HDSP-316Y-MI300 [AGILENT]
10 mm and 13 mm Slim Font Seven Segment Displays; 10毫米和13毫米的纤薄字体七段显示型号: | HDSP-316Y-MI300 |
厂家: | AGILENT TECHNOLOGIES, LTD. |
描述: | 10 mm and 13 mm Slim Font Seven Segment Displays |
文件: | 总10页 (文件大小:88K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
10 mm and 13 mm Slim Font
Seven Segment Displays
Technical Data
HDSP-315x Series
HDSP-316x Series
HDSP-515x Series
HDSP-516x Series
Features
• Excellent Appearance
• Slim Font Design
• Mitered Corners, Evenly
Illuminated Segments
• Gray Face for Optimum
On/Off Contrast
• Choice of Colors: DH AlGaAs
Red, High Efficiency Red
Description
The HDSP-31xx-51xx Series of
displays incorporates a new slim
font character design. This slim
font features narrow width,
specially mitered segments to give
a fuller appearance to the
illuminated character. Faces of
these displays are painted a
neutral gray for enhanced on/off
contrast.
(HER), Yellow, and Green
• Low Current Available,
AlGaAs Red and HER Choice
of Character Size: 10 mm
and 13 mm
• ± 50°Viewing Angle
• Characterized for Luminous
Intensity
All devices are available in either
common anode or common
cathode configuration with right
hand decimal point. Low current
versions are available in either
AlGaAs red or HER.
Devices
AlGaAs
Red Low
Current
HDSP-
HER
Std.
Current
HDSP-
HER
Low
Current
HDSP-
Yellow
Std.
Current
HDSP-
Green
Std.
Current
HDSP-
Package
Drawing
Description
315H
316H
515H
516H
315E
316E
515E
516E
315L
316L
515L
516L
315Y
316Y
515Y
516Y
315G
316G
515G
516G
Common Anode,
10 mm Display
A
Common Cathode,
10 mm Display
B
A
B
Common Anode,
13 mm Display
Common Cathode,
13 mm Display
2
Part Numbering System
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
H: AlGaAs Red
E: High Efficiency Red
G: Green
Y: Yellow
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
Refer to Respective Datasheet
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact
your nearest Agilent representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are
typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective
datasheet for specific bin limit information.
3
HDSP-315x/316x Series
LUMINOUS
INTENSITY
CATEGORY
COLOR BIN (NOTE 3)
2.54 ± 0.38
6
10°
0.9
a
1
2
3
4
5
10
9
f
b
g
12.8
± 0.2
8
10
4 x 2.54
e
c
7
d
DP
6
0.53
DIA. 1.2
PIN FUNCTION
± 0.05
6.4
9.7 ± 0.1
± 0.1
1
2
3
4
5
6
7
8
9
10
g
f
DATE
CODE
7
Common A/C
e
d
DP
± 0.1
10.4 MIN.
c
Common A/C
b
a
0.3 ± 0.05
7.62
± 0.38
HDSP-515x/516x Series
LUMINOUS
INTENSITY
CATEGORY
7.40
COLOR BIN (NOTE 3)
10°
10 9
8 7 6
1.25
a
f
b
DATE
CODE
+ 0.3
– 0.1
g
17.50
15.24 ± 0.3
13.0
e
c
d
DP
0.29 ± 0.08 TYP.
1
2 3 4
5
DIA. 1.25
5.08
12.25 ± 0.15
PIN FUNCTION
6.40
± 0.1
1
2
3
4
5
6
7
8
9
10
e
d
Common A/C
c
DP
b
7.00
± 0.1
3.60 ± 0.3
a
Common A/C
f
g
1.04 ± 0.3 TYP.
2.54 ± 0.3 TYP.
0.58 ± 0.08
NOTES: 1. PACKAGE DIMENSIONS IN MILLIMETERS.
2. UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. FOR YELLOW AND GREEN DEVICES ONLY.
4
Absolute Maximum Ratings
AlGaAs
Red Low
HER
Low
Description
Current
HER
Current
Yellow
Green
Units
Average Power per
Segment or DP
37
105
52
45
80
105
mW
Peak Forward
Current per Segment
or DP
45
90[2]
30[3]
60[5]
20[6]
90[7]
30[8]
mA
DC Forward Current
per Segment or DP
15[1]
15[4]
mA
°C
°C
V
Operating Tempera-
ture Range
-20 to 100
-40 to +100
Storage Temperature
Range
-40 to +100
3.0
Reverse Voltage per
Segment or DP
Wavesoldering
Temperature for
3 seconds 1.59 mm.
below body
250
°C
Notes:
1. Derate above 91°C at 0.53 mA/°C.
2. See Figure 4 to establish pulsed conditions.
3. Derate above 53°C at 0.45 mA/°C.
4. Derate above 80°C at 0.38 mA/°C.
5. See Figure 5 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 6 to establish pulsed ocnditions.
8. Derate above 39°C at 0.37 mA/°C.
5
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red Low Current
Device
Series
Test
HDSP-
Parameter
Symbol Min. Typ. Max.
Units
Conditions
315/316H Luminous Intensity/Segment[1,2]
515/516H (Digit Average)
IV
180
650
µcd
IF = 1 mA
IF = 1 mA
Forward Voltage/Segment or DP
VF
λPEAK
λd
1.8
645
637
15
2.2
V
nm
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
nm
VR
3
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
255
°C/W/Seg
HER
Device
Series
Test
HDSP-
Parameter
Symbol Min. Typ. Max.
Units
Conditions
315/316E Luminous Intensity/Segment[1,2]
515/516E (Digit Average)
IV
450 2600
µcd
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
VF
λPEAK
λd
1.9
635
626
2.5
V
nm
nm
Reverse Voltage/Segment or DP[4]
VR
3
30
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
HER Low Current
Device
Series
Test
HDSP-
Parameter
Symbol Min. Typ. Max.
Units
Conditions
315/316L Luminous Intensity/Segment[1,2]
515/516L (Digit Average)
IV
180
370
µcd
IF = 2 mA
IF = 2 mA
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
VF
λPEAK
λd
2.1
635
626
30
2.5
V
nm
nm
Reverse Voltage/Segment or DP[4]
VR
3
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
6
Yellow
Device
Series
HDSP-
Test
Conditions
Parameter
Symbol Min. Typ. Max.
Units
315/316Y Luminous Intensity/Segment[1,2]
515/516Y (Digit Average)
IV
450 1800
µcd
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
VF
λPEAK
λd
2.0
583
586
2.5
V
nm
nm
Reverse Voltage/Segment or DP[4]
VR
3
50
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
Green
Device
Series
Test
HDSP-
Parameter
Symbol Min. Typ. Max.
Units
Conditions
315/316E Luminous Intensity/Segment[1,2]
515/516E (Digit Average)
IV
450 5000
µcd
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
VF
λPEAK
λd
2.1
566
571
2.5
V
nm
nm
Reverse Voltage/Segment or DP[4]
VR
3
50
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λ is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the
device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
AlGaAs Low Current
20
50.0
20.0
20
10
18
16
R
= 770°C/W
θ
J-A
10.0
5.0
5
14
12
10
8
2
1
2.0
1.0
0.5
6
0.5
4
0.2
0.1
2
0
0.1
0
0.5
1.0
1.5
2.0
2.5
0.1 0.2
0.5
1
2
5
10 20
20 30 40 50 60 70 80 90 100 110 120
V
– FORWARD VOLTAGE – V
I
– FORWARD CURRENT
PER SEGMENT – mA
F
T
– AMBIENT TEMPERATURE – °C
F
A
Figure 1. Maximum Allowable Average
or DC Current vs. Ambient
Temperature.
Figure 2. Forward Current vs.
Forward Voltage.
Figure 3. Relative Luminous Intensity
vs DC Forward Current.
