AM1P-1205S-NZ [AIMTEC]
1 Watt | DC-DC Converter; 1瓦| DC-DC转换器型号: | AM1P-1205S-NZ |
厂家: | AIMTEC |
描述: | 1 Watt | DC-DC Converter |
文件: | 总3页 (文件大小:261K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series AM1P-NZ
1 Watt | DC-DC Converter
FEATURES:
• RoHS compliant
•
•
•
Operating temperature -40oC to + 85oC
Input / Output isolation 1000 VDC
• 8 Pin DIP Package
• Low ripple and noise
• High efficiency up to 81%
Pin computable with multiple manufacturers
• UL94-VO Package
Models
Single output
Input Voltage
(V)
4.5-5.5
4.5-5.5
4.5-5.5
Output Voltage
Output Current
Isolation
(VDC)
1000
Efficiency
Model
(V)
5
9
12
15
5
max (mA)
200
110
83
(%)
78
79
80
78
78
80
81
79
79
80
81
79
AM1P-0505S-NZ
AM1P-0509S-NZ
AM1P-0512S-NZ
AM1P-0515S-NZ
AM1P-1205S-NZ
AM1P-1209S-NZ
AM1P-1212S-NZ
AM1P-1215S-NZ
AM1P-2405S-NZ
AM1P-2409S-NZ
AM1P-2412S-NZ
AM1P-2415S-NZ
1000
1000
1000
1000
1000
1000
1000
1000
4.5-5.5
67
10.8-13.2
10.8-13.2
10.8-13.2
10.8-13.2
21.6-26.4
21.6-26.4
21.6-26.4
21.6-26.4
200
110
83
9
12
15
5
9
12
15
67
200
110
83
1000
1000
1000
67
Models
Dual separated output
Input Voltage
(V)
Output Voltage
Output Current
max (mA)
100 / 100
Isolation
(VDC)
1000
Efficiency
Model
(V)
5 / 5
(%)
72
AM1P-050505D-NZ
4.5-5.5
Input Specifications
Parameters
Nominal
Typical
4.5-5.5
Maximum
Units
5
Voltage range
Filter
12
24
10.8-13.2
21.6-26.4
VDC
Capacitor
Isolation Specifications
Parameters
Tested I/O voltage
Resistance
Conditions
Typical
Rated
1000
Units
VDC
MOhm
pF
60 sec
> 1000
60
Capacitance
Output Specifications
Parameters
Conditions
Typical
Maximum
Units
Voltage accuracy
See tolerance graph
Short Circuit protection
Line voltage regulation (Single)
Line voltage regulation (Dual)
Load voltage regulation (Single)
Load voltage regulation (Dual)
Temperature coefficient
Ripple & Noise
Momentary (1 sec)
For 1.0% Vin
For 1.0% Vin
Load 10 – 100%
Load 10 – 100%
±1.2
±1.2
10
10
±0.03
75
% of Vin
% of Vin
%
%
%/oC
m Vp-p
At 20 MHz Bandwidth
www.aimtec.com
F 051e R11.E
Tel: +1 514 620 2722
1 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM1P-NZ
1 Watt | DC-DC Converter
General Specifications
Parameters
Switching frequency
Operating temperature
Storage temperature
Case temperature
Cooling
Humidity
Case material
Weight
Conditions
100% load
Without derating
Typical
150
Maximum
Units
KHz
oC
-40 to +85
-55 to +125
oC
oC
90
90
Free air convection
Plastic UL94-VO
%
g
1.8
Dimensions (L x W x H)
MTBF
0.46 x 0.39 x 0.30 inches
11.70 x 9.80 x 7.70 mm
>1 000 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input
voltage and at rated output load unless otherwise specified.
Safety Specifications
Parameters
Agency approvals UL, CE for single output models
Standards
IEC60950-1 :2001
Pin Out Specifications
External capacitor
External
capacitor
(VDC)
(uF)
External
capacitor
Dual
Separated
-V Input
Vin
Vout
(VDC)
Pin
Single
- V Input
+V Input
+V Output
No pin
(uF)
10
4.7
2.2
1
1
5
12
24
-
4.7
2.2
1
5
9
12
15
4
5
6
7
8
+V Input
+V1 Output
-V1 Output
+V2 Output
-V2 Output
-
-V Output
No pin
Tolerance Envelope Graph
+10%
+5%
Typical load line
Nominal
Voltage
10%
50%
100%
Output Current (%)
www.aimtec.com
F 051e R11.E
Tel: +1 514 620 2722
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM1P-NZ
1 Watt | DC-DC Converter
Dimensions
Filtering
7.62
(0.30)
11.70
(0.46)
0.50
(0.02)
1
8
4
5
7.62
(0.30)
9.80
(0.39)
Bottom View
7
6
2.54
(0.10)
7.70
(0.30)
4.10
(0.16)
0.50
(0.02)
2.54
(0.10)
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R11.E
Tel: +1 514 620 2722
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
相关型号:
©2020 ICPDF网 联系我们和版权申明