700-SH25GA12 [ALLEN-BRADLEY]
Solid-State Relays; 固态继电器
| 型号： | 700-SH25GA12 |
| 厂家： | 
Allen-Bradley |
| 描述： | Solid-State Relays |
| 文件： | 总7页 (文件大小：598K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Bulletin 700-SH
Solid-State Relays
Overview/Product Selection
Table Of Contents
Bulletin 700-SH
Product Selection . . . . . . . 51
Accessories . . . . . . . . . . . . 52
Specifications . . . . . . . . . . 53
Approximate
Dimensions . . . . . . . . . . . . 56
•
•
•
•
•
•
40 A (resistive) Max. Continuous Load (Output) Current with Heat Sink
264V AC or 528V AC Max. Load Voltage Range Options
5…24V DC, 100…120V AC, 200…240V AC Control Input Voltage
LED Indicator for Input/Logic ON/OFF Status Monitoring
Built-in Varistor to Absorb Most Surges
Protective Cover for Added Safety (Meets VDE 106 Finger Safe Standard)
Basic Application
Considerations . . . . . . . . . 57
Product Selection
Factory-
Stocked
Item
(Single
Pack)
Input-to-Output
Isolation
Rated Output (Load)
Max. Current and
Voltage Range ➊
Zero Cross
Function
LED
Indicator
Rated Input
Control Voltage
Cat. No.
Method
Phototriac
Photocoupler
Phototriac
5…24V DC
100…120V AC
200…240V AC
5…24V DC
700-SH05GZ25
700-SH05GA12
700-SH05GA22
700-SH10GZ25
700-SH10GA12
700-SH10GA22
700-SH10HZ25
700-SH25GZ25
700-SH25GA12
700-SH25GA22
700-SH25HZ25
700-SH40GZ25
700-SH40GA12
700-SH40GA22
700-SH40HZ25
➊
➊
➊
➊
➊
➊
➊
➊
➊
➊
➊
➊
➊
➊
➊
5 A @ 24…240V AC
10 A @ 24…240V AC
10 A @ 200…480V AC
25 A @ 24…240V AC
25 A @ 200…480V AC
40 A @ 24…240V AC
40 A @ 200…480V AC
100…120V AC
200…240V AC
5…24V DC
Photocoupler
Phototriac
Yes
Yes
5…24V DC
100…120V AC
200…240V AC
5…24V DC
Photocoupler
Photocoupler
Phototriac
5…24V DC
100…120V AC
200…240V AC
5…24V DC
Photocoupler
➊ Maximum load current when mounted on a heat sink
51
Bulletin 700-SH
Solid-State Relays
Accessories
Description
Pkg. Qty
Cat. No.
Factory-Stocked Item
Heat Sink— Panel or DIN
1
700-S10
➊
Rail Mount ➊
Cat No. 700-S10
Heat Sink— Panel or DIN
1
700-S20
➊
Rail Mount ➊
Cat No. 700-S20
Heat Sink— Panel or DIN
1
700-S30
➊
Rail Mount ➊
Cat No. 700-S30
DIN Rail Mounting Pack
Standard 35 x 7.5 mm DIN
Rail, 1 meter long, 10 rails
per package. Order must
be for 10 rails or multiples
of 10.
10
199-DR1
➊
Cat No. 199-DR1
➊ For information regarding selection of the proper heat sink for your application, refer to "Heat Sink Size Vs. Load Current" graph on page 54 or "Load Current Vs.
Ambient Temperature Characteristics" on page 55.
52
Bulletin 700-SH
Solid-State Relays
Specifications
Control/Input Ratings
Rated Control
Voltage
Operating Control
Voltage Range
Cat. No.
Impedance ➊
Control Voltage Levels
Pick-up Voltage
4V DC max.
Drop-out Voltage
1V DC min.
5...24V DC
4...32V DC
15 mA max ➊
700-SH_ _G…
100...120V AC
200...240V AC
5...24V DC
75...132V AC
150…264V AC
4…32V DC
36 kΩ +/-20%
72 kΩ +/-20%
75V AC max. ➊
150V AC max. ➊
4V DC max.
20V AC min. ➊
40V AC min. ➊
1V DC min.
700-SH_ _ H…
Cat. No.
5 mA max. ➊
Load/Output Ratings
Applicable Load
Continuous Load
Current (Resistive)
Rated Load
Voltage
Load Voltage
Range
With Heat Sink (A) ➊
Without Heat Sink (A) ➊
Max. Inrush Current➊
—
—
Min.
Max.
Min.
Max.