7
HER, Yellow, and Green
100
100
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF I
DC
MAXIMUM
DERATING OF I
MAXIMUM
DC
10
10
3
KHz
1
DC OPERATION
1
DC OPERATION
1
10
100
1000
10000
1
10
100
1000
10000
t
– PULSE DURATION – µs
t
– PULSE DURATION – µs
p
p
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration – Yellow.
Figure 4. Maximum Tolerable Peak
Current vs. Pulse Duration – HER.
50
100
R
= 770°C/W
θ
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
J-A
45
40
35
DERATING OF I
MAXIMUM
DC
30
25
20
15
10
HER
10
GREEN
YELLOW
5
0
1
DC OPERATION
90 100 110 120
20 30 40 50 60 70 80
1
10
100
1000
10000
t
– PULSE DURATION – µs
p
T
A
– AMBIENT TEMPERATURE – °C
Figure 6. Allowable Peak Current vs.
Pulse Duration – Green.
Figure 7. Maximum Allowable DC
Current per Segment as a Function of
Ambient Temperature.
100
80
12
10
HER
8
60
YELLOW
6
YELLOW
40
HER
4
GREEN
20
2
GREEN
0
0
0
1.0
2.0
3.0
4.0
5.0
0
5
10
15
20
25
30
I
– FORWARD CURRENT PER SEGMENT – mA
V
– FORWARD VOLTAGE – V
F
F
Figure 9. Relative Luminous Intensity
vs. DC Forward Current.
Figure 8. Forward Current vs.
Forward Voltage Characteristics.
8
HER Low Current
20
16
14
12
10
8
50
40
30
20
10
0
R
= 770°C/W
θ
J-A
18
16
HER
14
12
10
8
HER
6
HER
6
4
2
0
4
2
0
0
2
4
6
8
10 12 14 16
0
0.5
1.0
1.5
2.0
2.5
3.0
20 30 40 50 60 70 80 90 100 110 120
V
– FORWARD CURRENT PER SEGMENT – mA
V
F
– FORWARD VOLTAGE – V
F
T
– AMBIENT TEMPERATURE – °C
A
Figure 10. Maximum Allowable
Average or DC Current vs. Ambient
Temperature.
Figure 11. Forward Current vs.
Forward Voltage.
Figure 12. Relative Luminous
Intensity vs. DC Forward Current.
Intensity Bin Limits (mcd)
HER Low Current, AlGaAs Red Low Current
HDSP-31xL/H, HDSP-51xL/H
IV Bin Category
Min.
0.180
0.280
0.450
0.700
1.100
1.800
2.800
4.500
7.000
Max.
0.360
0.560
0.900
1.400
2.200
3.600
5.600
9.000
15.000
E
F
G
H
I
K
L
M
N
HER Std. Current, Green Std. Current,
Yellow Std. Current
HDSP-31xE/G/Y, HDSP-51xE/G/Y
IV Bin Category
Min.
0.450
0.700
1.100
1.800
2.800
4.500
7.000
Max.
0.900
1.400
2.200
3.600
5.600
9.000
15.000
G
H
I
K
L
M
N
9
Color Categories
Dominant Wavelength (nm)
Color
Bin
1
3
Min.
Max.
Yellow
581.50
584.00
586.50
589.00
573.00
570.00
567.00
564.00
585.00
587.50
590.00
592.50
577.00
574.00
571.00
568.00
2
4
2
Green
3
4
5
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your local
Agilent representatives for further clarification/information.
Electrical/Optical
For more information on
electrical/optical characteristics,
please see Application Note 1005.
Soldering/Cleaning
various solvents attack or dissolve
the encapsulating epoxies used to
form the package of plastic LED
parts.
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloro-
ethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
For further information on
soldering LEDs, please refer to
Application Note 1027.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/Interna-
tional), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2005 Agilent Technologies, Inc.
Obsoletes 5988-3204EN
March 9, 2005
5989-2640EN
相关型号:
©2020 ICPDF网 联系我们和版权申明