HMC392LC4RTR [ADI]
IC,MICROWAVE/MILLIMETER WAVE AMPLIFIER,SINGLE,GAAS,LLCC,24PIN,CERAMIC;型号: | HMC392LC4RTR |
厂家: | ADI |
描述: | IC,MICROWAVE/MILLIMETER WAVE AMPLIFIER,SINGLE,GAAS,LLCC,24PIN,CERAMIC 放大器 |
文件: | 总6页 (文件大小:195K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC392LC4
v02.1208
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
8
Typical Applications
Features
The HMC392LC4 is ideal for:
• Point-to-Point Radios
• VSAT
Gain: 16 dB
Noise Figure: 2.5 dB
Single Supply Voltage: +5V
• LO Driver for HMC Mixers
• Military EW, ECM, C3I
• Space
No External Matching Components Required
50 Ohm Matched Input/Output
RoHS Compliant 4x4 mm SMT Package
Functional Diagram
General Description
The HMC392LC4 is a GaAs MMIC Low Noise Amplifier
which operates between 3.5 and 7.0 GHz. Housed
in a leadless 4x4 mm SMT package, this amplifier
provides 16 dB of gain, 2.5 dB noise figure and 30
dBm IP3 from a +5V supply voltage. HMC392LC4
functions well as a low noise front end or as a driver
amplifier. The RF I/Os are DC blocked and matched to
50 Ohms for ease of use. The HMC392LC4 allows the
use of surface mount manufacturing techniques and
is suitable for high reliability military, industrial and
space applications.
Electrical Specifications, TA = +25° C, Vdd= 5V
Parameter
Min.
Typ.
4.0 - 6.0
16
Max.
Min.
12.5
Typ.
3.5 - 7.0
14.5
0.018
12
Max.
Units
GHz
dB
Frequency Range
Gain
13.5
Gain Variation Over Temperature
Input Return Loss
0.018
15
0.025
0.025
dB/ °C
dB
Output Return Loss
18
12
dB
Output Power for 1 dB Compression (P1dB)
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
Noise Figure
13
25
16
12
23
16
dBm
dBm
dBm
dB
20
20
30
30
2.5
3.1
75
2.9
3.5
75
Supply Current (Idd)
55
55
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 84
HMC392LC4
v02.1208
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
8
Broadband Gain & Return Loss
Gain vs. Temperature
20
20
17
14
11
8
10
S21
S11
S22
0
+25C
+85C
-40C
-10
-20
-30
5
2
3
4
5
6
7
8
9
8
8
3
4
5
6
7
8
8
8
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
+25C
+85C
-40C
+25C
+85C
-40C
-5
-10
-15
-20
-25
-5
-10
-15
-20
-25
3
4
5
6
7
3
4
5
6
7
FREQUENCY (GHz)
FREQUENCY (GHz)
Noise Figure vs. Temperature
Reverse Isolation vs. Temperature
5
0
+25C
-10
+85C
4
-40C
+25C
+85C
-40C
-20
-30
-40
-50
-60
3
2
1
0
3
4
5
6
7
3
4
5
6
7
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 85
HMC392LC4
v02.1208
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
8
P1dB vs. Temperature
Psat vs. Temperature
22
22
20
18
16
14
12
10
20
18
16
14
12
10
+25C
+85C
-40C
+25C
+85C
-40C
3
4
5
6
7
8
3
4
5
6
7
8
FREQUENCY (GHz)
FREQUENCY (GHz)
Gain, Noise Figure & Power
vs. Supply Voltage @ 5.5 GHz
Output IP3 vs. Temperature
32
20
30
28
16
Gain
Noise Figure
P1dB
12
8
26
+25C
+85C
-40C
24
22
20
4
0
3
4
5
6
7
8
4.5
4.7
5
5.2
5.5
VOLTAGE SUPPLY (V)
FREQUENCY (GHz)
Power Compression @ 5.5 GHz
25
20
15
10
5
Pout
Gain
PAE
0
-10
-8
-6
-4
-2
0
2
4
6
8
INPUT POWER (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 86
HMC392LC4
v02.1208
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
8
Typical Supply Current vs. Vdd
Absolute Maximum Ratings
Drain Bias Voltage (Vdd)
+7 Vdc
Vdd (Vdc)
Idd (mA)
RF Input Power (RFIN)(Vdd = +5.0 Vdc)
Channel Temperature
+11 dBm
+4.5
54
55
56
175 °C
0.42 W
+5.0
Continuous Pdiss (T= 85 °C)
(derate 6.5 mW/°C above 85 °C)
+5.5
Note: Amplifier will operate over full voltage ranges shown
above.
Thermal Resistance
(channel to ground paddle)
155 °C/W
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN.
6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 87
HMC392LC4
v02.1208
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
8
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 5 - 14,
18 - 20, 22 - 24
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
N/C
Package bottom has an exposed metal paddle that must
also be connected to RF/DC ground.
2, 4, 15, 17
GND
This pin is AC coupled
and matched to 50 Ohms.
3
RFIN
This pin is AC coupled
and matched to 50 Ohms.
16
RFOUT
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF, 1000pF, and 2.2 μF are required.
21
Vdd
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 88
HMC392LC4
v02.1208
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
8
Evaluation PCB
List of Materials for Evaluation PCB 117490 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Item
J1, J2
Description
SMA
J3 - J4
C1
DC Pin
100 pF capacitor, 0402 pkg.
1,000 pF Capacitor, 0603 pkg.
2.2μF Capacitor, Tantalum
HMC392LC4 Amplifier
C2
C3
U1
[2]
PCB
117858 Evaluation PCB
[1] Reference this number when ordering complete evlaution PCB
[2] Circuit Board Material: Rogers 4350.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 89
相关型号:
©2020 ICPDF网 联系我们和版权申明