSERR
tARESET
Accuracy of PLL phase shift
—
—
—
—
—
—
50
ps
Minimum pulse width on the aresetsignal
Input clock cycle-to-cycle jitter (FREF ≥ 100 MHz)
Input clock cycle-to-cycle jitter (FREF < 100 MHz)
Period jitter for dedicated clock output (FOUT ≥ 100 MHz)
Period jitter for dedicated clock output (FOUT < 100 MHz)
—
ns
0.15
+750
UI (p-p)
ps (p-p)
ps (p-p)
mUI (p-p)
(4), (5)
tINCCJ
(1)
TBD
TBD
(6)
tOUTPJ_DC
(1)
(1)
Cycle-to-cycle jitter for dedicated clock output
(FOUT ≥ 100 MHz)
—
—
—
—
—
—
—
—
—
—
TBD
TBD
TBD
TBD
TBD
TBD
ps (p-p)
mUI (p-p)
ps (p-p)
(6)
tOUTCCJ_DC
Cycle-to-cycle jitter for dedicated clock output
(FOUT < 100 MHz)
(1)
(1)
(1)
(1)
(1)
Period Jitter for clock output on the regular I/O
(FOUT ≥ 100 MHz)
(6),
tOUTPJ_IO
(9)
Period Jitter for clock output on the regular I/O
(FOUT < 100 MHz)
mUI (p-p)
ps (p-p)
Cycle-to-cycle jitter for clock output on the regular I/O
(FOUT ≥ 100 MHz)
(6),
tOUTCCJ_IO
(9)
Cycle-to-cycle jitter for clock output on the regular I/O
(FOUT < 100 MHz)
—
—
—
—
—
—
mUI (p-p)
tOUTPJ_DC_F
Period jitter for dedicated clock output in fractional mode
TBD (1)
TBD (1)
—
—
Cycle-to-cycle jitter for dedicated clock output in fractional
mode
tOUTCCJ_DC_F
tOUTPJ_IO_F
tOUTCCJ_IO_F
Period Jitter for clock output on the regular I/O in fractional
mode
—
—
—
—
—
—
—
—
—
—
TBD (1)
TBD (1)
—
—
Cycle-to-cycle jitter for clock output on the regular I/O in
fractional mode
Period jitter for dedicated clock output in cascaded PLLs
(FOUT ≥100 MHz)
(1)
TBD
ps (p-p)
mUI (p-p)
%
tCASC_OUTPJ_DC
(6), (7)
Period jitter for dedicated clock output in cascaded PLLs
(FOUT < 100 MHz)
(1)
TBD
Frequency drift after PFDENA is disabled for a duration of
100 µs
tDRIFT
10
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–29
Switching Characteristics
(1)
Table 2–25. PLL Specifications for Arria V Devices—Preliminary
(Part 3 of 3)
Min
Symbol
dKBIT
kVALUE
fRES
Parameter
Bit number of Delta Sigma Modulator (DSM)
Numerator of Fraction
Typ
Max
—
TBD (1)
Unit
—
24
bits
—
TBD (1) 8388608
Resolution of VCO frequency (fINPFD =100 MHz)
—
5.96
—
Hz
Notes to Table 2–25:
(1) Pending silicon characterization.
(2) This specification is limited in the Quartus II software by the I/O maximum frequency. The maximum I/O frequency is different for each I/O
standard.
(3) This specification is limited by the lower of the two: I/O fMAX or FOUT of the PLL.
(4) A high input jitter directly affects the PLL output jitter. To have low PLL output clock jitter, you must provide a clean clock source < 120 ps.
(5) FREF is fIN/N when N = 1.
(6) Peak-to-peak jitter with a probability level of 10–12 (14 sigma, 99.99999999974404 % confidence level). The output jitter specification applies to
the intrinsic jitter of the PLL, when an input jitter of 30 ps is applied. The external memory interface clock output jitter specifications use a different
measurement method and are available in Table 2–33 on page 2–35.
(7) The cascaded PLL specification is only applicable with the following conditions:
a. Upstream PLL: 0.59 MHz Upstream PLL BW < 1 MHz
b. Downstream PLL: Downstream PLL BW > 2 MHz
(8) High bandwidth PLL settings are not supported in external feedback mode.
(9) External memory interface clock output jitter specifications use a different measurement method, which are available in Table 2–33 on page 2–35.
DSP Block Specifications
Table 2–26 lists the Arria V DSP block performance specifications.
Table 2–26. DSP Block Performance Specifications for Arria V Devices—Preliminary
Performance
–C4
Speed
Grade
–C5, I5
Speed
Grade
–C6
Speed
Grade
Mode
Unit
Modes using One DSP Block
Independent 9 x 9 Multiplication
370
370
370
310
370
370
370
370
310
310
310
250
310
310
310
310
220
220
220
200
220
220
220
220
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
Independent 18 x 19 Multiplication
Independent 18 x 18 Multiplication
Independent 27 x 27 Multiplication
Independent 18 x 25 Multiplication
Independent 20 x 24 Multiplication
Two 18 x 19 Multiplier Adder Mode
18 x 18 Multiplier Added Summed with 36-bit Input
Modes using Two DSP Blocks
Complex 18 x 19 multiplication
370
310
370
310
250
310
220
200
220
MHz
MHz
MHz
Two 27 x 27 Multiplier Adder
Four 18 x 19 Multiplier Adder
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–30
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
Memory Block Specifications
Table 2–27 lists the Arria V memory block specifications.
Table 2–27. Memory Block Performance Specifications for Arria V Devices—Preliminary (1), (2)
Resources Used
Performance
C5,I5
Memory
Mode
Unit
C4
C6
ALUTs
Memory
Speed Grade Speed Grade Speed Grade
Single port, all supported widths
0
0
1
1
500
450
400
MHz
MHz
Simple dual-port, all supported
widths
500
450
400
MLAB
Simple dual-port with read and
write at the same address
0
1
400
350
300
MHz
ROM, all supported width
—
0
—
1
500
400
450
350
400
285
MHz
MHz
Single-port, all supported widths
Simple dual-port, all supported
widths
0
0
0
1
1
1
400
315
400
350
275
350
285
240
285
MHz
MHz
MHz
Simple dual-port with the
read-during-write option set to
Old Data, all supported widths
M10K
Block
True dual port, all supported
widths
ROM, all supported widths
0
1
400
1,275
850
350
285
MHz
ps
Min Pulse Width (clock high time)
Min Pulse Width (clock low time)
—
—
—
—
1,360
1,060
1,445
1,175
ps
Notes to Table 2–27:
(1) To achieve the maximum memory block performance, use a memory block clock that comes through global clock routing from an on-chip PLL
set to 50% output duty cycle. Use the Quartus II software to report timing for this and other memory block clocking schemes.
