ASM5P23S09AF-1-16-SR [ALSC]
3.3V SpreadTrak Zero Delay Buffer; 3.3V SpreadTrak零延迟缓冲器
| 型号： | ASM5P23S09AF-1-16-SR |
| 厂家： | 
ALLIANCE SEMICONDUCTOR CORPORATION |
| 描述： | 3.3V SpreadTrak Zero Delay Buffer |
| 文件： | 总18页 (文件大小：382K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
3.3V ‘SpreadTrak’ Zero Delay Buffer
General Features
out five low-skew clocks.
ꢀ
15 MHz to 133 MHz operating range, compatible
The -1H version of the ASM5P23SxxA operates at up to
133 MHz frequency, and has higher drive than the -1
device. All parts have on-chip PLLs that lock to an input
clock on the REF pin. The PLL feedback is on-chip and is
obtained from the CLKOUT pad.
with CPU and PCI bus frequencies.
Zero input - output propagation delay.
Multiple low-skew outputs.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Output-output skew less than 250 pS.
Device-device skew less than 700 pS.
One input drives 9 outputs, grouped as 4+4+1
(ASM5P23S09A).
The ASM5P23S09A has two banks of four outputs each,
which can be controlled by the Select inputs as shown in
the Select Input Decoding Table. If all the output clocks are
not required, Bank B can be three-stated. The select input
also allows the input clock to be directly applied to the
outputs for chip and system testing purposes.
ꢀ
One input drives 5 outputs (ASM5P23S05A).
ꢀ
ꢀ
ꢀ
Less than 200 pS cycle-to-cycle jitter is compatible
with Pentium® based systems.
Test Mode to bypass PLL (ASM5P23S09A only,
refer Select Input Decoding Table).
Available in 16-pin, 150-mil SOIC and 4.4 mm
TSSOP packages for ASM5P23S09A and in
8-pin, 150-mil SOIC and 4.4 mm TSSOP
packages for ASM5P23S05A.
Multiple ASM5P23S09A and ASM5P23S05A devices can
accept the same input clock and distribute it. In this case
the skew between the outputs of the two devices is
guaranteed to be less than 700 pS.
ꢀ
ꢀ
ꢀ
3.3V operation
Advanced 0.35µ CMOS technology.
‘SpreadTrak’.
All outputs have less than 200 pS of cycle-to-cycle jitter.
The input and output propagation delay is guaranteed to be
less than 250 pS, and the output to output skew is
guaranteed to be less than 250 pS.
Functional Description
ASM5P23S09A is a versatile, 3.3V zero-delay buffer
designed to distribute high-speed clocks with Spread
Spectrum capability. It is available in a 16-pin package. The
ASM5P23S05A is the eight-pin version of the
ASM5P23S09A. It accepts one reference input and drives
The ASM5P23S09A and the ASM5P23S05A are available
in two different configurations, as shown in the ordering
information table. The ASM5P23SxxA-1 is the base part.
The ASM5P23SxxA-1H is the high drive version of the -1
part and its rise and fall times are much faster than -1 part.
Block Diagram
MUX
CLKOUT
CLKA1
CLKA2
CLKA3
PLL
CLKOUT
REF
PLL
REF
CLK1
CLK2
CLK3
CLK4
CLKA4
CLKB1
CLKB2
CLKB3
CLKB4
S2
S1
Select Input
Decoding
ASM5P23S09A
ASM5P23S05A
Alliance Semiconductor
2575, Augustine Drive • Santa Clara, CA • Tel: 408.855.4900 • Fax: 408.855.4999 • www.alsc.com
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Select Input Decoding for ASM5P23S09A
PLL
S2
S1
Clock A1 - A4
Clock B1 - B4
CLKOUT 1 Output Source
Shut-Down
0
0
1
1
0
1
0
1
Three-state
Driven
Three-state
Three-state
Driven
Driven
Driven
Driven
Driven
PLL
PLL
N
N
Y
N
Driven
Reference
PLL
Driven
Driven
Note:
1. This output is driven and has an internal feedback for the PLL. The load on this output can be adjusted to change the skew between the reference and the
output.
Zero Delay and Skew Control
SpreadTrak
All outputs should be uniformly loaded to achieve Zero
Delay between input and output. Since the CLKOUT pin is
the internal feedback to the PLL, its relative loading can
Many systems being designed now utilize a technology
called Spread Spectrum Frequency Timing Generation.
