ADuM1100URZ-RL7 [ADI]
iCoupler Digital Isolator; iCoupler数字隔离器型号: | ADuM1100URZ-RL7 |
厂家: | ADI |
描述: | iCoupler Digital Isolator |
文件: | 总20页 (文件大小:384K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
iCoupler Digital Isolator
Data Sheet
ADuM1100
FEATURES
GENERAL DESCRIPTION
High data rate: dc to 100 Mbps (NRZ)
Compatible with 3.3 V and 5.0 V operation/level translation
125°C maximum operating temperature
Low power operation
5 V operation
1.0 mA maximum @ 1 Mbps
4.5 mA maximum @ 25 Mbps
16.8 mA maximum @ 100 Mbps
3.3 V operation
The ADuM11001 is a digital isolator based on Analog Devices
Inc., iCoupler® technology. Combining high speed CMOS and
monolithic air core transformer technology, this isolation
component provides outstanding performance characteristics
superior to alternatives, such as optocoupler devices.
Configured as a pin-compatible replacement for existing high
speed optocouplers, the ADuM1100 supports data rates as high
as 25 Mbps and 100 Mbps.
The ADuM1100 operates with a voltage supply ranging from
3.0 V to 5.5 V, boasts a propagation delay of <18 ns and edge
asymmetry of <2 ns, and is compatible with temperatures up
to 125°C. It operates at very low power, less than 0.9 mA of
quiescent current (sum of both sides), and a dynamic current
of less than 160 μA per Mbps of data rate. Unlike other optocoupler
alternatives, the ADuM1100 provides dc correctness with a
patented refresh feature that continuously updates the output
signal.
0.4 mA maximum @ 1 Mbps
3.5 mA maximum @ 25 Mbps
7.1 mA maximum @ 50 Mbps
8-lead SOIC_N package (RoHS compliant version available)
High common-mode transient immunity: >25 kV/μs
Safety and regulatory approvals
UL recognized
2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A
VDE Certificate of Conformity
The ADuM1100 is offered in three grades. The ADuM1100AR
and ADuM1100BR can operate up to a maximum temperature
of 105°C and support data rates up to 25 Mbps and 100 Mbps,
respectively. The ADuM1100UR can operate up to a maximum
temperature of 125°C and supports data rates up to 100 Mbps.
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
V
IORM = 560 V peak
APPLICATIONS
Digital field bus isolation
Opto-isolator replacement
Computer peripheral interface
Microprocessor system interface
General instrumentation and data acquisition applications
1 Protected by U.S. Patents 5,952,849; 6,525,566; 6,922,080; 6,903,578;
6,873,065; 7,075,329.
FUNCTIONAL BLOCK DIAGRAM
V
1
2
8
V
DD1
DD2
D
E
C
O
D
E
E
N
C
O
D
E
V
I
7
6
GND
2
(DATA IN)
V
O
V
3
DD1
(DATA OUT)
UPDATE
WATCHDOG
GND
1
4
5
GND
2
ADuM1100
NOTES
1. FOR PRINCIPLES OF OPERATION, SEE METHOD OF OPERATION,
DC CORRECTNESS, AND MAGNETIC FIELD IMMUNITY SECTION.
Figure 1.
Rev. I
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2001–2012 Analog Devices, Inc. All rights reserved.
ADuM1100
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Recommended Operating Conditions .................................... 11
Absolute Maximum Ratings ......................................................... 12
ESD Caution................................................................................ 12
Pin Configuration and Function Descriptions........................... 13
Typical Performance Characteristics ........................................... 14
Application Information................................................................ 16
PC Board Layout ........................................................................ 16
Propagation Delay-Related Parameters................................... 16
Applications....................................................................................... 1
General Description......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 3
Specifications..................................................................................... 4
Electrical Specifications—5 V Operation ................................. 4
Electrical Specifications—3.3 V Operation .............................. 6
Electrical Specifications—Mixed 5 V/3 V or 3 V/5 V
Operation....................................................................................... 8
Method of Operation, DC Correctness, and Magnetic
Field Immunity........................................................................... 17
Package Characteristics ............................................................. 10
Regulatory Information............................................................. 10
Insulation and Safety-Related Specifications.......................... 10
Power Consumption .................................................................. 18
Outline Dimensions....................................................................... 19
Ordering Guide .......................................................................... 19
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
Insulation Characteristics.......................................................... 11
Rev. I | Page 2 of 20
Data Sheet
ADuM1100
REVISION HISTORY
3/12—Rev. H to Rev. I
4/03—Rev. B to Rev. C
Created Hyperlink for Safety and Regulatory Approvals
Entry in Features Section .................................................................1
Change to PC Board Layout Section ............................................16
Changes to Features and Patent Note.............................................1
Changes to Regulatory Information...............................................6
Changes to Insulation Characteristics Section..............................6
Changes to Absolute Maximum Ratings........................................7
Changes to Package Branding .........................................................8
Changes to Method of Operation, DC Correctness, and
3/11—Rev. G to Rev. H
Changes to Data Sheet Title.............................................................1
Changes to Ordering Guide...........................................................18
Magnetic Field Immunity Section ................................................11
Replaced Figure 9............................................................................12
6/07—Rev. F to Rev. G
Updated VDE Certification Throughout.......................................1
Changes to Features and Endnote 1................................................1
Changes to Table 5 and Table 6 .......................................................9
Updated Outline Dimensions .......................................................18
Changes to Ordering Guide ..........................................................18
1/03—Rev. A to Rev. B
Added ADuM1100UR Grade........................................... Universal
Changed ADuM1100AR/ADuM1100BR to
