AD8221-EVAL [ADI]
Precision Instrumentation Amplifier; 精密仪表放大器器型号: | AD8221-EVAL |
厂家: | ADI |
描述: | Precision Instrumentation Amplifier |
文件: | 总20页 (文件大小:1116K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Precision Instrumentation Amplifier
AD8221
CONNECTION DIAGRAM
FEATURES
Available in space-saving MSOP package
Gain set with 1 external resistor (gain range 1 to 1000)
Wide power supply range: ±2.3 V to ±18 V
Temperature range for specified performance:
–40°C to +85°C
1
2
3
4
8
7
6
5
+V
–IN
S
R
R
V
OUT
G
G
REF
–V
+IN
S
AD8221
TOP VIEW
Operational up to 125°C1
EXCELLENT AC SPECIFICATONS
80 dB min CMRR to 10 kHz ( G = 1)
825 kHz –3 dB bandwidth (G = 1)
2 V/µs slew rate
Figure 1. SOIC and MSOP Connection Diagram
LOW NOISE
120
110
100
90
8 nV/√Hz, @ 1 kHz, max input voltage noise
0.25 µV p-p input noise (0.1 Hz to 10 Hz)
HIGH ACCURACY DC PERFORMANCE (AD8221BR)
90 dB min CMRR (G = 1)
25 µV max input offset voltage
0.3 µV/°C max input offset drift
0.4 nA max input bias current
AD8221
COMPETITOR 1
80
70
APPLICATIONS
Weigh scales
60
COMPETITOR 2
Industrial process controls
Bridge amplifiers
50
40
Precision data acquisition systems
Medical instrumentation
Strain gages
10
100
1k
10k
100k
FREQUENCY (Hz)
Figure 2. Typical CMRR vs. Frequency for G = 1
Transducer interfaces
GENERAL DESCRIPTION
Programmable gain affords the user design flexibility. A single
resistor sets the gain from 1 to 1000. The AD8221 operates on
both single and dual supplies, and is well suited for applications
where 10 V input voltages are encountered.
The AD8221 is a gain programmable, high performance instru-
mentation amplifier that delivers the industry’s highest CMRR
over frequency. The CMRR of instrumentation amplifiers on
the market today falls off at 200 Hz. In contrast, the AD8221
maintains a minimum CMRR of 80 dB to 10 kHz for all grades
at G = 1. High CMRR over frequency allows the AD8221 to
reject wideband interference and line harmonics, greatly
simplifying filter requirements. Possible applications include
precision data acquisition, biomedical analysis, and aerospace
instrumentation.
The AD8221 is available in low cost 8-lead SOIC and MSOP
packages, both of which offer the industry’s best performance.
The MSOP requires half the board space of the SOIC, making it
ideal for multichannel or space-constrained applications.
Performance is specified over the entire industrial temperature
range of –40°C to +85°C for all grades. Furthermore, the
AD8221 is operational from –40°C to +125°C1.
Low voltage offset, low offset drift, low gain drift, high gain
accuracy, and high CMRR make this part an excellent choice in
applications that demand the best dc performance possible,
such as bridge signal conditioning.
1 See Typical Performance Curves for expected operation from 85°C to 125°C.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com
© 2003 Analog Devices, Inc. All rights reserved.
