HMC390LP4TR [ADI]
VCO SMT w/Buffer Amplifier, 3.55 - 3.9 GHz;型号: | HMC390LP4TR |
厂家: | ADI |
描述: | VCO SMT w/Buffer Amplifier, 3.55 - 3.9 GHz 射频 微波 |
文件: | 总7页 (文件大小:388K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC390LP4 / 390LP4E
v02.0505
MMIC VCO w/ BUFFER
AMPLIFIER, 3.55 - 3.9 GHz
Typical Applications
Features
Low noise MMIC VCO w/Buffer Amplifier for:
• Wireless Local Loop (WLL)
• VSAT & Microwave Radio
• Test Equipment & Industrial Controls
• Military
Pout: +4.7 dBm
Phase Noise: -112 dBc/Hz @100 KHz
No External Resonator Needed
Single Supply: 3V @ 42 mA
QFN Leadless SMT Package, 16 mm2
Functional Diagram
General Description
The HMC390LP4 & HMC390LP4E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs
with integrated resonators, negative resistance
devices, varactor diodes, and buffer amplifiers.
Covering 3.55 to 3.9 GHz, the VCO’s phase noise
performance is excellent over temperature, shock,
vibration and process due to the oscillator’s monolithic
structure. Power output is 4.7 dBm typical from a
single supply of 3V @ 42 mA. The voltage controlled
oscillator is packaged in a low cost leadless QFN 4 x 4
mm surface mount package.
11
Electrical Specifications, TA = +25° C, Vcc = +3V
Parameter
Frequency Range
Min.
1.5
0
Typ.
3.55 - 3.9
4.7
Max.
Units
GHz
dBm
dBc/Hz
V
Power Output
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RF Output
Tune Voltage (Vtune)
-112
10
10
Supply Current (Icc) (Vcc = +3.0V)
Tune Port Leakage Current
42
6
mA
μA
Output Return Loss
dB
Harmonics
2nd
3rd
5
16
dBc
dBc
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= +5V
Frequency Drift Rate
3.3
-5
MHz pp
MHz/V
MHz/°C
0.4
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
11 - 38
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC390* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
DESIGN RESOURCES
• HMC390 Material Declaration
• PCN-PDN Information
EVALUATION KITS
• HMC390LP4 Evaluation Board
• Quality And Reliability
• Symbols and Footprints
DOCUMENTATION
Application Notes
DISCUSSIONS
View all HMC390 EngineerZone Discussions.
• Determining the FM Bandwidth of a Wideband Varactor
Tuned VCO
SAMPLE AND BUY
Visit the product page to see pricing options.
Data Sheet
• HMC390 Data Sheet
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
REFERENCE MATERIALS
Quality Documentation
• Package/Assembly Qualification Test Report: LP4, LP4B,
LP4C, LP4K (QTR: 2013-00487 REV: 04)
DOCUMENT FEEDBACK
• Package/Assembly Qualification Test Report: Plastic
Submit feedback for this data sheet.
Encapsulated QFN (QTR: 05006 REV: 02)
• Semiconductor Qualification Test Report: GaAs HBT-A
(QTR: 2013-00228)
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
HMC390LP4 / 390LP4E
v02.0505
MMIC VCO w/ BUFFER
AMPLIFIER, 3.55 - 3.9 GHz
Frequency vs. Tuning Voltage, T= 25°C
Frequency vs. Tuning Voltage, Vcc= +3V
4.2
4.1
4
4.2
4.1
4
3.9
3.8
3.7
3.6
3.9
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.5
3.4
3.3
3.2
Vcc=2.75V
Vcc= 3.0V
Vcc=3.25V
+25 C
+85 C
-40 C
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
11
Output Power vs.
Tuning Voltage, Vcc= +3V
Sensitivity vs. Tuning Voltage, Vcc= +3V
220
200
180
8
7
6
5
4
3
160
140
120
100
80
+25 C
+85 C
-40 C
+25 C
+85 C
-40 C
60
2
1
0
40
20
0
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Phase Noise vs. Tuning Voltage
Typical SSB Phase Noise @ Vtune= +5V
-80
-85
-90
0
-10
-20
-30
-40
-50
-60
+25 C
+85 C
- 40 C
-95
10 KHz Offset
-70
-80
100 KHz Offset
-100
-90
-105
-110
-115
-120
-100
-110
-120
-130
-140
-150
0
1
2
3
4
5
6
7
8
9
10
103
104
105
106
107
TUNING VOLTAGE (VOLTS)
OFFSET FREQUENCY (Hz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
11 - 39
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC390LP4 / 390LP4E
v02.0505
MMIC VCO w/ BUFFER
AMPLIFIER, 3.55 - 3.9 GHz
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
Vcc
+3.5 Vdc
0 to +11V
135 °C
Vcc (V)
Icc (mA)
Vtune
2.75
35
Channel Temperature
3.0
42
Continuous Pdiss (T = 85°C)
(derate 6.28 mW/°C above 85°C)
3.25
47
565 W
Note: VCO will operate over full voltage range shown above.
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
11
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H390
XXXX
HMC390LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
H390
XXXX
MSL1 [2]
HMC390LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
11 - 40
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC390LP4 / 390LP4E
v02.0505
MMIC VCO w/ BUFFER
AMPLIFIER, 3.55 - 3.9 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1- 14, 17 - 19,
21, 23, 24
N/C
GND
No Connection
15
16
This pin must be connected to RF & DC ground.
RF output (AC coupled)
RFOUT
20
22
Vcc
Supply Voltage Vcc= 3V
11
Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance.
VTUNE
GND
Package bottom has an exposed metal paddle that
must be RF & DC grounded.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
11 - 41
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC390LP4 / 390LP4E
v02.0505
MMIC VCO w/ BUFFER
AMPLIFIER, 3.55 - 3.9 GHz
Evaluation PCB
11
List of Materials for Evaluation PCB 105706 [1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Item
J1 - J2
J3 - J4
C1
Description
PCB Mount SMA RF Connector
DC Pin
4.7 μF Tantalum Capacitor
10,000 pF Capacitor, 0603 Pkg.
HMC390LP4 / HMC390LP4E VCO
105667 Eval Board
C2
U1
PCB*
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
11 - 42
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC390LP4 / 390LP4E
v02.0505
MMIC VCO w/ BUFFER
AMPLIFIER, 3.55 - 3.9 GHz
Notes:
11
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
11 - 43
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
相关型号:
©2020 ICPDF网 联系我们和版权申明