HLMP-C610-R0000 [AGILENT]

Single Color LED, Red, Clear Nondiffused, T-1 3/4, 5mm, PLASTIC PACKAGE-2;


型号：	HLMP-C610-R0000
厂家：	AGILENT TECHNOLOGIES, LTD.
描述：	Single Color LED, Red, Clear Nondiffused, T-1 3/4, 5mm, PLASTIC PACKAGE-2 光电
文件：	总8页 (文件大小：273K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Agilent T-1 / (5 mm) AlInGaP Lamps

Data Sheet

Features

• High intensity

• General purpose leads

• Popular 5 mm diameter

• Available in bulk, tape and reel, or

ammopack

• 8° or 25° viewing angles

HLMP-Cx08 Series, HLMP-Cx25 Series

HLMP-Cx27 Series, HLMP-C610

• Choice of colors: Amber or Red

Description

Built using AlInGaP technology,

they are well suited for typical

5 mm TS-AlGaAs lamp applica-

tions, and have significantly

SUPERIOR RELIABILITY than

most TS-AlGaAs lamps in wet/

hot environments. These lamps

come with clear non-diffused

lens and are optically designed

to yield superior light output.

Applications

The HLMP-Cx08, HLMP-Cx25,

HLMP-Cx27, and HLMP-C610

series are 5 mm lamps specially

designed for applications requir-

ing very high on-axis intensity

that is not achievable with a

standard lamp. These devices

are capable of producing light

output over a wide range of

drive currents.

• Indoor/ outdoor applications

• Small store-front signs

• Message panels

• Road construction barrier lights

• Center high mount stop lights

• Spoiler, car decorative lighting

• Motorcycle/ bicycle warning lights

Device Selection

Typical Viewing

Luminous Intensity,

Iv (mcd) @ 20 mA

[1]

Angle (degrees),

Dominant

Wavelength

[2]

Part Number

Standoff

2Q /

Min.

Typ.

Color

Red

HLMP-C008-U00xx

HLMP-C208-S00xx

HLMP-C608-R00xx

HLMP-C610-R00xx

HLMP-C025-P00xx

HLMP-C225-O00xx

HLMP-C625-P00xx

HLMP-C027-P00xx

HLMP-C627-P00xx

2900.0

2600.0

1000.0

500.0

450.0

500.0

6000.0

3000.0

2000.0

1000.0

800.0

626

Amber

Red

590

635

Yes

Red

635

Red

626

Amber

Red

590

700.0

635

Yes

1000.0

700.0

Red

626

Red

635

Notes:

1. q / is the off-axis angle at which the luminous intensity is half of the axial luminous intensity.

2. The dominant wavelength, l , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the

device.

Package Dimensions

HLMP-Cx27

1.07 (0.042)

0.56 (0.022)

6.10 (0.240)

5.46 (0.215)

1.00 (0.040) MAX. EPOXY MENISCUS

1.32 (0.052)

1.02 (0.040)

0.45

(0.018)

SQ. NOM.

5.21 (0.205)

4.70 (0.105)

2.54

CATHODE

LEAD

NOM.

(0.100)

9.14 (0.360)

8.36 (0.330)

1.27

(0.050)

NOM.

13.50 (0.53)

13.30 (0.52)

25.40

MIN.

(1.000)

HLMP-Cx25

HLMP-C610

HLMP-Cx08

1.07 (0.042)

0.56 (0.022)

6.10 (0.240)

5.46 (0.215)

1.00 (0.040) MAX. EPOXY MENISCUS

0.45

(0.018)

1.02 (0.004)

MAX. TYP.

SQ. NOM.

5.21 (0.205)

4.70 (0.105)

2.54

CATHODE

LEAD

NOM.

(0.100)

9.14 (0.360)

8.36 (0.330)

1.27

(0.050)

NOM.

25.40

MIN.

(1.000)

0.89 (0.035)

0.64 (0.023)

6.10 (0.240)

5.46 (0.215)

1.00 (0.040) MAX. EPOXY MENISCUS

0.45

(0.018)

1.32 (0.052)

1.02 (0.040)

SQ. NOM.