ADuM1100 ......................................................................... Universal
Changes to Features and General Description..............................1
Changes to Specifications ................................................................2
Added Electrical Specifications, Mixed 5 V/3 V or 3 V/5 V
Operation Table.................................................................................4
Updated Regulatory Information ...................................................6
Changes to VDE 0884 Insulation Characteristics ........................6
Changes to Absolute Maximum Ratings........................................7
Changes to Package Branding .........................................................8
Updated TPC 3 to TPC 8 .................................................................9
Deleted iCoupler in Field Bus Networks Section .......................11
Changes to Figure 8 ........................................................................12
Added Figure 9 and Related Text..................................................12
3/06—Rev. E to Rev. F
Updated Format.................................................................. Universal
Added Note 1 .....................................................................................1
Changes to Table 1 ............................................................................4
Changes to Table 2 ............................................................................6
Changes to Table 3 ............................................................................8
Added Table 11 ................................................................................13
Inserted Power Consumption Section..........................................18
10/03—Rev. D to Rev. E
Changes to Product Name, Features, and General Description .1
Changes to Regulatory Information ...............................................6
Changes to DIN EN 60747-5-2 (VDE 0884 Part 2) Insulation
Characteristics ...................................................................................6
Changes to Absolute Maximum Ratings........................................7
Changes to Recommended Operating Conditions.......................7
Changes to Ordering Guide.............................................................8
11/02—Rev. 0 to Rev. A
Edits to Features ................................................................................1
Edits to Regulatory Information.....................................................4
Edits to VDE 0884 Insulation Characteristics...............................5
Added Revision History.................................................................12
Updated Outline Dimensions........................................................12
6/03—Rev. C to Rev. D
Changed DIN EN 60747-5-2 (VDE 0884 Part 2) Insulation
Characteristics ...................................................................................6
Updated Ordering Guide .................................................................8
Updated Outline Dimensions........................................................13
Rev. I | Page 3 of 20
Data Sheet
ADuM1100
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS—5 V OPERATION
All voltages are relative to their respective ground. 4.5 V ≤ VDD1 ≤ 5.5 V, 4.5 V ≤ VDD2 ≤ 5.5 V. All minimum/maximum specifications
apply over the entire recommended operation range, unless otherwise noted. All typical specifications are at TA = 25°C, VDD1 = VDD2 = 5 V.
Table 1.
Parameter
Symbol
Min
Typ
Max
Unit
Test Conditions
DC SPECIFICATIONS
Input Supply Current
Output Supply Current
Input Supply Current (25 Mbps)
(See Figure 5)
IDD1 (Q)
IDD2 (Q)
IDD1 (25)
0.3
0.01
2.2
0.8
0.06
3.5
mA
mA
mA
VI = 0 V or VDD1
VI = 0 V or VDD1
12.5 MHz logic signal frequency
Output Supply Current1 (25 Mbps)
(See Figure 6)
Input Supply Current (100 Mbps)
(See Figure 5)
Output Supply Current1 (100 Mbps)
(See Figure 6)
Input Current
IDD2 (25)
IDD1 (100)
IDD2 (100)
0.5
9.0
2.0
1.0
14
mA
mA
mA
12.5 MHz logic signal frequency
50 MHz logic signal frequency,
ADuM1100BR/ADuM1100UR only
50 MHz logic signal frequency,
ADuM1100BR/ADuM1100UR only
2.8
+10
II
VOH
−10
VDD2 − 0.1
VDD2 − 0.8
+0.01
5.0
4.6
0.0
0.03
0.3
μA
V
V
V
V
0 V ≤ VIN ≤ VDD1
Logic High Output Voltage
IO = −20 ꢀA, VI = VIH
IO = −4 mA, VI = VIH
IO = 20 ꢀA, VI = VIL
IO = 400 ꢀA, VI = VIL
IO = 4 mA, VI = VIL
Logic Low Output Voltage
VOL
0.1
0.1
0.8
V
SWITCHING SPECIFICATIONS
For ADuM1100AR
Minimum Pulse Width2
Maximum Data Rate3
For ADuM1100BR/ADuM1100UR
Minimum Pulse Width2
Maximum Data Rate3
For All Grades
PW
PW
40
10
ns
Mbps
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
25
6.7
150
ns
Mbps
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
100
Propagation Delay Time to Logic Low tPHL
Output4, 5 (See Figure 7)
10.5
10.5
18
18
2
ns
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Propagation Delay Time to Logic High
tPLH
Output4, 5 (See Figure 7)
5
Pulse Width Distortion |tPLH − tPHL
|
PWD
0.5
3
ns
ps/°C
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Change vs. Temperature6
Propagation Delay Skew
(Equal Temperature)5, 7
tPSK1
tPSK2
tR, tF
8
6
Propagation Delay Skew
ns
CL = 15 pF, CMOS signal levels
(Equal Temperature, Supplies)5, 7
Output Rise/Fall Time
3
ns
CL = 15 pF, CMOS signal levels
Common-Mode Transient Immunity
at Logic Low/High Output8
|CML|,
|CMH|
25
35
kV/μs
VI = 0 V or VDD1, VCM = 1000 V,
transient magnitude = 800 V
Refresh Rate
fr
1.2
Mbps
Input Dynamic Supply Current9
Output Dynamic Supply Current9
IDDI (D)
IDDO (D)
0.09
0.02
mA/Mbps
mA/Mbps
Rev. I | Page 4 of 20
Data Sheet
ADuM1100
1 Output supply current values are with no output load present. See Figure 5 and Figure 6 for information on supply current variation with logic signal frequency. See
the Power Consumption section for guidance on calculating the input and output supply currents for a given data rate and output load.
2 The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed.
3 The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed.
4 tPHL is measured from the 50% level of the falling edge of the VI signal to the 50% level of the falling edge of the VO signal. tPLH is measured from the 50% level of the
rising edge of the VI signal to the 50% level of the rising edge of the VO signal.
5 Because the input thresholds of the ADuM1100 are at voltages other than the 50% level of typical input signals, the measured propagation delay and pulse width
distortion can be affected by slow input rise/fall times. See the Propagation Delay-Related Parameters section and Figure 14 through Figure 18 for information on the
impact of given input rise/fall times on these parameters.