AD8221
TABLE OF CONTENTS
Specifications..................................................................................... 3
Input Protection ......................................................................... 15
RF Interference ........................................................................... 16
Precision Strain Gage................................................................. 16
Absolute Maximum Ratings............................................................ 5
ESD Caution.................................................................................. 5
Typical Performance Characteristics ............................................. 6
Theory of Operation ...................................................................... 13
Gain Selection............................................................................. 14
Layout........................................................................................... 14
Reference Terminal .................................................................... 15
Power Supply Regulation and Bypassing ................................ 15
Input Bias Current Return Path................................................ 15
Conditioning 10 V Signals for a +5 V Differential Input
ADC ............................................................................................. 17
AC-Coupled Instrumentation Amplifier ................................ 17
Outline Dimensions....................................................................... 18
Ordering Guide .......................................................................... 18
REVISION HISTORY
Revision A
11/03—Data Sheet Changed from Rev. 0 to Rev. A
Change
Page
Changes to Features...............................................................................1
Changes to Specifications section .......................................................4
Change to Theory of Operation section...........................................13
Change to Gain Selection section......................................................14
Rev. A | Page 2 of 20
AD8221
SPECIFICATIONS
Table 1. VS = 15 V, VREF = 0 V, TA = +25°C, G = 1, RL = 2 kΩ, unless otherwise noted
AR Grade
BR Grade
ARM Grade
Parameter
Conditions
Min Typ Max Min Typ Max Min Typ Max Unit
COMMON-MODE
REJECTION RATIO (CMRR)
CMRR DC to 60 Hz with
1 kΩ Source Imbalance
VCM = –10 V to +10 V
G = 1
80
90
80
dB
dB
dB
dB
G = 10
100
120
130
110
130
140
100
120
130
G = 100
G = 1000
CMRR at 10 kHz
G = 1
VCM = –10 V to +10 V
80
80
80
dB
dB
dB
dB
G = 10
90
100
110
110
90
G = 100
G = 1000
100
100
100
100
eNI2 + (eNO/G)2
RTI noise = √
NOISE
Voltage Noise, 1 kHz
Input Voltage Noise, eNI
Output Voltage Noise, eNO
RTI
VIN+, VIN–, VREF = 0
f = 0.1 Hz to 10 Hz
8
8
8
nV/√Hz
nV/√Hz
75
75
75
G = 1
2
2
2
µV p-p
µV p-p
µV p-p
fA/√Hz
pA p-p
G = 10
0.5
0.25
40
6
0.5
0.25
40
6
0.5
0.25
40
6
G = 100 to 1000
Current Noise
f = 1 kHz
f = 0.1 Hz to 10 Hz
VOLTAGE OFFSET1
Input Offset, VOSI
Over Temperature
Average TC
VS = 5 V to 15 V
T = –40°C to +85°C
60
25
70
µV
86
45
135
0.9
600
1.00
9
µV
0.4
300
0.66
6
0.3
200
0.45
5
µV/°C
µV
Output Offset, VOSO
Over Temperature
Average TC
VS = 5 V to 15 V
T = –40°C to +85°C
mV
µV/°C
Offset RTI vs. Supply (PSR)
G = 1
VS = 2.3 V to 18 V
90
110
120
130
140
94
110
130
140
150
90
100
120
140
140
dB
dB
dB
dB
G = 10
110
124
130
114
130
140
100
120
120
G = 100
G = 1000
INPUT CURRENT
Input Bias Current
Over Temperature
Average TC
0.5
1.5
2.0
0.2
0.4
1
0.5
2
3
nA
T = –40°C to +85°C
T = –40°C to +85°C
nA
1
1
3
pA/°C
nA
Input Offset Current
Over Temperature
Average TC
0.2
0.6
0.8
0.1
0.4
0.6
0.3
1
1.5
nA
1
1
3
pA/°C
REFERENCE INPUT
RIN
20
50
20
50
20
50
kΩ
