B2201A [AGILENT]
Leakage Switch Mainframe; 漏电开关主机型号: | B2201A |
厂家: | AGILENT TECHNOLOGIES, LTD. |
描述: | Leakage Switch Mainframe |
文件: | 总4页 (文件大小:107K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Agilent B2200A
fA Leakage Switch Mainframe
Agilent B2201A
14ch Low Leakage Switch Mainframe
Data Sheet
Introduction
Basic functions
Agilent B2200A fA leakage switch
mainframe and B2201A 14ch low
leakage mainframe functions:
• Switches DC current, DC voltage,
capacitance and LCR meters
• Set and monitor connection status
on front panel
• Configurated status display with
LED matrix display
• Connection setup by light pen
• Controls through GP-IB interface
• Auto ground function
Agilent B2200A fA leakage switch mainframe
• Self-test, relay function test
• Relay cleaning
Configuration
Input (B2200A/B2201A)
General specifications
Temperature range Operation:
Storage:
+5° C to 35° C
–20° C to 70° C
Humidity range
Operation:
Storage:
+5% to 70% R.H. no condensation
(B2200A, B2210A)
• IV port: 8 triaxial ports
(or 4 Kelvin triaxial ports) with
low leakage performance
< 80% @35° C, < 60% @ 65° C
no condensation
(B2201A, B2211A)
• AUX port: 6 BNC ports including
dedicated 2 CV ports
< 80% @ 65° C no condensation
0 m to 2,000 m
Altitude
Operation:
Storage:
Safety:
0 m to 15,240 m
CSA C22.2 No.1010.1/IEC 1010-1
CISPR 11 Group 1 class A&EN50082-1
• All input ports can use concurrently
Regulatory
Compliance
EMC:
Output (B2210A/B2211A)
Power requirement 90 to 264 V (continuous), 47 to 63 Hz, 2 A/200 VA max
Number of slots
Size
4 slots for 48 mm height switch module.
• 12 triaxial ports per switch module.
Frame can have 4 modules
B2200A/B2201A
B2210A/B2211A
B2200A/B2201A
B2210A
430 mm W x 320 mm H x 600 mm D
395 mm W x 48 mm H x 500 mm D
14.0 kg
4.5 kg
3.5 kg
maximum. (Total 48 ports)
Weight (approx.)
Software
B2211A
The B2200A and B2201A include
a CD-ROM with VXI Plug&Play driver
which contains capacitance compen-
sation routine.
Number of ports (B2210A, B2211A use with B2200A, B2201A)
I-V port:
AUX port:
Output channel:
8 triaxial ports (with guard)
6 BNC ports (2 of CV port)
12 triaxial ports (with guard),
max. 48 ports
Switch module specifications (Used with mainframe*1)
Condition
B2210A
1.0
B2211A
1.0
Max current rating (A):
I-V port
AUX port
0.5
0.5
Max voltage rating (V):
I-V: (to common)
I-V: (to other ch.)
AUX: (to common)
AUX: (to other ch.)
I-V port
200
200
300
300
100
100
100
100
Close channel residual resistance (Ω):
Channel isolation resistance (Ω):
0.6
0.6
AUX port
1.5
1.5
I-V port
1x1014
1x109
5x1013
1x109
AUX port
Condition: 23° C 5° C, 5% to 60% R.H.
1. B2200A only supports B2210A fA leakage switch module.
B2201A only supports B2211 14ch low leakage switch module.
Mixed configuration is not supported.
2
Supplemental characteristics (B2200A/B2210A)*1
Specification condition
Offset current
10 fA*2
I-V port
I-V port
I-V port
AUX port
I-V port
AUX port
Specification and supplemental
characteristics are defined at 23° C
5° C < 60% relative humidity (R.H.)
IM noise (RMS)
0.6 fA*3
Channel crosstalk capacitance
< 1 pF/ch
< 3 pF/ch
< 50 µV
Offset voltage
The supplemental characteristics
entries in the following specifica-
tion are not warranted but they
provided useful information about the
functions and performances of the
instruments.
