A1322L [ALLEGRO]
Hall Effect Sensor, 0.2-4.7V, Rectangular, Surface Mount, LH-3;型号: | A1322L |
厂家: | ALLEGRO MICROSYSTEMS |
描述: | Hall Effect Sensor, 0.2-4.7V, Rectangular, Surface Mount, LH-3 输出元件 传感器 换能器 |
文件: | 总11页 (文件大小:763K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Preliminary
A1321 / A1322 / A1323
RATIOMETRIC, LINEAR HALL EFFECT SENSOR FOR HIGH
TEMPERATURE OPERATION
The A132X linear Hall-effect sensors are optimized, sensitive, temperature-
stable linear Hall-effect sensors with greatly improved offset characteristics.
These ratiometric Hall-effect sensors provide a voltage output that is proportional
to the applied magnetic field. The linear family has a quiescent output voltage
that is 50% of the supply voltage and output sensitivity options of nominally
2.5mV/G, 3.125mV/G, and 5mV/G. The features of this linear family are ideal for
use in linear and rotary position sensing systems in harsh environments of
automotive and industrial applications over extended temperatures to –40 °C and
+150 °C.
Each BiCMOS monolithic circuit integrates a Hall element, improved
temperature-compensating circuitry to reduce the intrinsic sensitivity drift of the
Hall element, a small-signal high-gain amplifier, and a rail-to-rail low-impedance
output stage.
UA-Package
A proprietary dynamic offset cancellation technique, with an internal high-
frequency clock reduces the residual offset voltage, which is normally caused by
device over molding, temperature dependencies, and thermal stress. The high
frequency clock allows for a greater sampling which produces higher accuracy
and faster signal processing capability, This technique produces devices that
have an extremely stable quiescent output voltage, are immune to mechanical
stress, and have precise recoverability after temperature cycling. Having the
Hall element and an amplifier on a single chip minimizes many problems
normally associated with low-level analog signals.
.
LH-Package
See Block Diagram for Pinning.
Output precision is obtained by internal gain and offset trim adjustments
made at end-of-line during the manufacturing process.
ABSOLUTE MAXIMUM RATINGS
The A132X family is provided in a 3-pin single inline package (Allegro UA
package) and a 3-pin surface mount package (Allegro LH package).
Supply Voltage ..................……..…..… 7V
Output Voltage…………………………. 7V
Reverse Supply Voltage……………… -0.1V
Reverse Output Voltage……………… -0.1V
Output Sink Current……………….…..10mA
Operating Temperature, Ta
Suffix ‘E-‘…………..... -40°C to 85°C
Suffix ‘L-‘…………... -40°C to 150°C
Storage Temperature ......................... 170°C
Maximum Junction Temperature. ……165°C
FEATURES/BENEFITS
n
n
n
n
n
n
n
n
Temperature-Stable Quiescent Output Voltage
Precise Recoverability After Temperature Cycling
Output Voltage Proportional to Magnetic Flux Density
Ratiometric Rail-to-Rail Output
Improved Sensitivity
4.5 V to 5.5 V Operation
Immune to Mechanical Stress
Solid-State Reliability
n Robust EMC protection
Some restrictions may apply to certain types of sales of the A1322 and L temperature range
for all devices. Contact factory for details.
Always order by complete part number, e.g., A1322LUA
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
A1321/A1322/A1323
RATIOMETRIC, LINEAR
HALL EFFECT SENSOR
Block Diagram – UA Package
Supply
(Pin 1)
Amp
Out
Gnd
(Pin 2)
Offset
Gain
Trim control
Output
(Pin 3)
Block Diagram – LH Package
Supply
(Pin 1)
Amp
Out
Output
(Pin 2)
Offset
Gain
Trim control
Gnd
(Pin 3)
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
A1321/A1322/A1323
RATIOMETRIC, LINEAR
HALL EFFECT SENSOR
DEVICE CHARACTERISTICS over operating temperature range and Vcc = 5 V unless otherwise
noted.
Characteristic
Symbol
Test Conditions
Limits
Min.
Typ.
Max.
Units
ELECTRICAL CHARACTERISTICS
Supply Voltage
Supply Current
Quiescent Voltage
Operating, Tj < 165°C
B = 0, IO = 0
B=0, Ta=25°C, IO = 1 mA
B = +X*, IO = -1mA
B = -X*, IO = 1mA
4.5
5.0
5.6
2.5
4.7
0.2
5.5
8
2.575
V
mA
V
V
V
Vcc_op
Icc
Voq
2.425
VOH
VOL
Output Voltage
Output Source Current Lim it
IOLM
B = -X*, V ® 0
-1.0
-1.5
mA
O
Supply Zener Clamp Voltage
Output Bandwidth
Clock Frequency
VZ
BW
FC
Icc = 15mA, Ta = 25°C, T= 2 min
7.6
30
150
V
kHz
kHz
OUTPUT CHARACTERISTICS over operating temperature range and Vcc range unless otherwsie noted.
Cbypass = 0.1uF, no load
Cbypass = 0.1uF, no load
Cbypass = 0.1uF, no load
A1323
A1322
A1321
Rout
-
-
-
1.5
20
25
40
3
mVpp
mVpp
mVpp
W
1
Noise, VN
Output Resistance
IO £ +/-1 mA
IO £ +/-1 mA, Output-Ground
kW
Output Load Resistance
Output Capacitance Load
RL
CL
4.7
Out - Gnd
10
nF
Note 1 – Typical data is at Ta – 25°C and is for design information only.
Note 2 – Negative current is defined as coming out of (sourcing) the output.
*This test requires positive and negative fields sufficient to swing the output driver between fully OFF and saturated (ON), respectively. It is NOT
intended to indicate a range of linear operation.