ASM5P23S09A and ASM5P23S05A are designed so as
not to filter off the Spread Spectrum feature of the
Reference input, assuming it exists. When a zero delay
buffer is not designed to pass the Spread Spectrum feature
through, the result is a significant amount of tracking skew
which may cause problems in the systems requiring
synchronization.
adjust the input-output delay.
For applications requiring zero input-output delay, all
outputs, including CLKOUT, must be equally loaded. Even
if CLKOUT is not used, it must have a capacitive load equal
to that on other outputs, for obtaining zero-input-output
delay.
3.3V ‘SpreadTrak’ Zero Delay Buffer
2 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Pin Configuration
REF
CLKOUT
16
15
1
2
CLKA1
CLKA4
CLKA3
CLKA2
14
13
3
4
5
6
V
V
DD
DD
ASM5P23S09A
GND
GND
12
11
CLKB1
CLKB4
CLKB3
CLKB2
S2
10
9
7
8
S1
CLKOUT
CLK4
REF
8
7
6
1
2
CLK2
ASM5P23S05A
CLK1
GND
V
3
4
DD
CLK3
5
3.3V ‘SpreadTrak’ Zero Delay Buffer
3 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Pin Description for ASM5P23S09A
Pin #
Pin Name
Description
Input reference frequency, 5V tolerant input
1
2
REF2
CLKA13
CLKA23
VDD
Buffered clock output, bank A
Buffered clock output, bank A
3.3V supply
3
4
5
GND
Ground
6
CLKB13
CLKB23
S24
Buffered clock output, bank B
Buffered clock output, bank B
Select input, bit 2
7
8
9
S14
Select input, bit 1
10
11
12
13
14
15
16
CLKB33
CLKB43
GND
Buffered clock output, bank B
Buffered clock output, bank B
Ground
VDD
3.3V supply
CLKA33
CLKA43
CLKOUT3
Buffered clock output, bank A
Buffered clock output, bank A
Buffered output, internal feedback on this pin
Pin Description for ASM5P23S05A
Pin #
Pin Name
Description
Input reference frequency, 5V-tolerant input
1
2
3
4
5
6
7
8
REF2
CLK23
CLK13
GND
Buffered clock output
Buffered clock output
Ground
CLK33
Buffered clock output
3.3V supply
VDD
CLK43
CLKOUT3
Buffered clock output
Buffered clock output, internal feedback on this pin
Notes:
2. Weak pull-down.
3. Weak pull-down on all outputs.
4. Weak pull-up on these inputs.
3.3V ‘SpreadTrak’ Zero Delay Buffer
4 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Absolute Maximum Ratings
Parameter
Min
Max
Unit
Supply Voltage to Ground Potential
DC Input Voltage (Except REF)
DC Input Voltage (REF)
-0.5
-0.5
-0.5
-65
+7.0
VDD + 0.5
7
V
V
V
Storage Temperature
+150
260
°C
°C
°C
V
Max. Soldering Temperature (10 sec)
Junction Temperature
150
Static Discharge Voltage
2000
(per MIL-STD-883, Method 3015)
Note: These are stress ratings only and functional usage is not implied. Exposure to absolute maximum ratings for prolonged periods can affect device
reliability.