5.08 (0.200)

4.57 (0.100)

2.54

CATHODE

LEAD

NOM.

(0.100)

9.19 (0.362)

8.43 (0.332)

1.27

(0.050)

NOM.

13.55 (0.533)

13.35 (0.525)

25.40

MIN.

(1.00)

0.89 (0.035)

0.64 (0.023)

6.10 (0.240)

5.46 (0.215)

1.00 (0.040) MAX. EPOXY MENISCUS

0.45

(0.018)

1.02 (0.004)

MAX. TYP.

SQ. NOM.

5.08 (0.200)

4.57 (0.100)

2.54

CATHODE

LEAD

NOM.

(0.100)

9.19 (0.362)

8.43 (0.332)

1.27

NOM.

(0.050)

25.40

MIN.

(1.00)

Part Numbering System

HLMP - C x xx - x x x xx

Mechanical Option

00: Bulk

02: Tape & Reel, Straight Leads

DD: Ammo Pack

Color Bin Options

0: Full Color Bin Distribution

Maximum Iv Bin Options

0: Open (no max. limit)

Minimum Iv Bin Options

Please refer to the Iv Bin Table

Viewing Angle & Standoff Option

08: 8 degrees, without standoff

10: 8 degrees, with standoff

25: 25 degrees, without standoff

27: 25 degrees, with standoff

Color Options

0: AlInGaP Red 626 nm

2: AlInGaP Amber 590 nm

6: AlInGaP Red 635 nm

Absolute Maximum Ratings at T =25°C

Parameter

Absolute Maximum

Units

Peak Forward Current

[1]

Average Forward Current

[2]

DC Current

Reverse Voltage (I = 100 µA)

LED Junction Temperature

Operating Temperature

Storage Temperature

110

°C

-40 to +100

-40 to +120

°C

Wave Soldering Temperature

[1.59 mm (0.063 in.) from Body]

Solder Dipping Temperature

[1.59 mm (0.063 in.) from Body]

250°C for 3 seconds

260°C for 5 seconds

Notes:

1. See Figure 2 to establish pulsed operating conditions.

2. Derate linearly from 50°C at 0.5 mA/ °C.

3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging

the LED die and wirebond. It is not recommended that this device be operated at peak currents above the Absolute Maximum

Peak Forward Current.

Optical/ Electrical Characteristics at T =25°C

Test

Conditions

[3]

Symbol

Parameter

Device

Min. Typ.

Max.

Units

2q /

Included Angle Between Half HLMP-C008

Luminous Intensity Points

Deg.

I = 20 mA

[1]

HLMP-C208

HLMP-C608

HLMP-C025

HLMP-C225

HLMP-C625

HLMP-C610

HLMP-C027

HLMP-C627

HLMP-C008

HLMP-C208

HLMP-C608

HLMP-C025

HLMP-C225

HLMP-C625

HLMP-C610

HLMP-C027

HLMP-C627

HLMP-C008

HLMP-C208

HLMP-C608

HLMP-C025

HLMP-C225

HLMP-C625

HLMP-C610

HLMP-C027

HLMP-C627

See Note 1

[2]

Dominant Wavelength

626

590

635

626

590

635

626

635

594

650

635

594

650

635

650

See Note 2

Peak Wavelength

Measurement at Peak

PEAK

Dl /

Spectral Line Halfwidth

Speed of Response

Capacitance

V = 0; f = 1 MHz

Thermal Resistance

Forward Voltage

260

1.9

5.0

°C/ W Junction to Cathode Lead

V I = 20 mA

J-PIN

HLMP-C008

HLMP-C208

HLMP-C608

HLMP-C025

HLMP-C225

HLMP-C625

HLMP-C610

HLMP-C027

HLMP-C627

2.4

2.6

2.2

2.4

2.6

2.2

2.4

2.2

Reverse Breakdown Voltage

I = 100 µA

Notes:

1. q / is the off-axis angle at which the luminous intensity is half of the axial luminous intensity.