(2) When you use the error detection cyclical redundancy check (CRC) feature, there is no degradation in fMAX
.
Temperature Sensing Diode Specifications
Table 2–28 lists the specifications for the Arria V internal temperature sensing diode.
Table 2–28. Internal Temperature Sensing Diode Specifications for Arria V Devices—Preliminary
Offset
Temperature
Range
Conversion
Time
Minimum Resolution with no
Missing Codes
Accuracy Calibrated Sampling Rate
Option
Resolution
Frequency:
1 MHz
–40 to 100°C
8°C
No
< 100 ms
8 bits
8 bits
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–31
Switching Characteristics
Periphery Performance
This section describes periphery performance and the high-speed I/O and external
memory interface.
I/O performance supports several system interfaces, such as the LVDS high-speed
I/O interface, external memory interface, and the PCI/PCI-X bus interface. GPIO
standards such as 3.3-, 2.5-, 1.8-, and 1.5-V LVTTL/LVCMOS are capable of a typical
167 MHz and 1.2 LVCMOS at 100 MHz interfacing frequency with a 10 pF load.
1
Actual achievable frequency depends on design- and system-specific factors. You
must perform HSPICE/IBIS simulations based on your specific design and system
setup to determine the maximum achievable frequency in your system.
High-Speed I/O Specification
Table 2–29 lists high-speed I/O timing for Arria V devices.
Table 2–29. High-Speed I/O Specifications for Arria V Devices—Preliminary (1), (2), (3) (Part 1 of 3)
–4 Speed Grade
Min Typ Max
–5 Speed Grade
Min Typ Max
–6 Speed Grade
Min Typ Max
Symbol
Conditions
Unit
fHSCLK_in(input
clock
frequency)
True
Differential
I/O Standards
(5)
(5)
(5)
Clock boost factor W = 1 to 40
5
5
—
—
625
625
TBD
5
5
—
—
625
625
TBD
5
5
—
—
TBD
TBD
TBD
MHz
fHSCLK_in(input
clock
frequency)
Single Ended
Clock boost factor W = 1 to 40
MHz
I/O Standards
(4)
fHSCLK_in(input
clock
frequency)
Single Ended
Clock boost factor W = 1 to 40
5
5
—
—
5
5
—
—
5
5
—
—
MHz
MHz
I/O Standards
(3)
fHSCLK_OUT
(output clock
frequency)
(6)
(6)
(6)
—
625
625
TBD
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–32
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
Table 2–29. High-Speed I/O Specifications for Arria V Devices—Preliminary (1), (2), (3) (Part 2 of 3)
–4 Speed Grade
–5 Speed Grade
–6 Speed Grade
Symbol
Conditions
Unit
Min Typ
Max
Min Typ
Max
Min Typ
Max
Transmitter
(7)
(7)
(7)
(7)
(7)
(7)
True
SERDES factor J = 3 to 10
—
—
1250
—
—
1250
—
—
1050
Mbps
Mbps
Differential
I/O Standards
- fHSDR (data
rate)
SERDES factor J = 1 to 2, Uses
DDR Registers
(7)
(7)
(7)
Emulated
Differential
I/O Standards
with Three
External
(7)
(7)
(7)
SERDES factor J = 4 to 10
—
TBD
—
TBD
—
TBD
Mbps
Output
Resistor
Networks -
fHSDR (data
(8)
rate)
Total Jitter for Data Rate,
600 Mbps - 1.25 Gbps
—
—
—
—
—
—
160
0.1
—
—
—
—
—
—
160
0.1
—
—
—
—
—
—
160
0.1
ps
UI
ps
tx Jitter - True
Differential
I/O Standards
Total Jitter for Data Rate,
< 600 Mbps
tx Jitter
-
Total Jitter for Data Rate,
600 Mbps – 1.25 Gbps
TBD
TBD
TBD
Emulated
Differential
I/O Standards
with Three
External
Total Jitter for Data Rate
< 600 Mbps
—
—
TBD
—
—
TBD
—
—
TBD
UI
Output
Resistor
Network
TX output clock duty cycle for both
True and Emulated Differential I/O
Standards
tDUTY
45
—
—
50
—
—
55
45
—
—
50
—
—
55
45
—
—
50
—
—
55
%
ps
ps
True Differential I/O Standards
200
250
200
250
200
300
Emulated Differential I/O
Standards with Three External
Output Resistor Networks
tRISE & tFALL
True Differential I/O Standards
—
—
—
—
150
300
—
—
—
—
150
300
—
—
—
—
150
300
ps
ps
TCCS
Emulated Differential I/O
Standards
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–33
Switching Characteristics
Table 2–29. High-Speed I/O Specifications for Arria V Devices—Preliminary (1), (2), (3) (Part 3 of 3)
–4 Speed Grade
Min Typ Max
–5 Speed Grade
Min Typ Max
–6 Speed Grade
Symbol
Conditions
Unit
Min Typ
Max
Receiver
True
Differential
I/O Standards
- fHSDRDPA
(data rate)
SERDES factor J = 3 to 10
SERDES factor J = 3 to 10
—
—
1250
—
—
1250
—
—
1050
Mbps
(7)
(7)
(9)
(7)
(7)
(7)
(9)
(7)
(7)
(7)
(9)
(7)
—
—
—
—
—
—
Mbps
Mbps
fHSDR (data
SERDES factor J = 1 to 2, Uses
DDR Registers
rate)
DPA Mode
DPA run
length
—
—
—
—
—
—
—
—
—
10000
300
—
—
—
—
—
—
10000
300
—
—
—
—
—
—
10000
300
UI
Soft CDR mode
Soft-CDR
ppm tolerance
ppm
ps
Non DPA Mode
Sampling
Window
300
300
300
Notes to Table 2–29:
(1) When J = 3 to 10, use the serializer/deserializer (SERDES) block.
(2) When J = 1 or 2, bypass the SERDES block.
(3) This applies to LVDS source synchronous mode only.
(4) This applies to DPA and soft-CDR modes only.
(5) Clock Boost Factor (W) is the ratio between the input data rate and the input clock rate.
(6) This is achieved by using the LVDS clock network.
(7) The minimum specification depends on the clock source (for example, the PLL and clock pin) and the clock routing resource (global, regional, or local) that
you use. The I/O differential buffer and input register do not have a minimum toggle rate.
(8) You must calculate the leftover timing margin in the receiver by performing link timing closure analysis. You must consider the board skew margin, transmitter
channel-to-channel skew, and receiver sampling margin to determine the leftover timing margin.