Operating Conditions for ASM5P23S05A and ASM5P23S09A - Commercial Temperature Devices
Parameter
Description
Min
Max
Unit
VDD
TA
Supply Voltage
3.0
0
3.6
70
30
10
7
V
Operating Temperature (Ambient Temperature)
Load Capacitance, below 100 MHz
Load Capacitance, from 100 MHz to 133 MHz
Input Capacitance
°C
pF
pF
pF
CL
CL
CIN
Electrical Characteristics for ASM5P23S05A and ASM5P23S09A - Commercial Temperature Devices
Parameter
Description
Input LOW Voltage5
Input HIGH Voltage5
Input LOW Current
Input HIGH Current
Output LOW Voltage6
Test Conditions
Min
Typ
Max
Unit
VIL
VIH
IIL
0.8
V
V
2.0
VIN = 0V
50.0
100.0
0.4
µA
µA
V
IIH
VIN = VDD
VOL
IOL = 8mA (-1)
IOH = 12mA (-1H)
IOL = -8mA (-1)
VOH
IDD
ZO
Output HIGH Voltage6
Supply Current
2.4
V
mA
Ω
IOH = -12mA (-1H)
Unloaded outputs at
66.67 MHz, SEL inputs at VDD
34
Output Impedance
23
Notes:
5. REF input has a threshold voltage of VDD/2
6. Parameter is guaranteed by design and characterization. Not 100% tested in production
3.3V ‘SpreadTrak’ Zero Delay Buffer
5 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Switching Characteristics for ASM5P23S05A-1 and ASM5P23S09A-1 Commercial Temperature Devices7
Parameter
Description
Test Conditions
Min
Typ
Max
Unit
1/t1
Output Frequency
30-pF load
10-pF load
15
15
100
133
MHz
Duty Cycle 8 = (t2 / t1) * 100 Measured at 1.4V, FOUT = 66.67 MHz
40.0
50.0
60.0
2.50
2.50
250
%
t3
t4
t5
t6
Output Rise Time 8
Output Fall Time 8
Output-to-output skew 8
Measured between 0.8V and 2.0V
Measured between 2.0V and 0.8V
All outputs equally loaded
nS
nS
pS
pS
Delay, REF Rising Edge to Measured at VDD /2
CLKOUT Rising Edge 8
0
0
±350
t7
Device-to-Device Skew 8
Measured at VDD/2 on the CLKOUT pins of
700
pS
the device
tJ
Cycle-to-cycle jitter 8
PLL Lock Time 8
Measured at 66.67 MHz, loaded outputs
Stable power supply, valid clock presented
on REF pin
200
1.0
pS
tLOCK
mS
Notes:
7. All parameters specified with loaded outputs.
8. Parameter is guaranteed by design and characterization. Not 100% tested in production
Operating Conditions for ASM5I23S05A and ASM5I23S09A Industrial Temperature Devices
Parameter
Description
Min
Max
Unit
VDD
TA
Supply Voltage
3.0
-40
3.6
85
30
15
7
V
Operating Temperature (Ambient Temperature)
Load Capacitance, below 100 MHz
Load Capacitance, from 100 MHz to 133 MHz
Input Capacitance
°C
pF
pF
pF
CL
CL
CIN
3.3V ‘SpreadTrak’ Zero Delay Buffer
6 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Electrical Characteristics for ASM5I23S05A and ASM5I23S09A Industrial Temperature Devices
Parameter
Description
Test Conditions
Min
Typ
Max
Unit
VIL
VIH
IIL
Input LOW Voltage
Input HIGH Voltage
Input LOW Current
Input HIGH Current
0.8
V
V
2.0
VIN = 0V
50.0
µA
µA
IIH
VIN = VDD
100.0
IOL = 8mA (-1, -2)
OH = 12mA (-1H, -5H)
VOL
Output LOW Voltage
Output HIGH Voltage
0.4
V
V
I
IOL = -8mA (-1)
OH = -12mA (-1H)
VOH
2.4
I
Unloaded outputs 100MHz REF,
Select inputs at VDD or GND
50
IDD
Supply Current
mA
Unloaded outputs, 66.67MHz REF (-1)
Unloaded outputs, 33MHz REF (-1)
34
19
Ω
ZO
Output Impedance
23
3.3V ‘SpreadTrak’ Zero Delay Buffer