µA
V
IIN
VIN+, VIN–, VREF = 0
60
60
60
Voltage Range
Gain to Output
–VS
2.3
+VS
–VS
2.3
+VS
–VS
2.3
+VS
V/V
1 ± 0.0001
1 ± 0.0001
1 ± 0.0001
POWER SUPPLY
Operating Range
Quiescent Current
Over Temperature
VS = 2.3 V to 18 V
T = –40°C to +85°C
18
1
18
1
18
1
V
0.9
1
0.9
1
0.9
1
mA
mA
1.2
1.2
1.2
Rev. A | Page 3 of 20
AD8221
AR Grade
Typ
BR Grade
Typ
ARM Grade
Parameter
DYNAMIC RESPONSE
Small Signal –3 dB
Bandwidth
Conditions
Min
Max
Min
Max
Min
Typ
Max
Unit
G = 1
825
562
100
14.7
825
562
100
14.7
825
562
100
14.7
kHz
kHz
kHz
kHz
G = 10
G = 100
G = 1000
Settling Time 0.01%
G = 1 to 100
G = 1000
10 V Step
10 V Step
10
80
10
80
10
80
µs
µs
Settling Time 0.001%
G = 1 to 100
G = 1000
13
110
2
13
110
2
13
110
2
µs
µs
Slew Rate
G = 1
1.5
2
1.5
2
1.5
2
V/µs
V/µs
G = 5–100
2.5
2.5
2.5
GAIN
G = 1 + (49.4 kΩ/RG)
Gain Range
Gain Error
G = 1
1
1000
1
1000
1
1000
V/V
VOUT 10 V
0.03
0.3
0.02
0.15
0.15
0.15
0.1
0.3
0.3
0.3
%
%
%
%
G = 10
G = 100
0.3
G = 1000
0.3
Gain Nonlinearity
G = 1 to 10
G = 100
VOUT = –10 V to +10 V
RL = 10 kΩ
3
10
15
40
95
3
10
15
40
95
5
15
ppm
ppm
ppm
ppm
RL = 10 kΩ
5
5
7
20
G = 1000
RL = 10 kΩ
10
10
10
10
10
15
50
G = 1 to 100
Gain vs. Temperature
G = 1
RL = 2 kΩ
100
3
10
2
5
3
10
ppm/°C
ppm/°C
G > 12
–50
–50
–50
INPUT
Input Impedance
Differential
Common Mode
100||2
100||2
100||2
100||2
100||2
100||2
GΩ||pF
GΩ||pF
V
Input Operating
Voltage Range3
VS = 2.3 V to 5 V
–VS + 1.9
+VS – 1.1
–VS + 1.9
+VS – 1.1
–VS + 1.9
+VS – 1.1
Over Temperature
T = –40°C to +85°C
VS = 5 V to 18 V
–VS + 2.0
–VS + 1.9
+VS – 1.2
+VS – 1.2
–VS + 2.0
–VS + 1.9
+VS – 1.2
+VS – 1.2
–VS + 2.0
–VS + 1.9
+VS – 1.2
+VS – 1.2
V
V
Input Operating
Voltage Range
Over Temperature
OUTPUT
T = –40°C to +85°C
RL = 10 kΩ
–VS + 2.0
+VS – 1.2
–VS + 2.0
+VS – 1.2
–VS + 2.0
+VS – 1.2
V
Output Swing
VS = 2.3 V to 5 V
T = –40°C to +85°C
VS = 5 V to 18 V
T = –40°C to +85°C
–VS + 1.1
–VS + 1.4
–VS + 1.2
–VS + 1.6
+VS – 1.2
+Vs – 1.3
+VS – 1.4
+VS – 1.5
–VS + 1.1
–VS + 1.4
–VS + 1.2
–VS + 1.6
+VS – 1.2
+Vs – 1.3
+VS – 1.4
+VS – 1.5
–VS + 1.1
–VS + 1.4
–VS + 1.2
–VS + 1.6
+VS – 1.2
+Vs – 1.3
+VS – 1.4
+VS – 1.5
V
Over Temperature
Output Swing
V
V
Over Temperature
Short-Circuit Current
TEMPERATURE RANGE
Specified Performance
Operational4
V
18
18
18
mA
–40
–40
+85
–40
–40
+85
–40
–40
+85
°C
°C
+125
+125
+125
1 Total RTI VOS = (VOSI) + (VOSO/G).
2 Does not include the effects of external resistor RG.
3 One input grounded. G = 1.
4 See Typical Performance Curves for expected operation between 85°C to 125°C.
Rev. A | Page 4 of 20
AD8221
ABSOLUTE MAXIMUM RATINGS
Table 2. AD8221 Absolute Maximum Ratings
Stresses above those listed under Absolute Maximum Ratings
Parameter
Rating
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions may affect device reliability.
Supply Voltage
18 V
Internal Power Dissipation
Output Short Circuit Current
Input Voltage (Common-Mode)
Differential Input Voltage
Storage Temperature
200 mW
Indefinite
VS
Vs
Specification is for device in free air:
–65°C to +150°C
Operational* Temperature Range –40°C to +125°C
SOIC θJA (4 Layer JEDEC Board) = 121°C/W.
MSOP θJA (4 Layer JEDEC Board) = 135°C/W.
*Temperature range for specified performance is –40°C to +85°C. See Typical
Performance Curves for expected operation from +85°C to +125°C.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumu-
late on the human body and test equipment and can discharge without detection. Although this
product features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recom-
mended to avoid performance degradation or loss of functionality.
Rev. A | Page 5 of 20
AD8221
TYPICAL PERFORMANCE CHARACTERISTICS
(@+25°C, VS = 15 V, RL = 10 kΩ, unless otherwise noted.)