6 Pulse width distortion change vs. temperature is the absolute value of the change in pulse width distortion for a 1°C change in operating temperature.
7 tPSK1 is the magnitude of the worst-case difference in tPHL and/or tPLH that is measured between units at the same operating temperature and output load within the
recommended operating conditions. tPSK2 is the magnitude of the worst-case difference in tPHL and/or tPLH that is measured between units at the same operating
temperature, supply voltages, and output load within the recommended operating conditions.
8 CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate
that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling edges. The transient magnitude is the range
over which the common mode is slewed.
9 Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See Figure 5 and Figure 6 for information on
supply current variation with logic signal frequency. See the Power Consumption section for guidance on calculating the input and output supply currents for a given
data rate and output load.
Rev. I | Page 5 of 20
ADuM1100
Data Sheet
ELECTRICAL SPECIFICATIONS—3.3 V OPERATION
All voltages are relative to their respective ground. 3.0 V ≤ VDD1 ≤ 3.6 V, 3.0 V ≤ VDD2 ≤ 3.6 V. All minimum/maximum specifications apply
over the entire recommended operation range, unless otherwise noted. All typical specifications are at TA = 25°C, VDD1 = VDD2 = 3.3 V.
Table 2.
Parameter
Symbol
Min
Typ
Max
Unit
Test Conditions
DC SPECIFICATIONS
Input Supply Current
Output Supply Current
Input Supply Current (25 Mbps)
(See Figure 5)
IDD1 (Q)
IDD2 (Q)
IDD1 (25)
0.1
0.005
2.0
0.3
0.04
2.8
mA
mA
mA
VI = 0 V or VDD1
VI = 0 V or VDD1
12.5 MHz logic signal frequency
Output Supply Current1 (25 Mbps)
(See Figure 6)
Input Supply Current (50 Mbps)
(See Figure 5)
Output Supply Current1 (50 Mbps)
(See Figure 6)
Input Current
IDD2 (25)
IDD1 (50)
IDD2 (50)
0.3
4.0
1.2
0.7
6.0
1.6
+10
mA
mA
mA
12.5 MHz logic signal frequency
25 MHz logic signal frequency,
ADuM1100BR/ADuM1100UR only
25 MHz logic signal frequency,
ADuM1100BR/ADuM1100UR only
II
VOH
−10
VDD2 − 0.1
VDD2 − 0.5
+0.01
3.3
3.0
0.0
0.04
0.3
μA
V
V
V
V
0 V ≤ VIN ≤ VDD1
Logic High Output Voltage
IO = −20 ꢀA, VI = VIH
IO = −2.5 mA, VI = VIH
IO = 20 ꢀA, VI = VIH
IO = 400 ꢀA, VI = VIH
IO = 2.5 mA, VI = VIH
Logic Low Output Voltage
VOL
0.1
0.1
0.4
V
SWITCHING SPECIFICATIONS
For ADuM1100AR
Minimum Pulse Width2
Maximum Data Rate3
For ADuM1100BR/ADuM1100UR
Minimum Pulse Width2
Maximum Data Rate3
For All Grades
PW
PW
40
20
ns
Mbps
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
25
50
10
100
ns
Mbps
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Propagation Delay Time to Logic Low tPHL
Output4, 5 (See Figure 8)
14.5
15.0
28
28
3
ns
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Propagation Delay Time to Logic
High Output4, 5 (See Figure 8)
tPLH
5
Pulse Width Distortion |tPLH − tPHL
|
PWD
0.5
10
ns
ps/°C
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Change vs. Temperature6
Propagation Delay Skew
(Equal Temperature)5, 7
tPSK1
tPSK2
tR, tF
15
12
Propagation Delay Skew
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
(Equal Temperature, Supplies)5, 7
Output Rise/Fall Time
3
ns
Common-Mode Transient Immunity
at Logic Low/High Output8
|CML|,
|CMH|
25
35
kV/μs
VI = 0 V or VDD1, VCM = 1000 V,
transient magnitude = 800 V
Refresh Rate
fr
1.1
Mbps
Input Dynamic Supply Current9
Output Dynamic Supply Current9
IDDI (D)
IDDO (D)
0.08
0.04
mA/Mbps
mA/Mbps
Rev. I | Page 6 of 20
Data Sheet
ADuM1100
1 Output supply current values are with no output load present. See Figure 5 and Figure 6 for information on supply current variation with logic signal frequency. See
the Power Consumption section for guidance on calculating the input and output supply currents for a given data rate and output load.
2 The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed.
3 The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed.
4 tPHL is measured from the 50% level of the falling edge of the VI signal to the 50% level of the falling edge of the VO signal. tPLH is measured from the 50% level of the
rising edge of the VI signal to the 50% level of the rising edge of the VO signal.
5 Because the input thresholds of the ADuM1100 are at voltages other than the 50% level of typical input signals, the measured propagation delay and pulse width
distortion can be affected by slow input rise/fall times. See the Propagation Delay-Related Parameters section and Figure 14 through Figure 18 for information on the
impact of given input rise/fall times on these parameters.
6 Pulse width distortion change vs. temperature is the absolute value of the change in pulse width distortion for a 1°C change in operating temperature.
7 tPSK1 is the magnitude of the worst-case difference in tPHL and/or tPLH that is measured between units at the same operating temperature and output load within the
recommended operating conditions. tPSK2 is the magnitude of the worst-case difference in tPHL and/or tPLH that is measured between units at the same operating
temperature, supply voltages, and output load within the recommended operating conditions.
8 CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate
that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling edges. The transient magnitude is the range
over which the common mode is slewed.
9 Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See Figure 5 and Figure 6 for information on
supply current variation with logic signal frequency. See the Power Consumption section for guidance on calculating the input and output supply currents for a given
data rate and output load.