7 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Switching Characteristics for ASM5I23S05A-1H and ASM5I23S09A-1H Industrial Temperature Devices7
Parameter
Description
Output Frequency
Test Conditions
Min
Typ
Max
Unit
1/t1
30 pF load
10 pF load
15
15
100
133
MHz
Duty Cycle 9 = (t2 / t1) * 100
Duty Cycle 9 = (t2 / t1) * 100
Output Rise Time 9
Measured at 1.4 V, FOUT = 66.67 MHz
Measured at 1.4 V, FOUT < 50.0 MHz
Measured between 0.8V and 2.0V
Measured between 2.0V and 0.8V
All outputs equally loaded
40.0
45.0
50.0
50.0
60.0
55.0
1.50
1.50
250
%
t3
t4
t5
t6
nS
nS
pS
pS
Output Fall Time 9
Output-to-output skew 9
Delay, REF Rising Edge to
CLKOUT Rising Edge 9
Device-to-Device Skew 9
Measured at VDD /2
0
0
± 350
t7
t8
Measured at VDD/2 on the CLKOUT
pins of the device
700
pS
V/nS
pS
Output Slew Rate 9
Cycle-to-cycle jitter 9
PLL Lock Time 9
Measured between 0.8V and 2.0V
using Test Circuit #2
1
tJ
Measured at 66.67 MHz, loaded
outputs
200
1.0
tLOCK
Stable power supply, valid clock pre
sented on REF pin
mS
Note:
9. Parameter is guaranteed by design and characterization. Not 100% tested in production
3.3V ‘SpreadTrak’ Zero Delay Buffer
8 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Switching Waveforms
Duty Cycle Timing
t2
t1
1.4 V
1.4 V
1.4 V
All Outputs Rise/Fall Time
3. 3 V
0 V
2.0 V
0. 8 V
2.0 V
0.8 V
OUTPUT
t4
t3
Output - Output Skew
1. 4 V
OUTPUT
1.4 V
OUTPUT
t5
Input - Output Propagation Delay
VDD /2
INPUT
VDD /2
OUTPUT
t6
Device - Device Skew
VDD /2
CLKOUT, Device 1
VDD /2
CLKOUT, Device 2
t7
3.3V ‘SpreadTrak’ Zero Delay Buffer
9 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Test Circuits
Test Circuit #1
Test Circuit #2
V
V
V
1k
DD
DD
Ω
CLK OUT
OUTPUTS
GND
OUTPUTS
0.1 µF
0.1 µF
0.1 µF
1k
Ω
C
10 pF
LOAD
V
DD
DD
GND
GND
GND
0.1 µF
For parameter 8t
3.3V ‘SpreadTrak’ Zero Delay Buffer
10 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Package Information
8-lead (150-mil) SOIC Package
H
E
D
A2
A
C
θ
e
A1
L
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
A1
A
0.004
0.053
0.049
0.012
0.007
0.010
0.069
0.059
0.020
0.010
0.10
1.35
1.25
0.31
0.18
0.25
1.75
1.50
0.51
0.25
A2
B
C
D
E
0.193 BSC
0.154 BSC
0.050 BSC
0.236 BSC
4.90 BSC
3.91 BSC
1.27 BSC
6.00 BSC
e
H
L
0.016
0°
0.050
8°
0.41
0°
1.27
8°
θ
3.3V ‘SpreadTrak’ Zero Delay Buffer
11 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
8-lead Thin Shrunk Small Outline Package (4.40-MM Body)
H
E
D
A2
A
C
θ
e
A1
L
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
A
A1
A2
B
0.043
0.006
0.037
0.012
0.008
0.122
0.177
1.10
0.15
0.95
0.30
0.20
3.10
4.50
0.002
0.033
0.008
0.004
0.114
0.169
0.05
0.85
0.19
0.09
2.90
4.30
c
D
E
e
0.026 BSC
0.252 BSC
0.65 BSC
6.40 BSC
H
L
0.020
0°
0.028
8°
0.50
0°
0.70
8°
θ
3.3V ‘SpreadTrak’ Zero Delay Buffer
12 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
16-lead (150 Mil) Molded SOIC Package
PIN 1 ID
1
8
H
E
9
16
h
D
Seating Plane
A2
A
C
θ
0.004
e
L
A1
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
A
A1
A2
B
0.053
0.004
0.049
0.013
0.008
0.386
0.150
0.069
0.010
0.059
0.022
0.012
0.394
0.157
1.35
0.10
1.25
0.33
0.19
9.80
3.80
1.75
0.25
1.50
0.53
0.27
10.01
4.00
C
D
E
e
0.050 BSC
1.27 BSC