1
Noise specification includes digital and analog noise.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
A1321/A1322/A1323
RATIOMETRIC, LINEAR
HALL EFFECT SENSOR
MAGNETIC CHARACTERISTICS over temperature range, at Vcc = 5 V, IO = -1 mA (unless otherwise noted).
Part Numbers
A1321E/L
A1322E/L
Typ
A1323E/L
Typ
Characteristic*
Sensitivity at TA
Delta Sens at TA = max
Delta Sens at TA = min
Delta VOQ(DT)(B)
Ratiometry, DVOQ(DV)
Ratiometry, DSens
Positive Linearity, Lin+
Negative Linearity, Lin-
Min
4.75
-2.5
-6
Typ
Max
5.25
7.5
Min
2.969
-2.5
-6
Max
3.281
7.5
Min
2.375
-2.5
-6
Max
2.625
7.5
Units
mV/G
%
5
3.125
2.5
4
4
4
%
+/-10
+/- 1
+/- 1
+/- 1
+/- 1
+/-10
+/- 1
+/- 1
+/- 1
+/- 1
+/-10
+/- 1
+/- 1
+/- 1
+/- 1
G
%
%
(D V)
%
%
Symmetry
+/- 1
+/- 1
+/- 1
%
Note 1 – 10 G = 1 mT
Note 2 – Except for Delta Sens, typical data is at Ta = 25°C and is for design information only.
*See Characteristics Definitions for test conditions.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
A1321/A1322/A1323
RATIOMETRIC, LINEAR
HALL EFFECT SENSOR
CHARACTERISTIC DEFINITIONS
Quiescent Voltage Output. In the quiescent state (no
magnetic field), the output equals one half of the supply
voltage over the operating voltage and temperature
range. Due to internal component tolerances and
thermal considerations, there is a tolerance on the
quiescent voltage output and on the quiescent voltage
output as a function of supply voltage and ambient
temperature. For purposes of specification, the
quiescent voltage output as a function of temperature is
defined in magnetic flux density units (B) as
VOQ(Vcc) /VOQ(5V )
VCC /5V
DVOQ(DV)
=
´ 100%
(4)
and the percent ratiometric change in sensitivity is
defined as
Sens(Vcc) / Sens(5V)
DSens(DV )
=
´ 100% (5)
VCC / 5V
(VOQ(T ) - VOQ(25°C )
)
Linearity and Symmetry. The on-chip output stage is
designed to provide a linear output with a supply voltage
of 5 V. Although application of very high magnetic fields
will not damage these devices, it will force the output
into a non-linear region. Linearity in percent is
measured and defined as
A
DVOQ(DT)(B) =
(1)
Sens(25°C)
This calculation yields the device’s equivalent accuracy,
over the operating temperature range, in gauss.
Sensitivity. The presence of a south-pole magnetic
field perpendicular to the package face (the branded
surface) will increase the output voltage from its
quiescent value toward the supply voltage rail by an
amount proportional to the magnetic field applied.
Conversely, the application of a north pole will decrease
the output voltage from its quiescent value. This
proportionality is specified as the sensitivity of the device
and is defined as
VO( B) - VOQ
Lin+ =
Lin- =
´ 100%
(6)
(7)
2(VO(B / 2) - VOQ )
VO(- B) - VOQ
´ 100%
2(VO(- B/ 2) - VOQ )
and output symmetry as
VO(- B) - VO(+B)
VO(B) - VOQ
Sym =
Sens =
(2)
´ 100%
(8)
2B
(VOQ - VO(- B)
)
The stability of sensitivity as a function of temperature is
defined as
Sens(TA) - Sens(25°C )
DSens(DT )
=
´ 100%
(3)
Sens(25°C )
Ratiometric. The A132X family features a ratiometric
output. The quiescent voltage output and sensitivity are
proportional to the supply voltage (ratiometric).
The percent ratiometric change in the quiescent voltage
output is defined as
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
A1321/A1322/A1323
RATIOMETRIC, LINEAR
HALL EFFECT SENSOR
TYPICAL CHARATERISTICS
(Intentionally Left Blank)
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
A1321/A1322/A1323
RATIOMETRIC, LINEAR
HALL EFFECT SENSOR
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
A1321/A1322/A1323
RATIOMETRIC, LINEAR
HALL EFFECT SENSOR
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
A1321/A1322/A1323
RATIOMETRIC, LINEAR
HALL EFFECT SENSOR
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
A1321/A1322/A1323
RATIOMETRIC, LINEAR
HALL EFFECT SENSOR
The products described herein are manufactured under one or more
of the following U.S.patents:4,761,569;5,619,137;5,621,319.In
addition,a patent is pending for Allegro's magnetic pole-independent
feature.Allegro has several foreign counterpart patents as well.
Allegro has not licensed any of these patents to any third party.
Allegro MicroSystems,Inc.reserves the right to make,from time to
time,such departures from the detail specifications as may be required
to permit improvements in the performance,reliability,or
manufacturability of its products.Before placing an order,the user is
cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components
in life-support appliances,devices,or systems without express written
approval.
The information included herein is believed to be accurate and
reliable.However,Allegro MicroSystems,Inc.assumes no responsibil-
ity for its use;nor for any infringements of patents or other rights of
third parties that may result from its use.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2003 Allegro MicroSystems, Inc.
Rev. 1.6 28Aug03 CMG
相关型号:
A1322LUA-TL
Hall Effect Sensor, 10mT Max, 0.20-4.70V, Rectangular, Through Hole Mount, SIP-3
ALLEGRO
©2020 ICPDF网 联系我们和版权申明