HMC586LC4BTR [ADI]

Wideband VCO SMT w/Buffer Amplifier, 4 - 8 GHz;


型号：	HMC586LC4BTR
厂家：	ADI
描述：	Wideband VCO SMT w/Buffer Amplifier, 4 - 8 GHz 振荡器
文件：	总7页 (文件大小：310K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

HMC586LC4B

v03.0514

WIDEBAND MMIC VCO w/ BUFFER

AMPLIFIER, 4 - 8 GHz

Typical Applications

Features

Low Noise wideband MMIC VCO is ideal for:

Wide Tuning Bandwidth

• Industrial/Medical Equipment

Pout: +5 dBm

• Test & Measurement Equipment

• Military Radar, EW & ECM

Low SSB Phase Noise: -100 dBc/Hz @100 kHz

No External Resonator Needed

Single Positive Supply: +5V @ 55 mA

RoHS Compliant 4 x 4 mm SMT Package

Functional Diagram

General Description

The HMC586LC4B is a wideband GaAs InGaP

Voltage Controlled Oscillator which incorporates the

resonator, negative resistance device, and varactor

diode. Output power and phase noise performance

are excellent over temperature due to the oscillator’s

monolithic construction. The Vtune port accepts

an analog tuning voltage from 0 to +18V. The

HMC586LC4B VCO operates from a single +5V sup-

ply, consumes only 55 mA of current, and is housed in

a RoHS compliant SMT package. This wideband VCO

uniquely combines the attributes of ultra small size,

low phase noise, low power consumption, and wide

tuning range.

Electrical Speciﬁcations, T_A= +25° C, Vcc = +5V

Parameter

Min.

Typ.

4 - 8

Max.

Units

GHz

Frequency Range

Power Output

dBm

SSB Phase Noise @ 100 kHz Offset

SSB Phase Noise @ 10 kHz Offset

Tune Voltage (Vtune)

-100

-75

dBc/Hz

Supply Current (Icc) (Vcc = +5.0V)

Tune Port Leakage Current (Vtune = +15V)

Output Return Loss

µA

2nd Harmonic

-14

dBc

Pulling (into a 2.0:1 VSWR)

Pushing @ Vtune= +5V

MHz pp

MHz/V

MHz/°C

0.8

Frequency Drift Rate

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery, and to place orders: Analog Devices, Inc.,

_resF_poo_nr_sibp_ilir_tyic_ise_a,_ssd_ume_el_div_be_{y A}ry_nala_ogn_Dd_evt_ico_esp_fola_{r it}c_se_useo_,r_nd_ore_for_rs_a:_nyH_ini_frt_it_ni_gt_ee_meM_ntsic_ofr_po_aw_tena_tsv_oe_{r o}C_theo_rrporation, 2 Elizabeth Drive, Chelmsford, MA 01824

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

rights of third parties that may result from its use. Specifications subject to change without notice. No

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Phone: 781-329-4700 • Order online at www.analog.com

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

^{Trademarks and registered trademarks ar}A^{e t}p^hep^pl^ri^oc^pea^rtt^yio^ofn^theS^iru^resp^pp^eco^tivr^et:^owP^neh^rso^.ne: 978-250-3343 or apps@hittite.com

Application Support: Phone: 1-800-ANALOG-D

HMC586* PRODUCT PAGE QUICK LINKS

Last Content Update: 11/29/2017

COMPARABLE PARTS

View a parametric search of comparable parts.

DESIGN RESOURCES

• HMC586 Material Declaration

• PCN-PDN Information

EVALUATION KITS

• HMC586LC4B Evaluation Board.

• Quality And Reliability

• Symbols and Footprints

DOCUMENTATION

Data Sheet

DISCUSSIONS

View all HMC586 EngineerZone Discussions.

• HMC586 Data Sheet

SAMPLE AND BUY

REFERENCE MATERIALS

Visit the product page to see pricing options.

Product Selection Guide

TECHNICAL SUPPORT

Submit a technical question or find your regional support

number.

• RF, Microwave, and Millimeter Wave IC Selection Guide

2017

Quality Documentation

• Package/Assembly Qualification Test Report: LC4, LC4B

(QTR: 2014-00380 REV: 01)

DOCUMENT FEEDBACK

• Semiconductor Qualification Test Report: GaAs HBT-A

Submit feedback for this data sheet.

(QTR: 2013-00228)

Technical Articles

• SMT Wideband MMIC VCOs Tune from 4 to 12.5 GHz

This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not

trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.

HMC586LC4B

v03.0514

WIDEBAND MMIC VCO w/ BUFFER

AMPLIFIER, 4 - 8 GHz

Frequency vs. Tuning Voltage, Vcc = +5V

Frequency vs. Tuning Voltage, T = +25 C

4.75 V

+25 C

+85 C

-40 C

5.0

5.25 V

TUNING VOLTAGE (VOLTS)

Output Power vs.

