A8178LLR [ALLEGRO]
LOW-DROPOUT, 7.7 V PREREGULATOR; 低压差, 7.7 V前置稳压器型号: | A8178LLR |
厂家: | ALLEGRO MICROSYSTEMS |
描述: | LOW-DROPOUT, 7.7 V PREREGULATOR |
文件: | 总4页 (文件大小:52K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
8178
PRODUCT PREVIEW
(Subject to change without notice)
April 5, 1996
LOW-DROPOUT,
7.7 V PREREGULATOR
Designed specifically to meet the stringent requirements of automo-
tive applications, the A8178LLR and A8178LLT provide an output
voltage of 7.7 V ±15% for supply voltages greater than 6.9 V. They
also provide a low-dropout tracking output for supply voltages down to
2.5 V. These regulators are intended to be used with sensitive automo-
tive electronics systems that do not have the capability of low dropout
operation and cannot withstand the high-voltage transients typical of
automotive applications. These 7.7 V preregulators will withstand all
ISO pulses (ignition coil disconnect requires an external diode) and will
continue to operate during positive power supply transients (noise).
3
VR
1
2
These devices are supplied in small-outline plastic transistor
packages for surface-mount applications. The A8178LLR is supplied in
the minimum footprint SOT-23/TO-236AB; the A8178LLT is furnished in
the SOT-89/TO-243AA for increased allowable package power dissipa-
tion.
7.7 V
VR
1
2
3
Dwg. PD-0xx
ABSOLUTE MAXIMUM RATINGS
Input Voltage, VI . . . . . . . . . . . . . . 30 V
Reverse Input Voltage, VRI . . . . -120 V
Output Current, IO . . . . . . . . . . . . TBD*
Operating Temperature Range,
TA . . . . . . . . . . . . -40°C to +150°C
Junction Temperature, TJ . . . . +150°C
Storage Temperature Range,
This document contains information on a product under development. Allegro
MicroSystems, Inc. reserves the right to change or discontinue this product without
notice.
TS . . . . . . . . . . . . -40°C to +170°C
* Output current rating is limited by input voltage,
duty cycle, and ambient temperature. Under
any set of conditions, do not exceed a junction
temperature of +150°C. See next page.
Always order by complete part number: A8178LLT .
8178
LOW-DROPOUT,
7.7 V PREREGULATOR
ELECTRICAL CHARACTERISTICS over operating temperature range.
Limits
Typ.
Characteristic
Symbol
Test Conditions
6.9 V ≤ VI ≤ 24 V
2.5 V ≤ VI ≤ 6.9 V
VI = 120 V, pulse test
Min.
6.5
VI - 0.4
—
Max.
8.8
—
Units
V
Output Voltage
VO
7.7
—
V
—
11
V
Output Volt. Temp. Coeff.
Line Regulation
αVO
∆VO(∆VI)
∆VO(∆IO)
IQ
—
—
TBD
TBD
TBD
2.5
5.6
130
—
mV/°C
mV
—
—
Load Regulation
—
—
mV
Quiescent Current
VI = 13.5 V, IO = 0
2.5 V ≤ VI ≤ 8 V, IO = 0
VI = 13.5 V, IO = 15 mA
A8178LLR
—
—
mA
—
—
mA
Power Dissipation
Pd
—
—
mW
°C/W
°C/W
Thermal Resistance*
RθJA
—
575
200
A8178LLT
—
—
Typical values are at TA = +25°C and are given for circuit design information only.
*Mounted on 2.24" x 2.24" solder-coated copper-clad board in still air.
INTERNAL PROTECTIVE FEATURES
ISO
Pulse No.
Test
Test Conditions (at TA = +25°C)
VS = -100 V, RS = 10 Ω, tr = 1 µs, td = 2 ms
1
2
Inductive Turn Off (Negative)
Inductive Turn Off (Positive)
Capacitive/Inductive Coupling (Neg)
Capacitive/Inductive Coupling (Pos)
Reverse Battery
VS = 100 V, RS = 10 Ω, tr = 1 µs, td = 50 µs, non-operating
VS = -150 V, RS = 50 Ω, tr = 50 ns, td = 100 ns
VS = 100 V, RS = 50 Ω, tr = 50 ns, td = 100 ns
VS = -14 V, td = 20 s, non-operating
3a
3b
4
5
Load Dump
VS = 86.5 V, RS = 0.5 Ω, tr = 5 ms, td = 400 ms
VS = -300 V, RS = 30 Ω, tr = 60 µs, td = 300 µs
6
Ignition Coil Disconnect
EXTERNAL PROTECTION REQ’D
7
Field Decay (Negative)
VS = -80 V, RS = 10 Ω, tr = 5 ms, td = 100 ms
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 1996 Allegro MicroSystems, Inc.
8178
LOW-DROPOUT,
7.7 V PREREGULATOR
A8178LLR
Dimensions in Inches
(for reference only)
0.120
0.110
0.044
0.035
0.020
0.015
0.007
0.003
0.027
3
0.055
0.047
0.1039
0.083
REF
2
1
0.024
0.018
0.040
0.035
0.080
0.070
0.004
0.0005
Dwg. MA-010 in
Dimensions in Millimeters
(controlling dimensions)
3.04
2.80
1.12
0.89
0.51
0.37
0.18
0.085
0.69
3
1.40
1.20
2.64
2.10
REF
2
1
0.60
0.45
1.03
0.89
2.05
1.78
0.10
0.013
Dwg. MA-010 mm
NOTES: 1. Lead spacing tolerance is non-cumulative.
2. Exact body and lead configuration at vendor’s option within limits shown.
8178
LOW-DROPOUT,
7.7 V PREREGULATOR
A8178LLT
Dimensions in Inches
(for reference only)
0.173
0.181
0.064
0.072
0.055
0.063
0.014
0.017
0.090
0.102
0.084
0.090
0.155
0.167
2
3
1
0.014
0.019
0.035
0.047
0.017
0.022
0.059
BSC
0.118
BSC
Dwg. MA-009-3 in
Dimensions in Millimeters
(controlling dimensions)
4.40
4.60
1.62
1.83
1.40
1.60
0.35
0.44
2.29
2.60
2.13
2.29
3.94
4.25
2
3
1
0.36
0.48
0.89
1.20
0.44
0.56
1.50
BSC
3.00
BSC
Dwg. MA-009-3 mm
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such
departures from the detail specifications as may be required to permit improvements
in the design of its products.
NOTES: 1. Lead spacing tolerance is non-cumulative.
The information included herein is believed to be accurate and reliable.
However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for
any infringements of patents or other rights of third parties which may result from its
use.
2. Exact body and lead configuration at vendor’s
option within limits shown.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
相关型号:
©2020 ICPDF网 联系我们和版权申明