AD8664ARZ [ADI]

16V Low Cost, High Performance CMOS Rail-to-Rail Operational Amplifiers; 16V低成本,高性能CMOS轨至轨运算放大器
AD8664ARZ
型号: AD8664ARZ
厂家: ADI    ADI
描述:

16V Low Cost, High Performance CMOS Rail-to-Rail Operational Amplifiers
16V低成本,高性能CMOS轨至轨运算放大器

运算放大器
文件: 总5页 (文件大小:183K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
16V Low Cost, High Performance  
CMOS Rail-to-Rail  
a
Preliminary Technical Data  
Operational Amplifiers  
AD8661/AD8662/AD8664  
FEATURES  
PIN CONFIGURATIONS  
Low Offset Voltage: 75 µV max  
Low Input Bias Currents 1pA Max  
Single-Supply Operation: 5 to 16 Volts  
Dual-Supply Operation: +/- 2.5 to +/-8 Volts  
Low Noise: 10 nV/Hz  
8-Lead LFCSP  
(CP-8)  
3mm x 3mm  
8-Lead MSOP  
(RM-8)  
AD8662  
Wide Bandwidth: 4 MHz  
Unity Gain Stable  
APPLICATIONS  
Multi-pole Filters  
Sensors  
Medical Equipment  
Consumer Audio  
Photodiode amplification  
ADC driver  
8-Lead SO  
(R-8)  
14-Lead TSSOP  
(RU-14)  
GENERAL DESCRIPTION  
The AD8661, AD8662 and AD8664 are single, dual and quad  
rail-to-rail output single supply amplifiers that use Analog  
Devices’ patented DigiTrim® trimming technique to achieve  
low offset voltage. The AD8661 family features an extended  
operating range with supply voltages up to 16 V. They also  
feature low input bias currents, wide signal bandwidth, and low  
input voltage and current noise.  
AD8664  
AD8661  
The combination of low offsets, very low input bias currents,  
and wide supply range make these amplifiers useful in a wide  
variety of applications normally associated with much higher  
priced JFET amplifiers. Systems utilizing high impedance  
sensors, such as photo-diodes benefit from the combination of  
low input bias current, low noise, low offset and bandwidth.  
The wide operating voltage range matches today’s high  
performance ADCs and DACs. Audio applications and  
medical monitoring equipment can take advantage of the high  
input impedance, low voltage and current noise, wide  
bandwidth and the lack of “popcorn” noise (found in many  
other low input bias current amplifiers).  
8-Lead SO  
14-Lead SO  
(R-14)  
(R-8)  
AD8662  
AD8664  
The AD8661, AD8662 and AD8664 are specified over the  
extended industrial (-40° to +125°C) temperature range. The  
AD8661, single, is available in the tiny 8-lead LFCSP (MO-  
220) 3mm x 3mm and 8-lead SOIC package. The AD8662,  
dual, is available in the 8-lead micro-SOIC and narrow SOIC  
surface mount packages. The AD8664, quad, is available in  
14-lead TSSOP and narrow 14-pin SOIC packages.  
LFCSP, MSOP and TSSOP versions are available in tape and  
reel only.  
REV. PrA 10/5/2004  
Information furnished by Analog Devices is believed to be accurate and  
reliable. However, no responsibility is assumed by Analog Devices for its use,  
nor for any infringements of patents or other rights of third parties that may  
result from its use. No license is granted by implication or otherwise under any  
patent or patent rights of Analog Devices. Trademarks and registered  
trademarks are the property of their respective companies.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781/329-4700  
Fax: 781/326-8703  
www.analog.com  
© 2004 Analog Devices, Inc. All rights reserved.  
Preliminary Technical Data  
AD8661/AD8662/AD8664  
ELECTRICAL CHARACTERISTICS (VS=+5.0V, VCM = VS/2, TA=+25°C unless otherwise  
noted)  
Parameter  
Symbol  
Conditions  
Min  
Typ  
Max  
Units  
INPUT CHARACTERISTICS  
Offset Voltage  
VOS  
VSY = 8V, VCM = 3V  
75  
µV  
VCM = 0.1V to 3.0V  
-40°< TA < +85°C  
30  
300  
650  
µV  
µV  
-40°< TA < +125°C  
750  
µV  
Input Bias Current  
Input Offset Current  
IB  
0.3  
0.2  
1
pA  
pA  
pA  
-40°< TA < +85°C  
-40°< TA < +125°C  
50  
300  
IOS  
TBD  
20  
pA  
pA  
pA  
-40°< TA < +85°C  
-40°< TA < +125°C  
75  
Input Voltage Range  
Common-Mode Rejection Ratio  
tbd  
80  
3.0  
V
dB  
CMRR  
AVO  
VCM = 0.1V to 3.0V  
95  
100  
3
Large Signal Voltage Gain  
Offset Voltage Drift  
RL = 10 kVO= 0.5V to 4.5V  
70  
V/mV  
VOS/T  
10  
µV/°C  
OUTPUT CHARACTERISTICS  
Output Voltage High  
VOH  
IL = 1mA  
4.80  
4.80  
4.75  
4.85  
4.85  
V
V
V
IL = 10mA  
-40°C < TA < +125°C  
Output Voltage Low  
Output Current  
VOL  
VOL  
IL = 1mA  
60  
60  
120  
120  
150  
mV  
mV  
mV  
mA  
IL = 1mA  
-40°C < TA < +125°C  
IOUT  
±19  
Closed Loop Output Impedance ZOUT  
f=1 MHz, AV = 1  
65  
POWER SUPPLY  
Power Supply Rejection Ratio  
Supply Current/Amplifier  
PSRR  
ISY  
VS = 5 V to 16 V  
VO = 0V  
80  
95  
dB  
1.2  
1.8  
2.0  
mA  
mA  
-40°< TA < +125°C  