Rev. I | Page 7 of 20
ADuM1100
Data Sheet
ELECTRICAL SPECIFICATIONS—MIXED 5 V/3 V OR 3 V/5 V OPERATION
All voltages are relative to their respective ground. 5 V/3 V operation: 4.5 V ≤ VDD1 ≤ 5.5 V, 3.0 V ≤ VDD2 ≤ 3.6 V. 3 V/5 V operation:
7 ≤ VDD1 ≤ 3.6 V, 4.5 V ≤ VDD2 ≤ 5.5 V. All minimum/maximum specifications apply over the entire recommended operation range,
VOMFTT otherwise noted. All typical specifications are at TA = 25°C, VDD1 = 3.3 V, VDD2 = 5 V or VDD1 = 5 V, VDD2 = 3.3 V.
Table 3.
Parameter
Symbol
Min
Typ
Max
Unit
Test Conditions
DC SPECIFICATIONS
Input Supply Current, Quiescent
5 V/3 V Operation
IDDI (Q)
0.3
0.1
0.8
0.3
mA
mA
3 V/5 V Operation
Output Supply Current, Quiescent
5 V/3 V Operation
3 V/5 V Operation
Input Supply Current, 25 Mbps
5 V/3 V Operation
3 V/5 V Operation
Output Supply Current1, 25 Mbps
5 V/3 V Operation
3 V/5 V Operation
Input Supply Current, 50 Mbps
5 V/3 V Operation
3 V/5 V Operation
Output Supply Current1, 50 Mbps
IDDO (Q)
IDDI (25)
IDDO (25)
IDDI (50)
IDDO (50)
0.005
0.01
0.04
0.06
mA
mA
2.2
2.0
3.5
2.8
mA
mA
12.5 MHz logic signal frequency
12.5 MHz logic signal frequency
0.3
0.5
0.7
1.0
mA
mA
12.5 MHz logic signal frequency
12.5 MHz logic signal frequency
4.5
4.0
7.0
6.0
mA
mA
25 MHz logic signal frequency
25 MHz logic signal frequency
5 V/3 V Operation
3 V/5 V Operation
Input Currents
Logic High Output Voltage
5 V/3 V Operation
1.2
1.0
+0.01
3.3
3.0
0.0
0.04
0.3
1.6
1.5
+10
mA
mA
ꢀA
V
V
V
25 MHz logic signal frequency
25 MHz logic signal frequency
0 V ≤ VIA, VIB, VIC, VID ≤ VDD1 or VDD2
IO = −20 ꢀA, VI = VIH
IO = −2.5 mA, VI = VIH
IO = 20 ꢀA, VI = VIL
IIA
VOH
−10
VDD2 − 0.1
VDD2 − 0.5
Logic Low Output Voltage
5 V/3 V Operation
VOL
0.1
0.1
0.4
V
V
IO = 400 ꢀA, VI = VIL
IO = 2.5 mA, VI = VIL
Logic High Output Voltage
3 V/5 V Operation
Logic Low Output Voltage
3 V/5 V Operation
VOH
VOL
VDD2 − 0.1
VDD2 − 0.8
5.0
4.6
0.0
0.03
0.3
V
V
V
V
IO = −20 ꢀA, VI = VIH
IO = −4 mA, VI = VIH
IO = 20 ꢀA, VI = VIL
IO = 400 ꢀA, VI = VIL
0.1
0.1
0.8
V
IO = 4 mA, VI = VIL
SWITCHING SPECIFICATIONS
For ADuM1100AR
Minimum Pulse Width2
Maximum Data Rate3
For ADuM1100BR/ADuM1100UR
Minimum Pulse Width2
Maximum Data Rate3
For All Grades
PW
40
20
ns
Mbps
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
25
50
PW
ns
Mbps
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Propagation Delay Time to Logic
Low/High Output4, 5
tPHL, tPLH
5 V/3 V Operation (See Figure 9)
3 V/5 V Operation (See Figure 10)
13
16
21
26
ns
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Rev. I | Page 8 of 20
Data Sheet
ADuM1100
Parameter
Symbol
Min
Typ
Max
Unit
Test Conditions
5
Pulse Width Distortion, |tPLH − tPHL
|
PWD
5 V/3 V Operation
3 V/5 V Operation
0.5
0.5
2
3
ns
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Change in Pulse Width Distortion vs.
Temperature6
5 V/3 V Operation
3 V/5 V Operation
3
10
ps/°C
ps/°C
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Propagation Delay Skew (Equal
Temperature)5, 7
5 V/3 V Operation
3 V/5 V Operation
Propagation Delay Skew (Equal
Temperature, Supplies)5, 7
5 V/3 V Operation
tPSK1
tPSK2
tR, tF
12
15
ns
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
9
12
ns
ns
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
3 V/5 V Operation
Output Rise/Fall Time (10% to 90%)
3
Common-Mode Transient Immunity at
Logic Low/High Output8
|CML|,
|CMH|
25
35
kV/μs
VI = 0 V or VDD1, VCM = 1000 V,
transient magnitude = 800 V
Refresh Rate
fr
5 V/3 V Operation
3 V/5 V Operation
Input Dynamic Supply Current9
1.2
1.1
Mbps
Mbps
CPD1
5 V/3 V Operation
3 V/5 V Operation
Output Dynamic Supply Current9
0.09
0.08
mA/Mbps
mA/Mbps
CPD2
5 V/3 V Operation
3 V/5 V Operation
0.04
0.02
mA/Mbps
mA/Mbps
1 Output supply current values are with no output load present. See Figure 5 and Figure 6 for information on supply current variation with logic signal frequency. See
the Power Consumption section for guidance on calculating the input and output supply currents for a given data rate and output load.
2 The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed.
3 The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed.
4 tPHL is measured from the 50% level of the falling edge of the VI signal to the 50% level of the falling edge of the VO signal. tPLH is measured from the 50% level of the
rising edge of the VI signal to the 50% level of the rising edge of the VO signal.