(9) You can estimate the achievable maximum data rate for non-DPA mode by performing link timing closure analysis. You must consider the board skew margin,
transmitter delay margin, and receiver sampling margin to determine the maximum data rate supported.
Figure 2–1 shows the DPA lock time specifications with the DPA PLL calibration
option enabled.
Figure 2–1. DPA Lock Time Specification with DPA PLL Calibration Enabled
rx_reset
DPA Lock Time
rx_dpa_locked
256 data
transitions
96 slow
clock cycles
256 data
transitions
96 slow
clock cycles
256 data
transitions
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–34
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
Table 2–30 lists the DPA lock time specifications for Arria V devices.
(1), (2), (3)
Table 2–30. DPA Lock Time Specifications for Arria V Devices—Preliminary
Number of Data
Number of
Transitions in One
Standard
Training Pattern
Repetitions per 256
Maximum
Repetition of the
Training Pattern
(4)
Data Transitions
SPI-4
00000000001111111111
00001111
2
2
4
8
8
128
128
64
640 data transitions
640 data transitions
640 data transitions
640 data transitions
640 data transitions
Parallel Rapid I/O
10010000
10101010
32
Miscellaneous
01010101
32
Notes to Table 2–30:
(1) The DPA lock time is for one channel.
(2) One data transition is defined as a 0-to-1 or 1-to-0 transition.
(3) The DPA lock time stated in this table applies to both commercial and industrial grades.
(4) This is the number of repetitions for the stated training pattern to achieve the 256 data transitions.
Figure 2–2 shows the LVDS soft-CDR/DPA sinusoidal jitter tolerance specification for
a data rate equal to 1.25 Gbps.
Figure 2–2. LVDS Soft-CDR/DPA Sinusoidal Jitter Tolerance Specification for a Data Rate Equal to 1.25 Gbps
LVDS Soft-CDR/DPA Sinusoidal Jitter Tolerance Specification
25
8.5
0.35
0.1
F3
F2
F1
F4
Jitter Frequency (Hz)
Table 2–31 lists the LVDS soft-CDR/DPA sinusoidal jitter tolerance specification for a
data rate equal to 1.25 Gbps.
Table 2–31. LVDS Soft-CDR/DPA Sinusoidal Jitter Mask Values for a Data Rate Equal to 1.25 Gbps—Preliminary
Jitter Frequency (Hz)
Sinusoidal Jitter (UI)
25.000
F1
F2
F3
F4
10,000
17,565
25.000
1,493,000
50,000,000
0.350
0.350
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 2: Device Datasheet for Arria V Devices
2–35
Switching Characteristics
Figure 2–3 shows the LVDS soft-CDR/DPA sinusoidal jitter tolerance specification for
a data rate less than 1.25 Gbps.
Figure 2–3. LVDS Soft-CDR/DPA Sinusoidal Jitter Tolerance Specification for a Data Rate Less than 1.25 Gbps
Sinusoidal Jitter Amplitude
20db/dec
0.1 UI
P-P
Frequency
20 MHz
baud/1667
DQS Logic Block and Memory Output Clock Jitter Specifications
Table 2–32 lists the DQS phase shift error for Arria V devices.
Table 2–32. DQS Phase Shift Error Specification for DLL-Delayed Clock (tDQS_PSERR) for Arria V
Devices—Preliminary (1), (2)
Number of DQS Delay
Buffer
–C4
Speed Grade
–C5, I5
Speed Grade
–C6
Speed Grade
Unit
2
57
58
74
ps
Notes to Table 2–32:
(1) The numbers are preliminary pending silicon characterization.
(2) This error specification is the absolute maximum and minimum error. For example, skew on two DQS delay buffers
in a –4 speed grade is 58 ps or 29 ps.
Table 2–33 lists the memory output clock jitter specifications for Arria V devices.
(1)
Table 2–33. Memory Output Clock Jitter Specification for Arria V Devices—Preliminary
(Part 1 of 2)
–6
–4
–5
Clock
Speed Grade
Speed Grade
Speed Grade
Parameter
Symbol
Unit
Network
Min
–50
Max
50
Min
–55
Max
55
Min
–55
Max
55
Clock period jitter
Regional
Regional
Regional
Global
tJIT(per)
tJIT(cc)
ps
ps
ps
ps
ps
Cycle-to-cycle period jitter
Duty cycle jitter
–100
–50
100
50
–110
–82.5
–82.5
–165
110
82.5
82.5
165
–110
–82.5
–82.5
–165
110
82.5
82.5
165
tJIT(duty)
tJIT(per)
tJIT(cc)
Clock period jitter
–75
75
Cycle-to-cycle period jitter
Global
–150
150
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–36
Chapter 2: Device Datasheet for Arria V Devices
Switching Characteristics
(1)
Table 2–33. Memory Output Clock Jitter Specification for Arria V Devices—Preliminary
(Part 2 of 2)
–6
–4
–5
Clock
Network
Speed Grade
Speed Grade
Speed Grade
Parameter
Symbol
Unit
Min
Max
Min
Max
Min
Max
Duty cycle jitter
Global
tJIT(duty)
–75
75
–90
90
–90
90
ps
Note to Table 2–33:
(1) The memory output clock jitter measurements are for 200 consecutive clock cycles, as specified in the JEDEC DDR2/DDR3 SDRAM standard.
OCT Calibration Block Specifications
Table 2–34 lists the OCT calibration block specifications for Arria V devices.
Table 2–34. OCT Calibration Block Specifications for Arria V Devices—Preliminary
Symbol
Description
Min
Typ
Max
Unit
OCTUSRCLK
Clock required by OCT calibration blocks
—
—
20
MHz
Number of OCTUSRCLK clock cycles required for
RS OCT /RT OCT calibration
TOCTCAL
—
—
1000
32
—
—
Cycles
Cycles
Number of OCTUSRCLK clock cycles required for OCT code
to shift out
TOCTSHIFT
Time required between the dyn_term_ctrland oesignal
transitions in a bidirectional I/O buffer to dynamically switch
between RS OCT and RT OCT
TRS_RT
—
2.5
—
ns
Figure 2–4 shows the TRS_RT for dyn_term_ctrland oesignals.
Figure 2–4. Timing Diagram for dyn_term_ctrl and oe Signals
Tristate
Tristate
RX
oe
RX
dyn_term_ctrl
TRS_RT
TRS_RT
Duty Cycle Distortion (DCD) Specifications
Table 2–35 lists the worst-case DCD for Arria V devices.