2. The dominant wavelength, l , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the

device.

3. Typical specification for reference only. Do not exceed absolute maximum ratings.

1.0

C008

C025

C027

C208

C225

C608

C625

C627

C610

0.5

550

600

650

700

WAVELENGTH – nm

Figure 1. Relative intensity vs. wavelength.

RED

AMBER

300 Hz

100 Hz

1.0

100

1000

10,000

1.5

2.0

2.5

3.0

– FORWARD VOLTAGE – V

– PULSE DURATION – µs

Figure 2. Maximum tolerable peak current vs.

pulse duration.

Figure 3. Forward current vs. forward voltage.

3.0

2.5

2.0

1.5

1.0

Rθ

= 780°C/W

J-A

0.5

100 120

– DC FORWARD CURRENT – mA

AMBIENT TEMPERATURE (°C)

Figure 4. Relative luminous intensity vs.

forward current.

Figure 5. Maximum forward DC current vs.

ambient temperature.

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

-25

-20

-15

-10

-5

ANGULAR DISPLACEMENT – DEGREES

Figure 6. Relative luminous intensity vs. angular displacement for HLMP-Cx08 and HLMP-Cx10.

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

-90 -80 -70 -60 -50 -40 -30 -20 -10

10 20 30 40 50 60 70 80 90

ANGULAR DISPLACEMENT – DEGREES

Figure 7. Relative luminous intensity vs. angular displacement for HLMP-Cx25 and HLMP-Cx27.

Soldering/ Cleaning

Cleaning agents from the ketone

family (acetone, methyl ethyl

ketone, etc.) and from the

chlorinated hydrocarbon family

(methylene chloride, trichloro-

ethylene, carbon tetrachloride,

etc.) are not recommended for

cleaning LED parts. All of these

various solvents attack or

dissolve the encapsulating

epoxies used to form the

package of plastic LED parts.

For information on soldering

LEDs, please refer to Applica-

tion Note 1027.

Intensity Bin Limits

Intensity Range (mcd)

Color

Bin

Min.

Max.

540.0

850.0

1200.0

1700.0

2400.0

3400.0

4900.0

7100.0

10200.0

14800.0

21400.0

30900.0

800.0

1200.0

1700.0

2400.0

3400.0

4900.0

7100.0

10200.0

14800.0

21400.0

510.0

Red

800.0

1250.0

1800.0

2900.0

4700.0

7200.0

11700.0

18000.0

27000.0

1250.0

1800.0

2900.0

4700.0

7200.0

11700.0

18000.0

Yellow

Maximum tolerance for each bin limit is ±18%.

Color Categories

Lambda (nm)

Color

Category #

Min.

Max.

587.0

589.5

592.0

594.5

597.0

584.5

587.0

589.5

592.0

594.5

Amber

Tolerance for each bin limit is ±0.5 nm.

Mechanical Option Matrix

Mechanical

Option Code

Definition

Bulk Packaging, minimum increment 500 pcs/ bag

Tape & Reel, straight leads, minimum increment 1300 pcs/ bag

Ammo Pack, straight leads with minimum increment 2K/ pack

Note:

All categories are established for classification of products. Products may not be available in all

categories. Please contact your local Agilent representative for further clarification/ information.

www.agilent.com/ semiconductors

For product information and a complete list of

distributors, please go to our web site.

For technical assistance call:

Americas/ Canada: +1 (800) 235-0312 or

(916) 788-6763

Europe: +49 (0) 6441 92460

China: 10800 650 0017

Hong Kong: (+65) 6756 2394

India, Australia, New Zealand: (+65) 6755 1939

Japan: (+81 3) 3335-8152(Domestic/ Interna-

tional), or 0120-61-1280(Domestic Only)

Korea: (+65) 6755 1989

Singapore, Malaysia, Vietnam, Thailand,

Philippines, Indonesia: (+65) 6755 2044

Taiwan: (+65) 6755 1843

Data subject to change.

Obsoletes 5988-9482EN

June 6, 2005

5989-3262EN

相关型号：