Tuning Voltage, Vcc= +5V

Sensitivity vs. Tuning Voltage, Vcc= +5V

600

+25 C

+85 C

-40 C

500

400

300

200

100

+25 C

+85 C

-40 C

-2

-4

TUNING VOLTAGE (VOLTS)

SSB Phase Noise vs. Tuning Voltage

Typical SSB Phase Noise @ Vtune= +5V

-15

-20

-40

10 kHz

100 kHz

-30

-45

-60

-75

-60

-80

-90

-100

-120

-105

-120

10²

10³

10⁴

10⁵

10⁶

TUNING VOLTAGE (VOLTS)

OFFSET FREQUENCY (Hz)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

rights of third parties that may result from its use. Specifications subject to change without notice. No

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Phone: 781-329-4700 • Order online at www.analog.com

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

^{Trademarks and registered trademarks ar}A^{e t}p^hep^pl^ri^oc^pea^rtt^yio^ofn^theS^iru^resp^pp^eco^tivr^et:^owP^neh^rso^.ne: 978-250-3343 or apps@hittite.com

Application Support: Phone: 1-800-ANALOG-D

HMC586LC4B

v03.0514

WIDEBAND MMIC VCO w/ BUFFER

AMPLIFIER, 4 - 8 GHz

Absolute Maximum Ratings

Vcc

+5.5 Vdc

Vtune

0 to +22V

135 °C

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

Junction Temperature

Continuous Pdiss (T = 85°C)

(derate 12.5 mW/°C above 85°C)

625 mW

80 °C/W

Thermal Resistance

(junction to ground paddle)

Storage Temperature

Operating Temperature

-65 to +150 °C

-40 to +85 °C

Outline Drawing

NOTES:

1. PACKAGE BODY MATERIAL: ALUMINA

2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni.

3. DIMENSIONS ARE IN INCHES [MILLIMETERS].

4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-

6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED

TO PCB RF GROUND.

Package Information

Part Number

Package Body Material

Alumina, White

Lead Finish

MSL Rating

MSL3 ^[1]

Package Marking ^[2]

H586

XXXX

HMC586LC4B

Gold over Nickel

[1] Max peak reﬂow temperature of 260 °C

[2] 4-Digit lot number XXXX

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

rights of third parties that may result from its use. Specifications subject to change without notice. No

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Phone: 781-329-4700 • Order online at www.analog.com

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

^{Trademarks and registered trademarks ar}A^{e t}p^hep^pl^ri^oc^pea^rtt^yio^ofn^theS^iru^resp^pp^eco^tivr^et:^owP^neh^rso^.ne: 978-250-3343 or apps@hittite.com

Application Support: Phone: 1-800-ANALOG-D

HMC586LC4B

v03.0514

WIDEBAND MMIC VCO w/ BUFFER

AMPLIFIER, 4 - 8 GHz

Pin Descriptions

Pin Number

Function

Description

Interface Schematic

1 - 3, 5 - 11, 13,

17 - 24

No Connection. These pins may be connected to RF/DC

ground. Performance will not be affected.

N/C

Control Voltage and Modulation Input. Modulation bandwidth

dependent on drive source impedance. See “Determining

the FM Bandwidth of a Wideband Varactor Tuned VCO”

application note.

Vtune

Vcc

Supply Voltage Vcc= +5V

Package bottom has an exposed metal paddle that

14, 16

GND

must also be RF & DC grounded.

RFOUT

RF output (AC coupled)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

rights of third parties that may result from its use. Specifications subject to change without notice. No

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Phone: 781-329-4700 • Order online at www.analog.com

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

^{Trademarks and registered trademarks ar}A^{e t}p^hep^pl^ri^oc^pea^rtt^yio^ofn^theS^iru^resp^pp^eco^tivr^et:^owP^neh^rso^.ne: 978-250-3343 or apps@hittite.com

Application Support: Phone: 1-800-ANALOG-D

HMC586LC4B

v03.0514

WIDEBAND MMIC VCO w/ BUFFER

AMPLIFIER, 4 - 8 GHz

Evaluation PCB

List of Materials for Evaluation PCB 108648 ^[1]

The circuit board used in the application should

use RF circuit design techniques. Signal lines

should have 50 Ohm impedance while the package

ground leads and exposed ground paddle should

be connected directly to the ground plane similar

to that shown. A sufficient number of via holes

should be used to connect the top and bottom

ground planes. The evaluation circuit board shown

is available from Hittite upon request.

Item

Description

PCB Mount SMA RF Connector, Johnson

PCB Mount SMA Connector, SRI

DC Header

1000 pF Capacitor, 0402 Pkg.

4.7 µF Capacitor, Tantalum

HMC586LC4B VCO

[2]

PCB

108646 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

rights of third parties that may result from its use. Specifications subject to change without notice. No

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Phone: 781-329-4700 • Order online at www.analog.com

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

^{Trademarks and registered trademarks ar}A^{e t}p^hep^pl^ri^oc^pea^rtt^yio^ofn^theS^iru^resp^pp^eco^tivr^et:^owP^neh^rso^.ne: 978-250-3343 or apps@hittite.com

Application Support: Phone: 1-800-ANALOG-D

HMC586LC4B

v03.0514

WIDEBAND MMIC VCO w/ BUFFER

AMPLIFIER, 4 - 8 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

rights of third parties that may result from its use. Specifications subject to change without notice. No

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Phone: 781-329-4700 • Order online at www.analog.com

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

^{Trademarks and registered trademarks ar}A^{e t}p^hep^pl^ri^oc^pea^rtt^yio^ofn^theS^iru^resp^pp^eco^tivr^et:^owP^neh^rso^.ne: 978-250-3343 or apps@hittite.com

Application Support: Phone: 1-800-ANALOG-D

HMC586LC4BTR [ADI]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E