5 Because the input thresholds of the ADuM1100 are at voltages other than the 50% level of typical input signals, the measured propagation delay and pulse width
distortion can be affected by slow input rise/fall times. See the Propagation Delay-Related Parameters section and Figure 14 through Figure 18 for information on the
impact of given input rise/fall times on these parameters.
6 Pulse width distortion change vs. temperature is the absolute value of the change in pulse width distortion for a 1°C change in operating temperature.
7 tPSK1 is the magnitude of the worst-case difference in tPHL and/or tPLH that is measured between units at the same operating temperature and output load within the
recommended operating conditions. tPSK2 is the magnitude of the worst-case difference in tPHL and/or tPLH that is measured between units at the same operating
temperature, supply voltages, and output load within the recommended operating conditions.
8 CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate
that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling edges. The transient magnitude is the range
over which the common mode is slewed.
9 Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See Figure 5 and Figure 6 for information on
supply current variation with logic signal frequency. See the Power Consumption section for guidance on calculating the input and output supply currents for a given
data rate and output load.
Rev. I | Page 9 of 20
ADuM1100
Data Sheet
PACKAGE CHARACTERISTICS
Table 4.
Parameter
Symbol
RI-O
CI-O
CI
θJCI
Min Typ Max Unit
Test Conditions
Resistance (Input-to-Output)1
Capacitance (Input-to-Output)1
Input Capacitance2
1012
1.0
4.0
46
Ω
pF
pF
f = 1 MHz
IC Junction-to-Case Thermal Resistance, Side 1
IC Junction-to-Case Thermal Resistance, Side 2
°C/W Thermocouple located at
center of package underside
θJCO
41
°C/W
Package Power Dissipation
PPD
240
mW
1 The device is considered a 2-terminal device; Pin 1, Pin 2, Pin 3, and Pin 4 are shorted together, and Pin 5, Pin 6, Pin 7, and Pin 8 are shorted together.
2 Input capacitance is measured at Pin 2 (VI).
REGULATORY INFORMATION
The ADuM1100 is approved by the following organizations.
Table 5.
UL
CSA
VDE
Recognized under 1577
Approved under CSA Component
Acceptance Notice #5A
Certified according to DIN V VDE V
0884-10 (VDE V 0884-10):2006-122
component recognition program1
Single/basic insulation,
2500 V rms isolation voltage
Basic insulation per CSA 60950-1-03 and IEC 60950-1,
400 V rms (565 V peak) maximum working voltage
Reinforced insulation, 560 V peak
File E214100
File 205078
File 2471900-4880-0001
1 In accordance with UL 1577, each ADuM1100 is proof tested by applying an insulation test voltage ≥3000 V rms for 1 sec (current leakage detection limit = 5 μA).
2 In accordance with DIN V VDE V 0884-10, each ADuM1100 is proof tested by applying an insulation test voltage ≥1050 V peak for 1 sec (partial discharge detection
limit = 5 pC). The * marking branded on the component designates DIN V VDE V 0884-10 approval.
INSULATION AND SAFETY-RELATED SPECIFICATIONS
Table 6.
Parameter
Symbol
Value
Unit
Conditions
Minimum External Air Gap (Clearance)
L(I01)
4.90 min
mm
Measured from input terminals to output terminals,
shortest distance through air
Minimum External Tracking (Creepage)
L(I02)
4.01 min
mm
Measured from input terminals to output terminals,
shortest distance path along body
Minimum Internal Gap (Internal Clearance)
Tracking Resistance (Comparative Tracking Index) CTI
Isolation Group
Maximum Working Voltage Compatible with
50 Years Service Life
0.016 min mm
Insulation distance through insulation
DIN IEC 112/VDE 0303 Part 1
Material Group (DIN VDE 0110, 1/89, Table I)
Continuous peak voltage across the isolation barrier
>175
IIIa
V
VIORM
565
V peak
Rev. I | Page 10 of 20
Data Sheet
ADuM1100
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 INSULATION CHARACTERISTICS
This isolator is suitable for reinforced isolation only within the safety limit data. Maintenance of the safety data is ensured by means of
protective circuits. The asterisk (*) marking on the package denotes DIN V VDE V 0884-10 approval for 560 V peak working voltage.
Table 7.
Description
Conditions
Symbol Characteristic
Unit
Installation Classification per DIN VDE 0110
For Rated Mains Voltage ≤ 150 V rms
For Rated Mains Voltage ≤ 300 V rms
For Rated Mains Voltage ≤ 400 V rms
Climatic Classification
Pollution Degree per DIN VDE 0110, Table 1
Maximum Working Insulation Voltage
Input-to-Output Test Voltage, Method B1
I to IV
I to III
I to II
40/105/21
2
VIORM
VPR
560
1050
V peak
V peak
VIORM × 1.875 = VPR, 100% production test,
tm = 1 sec, partial discharge < 5 pC
Input-to-Output Test Voltage, Method A
VIORM × 1.6 = VPR, tm = 60 sec, partial
discharge < 5 pC
VPR
After Environmental Tests Subgroup 1
After Input and/or Safety Test Subgroup 2 and Subgroup 3
896
672
V peak
V peak
VIORM × 1.2 = VPR, tm = 60 sec, partial
discharge < 5 pC
Highest Allowable Overvoltage
Safety-Limiting Values
Transient overvoltage, tTR = 10 seconds
Maximum value allowed in the event of
a failure (see Figure 2)
VTR
4000
V peak
Case Temperature
Side 1 Current
Side 2 Current
TS
IS1
IS2
RS
150
160
170
>109
°C
mA
mA
Ω
Insulation Resistance at TS
VIO = 500 V
180
160
RECOMMENDED OPERATING CONDITIONS
Table 8.