Table 2–35. Worst-Case DCD on Arria V I/O Pins—Preliminary
–C5,I5 Speed
–C6 Speed
Grade
–C4 Speed Grade
Grade
Symbol
Unit
Min
Max
Min
Max
Min
45
Max
Output Duty Cycle
45
55
45
55
55
%
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–37
Configuration Specification
Configuration Specification
This section provides configuration specifications and timing for Arria V devices.
These characteristics can be designated as Preliminary or Final.
■
■
Preliminary characteristics are created using simulation results, process data, and
other known parameters. The title of these tables show the designation as
“Preliminary.”
Final numbers are based on actual silicon characterization and testing. The
numbers reflect the actual performance of the device under worst-case silicon
process, voltage, and junction temperature conditions. There are no designations
on finalized tables.
POR Specifications
Table 2–36 lists the specifications for fast and standard POR for Arria V devices.
Table 2–36. Fast and Standard POR Delay Specification for Arria V Devices (1)
POR Delay
Fast (2)
Minimum (ms)
Maximum (ms)
4
12
Standard (3)
100
300
Notes to Table 2–36:
(1) Select the POR delay based on the MSEL setting as described in the “Configuration Schemes for Arria V Devices”
table in the Configuration, Design Security, and Remote System Upgrades in Arria V Devices chapter.
(2) When the PORSELsignal is high, the device is in fast POR delay.
(3) When the PORSELsignal is low, the device is in standard POR delay.
JTAG Configuration Timing
Table 2–37 lists the JTAG timing parameters and values for Arria V devices.
Table 2–37. JTAG Timing Parameters and Values for Arria V Devices—Preliminary
Symbol
Description
TCK clock period
Min
30
14
14
1
Max
—
Unit
ns
ns
ns
ns
ns
ns
ns
ns
ns
tJCP
tJCH
tJCL
TCK clock high time
—
TCK clock low time
—
tJPSU (TDI)
tJPSU (TMS)
tJPH
TDI JTAG port setup time
TMS JTAG port setup time
JTAG port hold time
—
3
—
5
—
(1)
tJPCO
JTAG port clock to output
JTAG port high impedance to valid output
JTAG port valid output to high impedance
—
—
—
11
14
14
(1)
(1)
tJPZX
tJPXZ
Note to Table 2–37:
(1) A 1-ns adder is required for each VCCIO voltage step down from 3.0 V. For example, tJPCO = 12 ns if VCCIO of the TDO
I/O bank = 2.5 V, or 13 ns if it equals 1.8 V.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–38
Chapter 2: Device Datasheet for Arria V Devices
Configuration Specification
FPP Configuration Timing
This section describes the fast passive parallel (FPP) configuration timing parameters
for Arria V devices.
DCLK-to-DATA[] Ratio (r) for FPP Configuration
FPP configuration requires a different DCLK-to-DATA[]ratio when you turn on
encryption or the compression feature.
Table 2–38 lists the DCLK-to-DATA[]ratio for each combination.
Table 2–38. DCLK-to-DATA[] Ratio for Arria V Devices (1)
Configuration Scheme
Encryption
Compression
DCLK-to-DATA[] ratio (r)
Off
On
Off
On
Off
On
Off
On
Off
Off
On
On
Off
Off
On
On
1
1
2
2
1
2
4
4
FPP (8-bit wide)
FPP (16-bit wide)
Note to Table 2–38:
(1) Depending on the DCLK-to-DATA[]ratio, the host must send a DCLKfrequency that is r times the DATA[]rate in
byte per second (Bps) or word per second (Wps). For example, in FPP x16 where the r is 2, the DCLKfrequency
must be 2 times the DATA[]rate in Wps.
FPP Configuration Timing when DCLK to DATA[] = 1
Figure 2–5 shows the timing waveform for a FPP configuration when using a MAX® II
device as an external host. This timing waveform shows timing when the DCLK-to-
DATA[]ratio is 1.
1
When you enable decompression or the design security feature, the DCLK-to-DATA[]
ratio varies for FPP x8 and FPP x16. For the respective DCLK-to-DATA[]ratio, refer to
Table 2–38.
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 2: Device Datasheet for Arria V Devices
2–39
Configuration Specification
(1)
Figure 2–5. DCLK-to-DATA[] FPP Configuration Timing Waveform When the Ratio is 1
tCF2ST1
tCFG
tCF2CK
nCONFIG
nSTATUS (2)
tSTATUS
(6)
tCF2ST0
tCLK
CONF_DONE (3)
t
CH tCL
tCF2CD
tST2CK
(4)
DCLK
tDH
Word 0 Word 1 Word 2 Word 3
Word n
DATA[15..0](5)
Word n-2 Word n-1
User Mode
User Mode
tDSU
High-Z
User I/O
(7)
INIT_DONE
tCD2UM
Notes to Figure 2–5:
(1) The beginning of this waveform shows the device in user mode. In user mode, nCONFIG
, nSTATUS, and CONF_DONEare at logic-high levels. When
nCONFIGis pulled low, a reconfiguration cycle begins.
(2) After power up, the Arria V device holds nSTATUSlow for the time of the POR delay.
(3) After power up, before and during configuration, CONF_DONEis low.
(4) Do not leave DCLKfloating after configuration. You can drive it high or low, whichever is more convenient.
(5) For FPP x16, use DATA[15..0]. For FPP x8, use DATA[7..0]. DATA[15..0]are available as a user I/O pin after configuration. The state of this
pin depends on the dual-purpose pin settings.
(6) To ensure a successful configuration, send the entire configuration data to the Arria V device. CONF_DONEis released high when the Arria V device
receives all the configuration data successfully. After CONF_DONEgoes high, send two additional falling edges on DCLKto begin initialization and
enter user mode.
(7) After the option bit to enable the INIT_DONEpin is configured into the device, the INIT_DONE goes low.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–40
Chapter 2: Device Datasheet for Arria V Devices
Configuration Specification
Table 2–39 lists the timing parameters for Arria V devices for FPP configuration when
the DCLK-to-DATA[]ratio is 1.