H
h
0.228
0.010
0.016
0°
0.244
0.016
0.035
8°
5.80
0.25
0.40
0°
6.20
0.41
0.89
8°
L
θ
3.3V ‘SpreadTrak’ Zero Delay Buffer
13 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
16-lead Thin Shrunk Small Outline Package (4.40-MM Body)
1
8
PIN 1 ID
E
H
9
16
A
Seating Plane
C
θ
A2
A1
e
B
L
D
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
A
A1
A2
B
0.043
0.006
0.041
0.012
0.008
0.201
0.177
1.20
0.15
1.05
0.30
0.20
5.10
4.50
0.002
0.031
0.007
0.004
0.193
0.169
0.05
0.80
0.19
0.09
4.90
4.30
C
D
E
e
0.026 BSC
0.252 BSC
0.65 BSC
6.40 BSC
H
L
0.020
0°
0.030
8°
0.50
0°
0.75
8°
θ
3.3V ‘SpreadTrak’ Zero Delay Buffer
14 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Ordering Codes
Ordering Code
Marking
5P23S09A-1
Package Type
Operating Range
ASM5P23S09A-1-16-ST
ASM5I23S09A-1-16-ST
ASM5P23S09A-1-16-SR
ASM5I23S09A-1-16-SR
ASM5P23S09A-1-16-TT
ASM5I23S09A-1-16-TT
ASM5P23S09A-1-16-TR
ASM5I23S09A-1-16-TR
16-pin 150-mil SOIC-TUBE
Commercial
Industrial
5I23S09A-1
5P23S09A-1
5I23S09A-1
5P23S09A-1
5I23S09A-1
5P23S09A-1
5I23S09A-1
16-pin 150-mil SOIC-TUBE
16-pin 150-mil SOIC-TAPE & REEL
16-pin 150-mil SOIC-TAPE & REEL
16-pin 4.4-mm TSSOP-TUBE
16-pin 4.4-mm TSSOP-TUBE
16-pin 4.4-mm TSSOP-TAPE & REEL
16-pin 4.4-mm TSSOP-TAPE & REEL
16-pin 150-mil SOIC-TUBE
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
ASM5P23S09A-1H-16-ST 5P23S09A-1H
ASM5I23S09A-1H-16-ST 5I23S09A-1H
ASM5P23S09A-1H-16-SR 5P23S09A-1H
ASM5I23S09A-1H-16-SR 5I23S09A-1H
ASM5P23S09A-1H-16-TT 5P23S09A-1H
ASM5I23S09A-1H-16-TT 5I23S09A-1H
ASM5P23S09A-1H-16-TR 5P23S09A-1H
ASM5I23S09A-1H-16-TR 5I23S09A-1H
Commercial
Industrial
16-pin 150-mil SOIC-TUBE
16-pin 150-mil SOIC-TAPE & REEL
16-pin 150-mil SOIC-TAPE & REEL
16-pin 4.4-mm TSSOP-TUBE
16-pin 4.4-mm TSSOP-TUBE
16-pin 4.4-mm TSSOP-TAPE & REEL
16-pin 4.4-mm TSSOP-TAPE & REEL
8-pin 150-mil SOIC-TUBE
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
ASM5P23S05A-1-08-ST
ASM5I23S05A-1-08-ST
ASM5P23S05A-1-08-SR
ASM5I23S05A-1-08-SR
ASM5P23S05A-1-08-TT
ASM5I23S05A-1-08-TT
ASM5P23S05A-1-08-TR
ASM5I23S05A-1-08-TR
5P23S05A-1
5I23S05A-1
5P23S05A-1
5I23S05A-1
5P23S05A-1
5I23S05A-1
5P23S05A-1
5I23S05A-1
Commercial
Industrial
8-pin 150-mil SOIC-TUBE
8-pin 150-mil SOIC-TAPE & REEL
8-pin 150-mil SOIC-TAPE & REEL
8-pin 4.4-mm TSSOP-TUBE
Commercial
Industrial
Commercial
Industrial
8-pin 4.4-mm TSSOP-TUBE
8-pin 4.4-mm TSSOP-TAPE & REEL
8-pin 4.4-mm TSSOP-TAPE & REEL
8-pin 150-mil SOIC-TUBE
Commercial
Industrial
ASM5P23S05A-1H-08-ST 5P23S05A-1H
ASM5I23S05A-1H-08-ST 5I23S05A-1H
ASM5P23S05A-1H-08-SR 5P23S05A-1H
ASM5I23S05A-1H-08-SR 5I23S05A-1H
ASM5P23S05A-1H-08-TT 5P23S05A-1H
ASM5I23S05A-1H-08-TT 5I23S05A-1H
ASM5P23S05A-1H-08-TR 5P23S05A-1H
ASM5I23S05A-1H-08-TR 5I23S05A-1H
Commercial
Industrial
8-pin 150-mil SOIC-TUBE
8-pin 150-mil SOIC-TAPE & REEL
8-pin 150-mil SOIC-TAPE & REEL
8-pin 4.4-mm TSSOP-TUBE
Commercial
Industrial
Commercial
Industrial
8-pin 4.4-mm TSSOP-TUBE
8-pin 4.4-mm TSSOP-TAPE & REEL
8-pin 4.4-mm TSSOP-TAPE & REEL
Commercial
Industrial
3.3V ‘SpreadTrak’ Zero Delay Buffer
15 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Ordering Codes (Contd..)