DYNAMIC PERFORMANCE  
Slew Rate  
SR  
ts  
RL =10 kΩ  
3
<1  
4
V/µs  
µs  
MHz  
Settling Time  
To 0.1%, 0 V to 1V step  
Gain Bandwidth Product  
Phase Margin  
GBP  
Øo  
CL = 15 pF  
60  
degrees  
NOISE PERFORMANCE  
Peak-to-Peak Noise  
Voltage Noise Density  
en p-p  
en  
f=0.1Hz to 10 Hz  
f=1kHz  
2.5  
12  
µV p-p  
nV/Hz  
Voltage Noise Density  
Current Noise Density  
en  
in  
nV/Hz  
pA/Hz  
f=10kHz  
10  
f=1kHz  
0.1  
-2-  
Rev PrA 10/5/04  
Preliminary Technical Data  
AD8661/AD8662/AD8664  
ELECTRICAL CHARACTERISTICS (VS=±8.0V, VCM = 0, TA=+25°C unless otherwise noted)  
Parameter  
Symbol  
Conditions  
Min  
Typ  
Max  
Units  
INPUT CHARACTERISTICS  
Offset Voltage  
VOS  
VSY = 8V, VCM = 3V  
75  
µV  
VCM = -8.1V to +6.0V  
-40°< TA < +85°C  
30  
300  
650  
µV  
µV  
-40°< TA < +125°C  
750  
µV  
Input Bias Current  
Input Offset Current  
IB  
0.3  
0.2  
1
pA  
pA  
pA  
-40°< TA < +85°C  
-40°< TA < +125°C  
50  
300  
IOS  
TBD  
20  
75  
6
pA  
pA  
pA  
-40°< TA < +85°C  
-40°< TA < +125°C  
Input Voltage Range  
Common-Mode Rejection Ratio  
Large Signal Voltage Gain  
tbd  
80  
70  
V
dB  
V/mV  
CMRR  
AVO  
VCM = -8.1V to +6.0V  
RL=10 kVO= -7.5V to+7.5V  
95  
85  
Offset Voltage Drift  
VOS/T  
3
10  
µV/°C  
OUTPUT CHARACTERISTICS  
Output Voltage High  
VOH  
IL = 1mA  
7.90  
7.6  
7.95  
7.7  
V
V
V
IL = 10mA  
-40°C < TA < +125°C  
7.4  
Output Voltage Low  
Output Current  
VOL  
IL = 1mA  
-7.97  
-7.8  
-7.93  
-7.7  
mV  
mV  
mV  
mA  
IL = 10mA  
-40°C < TA < +125°C  
-7.5  
IOUT  
±140  
Closed Loop Output Impedance ZOUT  
f=1 MHz, AV = 1  
45  
POWER SUPPLY  
Power Supply Rejection Ratio  
Supply Current/Amplifier  
PSRR  
ISY  
VS = 5V to 16V  
VO = 0V  
80  
95  
dB  
1.5  
1.8  
2.0  
mA  
mA  
-40°< TA < +125°C  
DYNAMIC PERFORMANCE  
Slew Rate  
SR  
ts  
RL =10 kΩ  
3
V/µs  
µs  
Settling Time  
To 0.1%, 0 V to 1V step  
<1  
Gain Bandwidth Product  
Phase Margin  
GBP  
Øo  
4
60  
MHz  
degrees  
CL = 15 pF  
NOISE PERFORMANCE  
Peak-to-Peak Noise  
Voltage Noise Density  
en p-p  
en  
f=0.1Hz to 10 Hz  
f=1kHz  
2.5  
12  
µV p-p  
nV/Hz  
Voltage Noise Density  
Current Noise Density  
en  
in  
nV/Hz  
pA/Hz  
f=10kHz  
10  
f=1kHz  
0.1  
-3-  
Rev PrA 10/5/04  
Preliminary Technical Data  
AD8661/AD8662/AD8664  
ABSOLUTE MAXIMUM RATINGS1  
Package Type  
θ
θ
JC  
JA  
Units  
Supply voltage.........................................................................+18V  
Input Voltage....................................................................Gnd to Vs  
Differential Input Voltage .......................................................±18V  
Output Short-Circuit Duration to Gnd2.....Observe Derating Curves  
Storage Temperature Range  
R, CP, RM, RU Package................................-65°C to +150°C  
Operating Temperature Range  
AD8661/AD8662/AD8664............................-40°C to +125°C  
Junction Temperature Range  
8-Pin LFCSP (CP)  
8-Pin microSOIC (RM)  
8-Pin SOIC (R)  
--  
°C/W  
°C/W  
°C/W  
210  
158  
45  
43  
14-Pin SOIC (R)  
120  
180  
36  
35  
°C/W  
°C/W  
14-Pin TSSOP (RU)  
NOTES  
1
Absolute maximum ratings apply at 25°C, unless otherwise noted.  
2
θ
is specified for the worst-case conditions, i.e., θ is specified for device soldered  
JA  
JA  
in circuit board for surface mount packages.  
R, CP, RM, RU Package................................-65°C to +150°C  
Lead Temperature Range (Soldering, 60 Sec)............. +300°C  
ORDERING GUIDE  
Temperature  
Range  
-40°C to +125°C  
-40°C to +125°C  
Package  
Package  
Option  
CP-8  
Branding  
Information  
Model  
AD8661ACP  
AD8661ARZ  
Description  
8-Pin LFCSP  
8-Pin SOIC  
R-8  
AD8662ARMZ -40°C to +125°C  
8-Pin micro-SOIC  
8-Pin SOIC  
14-Pin SOIC  
14-Pin TSSOP  
RM-8  
R-8  
R-14  
AD8662ARZ  
AD8664ARZ  
-40°C to +125°C  
-40°C to +125°C  
AD8664ARUZ -40°C to +125°C  
RU-14  
CAUTION  
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 1500 V  
readily accumulate on the human body and test equipment and can discharge without  
detection. Although this device features proprietary ESD protection circuitry, permanent  
damage may occur on devices subjected to high-energy electrostatic discharges.  
Therefore, proper ESD precautions are recommended to avoid performance degradation or  
loss of functionality.  
-4-  
Rev PrA 10/5/04  
Preliminary Technical Data  
AD8661/AD8662/AD8664  
OUTLINE DIMENSIONS  
8-Lead LFCSP  
(CP-8 Suffix)  
8-Lead SOIC  
(RM-8)  
14-Lead TSSOP  
(RU-14)  
8-Lead SO  
(R-8)  
14-Lead SO  
(R-14)  
-5-  
Rev PrA 10/5/04  