(1)
Table 2–39. DCLK-to-DATA[] FPP Timing Parameters for Arria V Devices When the Ratio is 1—Preliminary
Symbol
tCF2CD
tCF2ST0
tCFG
Parameter
nCONFIGlow to CONF_DONElow
nCONFIGlow to nSTATUSlow
Minimum
Maximum
600
Unit
ns
—
—
600
ns
nCONFIGlow pulse width
2
268
—
—
µs
µs
µs
µs
µs
(2)
nSTATUSlow pulse width
1506
tSTATUS
tCF2ST1
tCF2CK
tST2CK
tDSU
(3)
nCONFIGhigh to nSTATUShigh
nCONFIGhigh to first rising edge on DCLK
nSTATUShigh to first rising edge of DCLK
1506
1506
2
—
—
DATA[]setup time before rising edge on
DCLK
5.5
—
ns
DATA[]hold time after rising edge on DCLK
DCLKhigh time
0
—
—
ns
ns
tDH
0.45 x 1/fMAX
tCH
DCLKlow time
0.45 x 1/fMAX
—
ns
tCL
DCLKperiod
1/fMAX
—
ns
tCLK
fMAX
tR
DCLKfrequency (FPP x8/ x16)
Input rise time
—
125
40
MHz
ns
—
Input fall time
—
175
40
ns
tF
(4)
CONF_DONEhigh to user mode
437
—
µs
tCD2UM
tCD2CU
tCD2UMC
CONF_DONEhigh to CLKUSRenabled
4 × maximum DCLKperiod
—
t
CD2CU + (Tinit x CLKUSR
CONF_DONEhigh to user mode with CLKUSR
option on
—
—
—
period)
Number of clock cycles required for device
initialization
Tinit
17,408
Cycles
Notes to Table 2–39:
(1) Use these timing parameters when the DCLK-to-DATA[]ratio is 1. To find the DCLK-to-DATA[]ratio for your system, refer Table 2–38 on
page 2–38.
(2) You can obtain this value if you do not delay configuration by extending the nCONFIGor the nSTATUSlow pulse width.
(3) You can obtain this value if you do not delay configuration by externally holding the nSTATUSlow.
(4) The minimum and maximum numbers apply only if you chose the internal oscillator as the clock source for initializing the device.
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–41
Configuration Specification
FPP Configuration Timing when DCLK to DATA[] > 1
Figure 2–6 shows the timing waveform for a FPP configuration when using a MAX II
device or microprocessor as an external host. This waveform shows timing when the
DCLK-to-DATA[]ratio is more than 1.
(1), (2)
Figure 2–6. FPP Configuration Timing Waveform When the DCLK-to-DATA[] Ratio is >1
tCF2ST1
tCFG
tCF2CK
nCONFIG
nSTATUS (3)
tSTATUS
tCF2ST0
CONF_DONE (4)
t
CL
tCF2CD
(8)
tST2CK
t
CH
DCLK (6)
DATA[15..0] (8)
User I/O
(7)
(5)
1
2
1
1
2
r
1
2
r
r
t
CLK
n
Word 0
Word 1
Word (n-1) Word
User Mode
User Mode
Word 3
t
t
tDSU
DH
DH
High-Z
(9)
INIT_DONE
tCD2UM
Notes to Figure 2–6:
(1) To find the DCLK-to-DATA[]ratio for your system, refer Table 2–38 on page 2–38.
(2) The beginning of this waveform shows the device in user mode. In user mode, nCONFIG, nSTATUS, and CONF_DONEare at logic high levels.
When nCONFIGis pulled low, a reconfiguration cycle begins.
(3) After power up, the Arria V device holds nSTATUSlow for the time as specified by the POR delay.
(4) After power up, before and during configuration, CONF_DONEis low.
(5) Do not leave DCLKfloating after configuration. You can drive it high or low, whichever is more convenient.
(6) “r” denotes the DCLK-to-DATA[]ratio. For the DCLK-to-DATA[]ratio based on the decompression and the design security feature enable
settings, refer to Table 2–38 on page 2–38.
(7) If needed, pause DCLKby holding it low. When DCLKrestarts, the external host must provide data on the DATA[15..0]pins prior to sending
the first DCLKrising edge.
(8) To ensure a successful configuration, send the entire configuration data to the Arria V device. CONF_DONEis released high after the Arria V device
receives all the configuration data successfully. After CONF_DONEgoes high, send two additional falling edges on DCLKto begin initialization
and enter user mode.
(9) After the option bit to enable the INIT_DONEpin is configured into the device, the INIT_DONEgoes low.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–42
Chapter 2: Device Datasheet for Arria V Devices
Configuration Specification
Table 2–40 lists the timing parameters for Arria V devices when the
DCLK-to-DATA[]ratio is more than 1.
Table 2–40. DCLK-to-DATA[] FPP Timing Parameters for Arria V Devices When the Ratio is >1—Preliminary (1)
Symbol
tCF2CD
tCF2ST0
tCFG
Parameter
nCONFIGlow to CONF_DONElow
nCONFIGlow to nSTATUSlow
Minimum
Maximum
600
Unit
ns
—
—
600
ns
nCONFIGlow pulse width
2
268
—
—
µs
µs
µs
µs
µs
(2)
nSTATUSlow pulse width
1506
tSTATUS
tCF2ST1
tCF2CK
tST2CK
tDSU
(3)
nCONFIGhigh to nSTATUShigh
nCONFIGhigh to first rising edge on DCLK
nSTATUShigh to first rising edge of DCLK
1506
1506
2
—
—
DATA[]setup time before rising edge on
DCLK
5.5
—
ns
DATA[]hold time after rising edge on DCLK
DCLKhigh time
3 x 1/fDCLK
—
—
ns
ns
tDH
0.45 x 1/fMAX
tCH
DCLKlow time
0.45 x 1/fMAX
—
ns
tCL
DCLKperiod
1/fMAX
—
ns
tCLK
fMAX
tR
DCLKfrequency (FPP x8/ x16)
Input rise time
—
125
40
MHz
ns
—
Input fall time
—
175
40
ns
tF
(4)
CONF_DONEhigh to user mode
437
—
µs
tCD2UM
tCD2CU
tCD2UMC
CONF_DONEhigh to CLKUSRenabled
4 × maximum DCLKperiod
—
t
CD2CU + (Tinit x CLKUSR
CONF_DONEhigh to user mode with CLKUSR
option on
—
—
—
period)
Number of clock cycles required for device
initialization
Tinit
17,408
Cycles
Notes to Table 2–40:
(1) Use these timing parameters when you use decompression and the design security features.
(2) This value can be obtained if you do not delay configuration by extending the nCONFIGor nSTATUSlow pulse width.
(3) This value can be obtained if you do not delay configuration by externally holding nSTATUSlow.
(4) The minimum and maximum numbers apply only if you chose the internal oscillator as the clock source for initializing the device.
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–43
Configuration Specification
AS Configuration Timing
Figure 2–7 shows the timing waveform for the active serial (AS) x1 mode and AS x4
mode configuration timing.