Parameter
140
Symbol Min Max Unit
OUTPUT CURRENT
120
Operating Temperature
ADuM1100AR/ADuM1100BR TA
−40 +105 °C
−40 +125 °C
100
INPUT CURRENT
ADuM1100UR
Supply Voltages1
TA
VDD1
80
60
40
20
0
,
3.0
5.5
V
VDD2
Logic High Input Voltage,
5 V Operation1, 2
(See Figure 11 and Figure 12)
VIH
VIL
VIH
VIL
2.0
VDD1
V
Logic Low Input Voltage,
0.0
1.5
0.0
0.8
VDD1
0.5
1.0
V
5 V Operation1, 2
0
50
100
150
200
CASE TEMPERATURE (°C)
(See Figure 11 and Figure 12)
Figure 2. Thermal Derating Curve, Dependence of Safety-Limiting Values
with Case Temperature per DIN V VDE V 0884-10
Logic High Input Voltage,
V
3.3 V Operation1, 2
(See Figure 11 and Figure 12)
Logic Low Input Voltage,
V
3.3 V Operation1, 2
(See Figure 11 and Figure 12)
Input Signal Rise and Fall Times
ms
1 All voltages are relative to their respective ground.
2 Input switching thresholds have 300 mV of hysteresis. See the Method of
Operation, DC Correctness, and Magnetic Field Immunity section, Figure 19,
and Figure 20 for information on immunity to external magnetic fields.
Rev. I | Page 11 of 20
ADuM1100
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Table 9.
Parameter
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Symbol Min
Max
+150
+125
Unit
°C
°C
Storage Temperature
TST
TA
−55
−40
Ambient Operating
Temperature
Supply Voltages1
VDD1, VDD2 −0.5
+6.5
V
V
V
Input Voltage1
VI
VO
−0.5
−0.5
VDD1 + 0.5
VDD2 + 0.5
Output Voltage1
Average Current, per Pin2
Temperature ≤ 105°C
Temperature ≤ 125°C
Input Current
ESD CAUTION
−25
+25
mA
−7
+7
mA
Output Current
−20
+20
mA
Common-Mode Transients3
−100 +100
kV/μs
1 All voltages are relative to their respective ground.
2 See Figure 2 for information on maximum allowable current for various
temperatures.
3 Refers to common-mode transients across the insulation barrier.
Common-mode transients exceeding the Absolute Maximum Rating
may cause latch-up or permanent damage.
Table 10. Truth Table (Positive Logic)
VI Input
VDD1 State
VDD2 State
VO Output
H
L
X
X
Powered
Powered
Unpowered
Powered
Powered
Powered
Powered
Unpowered
H
L
H1
X1
1 VO returns to VI state within 1 ꢀs of power restoration.
Figure 3 shows the package branding. The asterisk (*) is the DIN EN 60747-5-2 mark, R is the package designator (R denotes SOIC_N),
YYWW is the date code, and XXXXXX is the lot code.
ADuM1100AR,
ADuM1100AR-RL7
ADuM1100BR,
ADuM1100BR-RL7
ADuM1100UR,
ADuM1100UR-RL7
8
8
8
AD1100A
R YYWW*
XXXXXX
AD1100B
R YYWW*
XXXXXX
AD1100U
R YYWW*
XXXXXX
1
1
1
Figure 3. Package Branding
Rev. I | Page 12 of 20
Data Sheet
ADuM1100
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
1
V
1
2
3
4
8
7
6
5
V
DD2
DD1
2
2
ADuM1100
V
GND
I
2
TOP VIEW
1
V
V
DD1
O
(Not to Scale)
GND
GND
1
2
1
2
PIN 1 AND PIN 3 ARE INTERNALLY CONNECTED. EITHER OR BOTH
MAY BE USED FOR V
.
DD1
PIN 5 AND PIN 7 ARE INTERNALLY CONNECTED. EITHER OR BOTH
MAY BE USED FOR GND .
2
Figure 4. Pin Configuration
Table 11. Pin Function Descriptions
Pin No.
Mnemonic
Description
1
2
3
4
5
6
7
8
VDD1
VI
VDD1
GND1
GND2
VO
GND2
VDD2
Input Supply Voltage, 3.0 V to 5.5 V.
Logic Input.
Input Supply Voltage, 3.0 V to 5.5 V.
Input Ground Reference.
Output Ground Reference.
Logic Output.
Output Ground Reference.
Output Supply Voltage, 3.0 V to 5.5 V.
Rev. I | Page 13 of 20
ADuM1100
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
20
18
16
14
12
10
18
17
16
15
14
13
12
tPHL
tPLH
8
5V
6
3.3V
4
2
0
0
25
50
75
100
125
150
–50
–25
0
25
50
75
100
125
DATA RATE (Mbps)
TEMPERATURE (°C)
Figure 5. Typical Input Supply Current vs. Logic Signal Frequency
for 5 V and 3.3 V Operation
Figure 8. Typical Propagation Delays vs. Temperature, 3.3 V Operation
14
13
5
4
tPLH
12
3
5V
tPHL
11
2
3.3V
10
9
1
0
–50
–25
0
25
50
75
100
125
0
25
50
75
100
125
150
DATA RATE (Mbps)
TEMPERATURE (°C)
Figure 6. Typical Output Supply Current vs. Logic Signal Frequency
for 5 V and 3.3 V Operation
Figure 9. Typical Propagation Delays vs. Temperature, 5 V/3 V Operation
13
18
17
12
16
tPHL
11
15
tPLH
tPLH
tPHL
14
13
12
10
9
–50
–25
0
25
50
75
100
125
–50
–25
0
25
50
75
100
125
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 7. Typical Propagation Delays vs. Temperature, 5 V Operation
Figure 10. Typical Propagation Delays vs. Temperature, 3 V/5 V Operation
Rev. I | Page 14 of 20
Data Sheet
ADuM1100
1.4
1.3
1.2
1.1
1.0
0.9
0.8
1.7
1.6
1.5
1.4
1.3
1.2
–40°C
+25°C
–40°C
+25°C
+125°C
+125°C
1.1
3.0
3.0
3.5
4.0
4.5
5.0
(V)
5.5
3.5
4.0
4.5
5.0
(V)
5.5
INPUT SUPPLY VOLTAGE, V
INPUT SUPPLY VOLTAGE, V
DD1
DD1
Figure 11. Typical Input Voltage Switching Threshold,
Low-to-High Transition
Figure 12. Typical Input Voltage Switching Threshold,
High-to-Low Transition
Rev. I | Page 15 of 20
ADuM1100
Data Sheet
APPLICATION INFORMATION
PC BOARD LAYOUT
Pulse width distortion is the maximum difference between
PLH and tPHL and provides an indication of how accurately the
t
The ADuM1100 digital isolator requires no external interface
circuitry for the logic interfaces. A bypass capacitor is recom-
mended at the input and output supply pins. The input bypass
capacitor can conveniently be connected between Pin 3 and
Pin 4 (see Figure 13). Alternatively, the bypass capacitor can be
located between Pin 1 and Pin 4. The output bypass capacitor
can be connected between Pin 7 and Pin 8 or Pin 5 and Pin 8.