相关型号:

AD8664ARZ-REEL

Low Noise, Precision 16 V CMOS, Rail-to-Rail Operational Amplifiers
ADI

AD8664ARZ-REEL7

Low Noise, Precision 16 V CMOS, Rail-to-Rail Operational Amplifiers
ADI

AD8665

16 V, 4 MHz Rail-to-Rail Output Amplifiers
ADI

AD8665ARJZ-R2

16 V, 4 MHz Rail-to-Rail Output Amplifiers
ADI

AD8665ARJZ-REEL

16 V, 4 MHz Rail-to-Rail Output Amplifiers
ADI

AD8665ARJZ-REEL7

16 V, 4 MHz Rail-to-Rail Output Amplifiers
ADI

AD8665ARZ

16 V, 4 MHz Rail-to-Rail Output Amplifiers
ADI

AD8665ARZ-REEL

16 V, 4 MHz Rail-to-Rail Output Amplifiers
ADI

AD8665ARZ-REEL7

16 V, 4 MHz Rail-to-Rail Output Amplifiers
ADI

AD8665_15

16 V, 4 MHz RR0 Amplifiers
ADI

AD8666

16 V, 4 MHz Rail-to-Rail Output Amplifiers
ADI

AD8666ARMZ

16 V, 4 MHz RR0 Amplifiers
ADI