AD9352-5 [ADI]

WiMAX/WiBro RF MxFE Transceiver; 的WiMAX / WiBro的RF收发器的MxFE
AD9352-5
型号: AD9352-5
厂家: ADI    ADI
描述:

WiMAX/WiBro RF MxFE Transceiver
的WiMAX / WiBro的RF收发器的MxFE

电信集成电路 电信电路
文件: 总2页 (文件大小:103K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
WiMAX/WiBro RF  
MxFE Transceiver  
AD9352  
FEATURES  
FUNCTIONAL BLOCK DIAGRAM  
RF transceiver with integrated ADCs and DACs  
IEEE 802.16 WiMAX/WiBro  
2.3 GHz to 2.7 GHz  
ADC  
ADC  
Rx  
TxNRx  
3.5 MHz < BW < 20 MHz  
Superior receiver sensitivity with NF 3.7 dB  
Highly linear and spectrally pure transmitter  
Tx EVM −38 dB  
SNR > 134 dB/Hz at FOFFSET > 22 MHz  
Tx power control  
DATA  
AD9352  
SYNC  
POWER  
DETECT  
DAC  
DAC  
SYNC_VALID  
Tx  
Σ
Range: 0 dB to 58 dB  
Resolution: 0.25 dB  
Autonomous AGC and Tx power control  
Automatic frequency correction < 0.012 ppm  
Integrated Frac-N synthesizer  
8 Hz LO step size  
CLK_OUT  
REF_XTAL  
CLK/LO  
SYNTH  
RADIO  
SWITCHING  
GPO  
CTRL  
LDOs  
Integrated phase noise < 0.4°rms  
CTRL AUX ADC AUX DAC  
APPLICATIONS  
Figure 1.  
WiMAX/WiBro/BWA  
GENERAL DESCRIPTION  
The AD9352 is a fully integrated transceiver for IEEE 802.16  
WiMAX and WiBro wireless network systems. The RF MxFE™  
combines the RF front-end with mixed-signal baseband enabling  
an easy-to-use digital interface to the baseband ASIC or FPGA.  
The AD9352 operates in the 2.3 GHz to 2.7 GHz range covering  
most of the licensed and unlicensed bands. Channel bandwidths  
of 3.5 MHz, 4.375 MHz, 5 MHz, 7 MHz, 8.75 MHz, 10 MHz,  
14 MHz, 17.5 MHz, and 20 MHz are supported.  
The highly linear transmit path has excellent spectral purity  
with sideband noise less than −134 dBc/Hz at 22 MHz offset  
and offers EVM of −38 dB at 0 dBm output power. The transmit  
power is detected by an accurate power detector and autono-  
mously controlled with a range of 58 dB and 0.25 dB steps. The  
output power can be calibrated at the factory by a single meas-  
urement.  
The reference frequency is produced by an internal crystal  
oscillator with a digital programmable frequency with 0.012 ppm  
resolution thus reducing the total bill of materials of the device.  
The direct-conversion receiver has state-of-the-art noise figure  
and linearity and requires no external components with the  
exception of a balun. The complete RF subsystem integrates an  
autonomous AGC loop and dc offset corrections, thus elimi-  
nating the need for high speed interaction with the baseband  
processor. The received signal strength indicator (RSSI) has  
over 80 dB of dynamic range with 0.5 dB resolution and is  
accessible via the serial interface.  
An internal auxiliary ADC and two auxiliary DACs are avail-  
able for system monitoring and control. Three general purpose  
I/Os are also included and can be register programmed or auto-  
matically sequenced by a user-defined state machine. Mode control  
is via a 4-wire serial port and four real-time I/O control pins.  
The AD9352 is powered from a single 3.3 V supply and contains  
on-chip LDOs for each function to eliminate external regula-  
tors. The AD9352 is packaged in a 9 mm × 9 mm, 64-lead LFCSP.  
The received signal is digitized with a high dynamic range  
12-bit ADC. Decimation and channel filters produce a 10-bit  
output signal at the appropriate sample rate determined by the  
bandwidth mode. The transmit path takes a 10-bit input data  
and interpolates before converting to the analog domain and  
upconverting to the carrier frequency.  
For more information on the AD9352, e-mail Analog Devices,  
Inc. at wimaxtransceivers@analog.com.  
Rev. Sp0  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2007 Analog Devices, Inc. All rights reserved.  
AD9352  
NOTES  
©2007 Analog Devices, Inc. All rights reserved. Trademarks and  
registered trademarks are the property of their respective owners.  
D06883F-0-8/07(Sp0)  
Rev. Sp0 | Page 2 of 2  

相关型号:

AD9353

WiMAX RF MxFE Transceiver
ADI

AD9353BCPZ

WiMAX RF MxFE Transceiver
ADI

AD9354

WiMAX/WiBro RF MxFE MISO Transceiver
ADI

AD9355

WiMAX/WiBro RF MxFE MISO Transceiver
ADI

AD9361

RF捷变收发器
ADI

AD9361BBCZ

RF Agile Transceiver
ADI

AD9361BBCZ-REEL

RF Agile Transceiver
ADI

AD9363

Radio frequency (RF) 2 × 2 transceiver with integrated 12-bit DACs and ADCs
ADI

AD9363ABCZ

Radio frequency (RF) 2 × 2 transceiver with integrated 12-bit DACs and ADCs
ADI

AD9363ABCZ-REEL

Radio frequency (RF) 2 × 2 transceiver with integrated 12-bit DACs and ADCs
ADI

AD9364

Point to point communication systems
ADI

AD9364BBCZ

1 x 1 RF Agile Transceiver
ADI