The capacitor value should be between 0.01 μF and 0.1 μF. The
total lead length between both ends of the capacitor and the
power supply pins should not exceed 20 mm.
input signal’s timing is preserved in the component’s output
signal. Propagation delay skew is the difference between the
minimum and maximum propagation delay values among
multiple ADuM1100 components operated at the same
operating temperature and having the same output load.
Depending on the input signal rise/fall time, the measured
propagation delay based on the input 50% level can vary from
the true propagation delay of the component (as measured from
its input switching threshold). This is because the input threshold,
as is the case with commonly used optocouplers, is at a different
voltage level than the 50% point of typical input signals. This
propagation delay difference is given by
V
V
DD1
DD2
V (DATA IN)
I
(OPTIONAL)
V
O
(DATA OUT)
GND
1
GND
2
Δ
LH = t′PLH − tPLH = (tR/0.8 VI)(0.5 VI − VITH (L-H)
HL = t′PHL − tPHL = (tF/0.8 VI)(0.5 VI − VITH (H-L)
)
Figure 13. Recommended Printed Circuit Board Layout
See the AN-1109 Application Note for board layout guidelines.
PROPAGATION DELAY-RELATED PARAMETERS
Δ
)
where:
t
PLH and tPHL are the propagation delays as measured from the
Propagation delay time describes the length of time it takes for
a logic signal to propagate through a component. Propagation
delay time to logic low output and propagation delay time to
logic high output refer to the duration between an input
signal transition and the respective output signal transition
(see Figure 14).
input 50% level.
t’PLH and t’PHL are the propagation delays as measured from the
input switching thresholds.
tR and tF are the input 10% to 90% rise/fall times.
VI is the amplitude of the input signal (0 V to VI levels assumed).
V
ITH (L–H) and VITH (H–L) are the input switching thresholds.
INPUT (V )
50%
I
tPLH
tPHL
OUTPUT (V
)
50%
O
Figure 14. Propagation Delay Parameters
∆
∆
HL
LH
V
I
V
50%
ITH(L–H)
V
ITH(H–L)
tPLH
t'PHL
INPUT (V )
I
tPHL
t'PLH
50%
OUTPUT (V
)
O
Figure 15. Impact of Input Rise/Fall Time on Propagation Delay
Rev. I | Page 16 of 20
Data Sheet
ADuM1100
4
6
5
4
3
2
1
0
3
2
1
0
5V INPUT SIGNAL
5V INPUT SIGNAL
3.3V INPUT SIGNAL
3.3V INPUT SIGNAL
9
1
2
3
4
5
6
7
8
10
9
1
2
3
4
5
6
7
8
10
INPUT RISE TIME (10%–90%, ns)
INPUT RISE/FALL TIME (10%–90%, ns)
Figure 16. Typical Propagation Delay Change Due to
Input Rise Time Variation (for VDD1 = 3.3 V and 5 V)
Figure 18. Typical Pulse Width Distortion Adjustment Due to
Input Rise/Fall Time Variation (for VDD1 = 3.3 V and 5 V)
METHOD OF OPERATION, DC CORRECTNESS, AND
MAGNETIC FIELD IMMUNITY
0
–1
–2
–3
–4
The two coils in Figure 1 act as a pulse transformer. Positive
and negative logic transitions at the isolator input cause narrow
(2 ns) pulses to be sent via the transformer to the decoder. The
decoder is bistable and therefore either set or reset by the pulses
indicating input logic transitions. In the absence of logic transi-
tions at the input for more than ~1 ꢀs, a periodic update pulse
of the appropriate polarity is sent to ensure dc correctness at the
output. If the decoder receives none of these update pulses for
more than about 5 ꢀs, the input side is assumed to be unpowered
or nonfunctional, in which case the isolator output is forced to
a logic high state by the watchdog timer circuit.
5V INPUT SIGNAL
3.3V INPUT SIGNAL
9
1
2
3
4
5
6
7
8
10
INPUT RISE TIME (10%–90%, ns)
The limitation on the magnetic field immunity of the
ADuM1100 is set by the condition in which induced voltage in
the transformer’s receiving coil is sufficiently large to either
falsely set or reset the decoder. The analysis that follows defines
the conditions under which this can occur. The 3.3 V operating
condition of the ADuM1100 is examined because it represents
the most susceptible mode of operation.
Figure 17. Typical Propagation Delay Change Due to
Input Fall Time Variation (for VDD1 = 3.3 V and 5 V)
The impact of the slower input edge rates can also affect the
measured pulse width distortion as based on the input 50%
level. This impact can either increase or decrease the apparent
pulse width distortion depending on the relative magnitudes of
PHL, tPLH, and PWD. The case of interest here is the condition
that leads to the largest increase in pulse width distortion. The
change in this case is given by
t
The pulses at the transformer output are greater than 1.0 V in
amplitude. The decoder has sensing thresholds at about 0.5 V,
therefore establishing a 0.5 V margin in which induced voltages
can be tolerated. The voltage induced across the receiving coil
is given by
Δ
PWD = PWD′ − PWD = ΔLH − ΔHL
(t/0.8 VI)(V − VITH (L-H) − VITH (H-L)), (for t = tR = tF)
where:
=
2
V = (−dβ/dt) ∑π rn , n = 1, 2, . . . , N
PWD = |tPLH − tPHL|.