Figure 2–7. AS Configuration Timing
t
(1)
POR
nCONFIG
nSTATUS
CONF_DONE
nCSO
DCLK
t
CO
t
DH
Read Address
AS_DATA0/ASDO
AS_DATA1 (2)
t
SU
bit 1
bit 0
bit N - 1
bit N
t
(3)
CD2UM
INIT_DONE (4)
User I/O
User Mode
Notes to Figure 2–7:
(1) The AS scheme supports standard and fast POR delay (tPOR). For tPOR delay information, refer to the “POR Delay Specification” section in the
Configuration, Design Security, and remote System Upgrades in Arria V Devices chapter.
(2) If you are using AS x4 mode, this signal represents the AS_DATA[3..0]and EPCQ sends in 4-bits of data for each DCLKcycle.
(3) The initialization clock can be from the internal oscillator or CLKUSRpin.
(4) After the option bit to enable the INIT_DONEpin is configured into the device, the INIT_DONEgoes low.
Table 2–41 lists the timing parameters for AS x1 and AS x4 configurations in Arria V
devices.
(1), (2)
Table 2–41. AS Timing Parameters for AS x1 and x4 Configurations in Arria V Devices—Preliminary
Symbol
tCO
Parameter
Minimum
Maximum
Unit
µs
DCLK falling edge to the AS_DATA0
/
ASDOoutput
—
4
—
tSU
Data setup time before the rising edge on DCLK
Data hold time after the rising edge on DCLK
CONF_DONEhigh to user mode
1.5
ns
tH
0
175
—
ns
tCD2UM
tCD2CU
tCD2UMC
437
—
µs
CONF_DONEhigh to CLKUSRenabled
4 x maximum DCLKperiod
—
t
CD2CU + (Tinit x CLKUSR
CONF_DONEhigh to user mode with CLKUSR
—
—
—
option on
period)
Number of clock cycles required for device
initialization
Tinit
17,408
Cycles
Notes to Table 2–41:
(1) The minimum and maximum numbers apply only if you choose the internal oscillator as the clock source for initializing the device.
(2) The tCF2CD, tCF2ST0, tCFG, tSTATUS, and tCF2ST1 timing parameters are identical to the timing parameters for PS mode listed in Table 2–43 on
page 2–45.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–44
Chapter 2: Device Datasheet for Arria V Devices
Configuration Specification
Table 2–42 lists the internal clock frequency specification for the AS configuration
scheme.
Table 2–42. DCLK Frequency Specification in the AS Configuration Scheme—Preliminary (1), (2)
Minimum
Typical
7.9
Maximum
12.5
Unit
MHz
MHz
MHz
MHz
5.3
10.6
21.3
15.7
31.4
62.9
25.0
50.0
42.6
100.0
Notes to Table 2–42:
(1) This applies to the DCLK frequency specification when using the internal oscillator as the configuration clock source.
(2) The AS multi-device configuration scheme does not support DCLKfrequency of 100 MHz.
PS Configuration Timing
Figure 2–8 shows the timing waveform for a passive serial (PS) configuration when
using a MAX II device or microprocessor as an external host.
(1)
Figure 2–8. PS Configuration Timing Waveform
tCF2ST1
tCFG
tCF2CK
nCONFIG
nSTATUS (2)
tSTATUS
tCF2ST0
(6)
tCLK
CONF_DONE (3)
t
CH tCL
tCF2CD
tST2CK
(4)
(5)
DCLK
tDH
Bit 2 Bit 3
Bit n
Bit 0 Bit 1
DATA0
tDSU
High-Z
User I/O
User Mode
INIT_DONE (7)
tCD2UM
Notes to Figure 2–8:
(1) The beginning of this waveform shows the device in user mode. In user mode, nCONFIG
, nSTATUS, and CONF_DONEare at logic high levels. When
nCONFIGis pulled low, a reconfiguration cycle begins.
(2) After power up, the Arria V device holds nSTATUSlow for the time of the POR delay.
(3) After power up, before and during configuration, CONF_DONEis low.
(4) Do not leave DCLKfloating after configuration. You can drive it high or low, whichever is more convenient.
(5) DATA0is available as a user I/O pin after configuration. The state of this pin depends on the dual-purpose pin settings in the Device and Pins
Option.
(6) To ensure a successful configuration, send the entire configuration data to the Arria V device. CONF_DONEis released high after the Arria V device
receives all the configuration data successfully. After CONF_DONEgoes high, send two additional falling edges on DCLKto begin initialization
and enter user mode.
(7) After the option bit to enable the INIT_DONEpin is configured into the device, the INIT_DONEgoes low.
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–45
Configuration Specification
Table 2–43 lists the PS timing parameter for Arria V devices.
Table 2–43. PS Timing Parameters for Arria V Devices—Preliminary
Symbol
tCF2CD
Parameter
nCONFIGlow to CONF_DONElow
nCONFIGlow to nSTATUSlow
Minimum
Maximum
600
Unit
ns
—
—
tCF2ST0
600
ns
nCONFIGlow pulse width
nSTATUSlow pulse width
nCONFIGhigh to nSTATUShigh
nCONFIGhigh to first rising edge on DCLK
nSTATUShigh to first rising edge of DCLK
DATA[]setup time before rising edge on DCLK
DATA[]hold time after rising edge on DCLK
DCLKhigh time
2
—
µs
µs
µs
µs
µs
ns
tCFG
(1)
268
1506
tSTATUS
tCF2ST1
tCF2CK
tST2CK
tDSU
(2)
—
1506
1506
—
—
2
5.5
—
0
—
ns
ns
ns
ns
MHz
ns
ns
µs
—
tDH
0.45 x 1/fMAX
—
tCH
DCLKlow time
0.45 x 1/fMAX
—
tCL
DCLKperiod
1/fMAX
—
tCLK
DCLKfrequency
—
125
40
fMAX
tR
Input rise time
—
Input fall time
—
175
40
tF
CONF_DONEhigh to user mode (3)
CONF_DONEhigh to CLKUSRenabled
437
—
tCD2UM
tCD2CU
tCD2UMC
4 x maximum DCLKperiod
t
CD2CU + (Tinit x CLKUSR
CONF_DONEhigh to user mode with CLKUSRoption on
—
—
—
period)
Number of clock cycles required for device
initialization
Tinit
17,408
Cycles
Notes to Table 2–43:
(1) You can obtain this value if you do not delay configuration by extending the nCONFIGor nSTATUSlow pulse width.
(2) You can obtain this value if you do not delay configuration by externally holding nSTATUSlow.
