MIC-5601A-M1E [ADVANTECH]
Advanced Mezzanine Card Intel? Pentium? M Processor AMC; 高级夹层卡英特尔?奔腾? M处理器AMC型号: | MIC-5601A-M1E |
厂家: | Advantech Co., Ltd. |
描述: | Advanced Mezzanine Card Intel? Pentium? M Processor AMC |
文件: | 总2页 (文件大小:269K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Advanced Mezzanine Card
MIC-5601
Intel® Pentium® M Processor AMC
Features
. Supports Intel® Pentium® M processor Low Voltage or Celeron® M
processor Ultra Low Voltage
. Intel® 3100 chipset 400/533 MHz FSB
. 1 GB DDR2 400 MHz SDRAM with ECC
. One Gigabit Ethernet (RJ-45), one USB 2.0 port, and one console port
(mini-USB) to front panel
. AMC connector routes dual Gigabit Ethernet SerDes (x2), SATA (x2),
USB (x2), dual PCIe x4, or single PCIe x8
. Boot from network, CompactFlash, SATA, USB or onboard flash disk
. Supports IPMI v1.5 and Serial-over-LAN function
. AMC.0, AMC.1, AMC.2 and AMC.3 compliant
RoHS
COMPLIANT
2002/95/EC
Introduction
The MIC-5601 is a highly integrated single-width, mid-size, processor AMC. Its design is based on the low-power, high-performance Intel Celeron M ULV and Pentium M LV
processors combined with the high-performance Intel 3100 chipset. The board includes 1 GB of soldered DDR2 400 MHz memory with ECC for higher MTBF and optimum cooling.
To facilitate development, test and integration whilst offering typical network connectivity once deployed, the front panel provides a gigabit Ethernet connector, a serial port and a
USB 2.0 host port.
The MIC-5601 maximizes AMC edge connector connectivity for the best design flexibility. When redundancy or two separate interconnects are required, the board can be configured
with two PCI Express x4 ports or with a single PCI Express x8 port when throughput is essential. Two gigabit Ethernet ports provide AMC.2 compliance and offer control and data
plane connectivity to facilitate the migration of existing applications. Both ports connect to the 3100 chipset via PCI Express for maximum data throughput. Dual SATA interfaces
provide AMC.3–compliant storage and two USB ports offer further connectivity opportunities.
A dedicated Module Management Controller (MMC) monitors onboard conditions and manages hot swap operation for field upgrades or module replacement without the need to
power down the underlying system.
Specifications
CPU
Intel Celeron M ULV (373) or Pentium M LV (738) up to 1.4 GHz
Intel 3100
AMI (1. Dual images with update rollback, 2. CMOS settings can be changed over IPMI, and 3. CMOS backup works
without battery)
Chipset
Processor System
BIOS
Front Side Bus
PCI Express
Technology
Max. Capacity
Controller
Interface
CompactFlash
Onboard
400/533 MHz
Bus
PCI Express rev1.0a : one x8 and two x4 routed to AMC connector
DDR2 400 with ECC
1 GB
Memory
Ethernet
Mass Storage
Intel 82571EB dual-port Gigabit Ethernet controller (support 802.3d compliant link aggregation)
One GbE accessible on front panel via RJ-45 and two SerDes links to AMC common options region ports 0 and 1
Optional expansion board with CF type-1 socket
1GB industrial grade internal flash disk (used as NV storage, emergency boot disk or diagnostics boot media)
Two SATA interfaces to common ports region 2-3
One SATA routed to CF daughter board
Routed to front panel as USB Slave interface through onboard USB to Serial converter
One USB 2.0 compliant host port (standard USB Connector) on front panel
Two USB 2.0 ports connect to rear AMC edge connector
AMC compliant watchdog
AMC edge connector
Other
I/O
SATA Interface
Serial Interface
USB Interface
I/O
AMC edge connector
Watchdog Timer
Hardware Monitor
Controller
Source Code
Update Standard
Compatibility
AMC
IPMI v1.5 compatible MMC
Pigeon Point System-based
HPM.1 compliant
Carrier Grade Linux (Wind River Platform for Network Equipment, Linux Edition 2.0)
Mid-size, single width
AMC.0 compliant
Firmware
Operating System
Form Factor
Interface
Miscellaneous
Power Requirement
LEDs
Configuration
Consumption
x1 blue for hot swap, x1 red/amber for failure and OOS, x1 green for general purpose
Pentium M 738 LV + 3100 + 1 GB on-board DDR2 SDRAM
31.2 watts
MIC-5601
Block Diagram
COM2
IPMB-L
Pentium M
Celeron M
MMC
1GB
Flash Disk
DDR PLL
(option expansion Module)
USB1
SATA21
SATA to PATA
Converter
DDR2
DRAM
CF Disk
c
c
r
DDR-II
LPC
AMC Con
FWH
TPM (optional)
Intel 3100
USB2 & USB3
Port 16
SATA 0 & SATA1
Ports 2,3
USB-Serial
Converter
Mini USB
Con.
COM1
One PCIe x8 or two PCIe x4
Ports 4..11
IMCH
PCIe x4
SERDES
USB0
Ports 0,1
USB Con.
IICH
Dual GbE
RJ45 w/
X’mr
FrontPanel
Clock Generator
DC/DC Converter
Physical
Dimension
Temperature
180.6 mm x 73.5 mm
Operating
-5 ~ 55° C (23 ~ 122° F)
Non-operating
-40 ~ 70° C (-40 ~ 140° F)
Humidity
Vibration (5 ~ 500 Hz)
Shock
IEC60068-2-78 (95%RH @ 40° C)
IEC60068-2-6 ( 0.002 G2/Hz, 1 Grms)
IEC60068-2-27 (10 G, 11 ms)
Environment
Altitude
300 m below sea level to 4,000 m above sea level
UL94V0, FCC Class B, CE, RoHS & WEEE Ready
Designed for GR-63-CORE and GR-1089-CORE
PICMG AMC.0, AMC.1, AMC.2, AMC.3, IPMI v1.5, HPM.1
10,000 above sea level
Conformance
NEBS Level 3
Standards
Regulatory
Compliance
Ordering Information
On-Board Option
Model Number
CPU
Memory
1 GB DDR2 with ECC
1 GB DDR2 with ECC
MIC-5601A-M1E
MIC-5601B-M1E
Pentium M LV 1.4 GHz (738)
Celeron M ULV 1 GHz (373)
Notes:
1. TPM support will be available as an option.
2. Full size front panel design will be available upon request.
3. CF module available as an option.
Online Download
www.advantech.com/products
相关型号:
MIC-5603
Advanced Mezzanine Card based on 3rd Generation Intel® Core⢠Processors with ECC
ADVANTECH
MIC-5603A2FZ-M4E
Advanced Mezzanine Card based on 3rd Generation Intel® Core⢠Processors with ECC
ADVANTECH
MIC-5603A2FZ-M8E
Advanced Mezzanine Card based on 3rd Generation Intel® Core⢠Processors with ECC
ADVANTECH
©2020 ICPDF网 联系我们和版权申明