PWD’ = |t’PLH − t’PHL|.
where:
β is the magnetic flux density (gauss).
N is the number of turns in the receiving coil.
rn is the radius of the nth turn in the receiving coil (cm).
This adjustment in pulse width distortion is plotted as a
function of input rise/fall time in Figure 18.
Rev. I | Page 17 of 20
ADuM1100
Data Sheet
1000
100
10
Given the geometry of the receiving coil in the ADuM1100 and
an imposed requirement that the induced voltage be at most
50% of the 0.5 V margin at the decoder, a maximum allowable
magnetic field is calculated, as shown in Figure 19.
100
DISTANCE = 1m
DISTANCE = 100mm
10
1
1
DISTANCE = 5mm
0.1
0.01
0.1
1k
10k
100k
1M
10M
100M
MAGNETIC FIELD FREQUENCY (Hz)
0.01
0.001
Figure 20. Maximum Allowable Current for
Various Current-to-ADuM1100 Spacings
Note that at combinations of strong magnetic field and high
frequency, any loops formed by printed circuit board traces
could induce sufficiently large error voltages to trigger the
thresholds of succeeding circuitry. Care should be taken in the
layout of such traces to avoid this possibility.
1k
10k
100k
1M
10M
100M
MAGNETIC FIELD FREQUENCY (Hz)
Figure 19. Maximum Allowable External Magnetic Field
For example, at a magnetic field frequency of 1 MHz, the
maximum allowable magnetic field of 0.2 kgauss induces a
voltage of 0.25 V at the receiving coil. This is about 50% of the
sensing threshold and does not cause a faulty output transition.
Similarly, if such an event were to occur during a transmitted
pulse (and was of the worst-case polarity), it would reduce the
received pulse from >1.0 V to 0.75 V, still well above the 0.5 V
sensing threshold of the decoder.
POWER CONSUMPTION
The supply current of the ADuM1100 isolator is a function of
the supply voltage, the input data rate, and the output load.
The input supply current is given by
I
I
DDI = IDDI (Q)
f ≤ 0.5fr
f > 0.5fr
DDI = IDDI (D) × (2f − fr) + IDDI (Q)
The preceding magnetic flux density values correspond to
specific current magnitudes at given distances away from the
ADuM1100 transformers. Figure 20 expresses these allowable
current magnitudes as a function of frequency for selected
distances. As can be seen, the ADuM1100 is extremely immune
and can be affected only by extremely large currents operated at
high frequency and very close to the component. For the 1 MHz
example noted, one would have to place a current of 0.5 kA
5 mm away from the ADuM1100 to affect the component’s
operation.
The output supply current is given by
I
I
DDO = IDDO (Q)
f ≤ 0.5fr
DDO = (IDDO (D) + (0.5 × 10−3) × CLVDDO) × (2f − fr) + IDDO (Q)
f > 0.5fr
where:
DDI (D), IDDO (D) are the input and output dynamic supply currents
per channel (mA/Mbps).
I
CL is the output load capacitance (pF).
V
DDO is the output supply voltage (V).
f is the input logic signal frequency (MHz, half the input data
rate, NRZ signaling).
fr is the input stage refresh rate (Mbps).
I
DDI (Q), IDDO (Q) are the specified input and output quiescent
supply currents (mA).
Rev. I | Page 18 of 20
Data Sheet
ADuM1100
OUTLINE DIMENSIONS
5.00 (0.1968)
4.80 (0.1890)
8
1
5
4
6.20 (0.2441)
5.80 (0.2284)
4.00 (0.1574)
3.80 (0.1497)
0.50 (0.0196)
0.25 (0.0099)
1.27 (0.0500)
BSC
45°
1.75 (0.0688)
1.35 (0.0532)
0.25 (0.0098)
0.10 (0.0040)
8°
0°
0.51 (0.0201)
0.31 (0.0122)
COPLANARITY
0.10
1.27 (0.0500)
0.40 (0.0157)
0.25 (0.0098)
0.17 (0.0067)
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS MS-012-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 21. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
ORDERING GUIDE
Maximum Data
Rate (Mbps)
Minimum
Pulse Width (ns)
Package
Option
Model1
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
ADuM1100AR
25
25
25
25
100
100
100
100
100
100
100
100
40
40
40
40
10
10
10
10
10
10
10
10
8-Lead SOIC_N
8-Lead SOIC_N, 1,000 Piece Reel
8-Lead SOIC_N
8-Lead SOIC_N, 1,000 Piece Reel
8-Lead SOIC_N
8-Lead SOIC_N, 1,000 Piece Reel
8-Lead SOIC_N
8-Lead SOIC_N, 1,000 Piece Reel
8-Lead SOIC_N
8-Lead SOIC_N, 1,000 Piece Reel
8-Lead SOIC_N
R-8
ADuM1100AR-RL7
ADuM1100ARZ
ADuM1100ARZ-RL7
ADuM1100BR
ADuM1100BR-RL7
ADuM1100BRZ
ADuM1100BRZ-RL7
ADuM1100UR
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
ADuM1100UR-RL7
ADuM1100URZ
ADuM1100URZ-RL7
8-Lead SOIC_N, 1,000 Piece Reel
1 Z = RoHS Compliant Part.
Rev. I | Page 19 of 20
ADuM1100
NOTES
Data Sheet
©2001–2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D02462-0-3/12(I)
Rev. I | Page 20 of 20
相关型号:
©2020 ICPDF网 联系我们和版权申明