3 A
4 A
4 A
4 A
4 A
6 A
6 A
700-SH05G…
700-SH10G…
700-SH10H…
700-SH25G…
700-SH25H…
700-SH40G…
700-SH40H…
0.1 A
0.1 A
0.2 A
0.1 A
0.2 A
0.1 A
0.2 A
5 A
0.1 A
0.1 A
0.2 A
0.1 A
0.2 A
0.1 A
0.2 A
60 A (@50/60 Hz, 1 cycle)
24…240V AC
19 …264V AC
10 A
10 A
25 A
25 A
40 A
40 A
150 A (@50/60 Hz, 1
cycle)
200…480V AC
24…240V AC
200…480V AC
24…240V AC
200…480V AC
180…528 VAC
19…264V AC
180…528V AC
19…264V AC
180…528V AC
220 A (@ 50/60 Hz, 1
cycle)
440 A (@ 50/60 Hz, 1
cycle)
➊ The input impedance is measured at the maximum value of the rated supply voltage.
➊ With a constant current input system, SSR impedance varies with a change in input voltage.
➊ Refer to graphs, “Temperature Characteristics…” and “Must Release Voltage” on page 54 for further details.
➊ When specified heat sink is used. Refer to accessories, page 52 for applicable heat sinks. For more details, refer to graphs “Load Current Vs. Ambient Temperature
Characteristics” on page 55, and the “Heat Sink vs. Load Current” graph on page 54.
➊ If the SSR operation is continuous ON/OFF, this value should be reduced by 50%. Refer to “Inrush Current Resistivity” graphs on page 54 for more details.
53
Bulletin 700-SH
Solid-State Relays
Specifications, Continued
Characteristics
Cat. No.
700-SH05G, -SH10G, SH25G
700-SH40G
700-SH10H, -SH25H, SH40H
Load Switching Method/
Device
Triac
Thyristor
1/2 of load power source + 1 ms max. (DC input)
3/2 of load power source + 1 ms max. (AC input)
Pick-up Time
1/2 of load power source + 1 ms max. (DC input)
3/2 of load power source + 1 ms max. (AC input)
Drop-out Time
Output ON Voltage Drop
1.6 V (RMS) max
1.8 V (RMS) max
10 mA max. (@ 200V AC)
20 mA max. (@ 400V AC)
1200
5 mA max (at 100V AC)
10 mA max (at 200V AC)
Output Leakage Current
Output VDRM, VCEO (V)
600
600
50
-SHO5G = 100,
-SHO10G, -SH25G= 50
Output di/dt (A/uS)
100
300
-SHO5G = 200,
-SHO10G, -SH25G= 100
Output dv/dt (V/uS)
100
-SHO5G = 24.5,
-SHO10G=112.5 -SH25G= 260
2
Output I t (A2S)
1260
260, SH40 = 1800
Output Tj °C Max.
Insulation Resistance
Dielectric Strength
125
100 MΩ min (at 500 VDC)
2,500V AC, 50/60 Hz for 1 minute
10…55 Hz, 1.5 mm double amplitude (10 G)
1,000 m/s2 (100 G)
Vibration Resistance (max.)
Shock Resistance (max.)
Operating: -30°C…80°C (-22°F…176°F) with no icing or condensation
Ambient Temperature
Storage: -30°C…100°C (-22°F…212°F) with no icing or condensation
Operating: 45%…85% (no condensation)
Ambient Humidity
Standards ➊
Weight
UL508, CSA C22.2, CE, TÜV
Approx. 60g
Approx. 70g
Approx. 80g
➊ Cat. No. 700-SH_ _ _HZ25 not CE or TÜV approved.
Inrush Current Resistivity➊
➊
➊ Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability
once every 2…5 seconds). Keep the inrush current to half the rated value if it occurs repetitively. Exceeding the non-repetitive inrush current will damage the SSR.
➊ The heat sink size refers to the combined area of the sides of the heat sink that radiate heat. For example, when a current of 18 A is allowed to flow through the SSR
at 40°C, the graph shows that the heat sink size is about 450 cm2. Therefore, if the heat sink is square, one side of the heat sink must be 15 cm (152 x 2 = 450) or longer.
54
Bulletin 700-SH
Solid-State Relays
Specifications, Continued
Load Current vs. Ambient Temperature Characteristics➊➊
➊ For the above 5 graphs, the line “with iron plate measuring 100 x 100 x 0.8” means the SSR is mounted directly to an iron plate of at least this size.
➊ All graphs assume conductive grease is being used. Refer to page 56 for details of using conductive grease.
55
Bulletin 700-SH
Solid-State Relays
Approximate Dimensions
Mounting Considerations➊➊➊➊➊
All units are in millimeters unless otherwise indicated. Dimensions are not intended for manufacturing purposes.