(3) The minimum and maximum numbers apply only if you chose the internal oscillator as the clock source for initializing the device.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–46
Chapter 2: Device Datasheet for Arria V Devices
Configuration Specification
Remote System Upgrades Circuitry Timing Specification
Table 2–44 lists the timing parameter specifications for the remote system upgrade
circuitry.
Table 2–44. Remote System Upgrade Circuitry Timing Specification
Parameter
Minimum
Maximum
Unit
(1)
(3)
—
40
MHz
tMAX_RU_CLK
(2)
tRU_nCONFIG
250
250
—
—
ns
ns
tRU_nRSTIMER
Notes to Table 2–44:
(1) This clock is user-supplied to the remote system upgrade circuitry. If you are using the ALTREMOTE_UPDATE
megafunction, the clock user-supplied to the ALTREMOTE_UPDATE megafunction must meet this specification.
(2) This is equivalent to strobing the reconfiguration input of the ALTREMOTE_UPDATE megafunction high for the
minimum timing specification. For more information, refer to the “Remote System Upgrade State Machine”
section in the Device Interfaces and Integration Basics for Arria V Devices chapter.
(3) This is equivalent to strobing the reset timer input of the ALTREMOTE_UPDATE megafunction high for the
minimum timing specification. For more information, refer to the “User Watchdog Timer” section in the Device
Interfaces and Integration Basics for Arria V Devices chapter.
User Watchdog Internal Oscillator Frequency Specification
Table 2–45 lists the frequency specifications for the user watchdog internal oscillator.
Table 2–45. User Watchdog Internal Oscillator Frequency Specifications—Preliminary
Minimum
Typical
Maximum
Unit
5.3
7.9
12.5
MHz
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Chapter 2: Device Datasheet for Arria V Devices
2–47
I/O Timing
I/O Timing
Altera offers two ways to determine I/O timing—the Excel-based I/O Timing and the
Quartus II Timing Analyzer.
Excel-based I/O timing provides pin timing performance for each device density and
speed grade. The data is typically used prior to designing the FPGA to get an estimate
of the timing budget as part of the link timing analysis. The Quartus II Timing
Analyzer provides a more accurate and precise I/O timing data based on the specifics
of the design after you complete place-and-route.
f
You can download the Excel-based I/O Timing spreadsheet from the Arria V Devices
Literature webpage.
Programmable IOE Delay
Table 2–46 lists the Arria V IOE programmable delay settings.
Table 2–46. IOE Programmable Delay for Arria V Devices (1)
Fast Model
Slow Model
Available
Settings
Minimum
Offset
Parameter
Unit
Industrial
Commercial
TBD
C4
C5, I5
TBD
TBD
TBD
TBD
TBD
C6
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
ns
ns
ns
ns
ns
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Note to Table 2–46:
(1) Pending the Quartus II software extraction.
Programmable Output Buffer Delay
Table 2–47 lists the delay chain settings that control the rising and falling edge delays
of the output buffer. The default delay is 0 ps.
(1), (2)
Table 2–47. Programmable Output Buffer Delay—Preliminary
Symbol
Parameter
Typical
0 (default)
50
Unit
ps
ps
Rising and/or falling edge
delay
DOUTBUF
100
ps
150
ps
Notes to Table 2–47:
(1) Pending the Quartus II software extraction.
(2) You can set the programmable output buffer delay in the Quartus II software by setting the Output Buffer Delay
Control assignment to either positive, negative, or both edges, with the specific values stated here (in ps) for the
Output Buffer Delay assignment.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–48
Chapter 2: Device Datasheet for Arria V Devices
Glossary
Glossary
Table 2–48 lists the glossary for this chapter.
Table 2–48. Glossary Table (Part 1 of 4)
Letter
Subject
Definitions
A
B
C
—
—
Receiver Input Waveforms
Single-Ended Waveform
Positive Channel (p) = V
IH
V
ID
Negative Channel (n) = V
Ground
IL
V
CM
Differential Waveform
V
ID
p - n = 0 V
V
ID
Differential I/O
Standards
D
Transmitter Output Waveforms
Single-Ended Waveform
Positive Channel (p) = V
OH
V
OD
Negative Channel (n) = V
Ground
OL
V
CM
Differential Waveform
V
OD
p - n = 0 V
V
OD
E
F
—
—
fHSCLK
Left/right PLL input clock frequency.
High-speed I/O block—Maximum/minimum LVDS data transfer rate
(fHSDR = 1/TUI), non-DPA.
fHSDR
High-speed I/O block—Maximum/minimum LVDS data transfer rate
(fHSDRDPA = 1/TUI), DPA.
fHSDRDPA
G
H
I
—
—
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 2: Device Datasheet for Arria V Devices
2–49
Glossary
Table 2–48. Glossary Table (Part 2 of 4)
Letter
Subject
Definitions
High-speed I/O block—Deserialization factor (width of parallel data bus).
JTAG Timing Specifications:
J
TMS
TDI
tJCP
J
JTAG Timing
Specifications
tJCH
t JCL
tJPH
tJPSU
TCK
TDO
tJPXZ
tJPZX
tJPCO
K
L
M
N
O
—
—
(1)
Diagram of PLL Specifications
CLKOUT Pins
fOUT_EXT
Switchover
4
CLK
fIN
fINPFD
N
GCLK
RCLK
Counters
C0..C17
fVCO
VCO
fOUT
PFD
CP
LF
Core Clock
PLL
Specifications
P
Delta Sigma
Modulator
Key
External Feedback
Reconfigurable in User Mode
Note:
(1) Core Clockcan only be fed by dedicated clock input pins or PLL outputs.
Q
R
—
—
RL
Receiver differential input discrete resistor (external to the Arria V device).
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–50
Chapter 2: Device Datasheet for Arria V Devices
Glossary
Table 2–48. Glossary Table (Part 3 of 4)
Letter
Subject
Definitions
Timing Diagram—the period of time during which the data must be valid in order to capture
it correctly. The setup and hold times determine the ideal strobe position in the sampling
window, as shown:
Sampling
Bit Time
window (SW)
Sampling Window
(SW)
RSKM
RSKM
0.5 x TCCS
0.5 x TCCS
The JEDEC standard for the SSTl and HSTL I/O defines both the AC and DC input signal
values. The AC values indicate the voltage levels at which the receiver must meet its timing
specifications. The DC values indicate the voltage levels at which the final logic state of the
receiver is unambiguously defined. After the receiver input has crossed the AC value, the
receiver changes to the new logic state.
The new logic state is then maintained as long as the input stays beyond the AC threshold.