3500
3000
2500
2000
1500
1000
500
1600
1400
1200
1000
800
600
400
200
0
0
–0.9
–0.6
–0.3
0
0.3
0.6
0.9
–150
–100
–50
0
50
100
150
INPUT OFFSET CURRENT (nA)
CMR (µV/V)
Figure 6. Typical Distribution of Input Offset Current
Figure 3. Typical Distribution for CMR (G = 1)
15
10
5
2400
2100
1800
1500
1200
900
600
300
0
V
= ±15V
S
0
V
= ±5V
S
–5
–10
–15
–60
–40
–20
0
20
40
60
–15
–10
–5
0
5
10
15
OUTPUT VOLTAGE (V)
INPUT OFFSET VOLTAGE (µV)
Figure 7. Input Common-Mode Range vs. Output Voltage, G = 1
Figure 4. Typical Distribution of Input Offset Voltage
15
10
3000
2500
2000
1500
1000
500
V
= ±15V
S
5
0
V
= ±5V
S
–5
–10
–15
0
–1.5
–1.0
–0.5
0
0.5
1.0
1.5
–15
–10
–5
0
5
10
15
OUTPUT VOLTAGE (V)
INPUT BIAS CURRENT (nA)
Figure 5. Typical Distribution of Input Bias Current
Figure 8. Input Common-Mode Range vs. Output Voltage, G = 100
Rev. A | Page 6 of 20
AD8221
180
160
140
120
100
80
0.80
0.75
0.70
0.65
0.60
0.55
0.50
0.45
0.40
GAIN = 1000
GAIN = 100
V
= ±15V
S
GAIN = 10
GAIN = 1
GAIN = 1000
V
= ±5V
S
60
40
20
0.1
1
10
100
1k
10k
100k
1M
–15
–10
–5
0
5
10
15
COMMON-MODE VOLTAGE (V)
FREQUENCY (Hz)
Figure 9. IBIAS vs. CMV
Figure 12. Positive PSRR vs. Frequency, RTI (G = 1 to 1000)
180
160
140
120
100
80
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0
GAIN = 1000
GAIN = 100
GAIN = 10
GAIN = 1
60
40
20
0.1
1
10
100
1k
10k
100k
1M
0.01
0.1
1
10
WARM-UP TIME (min)
FREQUENCY (Hz)
Figure 10. Change in Input Offset Voltage vs. Warm-Up Time
Figure 13. Negative PSRR vs. Frequency, RTI (G = 1 to 1000)
100k
10k
1k
5.0
4.0
3.0
V
= ±15V
S
2.0
BEST AVAILABLE FET
INPUT IN-AMP GAIN = 1
1.0
INPUT OFFSET CURRENT
INPUT BIAS CURRENT
BEST AVAILABLE FET
INPUT IN-AMP GAIN = 1000
0
–1.0
–2.0
–3.0
–4.0
–5.0
AD8221 GAIN = 1
100
10
AD8221 GAIN = 1000
10
100
1k
10k
100k
1M
10M
–40
–20
0
20
40
60
80
100
120
140
SOURCE RESISTANCE (Ω)
TEMPERATURE (°C)
Figure 11. Input Bias Current and Offset Current vs. Temperature
Figure 14. Total Drift vs. Source Resistance
Rev. A | Page 7 of 20
AD8221
100
80
70
GAIN = 1000
60
50
60
GAIN = 100
GAIN = 10
GAIN = 1
40
40
20
30
0
20
–20
–40
–60
–80
–100
10
0
–10
–20
–30
–40
–20
0
20
40
60
80
100
120
140
100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
TEMPERATURE (°C)
Figure 18. CMR vs. Temperature
Figure 15. Gain vs. Frequency
+V –0.0
S
160
140
120
100
80
GAIN = 1000
GAIN = 100
GAIN = 10
–0.4
–0.8
–1.2
–1.6
–2.0
–2.4
GAIN = 1000
GAIN = 1
+2.4
+2.0
+1.6
+1.2
+0.8
+0.4
GAIN = 10
GAIN = 100
60
–V +0.0
S
40
0.1
0
5
10
15
20
1
10
100
1k
10k
100k
1M
± SUPPLY VOLTAGE (V)
FREQUENCY (Hz)
Figure 16. CMRR vs. Frequency, RTI
Figure 19. Input Voltage Limit vs. Supply Voltage, G = 1
+V –0.0
S
160
140
120
100
80
–0.4
–0.8
–1.2
–1.6
–2.0
GAIN = 1000
GAIN = 100
GAIN = 10
GAIN = 1
R
R
= 10kΩ
= 2kΩ
L
L
GAIN = 100
+2.0
+1.6
+1.2
+0.8
+0.4
GAIN = 1000
R
R
= 2kΩ
L
L
60
= 10kΩ
GAIN = 10
10k
–V +0.0
S
40
0.1
0
5
10
± SUPPLY VOLTAGE (V)
15
20
1
10
100
1k
100k
1M
FREQUENCY (Hz)
Figure 20. Output Voltage Swing vs. Supply Voltage, G = 1
Figure 17. CMRR vs. Frequency, RTI, 1 kΩ Source Imbalance
Rev. A | Page 8 of 20
AD8221
30
20
10
0
V
= ±15V
V
= ±15V
