AM2LW-2405S-NZ [AIMTEC]
1.5 Watt | DC-DC Converter; 1.5瓦| DC- DC转换器型号: | AM2LW-2405S-NZ |
厂家: | AIMTEC |
描述: | 1.5 Watt | DC-DC Converter |
文件: | 总3页 (文件大小:148K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series AM2LW-NZ
1.5 Watt | DC-DC Converter
FEATURES:
•
•
•
•
SMD package
Ultra Wide (4:1) input range
1500VDC isolation
•
•
•
•
Operating temperature: -40°C to +85°C
Regulated single/dual output
MTBF>1,000,000 hours
Continuous short circuit protection
RoHS compliant
Models: Single output
Input Voltage
(V)
Output Voltage
Output Current
Isolation
(VDC)
1500
Efficiency
Model
(V)
3.3
5
max (mA)
455
(%)
72
76
78
79
80
72
76
78
79
80
AM2LW-2403S-NZ
AM2LW-2405S-NZ
AM2LW-2409S-NZ
AM2LW-2412S-NZ
AM2LW-2415S-NZ
AM2LW-4803S-NZ
AM2LW-4805S-NZ
AM2LW-4809S-NZ
AM2LW-4812S-NZ
AM2LW-4815S-NZ
9-36
9-36
9-36
9-36
300
167
125
100
455
300
167
125
1500
1500
1500
1500
1500
1500
1500
1500
9
12
15
3.3
5
9
12
15
9-36
18-72
18-72
18-72
18-72
18-72
100
1500
Models: Dual output
Input Voltage
(V)
Output Voltage
Output Current
Isolation
(VDC)
1500
Efficiency
Model
(V)
±5
±12
±15
±5
max (mA)
±150
±63
(%)
74
77
75
74
76
76
AM2LW-2405D-NZ
AM2LW-2412D-NZ
AM2LW-2415D-NZ
AM2LW-4805D-NZ
AM2LW-4812D-NZ
AM2LW-4815D-NZ
9-36
9-36
9-36
18-72
18-72
18-72
1500
1500
1500
1500
±50
±150
±63
±12
±15
±50
1500
NOTE 1: Add suffix “TR” to a part number when ordering in tape and reel package
NOTE 2: Unless otherwise specified, all specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load.
Input Specifications
Parameters
Nominal
Typical
9-36
18-72
Maximum
Units
24
48
24
48
Voltage range
VDC
40
80
100
Absolute Maximum Rating
Peak Input Voltage time
VDC
ms
Isolation Specifications
Parameters
Tested I/O voltage
Resistance
Conditions
60 sec
At 500 Vdc
Input to Output
Typical
Rated
1500
Units
VDC
MOhm
pF
1000
1000
Capacitance
Output Specifications
Parameters
Voltage accuracy
Conditions
Typical
±5
Maximum
Units
%
Short Circuit protection
Short circuit restart
Line voltage regulation
Continuous
Auto-Recovery
±0.75
From Low in to High In
%
www.aimtec.com
F 051e R8.B
Tel: +1 514 620 2722
1 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM2LW-NZ
1.5 Watt | DC-DC Converter
Output Specifications (continued)
Parameters
Conditions
Typical
Maximum
Units
Load voltage regulation (Single)
From 10% to 100% load
From 10% to 100% load
Unbalanced load
±1.5
%
Load voltage regulation (Dual)
±5
%
%/oC
mV p-p
% of Max
Temperature coefficient
Ripple & Noise
Minimum Load Current*
±0.03
100
10
20MHz Bandwidth
* Operation under 10% load will not damage the converter; however, not all specifications will be met.
General Specifications
Parameters
Conditions
100% load
Typical
550
-40 to +85
-55 to +125
Maximum
Units
KHz
oC
Switching frequency
Operating temperature
Storage temperature
Maximum case temperature
Derating
Cooling
Humidity
oC
100
95
oC
Above 71º
2.9
%/ oC
Free Air Convection
% RH
g
Case material
Weight
Plastic (UL94-V0)
5.2
Dimensions (L x W x H)
0.94 x 0.54 x 0.32 inches 23.86 x 13.70 x 8.00 mm
MTBF
>1,000,000 hours (MIL-HDBK -217F, Ground Benign, t=+25ºC)
Maximum Soldering Temperature
1.5mm from case for 10 seconds
300
oC
.
Pin Out Specifications
Pin
1
Single
- Vin
Dual
- Vin
7
NC
NC
8
9
10
16
NC
Common
+Vout
-Vout
+ Vin
+Vout
- Vout
+ Vin
NC – not connected
Dimensions
Front View
Side View
23.86
(0.94)
15.00
(0.59)
A
A
7.50
(0.30)
8.20
(0.32)
0.50
(0.02)
0.50
(0.02)
5.00º angle
13.10
(0.52)
1.36
17.50
(0.69)
(0.05) MAX
Top View
23.86
(0.94)
0.80
(0.03) Footprint
1.02
(0.04)
0.50
(0.02)
16
10
9
13.70
(0.54)
18.50
(0.73)
1
8
7
0.20
(0.08)
15.24
(0.60)
3.04
(0.12)
15.24
(0.60)
2.54
(0.10)
2.54
(0.10)
www.aimtec.com
F 051e R8.B
Tel: +1 514 620 2722
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM2LW-NZ
1.5 Watt | DC-DC Converter
Recommended Filter Circuit
Single Output
Dual Output
+Vout
- Vout
+ Vin
Cin
+Vout
+ Vin
Cin
Cout
Cout
+
+
+
+
Cout
+
Common
-Vout
DC
DC
DC
DC
- Vin
- Vin
All the AM2LW-Z Series have been tested with the above recommended test circuit. This series should be tested under load.