This approach is intended to provide predictable receiver timing in the presence of input
waveform ringing, as shown:
S
Single-Ended Voltage Referenced I/O Standard
Single-ended
voltage
VCCIO
referenced I/O
standard
VOH
VIH
(
)
AC
VIH(DC)
VREF
VIL(DC)
VIL(AC
)
VOL
VSS
tC
High-speed receiver/transmitter input and output clock period.
The timing difference between the fastest and slowest output edges, including the tCO
variation and clock skew, across channels driven by the same PLL. The clock is included in
the TCCS measurement (refer to the Timing Diagram figure under SW in this table).
TCCS (channel-
to-channel-skew)
High-speed I/O block—Duty cycle on high-speed transmitter output clock.
Timing Unit Interval (TUI)
tDUTY
The timing budget allowed for skew, propagation delays, and the data sampling window.
T
(TUI = 1/(Receiver Input Clock Frequency Multiplication Factor) = tC/w)
tFALL
Signal high-to-low transition time (80–20%)
Cycle-to-cycle jitter tolerance on the PLL clock input
Period jitter on the GPIO driven by a PLL
Period jitter on the dedicated clock output driven by a PLL
Signal low-to-high transition time (20–80%)
—
tINCCJ
tOUTPJ_IO
tOUTPJ_DC
tRISE
U
—
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
February 2012 Altera Corporation
Chapter 2: Device Datasheet for Arria V Devices
2–51
Document Revision History
Table 2–48. Glossary Table (Part 4 of 4)
Letter
Subject
VCM(DC)
Definitions
DC Common mode input voltage.
VICM
Input Common mode voltage—The common mode of the differential signal at the receiver.
Input differential voltage swing—The difference in voltage between the positive and
complementary conductors of a differential transmission at the receiver.
VID
VDIF(AC)
VDIF(DC)
AC differential input voltage—Minimum AC input differential voltage required for switching.
DC differential input voltage— Minimum DC input differential voltage required for switching.
Voltage input high—The minimum positive voltage applied to the input which is accepted by
the device as a logic high.
VIH
VIH(AC)
VIH(DC)
High-level AC input voltage
High-level DC input voltage
V
Voltage input low—The maximum positive voltage applied to the input which is accepted by
the device as a logic low.
VIL
VIL(AC)
VIL(DC)
Low-level AC input voltage
Low-level DC input voltage
Output Common mode voltage—The common mode of the differential signal at the
transmitter.
VOCM
VOD
Output differential voltage swing—The difference in voltage between the positive and
complementary conductors of a differential transmission at the transmitter.
VSWING
VX
Differential input voltage
Input differential cross point voltage
Output differential cross point voltage
High-speed I/O block—Clock Boost Factor
VOX
W
W
X,
Y,
Z
—
—
Document Revision History
Table 2–49 lists the revision history for this chapter.
Table 2–49. Document Revision History
Date
Version
1.3
Changes
■ Updated Table 2–1.
February 2012
December 2011
November 2011
August 2011
■ Updated Transceiver-FPGA Fabric Interface rows in Table 2–20.
■ Updated VCCP description.
1.2
Updated Table 2–1, and Table 2–3.
■ Updated Table 2–1, Table 2–19, Table 2–26, and Table 2–36.
■ Added Table 2–5.
1.1
■ Added Figure 2–4.
1.0
Initial release.
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
2–52
Chapter 2: Device Datasheet for Arria V Devices
Document Revision History
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
Additional Information
This chapter provides additional information about the document and Altera.
How to Contact Altera
To locate the most up-to-date information about Altera products, refer to the
following table.
Contact (1)
Technical support
Contact Method
Website
Website
Email
Address
www.altera.com/support
www.altera.com/training
custrain@altera.com
Technical training
Product literature
Website
Email
www.altera.com/literature
nacomp@altera.com
Nontechnical support (general)
(software licensing)
Note to Table:
Email
authorization@altera.com
(1) You can also contact your local Altera sales office or sales representative.
Typographic Conventions
The following table shows the typographic conventions this document uses.
Visual Cue
Meaning
Indicate command names, dialog box titles, dialog box options, and other GUI
labels. For example, Save As dialog box. For GUI elements, capitalization matches
the GUI.
Bold Type with Initial Capital
Letters
Indicates directory names, project names, disk drive names, file names, file name
extensions, software utility names, and GUI labels. For example, \qdesigns
directory, D: drive, and chiptrip.gdf file.
bold type
Italic Type with Initial Capital Letters Indicate document titles. For example, Stratix IV Design Guidelines.
Indicates variables. For example, n + 1.
italic type
Variable names are enclosed in angle brackets (< >). For example, <file name> and
<project name>.pof file.
Indicate keyboard keys and menu names. For example, the Delete key and the
Options menu.
Initial Capital Letters
“Subheading Title”
Quotation marks indicate references to sections in a document and titles of
Quartus II Help topics. For example, “Typographic Conventions.”
February 2012 Altera Corporation
Arria V Device Handbook
Volume 1: Device Overview and Datasheet
Info–2
Additional Information
Typographic Conventions
Visual Cue
Meaning
Indicates signal, port, register, bit, block, and primitive names. For example, data1
tdi, and input. The suffix denotes an active-low signal. For example, resetn
Indicates command line commands and anything that must be typed exactly as it
appears. For example, c:\qdesigns\tutorial\chiptrip.gdf
,
n
.
Courier type
.
Also indicates sections of an actual file, such as a Report File, references to parts of
files (for example, the AHDL keyword SUBDESIGN), and logic function names (for
example, TRI).
r
An angled arrow instructs you to press the Enter key.
1., 2., 3., and
Numbered steps indicate a list of items when the sequence of the items is important,
such as the steps listed in a procedure.
a., b., c., and so on
■
■
■
Bullets indicate a list of items when the sequence of the items is not important.
The hand points to information that requires special attention.
1
h
A question mark directs you to a software help system with related information.
The feet direct you to another document or website with related information.
f
A caution calls attention to a condition or possible situation that can damage or
destroy the product or your work.
c
A warning calls attention to a condition or possible situation that can cause you
injury.
w
The envelope links to the Email Subscription Management Center page of the Altera
website, where you can sign up to receive update notifications for Altera documents.
Arria V Device Handbook
February 2012 Altera Corporation
Volume 1: Device Overview and Datasheet
相关型号:
5AGTFD7H3F35I3N
Field Programmable Gate Array, 670MHz, 504000-Cell, CMOS, PBGA1152, ROHS COMPLIANT, FBGA-1152
INTEL
5AGTFD7K3F40I3N
Field Programmable Gate Array, 670MHz, 504000-Cell, CMOS, PBGA1517, ROHS COMPLIANT, FBGA-1517
INTEL
©2020 ICPDF网 联系我们和版权申明