Ordering Code
Marking
Package Type
Operating Range
ASM5P23S09AF-1-16-ST
ASM5I23S09AF-1-16-ST
5P23S09AF-1
5I23S09AF-1
16-pin 150-mil SOIC-TUBE, Pb free
Commercial
Industrial
16-pin 150-mil SOIC-TUBE, Pb free
ASM5P23S09AF-1-16-SR 5P23S09AF-1
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-pin 4.4-mm TSSOP-TUBE, Pb free
16-pin 4.4-mm TSSOP-TUBE, Pb free
Commercial
Industrial
ASM5I23S09AF-1-16-SR
ASM5P23S09AF-1-16-TT
ASM5I23S09AF-1-16-TT
ASM5P23S09AF-1-16-TR
ASM5I23S09AF-1-16-TR
5I23S09AF-1
5P23S09AF-1
5I23S09AF-1
5P23S09AF-1
5I23S09AF-1
Commercial
Industrial
16-pin 4.4-mm TSSOP-TAPE & REEL, Pb free
16-pin 4.4-mm TSSOP-TAPE & REEL, Pb free
16-pin 150-mil SOIC-TUBE, Pb free
Commercial
Industrial
ASM5P23S09AF-1H-16-ST 5P23S09AF-1H
ASM5I23S09AF-1H-16-ST 5I23S09AF-1H
ASM5P23S09AF-1H-16-SR 5P23S09AF-1H
ASM5I23S09AF-1H-16-SR 5I23S09AF-1H
ASM5P23S09AF-1H-16-TT 5P23S09AF-1H
ASM5I23S09AF-1H-16-TT 5I23S09AF-1H
ASM5P23S09AF-1H-16-TR 5P23S09AF-1H
ASM5I23S09AF-1H-16-TR 5I23S09AF-1H
Commercial
Industrial
16-pin 150-mil SOIC-TUBE, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-pin 4.4-mm TSSOP-TUBE, Pb free
16-pin 4.4-mm TSSOP-TUBE, Pb free
16-pin 4.4-mm TSSOP-TAPE & REEL, Pb free
16-pin 4.4-mm TSSOP-TAPE & REEL, Pb free
8-pin 150-mil SOIC-TUBE, Pb free
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
ASM5P23S05AF-1-08-ST
ASM5I23S05AF-1-08-ST
5P23S05AF-1
5I23S05AF-1
Commercial
Industrial
8-pin 150-mil SOIC-TUBE, Pb free
ASM5P23S05AF-1-08-SR 5P23S05AF-1
8-pin 150-mil SOIC-TAPE & REEL, Pb free
8-pin 150-mil SOIC-TAPE & REEL, Pb free
8-pin 4.4-mm TSSOP-TUBE, Pb free
Commercial
Industrial
ASM5I23S05AF-1-08-SR
ASM5P23S05AF-1-08-TT
ASM5I23S05AF-1-08-TT
ASM5P23S05AF-1-08-TR
ASM5I23S05AF-1-08-TR
5I23S05AF-1
5P23S05AF-1
5I23S05AF-1
5P23S05AF-1
5I23S05AF-1
Commercial
Industrial
8-pin 4.4-mm TSSOP-TUBE, Pb free
8-pin 4.4-mm TSSOP-TAPE & REEL, Pb free
8-pin 4.4-mm TSSOP-TAPE & REEL, Pb free
8-pin 150-mil SOIC-TUBE, Pb free
Commercial
Industrial
ASM5P23S05AF-1H-08-ST 5P23S05AF-1H
ASM5I23S05AF-1H-08-ST 5I23S05AF-1H
ASM5P23S05AF-1H-08-SR 5P23S05AF-1H
ASM5I23S05AF-1H-08-SR 5I23S05AF-1H
ASM5P23S05AF-1H-08-TT 5P23S05AF-1H
ASM5I23S05AF-1H-08-TT 5I23S05AF-1H
ASM5P23S05AF-1H-08-TR 5P23S05AF-1H
ASM5I23S05AF-1H-08-TR 5I23S05AF-1H
Commercial
Industrial
8-pin 150-mil SOIC-TUBE, Pb free
8-pin 150-mil SOIC-TAPE & REEL, Pb free
8-pin 150-mil SOIC-TAPE & REEL, Pb free
8-pin 4.4-mm TSSOP-TUBE, Pb free
Commercial
Industrial
Commercial
Industrial
8-pin 4.4-mm TSSOP-TUBE, Pb free
8-pin 4.4-mm TSSOP-TAPE & REEL, Pb free
8-pin 4.4-mm TSSOP-TAPE & REEL, Pb free
Commercial
Industrial
3.3V ‘SpreadTrak’ Zero Delay Buffer
16 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Device Ordering Information
A S M 5 P 2 3 S 0 5 A F - 0 8 T R
OR - SOT23/T/R
SR - SOIC, T/R
QR – QFN, T/R
QT - QFN, TUBE
BT - BGA, TUBE
BR – BGA, T/R
TT – TSSOP, TUBE
TR - TSSOP, T/R
VT – TVSOP, TUBE
VR – TVSOP, T/R
ST – SOIC, TUBE
PIN COUNT
LEAD FREE PART
PART NUMBER
X = Automotive
I = Industrial
P or n/c = Commercial
1 – reserved