S
S
1
10
100
1k
10k
–10
–8
–6
–4
–2
0
2
4
6
8
10
LOAD RESISTANCE (Ω)
OUTPUT VOLTAGE (V)
Figure 21. Output Voltage Swing vs. Load Resistance
Figure 24. Gain Nonlinearity, G = 100, RL = 10 kΩ
+V –0
S
V
= ±15V
S
–1
–2
–3
SOURCING
+3
+2
+1
SINKING
–V +0
S
0
1
2
3
4
5
6
7
8
9
10 11 12
–10
–8
–6
–4
–2
0
2
4
6
8
10
OUTPUT CURRENT (mA)
OUTPUT VOLTAGE (V)
Figure 22. Output Voltage Swing vs. Output Current, G = 1
Figure 25. Gain Nonlinearity, G = 1000, RL = 10 kΩ
1k
V
= ±15V
S
GAIN = 1
100
10
1
GAIN = 10
GAIN = 100
GAIN = 1000
GAIN = 1000
BW LIMIT
1
10
100
1k
10k
100k
–10
–8
–6
–4
–2
0
2
4
6
8
10
FREQUENCY (Hz)
OUTPUT VOLTAGE (V)
Figure 26. Voltage Noise Spectral Density vs. Frequency (G = 1 to 1000)
Figure 23. Gain Nonlinearity, G = 1, RL = 10 kΩ
Rev. A | Page 9 of 20
AD8221
2µV/DIV
1s/DIV
5pA/DIV
1s/DIV
Figure 27. 0.1 Hz to 10 Hz RTI Voltage Noise (G = 1)
Figure 30. 0.1 Hz to 10 Hz Current Noise
30
25
20
15
10
5
V
= ±15V
S
GAIN = 1
GAIN = 10, 100, 1000
0
1k
10k
100k
1M
0.1µV/DIV
1s/DIV
FREQUENCY (Hz)
Figure 28. 0.1 Hz to 10 Hz RTI Voltage Noise (G = 1000)
Figure 31. Large Signal Frequency Response
1k
100
10
5V/DIV
7.9
8.5
µ
s TO 0.01%
10mV/DIV
µs TO 0.001%
1
10
100
1k
10k
20µs/DIV
FREQUENCY (Hz)
Figure 29. Current Noise Spectral Density vs. Frequency
Figure 32. Large Signal Pulse Response and Settling Time (G = 1), 0.002%/div
Rev. A | Page 10 of 20
AD8221
5V/div
4.9
5.6
µ
s TO 0.01%
10mV/div
µs TO 0.001%
20mV/DIV
20
µs/div
4µ
s/DIV
Figure 33. Large Signal Pulse Response and Settling Time (G = 10),
0.002%/div
Figure 36. Small Signal Response, G = 1, RL = 2 kΩ, CL = 100 pF
5V/DIV
10.3
13.4
µ
µ
s TO 0.01%
s TO 0.001%
10mV/DIV
20mV/DIV
20µ
s/DIV
4µs/DIV
Figure 34. Large Signal Pulse Response and Settling Time (G = 100),
0.002%/div
Figure 37. Small Signal Response, G = 10, RL = 2 kΩ, CL = 100 pF
5V/DIV
83
112
µ
s TO 0.01%
10mV/DIV
µs TO 0.001%
20mV/DIV
20µ
s/DIV
10µs/DIV
Figure 35. Large Signal Pulse Response and Settling Time (G = 1000),
0.002%/div
Figure 38. Small Signal Response, G = 100, RL = 2 kΩ, CL = 100 pF
Rev. A | Page 11 of 20
AD8221
1k
100
10
2
SETTLED TO 0.001%
SETTLED TO 0.01%
20mV/DIV
1
1
10
100
1k
100µs/DIV
GAIN
Figure 41. Settling Time vs. Gain for a 10 V Step
Figure 39. Small Signal Response, G = 1000, RL = 2 kΩ, CL = 100 pF
15
10
SETTLED TO 0.001%
SETTLED TO 0.01%
5
0
0
5
10
15
20
OUTPUT VOLTAGE STEP SIZE (V)
Figure 40. Settling Time vs. Step Size (G = 1)
Rev. A | Page 12 of 20
AD8221
THEORY OF OPERATION
V
I
I
B
A1
A2
I
COMPENSATION
I
COMPENSATION
B
B
10kΩ
C1
C2
+V
–V
S
10kΩ
10kΩ
OUTPUT
A3
+V
S
+V
S
+V
–V
R2
+V
S
R1 24.7kΩ
24.7kΩ
S
400Ω
+V
400Ω
S
S
Q2
–IN
Q1
+IN
REF
10kΩ
R
G
–V
–V
S
S
S
–V
–V
S
S
Figure 42. Simplified Schematic
The AD8221 is a monolithic instrumentation amplifier based
on the classic 3-op amp topology. Input transistors Q1 and Q2
are biased at a fixed current, so that any differential input signal
will force the output voltages of A1 and A2 to change accor-
dingly. A signal applied to the input creates a current through
RG, R1, and R2, such that the outputs of A1 and A2 deliver the