< 80 µV
Settling time*4
Band width (at –3 dB)
Guard capacitance
2.0 sec at 50 fA
30 MHz
AUX port
I-V port
< 145 pF*5
Additional C measurement error
<
1 % + 0.2 pF*6 AUX port
Supplemental characteristics (B2201A/B2211A)*1
Accessories & cables
Agilent 16443A Light pen for B2200A/
B2201A
Offset current
100 fA*7
I-V port
I-V port
I-V port
AUX port
I-V port
AUX port
IM Noise (RMS)
5 fA*3
< 0.5 pF/ch
< 3 pF/ch
< 80 µV
Agilent 16494A Triaxial cable
Agilent 16493K Kelvin triaxial cable
(for input port)
Channel crosstalk capacitance
Offset voltage
(Between 4155/56
< 100 µV
2.0 sec at 300 fA
30 MHz
series or E5270 series
and B2200/2201A
Settling time*4
Band width (at –3 dB)
Guard capacitance
AUX port
I-V port
input port)
< 145 pF*5
Agilent 16494B Kelvin triaxial cable
Additional C measurement error
<
1 % + 0.2 pF*6 AUX port
(for output port)
Agilent 16494F CMU input cable
Agilent 16493N GND cable
(Between GND of
*1. B2200A only supports B2210A fA leakage switch module.
B2201A only supports B2211 14ch low leakage switch module.
Mixed configuration is not supported.
*2. The offset current when zero volts is applied to all input and output channels.
E5270/41501 and
This measurement is made on a port, 5 seconds after a switching a relay.
B2201A/B2200A)
*3. Measured 100 PLC by 4156C when zero volts are applied to all other paths.
*4. After 10 V applied.
*5. The guard capacitance of the closed port on input and output ports when
4 modules per frame are installed.
*6. The additional error using the C-compensation algorithm for Agilent 4284 at
1 kHz to 1 MHz, <1000 pF and 3 m cable.
*7. The offset current when zero volts is applied to all input and out channels.
This measurement is made on a port, 60 seconds after a switching a relay.”
Agilent B2200A
fA leakage switch
mainframe (back
panel)
3
www.agilent.com
For more information on Agilent
Agilent Email Updates
Technologies’ products, applications or
services, please contact your local Agilent
office. The complete list is available at:
Remove all doubt
www.agilent.com/find/emailupdates
Get the latest information on the
products and applications you select.
Our repair and calibration services
will get your equipment back to you,
performing like new, when prom-
ised. You will get full value out of
your Agilent equipment through-
out its lifetime. Your equipment
will be serviced by Agilent-trained
technicians using the latest factory
calibration procedures, automated
repair diagnostics and genuine parts.
You will always have the utmost
confidence in your measurements.
For information regarding self
maintenance of this product, please
contact your Agilent office.
www.agilent.com/find/contactus
Americas
Canada
(877) 894-4414
305 269 7500
(800) 829-4444
Agilent Direct
Latin America
United States
www.agilent.com/find/agilentdirect
Quickly choose and use your test
equipment solutions with confidence.
Asia Pacific
Australia
China
1 800 629 485
800 810 0189
800 938 693
Hong Kong
India
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
1 800 226 008
Japan
Korea
Malaysia
Singapore
Taiwan
Agilent offers a wide range of ad-
ditional expert test and measure-
ment services for your equipment,
including initial start-up assistance,
onsite education and training, as
well as design, system integration,
and project management.
Thailand
Europe & Middle East
Austria
Belgium
Denmark
Finland
France
01 36027 71571
32 (0) 2 404 93 40
45 70 13 15 15
358 (0) 10 855 2100
0825 010 700*
For more information on repair and
calibration services, go to:
*0.125 €/minute
Germany
Ireland
07031 464 6333
1890 924 204
www.agilent.com/find/removealldoubt
Israel
972-3-9288-504/544
39 02 92 60 8484
31 (0) 20 547 2111
34 (91) 631 3300
0200-88 22 55
Italy
Netherlands
Spain
Product specifications and descriptions
in this document subject to change
without notice.
Sweden
Switzerland
0800 80 53 53
United Kingdom 44 (0) 118 9276201
Other European Countries:
www.agilent.com/find/contactus
Revised: October 1, 2008
© Agilent Technologies, Inc. 2009
Printed in USA, February 25, 2009
5989-1354EN
相关型号:
©2020 ICPDF网 联系我们和版权申明