6 – power management
2 - Non PLL based
3 – EMI Reduction
4 – DDR support products
5 – STD Zero Delay Buffer
7 – power management
8 – power management
9 – Hi performance
0 - reserved
Alliance Semiconductor Mixed Signal Product
Licensed under US patent #5,488,627, #6,646,463 and #5,631,920.
3.3V ‘SpreadTrak’ Zero Delay Buffer
17 of 18
Notice: The information in this document is subject to change without notice.
ASM5P23S09A
ASM5P23S05A
November 2004
rev 1.3
Copyright © Alliance Semiconductor
All Rights Reserved
Part Number: ASM5P23S09A
ASM5P23S05A
Document Version: 1.3
Alliance Semiconductor Corporation
2575, Augustine Drive,
Santa Clara, CA 95054
Tel# 408-855-4900
Fax: 408-855-4999
www.alsc.com
Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to Alliance Semiconductor, dated 11-11-2003
© Copyright 2003 Alliance Semiconductor Corporation. All rights reserved. Our three-point logo, our name and Intelliwatt are
trademarks or registered trademarks of Alliance. All other brand and product names may be the trademarks of their
respective companies. Alliance reserves the right to make changes to this document and its products at any time without
notice. Alliance assumes no responsibility for any errors that may appear in this document. The data contained herein
represents Alliance's best data and/or estimates at the time of issuance. Alliance reserves the right to change or correct this
data at any time, without notice. If the product described herein is under development, significant changes to these
specifications are possible. The information in this product data sheet is intended to be general descriptive information for
potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or
customer. Alliance does not assume any responsibility or liability arising out of the application or use of any product
described herein, and disclaims any express or implied warranties related to the sale and/or use of Alliance products
including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual
property rights, except as express agreed to in Alliance's Terms and Conditions of Sale (which are available from Alliance).
All sales of Alliance products are made exclusively according to Alliance's Terms and Conditions of Sale. The purchase of
products from Alliance does not convey a license under any patent rights, copyrights; mask works rights, trademarks, or any
other intellectual property rights of Alliance or third parties. Alliance does not authorize its products for use as critical
components in life-supporting systems where a malfunction or failure may reasonably be expected to result in significant
injury to the user, and the inclusion of Alliance products in such life-supporting systems implies that the manufacturer
assumes all risk of such use and agrees to indemnify Alliance against all claims arising from such use.
3.3V ‘SpreadTrak’ Zero Delay Buffer
18 of 18
Notice: The information in this document is subject to change without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明