correct voltage. Topologically, Q1, A1, R1 and Q2, A2, R2 can be
viewed as precision current feedback amplifiers. The amplified
differential and common-mode signals are applied to a dif-
ference amplifier that rejects the common-mode voltage but
amplifies the differential voltage. The difference amplifier
employs innovations that result in low output offset voltage as
well as low output offset voltage drift. Laser-trimmed resistors
allow for a highly accurate in-amp with gain error typically less
than 20 ppm and CMRR that exceeds 90 dB (G = 1).
Since the input amplifiers employ a current feedback architec-
ture, the AD8221’s gain-bandwidth product increases with gain,
resulting in a system that does not suffer from the expected
bandwidth loss of voltage feedback architectures at higher gains.
In order to maintain precision even at low input levels, special
attention was given to the AD8221’s design and layout, resulting
in an in-amp whose performance satisfies the most demanding
applications.
A unique pinout enables the AD8221 to meet a CMRR
specification of 80 dB at 10 kHz (G = 1) and 110 dB at 1 kHz
(G = 1000). The balanced pinout, shown in Figure 43, reduces
the parasitics that had, in the past, adversely affected CMRR
performance. In addition, the new pinout simplifies board
layout because associated traces are grouped together. For
example, the gain setting resistor pins are adjacent to the inputs,
and the reference pin is next to the output.
Using superbeta input transistors and an IB compensation
scheme, the AD8221 offers extremely high input impedance,
low IB, low IB drift, low IOS, low input bias current noise, and
extremely low voltage noise of 8 nV/√Hz.
1
2
3
4
8
7
6
5
+V
V
–IN
S
R
G
OUT
The transfer function of the AD8221 is
R
REF
G
+IN
–V
S
AD8221
49.4kΩ
G =1+
TOP VIEW
RG
Figure 43. Pinout Diagram
Users can easily and accurately set the gain using a single,
standard resistor.
Rev. A | Page 13 of 20
AD8221
Grounding
GAIN SELECTION
The AD8221’s output voltage is developed with respect to the
potential on the reference terminal. Care should be taken to tie
REF to the appropriate “local ground.”
Placing a resistor across the RG terminals will set the AD8221’s
gain, which may be calculated by referring to Table 3 or by
using the gain equation
In mixed-signal environments, low level analog signals need to
be isolated from the noisy digital environment. Many ADCs
have separate analog and digital ground pins. Although it is
convenient to tie both grounds to a single ground plane, the
current traveling through the ground wires and PC board may
cause hundreds of millivolts of error. Therefore, separate analog
and digital ground returns should be used to minimize the
current flow from sensitive points to the system ground. An
example layout is shown in Figure 44 and Figure 45.
49.4kΩ
G −1
RG =
Table 3. Gains Achieved Using 1% Resistors
1% Std Table Value of RG (Ω)
Calculated Gain
49.9 k
12.4 k
5.49 k
2.61 k
1.00 k
499
1.990
4.984
9.998
19.93
50.40
100.0
249
199.4
100
495.0
49.9
991.0
The AD8221 defaults to G = 1 when no gain resistor is used.