If it is necessary to further decrease the input/output ripple, the value of the filter capacitor can be increased; a capacitor with a low ESR
should be used. Excessive filter capacitance can cause start up problems with the converter.
In general, the recommended capacitance values are:
Cin: 10μF~47μF
Cout: 10μF/100mA
Refer to table below for maximum capacitor values:
External Capacitor Value
Single Output
Vout (VDC)
Dual Output
Vout (VDC)
Cout (uF)
Cout (uF)
5
12
15
1000
470
330
±5
±12
±15
±680
±330
±220
Derating
Free Air Convection
º
C
71
100
80
Safe Operating Area
60
40
20
0
85
100
- 40 - 20
0
20
40
60
80
º C
Ambient Temperature
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R8.B
Tel: +1 514 620 2722
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
相关型号:
AM2LW-2405S-NZTR
DC/DC Converter; Product Weight (grams): 5.2; Input voltage min (V): 9; Input voltage max (V): 36; Output voltage min: 5; Output voltage max: 5; Output voltage dual assymetric (y/n): Single; Output Power (W): 1.5; Max Output current (A): 0.3; Efficiency (%): 76; Package type: SMD; Mounting: PCB; W (in): 0.54; L (in): 0.94; H (in): 0.32; W (mm): 13.7; L (mm): 23.86; H (mm): 8; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1500; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; Application 5 (Industrial): 1; MT
AIMTEC
AM2LW-2409S-NZTR
DC/DC Converter; Product Weight (grams): 5.2; Input voltage min (V): 9; Input voltage max (V): 36; Output voltage min: 9; Output voltage max: 9; Output voltage dual assymetric (y/n): Single; Output Power (W): 1.5; Max Output current (A): 0.167; Efficiency (%): 78; Package type: SMD; Mounting: PCB; W (in): 0.54; L (in): 0.94; H (in): 0.32; W (mm): 13.7; L (mm): 23.86; H (mm): 8; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1500; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; Application 5 (Industrial): 1;
AIMTEC
AM2LW-2412D-NZTR
DC/DC Converter; Product Weight (grams): 5.2; Input voltage min (V): 9; Input voltage max (V): 36; Output voltage min: 12; Output voltage max: 12; Output voltage dual assymetric (y/n): Dual; Output Power (W): 1.5; Max Output current (A): ±0.063; Efficiency (%): 77; Package type: SMD; Mounting: PCB; W (in): 0.54; L (in): 0.94; H (in): 0.32; W (mm): 13.7; L (mm): 23.86; H (mm): 8; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1500; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; Application 5 (Industrial): 1;
AIMTEC
AM2LW-2412S-NZTR
DC/DC Converter; Product Weight (grams): 5.2; Input voltage min (V): 9; Input voltage max (V): 36; Output voltage min: 12; Output voltage max: 12; Output voltage dual assymetric (y/n): Single; Output Power (W): 1.5; Max Output current (A): 0.125; Efficiency (%): 79; Package type: SMD; Mounting: PCB; W (in): 0.54; L (in): 0.94; H (in): 0.32; W (mm): 13.7; L (mm): 23.86; H (mm): 8; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1500; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; Application 5 (Industrial): 1
AIMTEC
AM2LW-2415D-NZTR
DC/DC Converter; Product Weight (grams): 5.2; Input voltage min (V): 9; Input voltage max (V): 36; Output voltage min: 15; Output voltage max: 15; Output voltage dual assymetric (y/n): Dual; Output Power (W): 1.5; Max Output current (A): ±0.050; Efficiency (%): 75; Package type: SMD; Mounting: PCB; W (in): 0.54; L (in): 0.94; H (in): 0.32; W (mm): 13.7; L (mm): 23.86; H (mm): 8; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1500; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; Application 5 (Industrial): 1;
AIMTEC
AM2LW-2415S-NZTR
DC/DC Converter; Product Weight (grams): 5.2; Input voltage min (V): 9; Input voltage max (V): 36; Output voltage min: 15; Output voltage max: 15; Output voltage dual assymetric (y/n): Single; Output Power (W): 1.5; Max Output current (A): 0.1; Efficiency (%): 80; Package type: SMD; Mounting: PCB; W (in): 0.54; L (in): 0.94; H (in): 0.32; W (mm): 13.7; L (mm): 23.86; H (mm): 8; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1500; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; Application 5 (Industrial): 1;
AIMTEC
©2020 ICPDF网 联系我们和版权申明