Terminal Arrangement/
Internal Connections (Top
View)
Four, M4 x 8
screws
4.5 dia.
Mounting Holes
Two, 4.3-dia.
or M4 holes
Load
Load
power
58 max. 47.5 44
supply
Load
2
1
47.6±0.2
(-)
4
(+)
3
Operating
indicator
13.8
4.5
25
43 max.
Input
25 max.
27 max.
Cat. No. 700-SH05…
4.5 dia.
Two, M5 x 12 screws
Mounting Holes
Two, 4.3-dia.
or M4 holes
58 min.47.5 44
47.6±0.2
Operating
indicator
13.8
4.5
25
25 max.
27 max.
Two,
M 4 x 8
Cat. No. 700-SH40
43 max.
➊ The proper mounting orientation of the heat sink is so the heat fins run perpendicular to the floor (vertical) to maximize ventilation flow.
➊ If the fins do not run perpendicular to the floor, a 30% current derating is required.
➊ When attaching a heat sink to Bulletin 700-SH, apply heat conductive grease on the heat sink to maximize heat transfer between the SSR and the heat sink.
Recommended types: Silicon based, Toshiba YG6240; Non-silicon based, AOS company type 53300.
➊ Tighten the SSR panel/heat sink mounting screws to a torque of 0.78…0.98 Nm (6.9…8.7 lb-in).
➊ Tighten the SSR terminal wiring screws as follows M4: 0.98…1.37 Nm (8.67…12.12 lb-in.), M5: 1.57…2.35 Nm (13.89…20.8 lb-in.)
Heat Sinks➊ ➊
Mounting Holes
Two, M3 holes
4.6 dia.
35±0.2
Two, 3.2-dia.
holes
Two, M4 holes
44 max. 30
47 max.
4.5
35 30.5 0.3
Two, 4.4-dia.
or M4 holes
90±0.4
47.6
5.6
5
6
77 max.
90±0.3
51 max.
Cat. No. 700-S10
100 max.
Mounting Holes
Two, M4
holes
Two, M3 holes
Two, 3.2-dia. holes
4.6 dia.
35±0.2
71 max.
35 30.5±0.3
30
75 max.
Two, 4.4-dia.
or M4 holes
90±0.4
28
5
13
4.5
47.6
77 max.
90±0.3
5.6
100 max.
Cat. No. 700-S20
100 max.
47.6
Two, 3.2-dia. holes
Mounting Holes
Three,
M4
holes
35±0.2
4.6 dia.
35
Two, 4.4-dia.
or M4 holes
100 max. 30
104 max.
90±0.4
28
5.6
5
100 max.
13
4.5
56±0.3
77 max.
90±0.3
Cat. No. 700-S30
100 max.
➊ Tighten the heat sink mounting screws (M4) to a torque of 0.98…1.37 Nm (8.67…12.12 lb-in).
➊ Heat sink weight: cat. nos. 700-S10 = 200 g, 700-S20 = 400 g, 700-S30 = 560 g
56
Bulletin 700-SH
Solid-State Relays
Basic Application Considerations
Load Connection
•
•
For an AC load, use a power supply rated at 50 or 60 Hz. The maximum operating frequency is 10 Hz.
The Bulletin 700-SH has a built-in varistor for surge/inrush protection of AC loads. If additional suppression is required, connect an external
varistor across the load device terminals. Select a varistor which meets the load voltage condition outlined in the table below.
Load Voltage
100…120V AC
200…240V AC
380…480V AC
Varistor Voltage
240…270 V
Varistor Surge Resistance
440…470V
1000 A min.
820…1000V
Zero Cross Function
A SSR with a zero cross function operates when an AC load voltage reaches the zero point or its vicinity. This reduces clicking noises when the load is
switched, and minimizes the influence of an inductive load, such as a lamp, heater, or motor, on the power supply because the inrush current of the load is
reduced. This can also minimize the scale of the inrush current protection circuit.
Output (load voltage)
ON
Input
OFF
At a low applied voltage, such as 24V AC, the load current is not fully supplied. When the unit is switched ON, the voltage required to power the unit deprives
the output signal of the necessary voltage level and thus creates loss time. The lower the load voltage is, the greater the loss time is. This condition, however,
will not create any serious problems.
Loss time
For a DC inductive load, a diode should be connected parallel to the load to absorb the counter electromotive force (OFF) of the load.
Load
Load power
supply
Input
SSR
Note: For additional details when using Solid-State Relays, refer to pub. 700-AT001A--EN-E, “Solid-State Relay Application Guide" available at
www.theautomationbookstore.com.
57
相关型号：
©2020 ICPDF网 联系我们和版权申明