HMC583LP5ETR [ADI]
VCO SMT with Fo/2 & Divide-by-4, 11.5 - 12.8 GHz;型号: | HMC583LP5ETR |
厂家: | ADI |
描述: | VCO SMT with Fo/2 & Divide-by-4, 11.5 - 12.8 GHz 振荡器 |
文件: | 总7页 (文件大小:398K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC583LP5 / 583LP5E
v03.1210
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Typical Applications
Features
Low noise MMIC VCO w/Half Frequency, Divide-by-4
Outputs for:
Dual Output: Fo = 11.5 - 12.8 GHz
Fo/2 = 5.75 - 6.4 GHz
• Point to Point/Multipoint Radio
• Test Equipment & Industrial Controls
• SATCOM
Pout: +11 dBm
Phase Noise: -110 dBc/Hz @100 kHz Typ.
No External Resonator Needed
32 Lead 5x5mm SMT Package: 25mm²
• Military End-Use
Functional Diagram
General Description
The HMC583LP5 & HMC583LP5E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs.
The HMC583LP5 & HMC583LP5E integrate resona-
tors, negative resistance devices, varactor diodes
and feature half frequency and divide-by-4 outputs.
The VCO’s phase noise performance is excellent over
temperature, shock, and process due to the oscillator’s
monolithic structure. Power output is +11 dBm typical
from a +5V supply voltage. The prescaler and RF/2
functions can be disabled to conserve current if not
required. The voltage controlled oscillator is packaged
in a leadless QFN 5x5 mm surface mount package,
and requires no external matching components.
8
Electrical Specifications, TA = +25° C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V
Parameter
Min.
Typ.
Max.
Units
Fo
Fo/2
11.5 - 12.8
5.75 - 6.4
GHz
GHz
Frequency Range
Power Output
RFOUT
RFOUT/2
RFOUT/4
+7
+9
-9
+13
+15
-3
dBm
dBm
dBm
SSB Phase Noise @ 100 kHz Offset,
Vtune= +5V @ RFOUT
-110
dBc/Hz
Tune Voltage
Vtune
2
12
390
10
V
Supply Current
Icc(Dig) + Icc(Amp) + Icc(RF)
310
350
2
mA
µA
dB
Tune Port Leakage Current (Vtune= 12V)
Output Return Loss
Harmonics/Subharmonics
1/2
2nd
3rd
26
22
30
dBc
dBc
dBc
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= 5V
Frequency Drift Rate
3
MHz pp
MHz/V
MHz/°C
20
1.0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norfor anyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 1
Application Support: Phone: 1-800-ANALOG-D
HMC583* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
DESIGN RESOURCES
• HMC583 Material Declaration
• PCN-PDN Information
EVALUATION KITS
• HMC583LP5 Evaluation Board.
• Quality And Reliability
• Symbols and Footprints
DOCUMENTATION
Data Sheet
DISCUSSIONS
View all HMC583 EngineerZone Discussions.
• HMC583 Data Sheet
SAMPLE AND BUY
REFERENCE MATERIALS
Visit the product page to see pricing options.
Quality Documentation
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
• Package/Assembly Qualification Test Report: 32L 5x5mm
QFN Package (QTR: 10009 REV: 05)
• Package/Assembly Qualification Test Report: LP3, LP4, LP5
& LP5G (QTR: 2014-00145)
• Package/Assembly Qualification Test Report: Plastic
Encapsulated QFN (QTR: 05006 REV: 02)
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
• Semiconductor Qualification Test Report: GaAs HBT-A
(QTR: 2013-00228)
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
HMC583LP5 / 583LP5E
v03.1210
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Frequency vs. Tuning Voltage, Vcc = +5V
Frequency vs. Tuning Voltage, T= 25°C
13.6
13.6
12.6
11.6
12.6
11.6
+25C
+85C
4.75V
5.00V
10.6
9.6
-40C
10.6
9.6
5.25V
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Output Power
vs. Tuning Voltage, Vcc = +5V
Sensitivity vs. Tuning Voltage, Vcc = +5V
700
16
14
12
10
8
600
+25C
+85C
-40C
8
500
400
300
200
100
0
6
+25C
+85C
-40C
4
2
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
SSB Phase Noise vs. Tuning Voltage
SSB Phase Noise @ Vtune = +5V
-70
0
-20
-80
-40
-60
+25C
+85C
-40C
-90
10kHz OFFSET
100kHz OFFSET
-80
-100
-120
-140
-160
-180
-100
-110
-120
0
1
2
3
4
5
6
7
8
9
10 11 12 13
103
104
105
106
107
TUNING VOLTAGE (VOLTS)