Gain accuracy is determined by the absolute tolerance of RG.
The TC of the external gain resistor will increase the gain drift
of the instrumentation amplifier. Gain error and gain drift are
kept to a minimum when the gain resistor is not used.
LAYOUT
Careful board layout maximizes system performance. Traces
from the gain setting resistor to the RG pins should be kept as
short as possible to minimize parasitic inductance. To ensure
the most accurate output, the trace from the REF pin should
either be connected to the AD8221’s local ground as shown in
Figure 47, or connected to a voltage that is referenced to the
AD8221’s local ground.
Figure 44.Top Layer of the AD8221-EVAL
Common-Mode Rejection
One benefit of the AD8221’s high CMRR over frequency is that
it has greater immunity to disturbances such as line noise and
its associated harmonics than do typical in-amps. These,
typically, have CMRR fall-off at 200 Hz; common-mode filters
are often used to compensate for this shortcoming. The AD8221
is able to reject CMRR over a greater frequency range, reducing
the need for filtering.
A well implemented layout helps to maintain the AD8221’s high
CMRR over frequency. Input source impedance and capacitance
should be closely matched. In addition, source resistance and
capacitance should be placed as close to the inputs as
permissible.
Figure 45.Bottom Layer of the AD8221-EVAL
Rev. A | Page 14 of 20
AD8221
+V
S
REFERENCE TERMINAL
As shown in Figure 42, the reference terminal, REF, is at one end
of a 10 kΩ resistor. The instrumentation amplifier’s output is
referenced to the voltage on the REF terminal; this is useful
when the output signal needs to be offset to a precise midsupply
level. For example, a voltage source can be tied to the REF pin to
level-shift the output so that the AD8221 can interface with an
ADC. The allowable reference voltage range is a function of the
gain, input and supply voltage. The REF pin should not exceed
either +VS or –VS by more than 0.5 V.
AD8221
REF
REF
REF
–V
S
TRANSFORMER
+V
S
For best performance, source impedance to the REF terminal
should be kept low, since parasitic resistance can adversely affect
CMRR and gain accuracy.
AD8221
POWER SUPPLY REGULATION AND BYPASSING
A stable dc voltage should be used to power the instrumenta-
tion amplifier. Noise on the supply pins may adversely affect
performance. Bypass capacitors should be used to decouple the
amplifier.
–V
S
THERMOCOUPLE
+V
S
A 0.1 µF capacitor should be placed close to each supply pin. As
shown in Figure 47, a 10 µF tantalum capacitor may be used
further away from the part. In most cases, it may be shared by
other precision integrated circuits.
C
C
R
R
1
fHIGH-PASS
=
2πRC
AD8221
Figure 46
–V
S
+V
CAPACITOR COUPLED
S
Figure 48. Creating an IBIAS Path
0.1µF
10µF
INPUT PROTECTION
+IN
–IN
All terminals of the AD8221 are protected against ESD1. In
addition, the input structure allows for dc overload conditions
below the negative supply, –Vs. The internal 400 Ω resistors
limit current in the event of a negative fault condition. However,
in the case of a dc overload voltage above the positive supply,
+Vs, a large current would flow directly through the ESD diode
to the positive rail. Therefore, an external resistor should be
used in series with the input to limit current for voltages above
+Vs. In either scenario, the AD8221 can safely handle a
continuous 6 mA current, I = VIN/REXT for positive overvoltage
and I = VIN/(400 Ω + REXT) for negative overvoltage.
V
OUT
AD8221
LOAD
REF
0.1µF
10µF
–V
S
Figure 47. Supply Decoupling,. REF and Output Referred to Local Ground
INPUT BIAS CURRENT RETURN PATH
The AD8221’s input bias current must have a return path to
common. When the source, such as a thermocouple, cannot
provide a return current path, one should be created, as shown
in Figure 48.
For applications where the AD8221 encounters extreme
overload voltages, as in cardiac defibrillators, external series
resistors and low leakage diode clamps such as BAV199Ls,
FJH1100s, or SP720s should be used.
1 1 kV—Human Body Model.