OFFSET FREQUENCY (Hz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norfor anyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 2
Application Support: Phone: 1-800-ANALOG-D
HMC583LP5 / 583LP5E
v03.1210
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
RFOUT/2 Frequency
RFOUT/2 Output Power
vs. Tuning Voltage, Vcc = +5V
vs. Tuning Voltage, Vcc = +5V
6.8
16
6.4
6
12
8
5.6
5.2
4.8
+25C
+85C
-40C
+25C
+85C
-40C
4
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Divide-by-4 Frequency
Divide-by-4 Output Power
vs. Tuning Voltage, Vcc = +5V
vs. Tuning Voltage, Vcc = +5V
3.4
0
+25C
+85C
-40C
3.2
3
-2
8
-4
-6
2.8
2.6
2.4
+25C
+85C
-40C
-8
-10
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
Vcc(Dig), Vcc(Amp), Vcc(RF)
+5.5 Vdc
0 to +15V
135 °C
Vcc (V)
Icc (mA)
Vtune
4.75
320
Junction Temperature
5.00
350
Continuous Pdiss (T=85 °C)
(derate 43.5 mW/C above 85 °C
5.25
380
2.17 W
Note: VCO will operate over full voltage range shown above.
Thermal Resistance
(junction to ground paddle)
23 °C/W
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-65 to +150 °C
-40 to +85 °C
Class 1A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norfor anyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 3
Application Support: Phone: 1-800-ANALOG-D
HMC583LP5 / 583LP5E
v03.1210
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
8
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL3 [1]
Package Marking [3]
H583
XXXX
HMC583LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
H583
XXXX
HMC583LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL3 [2]
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1 - 3, 8 - 10, 13 - 18,
20, 22 - 28, 30 - 32
No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
N/C
Divide-by-4 output.
DC block required.
4
6
RFOUT/4
Supply voltage for prescaler. If prescaler is not
required, this pin may be left open to conserve approxi-
mately 65 mA of current.
Vcc (Dig)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norfor anyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 4
Application Support: Phone: 1-800-ANALOG-D
HMC583LP5 / 583LP5E
v03.1210
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
Supply voltage, for RFOUT/2 output. If RFOUT/2
is not required, this pin may be left open to
conserve approximately 30 mA of current.
7
Vcc (Amp)
12
19
RFOUT/2
RF OUT
Half frequency output (AC coupled).
RF output (AC coupled).
21
Vcc (RF)
Supply Voltage, +5V
8
Control voltage and modulation input. Modulation
bandwidth dependent on drive source impedance. See
“Determining the FM Bandwidth of a Wideband Varac-
tor Tuned VCO” application note.
29
VTUNE
GND
Package bottom has an exposed metal paddle that
must be connected to RF/DC ground.
5, 11, Paddle
Typical Application Circuit
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norfor anyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 5
Application Support: Phone: 1-800-ANALOG-D
HMC583LP5 / 583LP5E
v03.1210
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 11.5 - 12.8 GHz
Evaluation PCB
8
List of Materials for Evaluation PCB 110227 [1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and backside ground paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Item
Description
J1 - J4
J5 - J6
C1 - C3
C4
PCB Mount SMA RF Connector
2 mm DC Header
100 pF Capacitor, 0402 Pkg.
1,000 pF Capacitor, 0402 Pkg.
2.2 µF Tantalum Capacitor
HMC583LP5 / HMC583LP5E VCO
110225 Eval Board
C5 - C7
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norfor anyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 6
Application Support: Phone: 1-800-ANALOG-D
相关型号:
HMC583LP5TR
Voltage Controlled Oscillator, 11500MHz Min, 12800MHz Max, PLASTIC, LEADLESS, QFN-32
HITTITE
HMC584LP5ETR
Voltage Controlled Oscillator, 12500MHz Min, 13900MHz Max, ROHS COMPLIANT, PLASTIC, LEADLESS, QFN-32
HITTITE
HMC584LP5TR
Voltage Controlled Oscillator, 12500MHz Min, 13900MHz Max, PLASTIC, LEADLESS, QFN-32
HITTITE
©2020 ICPDF网 联系我们和版权申明