Rev. A | Page 15 of 20
AD8221
RF INTERFERENCE
RF rectification is often a problem when amplifiers are used in
applications where there are strong RF signals. The disturbance
may appear as a small dc offset voltage. High frequency signals
can be filtered with a low-pass R-C network placed at the input
of the instrumentation amplifier, as shown in Figure 49. The
filter limits the input signal bandwidth according to the
following relationship:
CD affects the difference signal and CC affects the common-
mode signal. Values of R and CC should be chosen to minimize
RFI. Mismatch between the R × CC at the positive input and the
R × CC at negative input will degrade the AD8221’s CMRR. By
using a value of CD one magnitude larger than CC, the effect of
the mismatch is reduced, and hence, performance is improved.
PRECISION STRAIN GAGE
1
FilterFreqDiff =
The AD8221’s low offset and high CMRR over frequency make
it an excellent candidate for bridge measurements. As shown in
Figure 50, the bridge can be directly connected to the inputs of
the amplifier.
2πR(2CD +CC)
1
FilterFreqCM =
2πRCC
+5V
10µF
0.1µF
where CD ≥ 10CC.
350Ω
350Ω
350Ω
350Ω
+IN
–IN
+
+15V
R
AD8221
–
0.1µF
10µF
+2.5V
C
1nF
C
D
C
R
+IN
R1
Figure 50. Precision Strain Gage
4.02kΩ
V
OUT
C
10nF
1nF
AD8221
499Ω
R
REF
–IN
4.02kΩ
C
0.1µF
10µF
–15V
Figure 49. RFI Suppression
Rev. A | Page 16 of 20
AD8221
+12V
+2.5V
+12V
R3 1kΩ
0.1µF
+5V
10nF
+5V
+12V
10µF
0.1µF
R6 27.4Ω
AD8022
C1
470pF
(½)
0.1µF
+IN
–IN
AV
DD
DV
DD
V
V
IN+
IN–
0.1µF
AD8221
OP27
R1
10kΩ
–12V
AD7723
C2
REF
R5
499Ω
220µF
+12V
R2
10kΩ
0.1µF
AGND VGND REF1 REF2
0.1µF
10µF
0.1µF
R7 27.4Ω
–12V
AD8022
–12V
(½)
R4 1kΩ
220nF
10nF
0.1µF
2.5V
22µF
+5V
V
V
OUT
IN
–12V
10µF
0.1µF
AD780
GND
Figure 51. Interfacing to a Differential Input ADC
CONDITIONING 1ꢀ V SIGNALS FOR A +5 V
DIFFERENTIAL INPUT ADC
AC-COUPLED INSTRUMENTATION AMPLIFIER
Measuring small signals that are in the amplifier’s noise or offset
can be a challenge. Figure 52 shows a circuit that can improve
the resolution of small ac signals. The large gain reduces the
referred input noise of the amplifier to 8 nV/√Hz. Thus, smaller
signals can be measured since the noise floor is lower. DC
offsets that would have been gained by 100 are eliminated from
the AD8221’s output by the integrator feedback network.
There is a need in many applications to condition ±10 V signals.
However, many of today’s ADCs and digital ICs operate on
much lower, single-supply voltages. Furthermore, new ADCs
have differential inputs because they provide better common-
mode rejection, noise immunity, and performance at low supply
voltages. Interfacing a ±10 V, single-ended instrumentation
amplifier to a +5 V, differential ADC may be a challenge.
Interfacing the in-amp to the ADC requires attenuation and a
level shift. A solution is shown in Figure 51.
At low frequencies, the OP1177 forces the AD8221’s output to
0 V. Once a signal exceeds fHIGH-PASS, the AD8221 outputs the
amplified input signal.
In this topology, an OP27 sets the AD8221’s reference voltage.
The in-amp’s output signal is taken across the OUT pin and the
REF pin. Two 1 kΩ resistors and a 499 Ω resistor attenuate the
10 V signal to +4 V. An optional capacitor, C1, may serve as an
ant aliasing filter. An AD8022 is used to drive the ADC.
+V
S
0.1µF
+IN
R
1
fHIGH-PASS
=
2πRC
This topology has five benefits. In addition to level-shifting and
attenuation, very little noise is contributed to the system. Noise
from R1 and R2 is common to both of the ADC’s inputs and is
easily rejected. R5 adds a third of the dominant noise and there-
fore makes a negligible contribution to the noise of the system.
The attenuator divides the noise from R3 and R4. Likewise, its
noise contribution is negligible. The fourth benefit of this inter-
face circuit is that the AD8221’s acquisition time is reduced by a
factor of 2. With the help of the OP27, the AD8221 only needs
to deliver one-half of the full swing; therefore, signals can settle
more quickly. Lastly, the AD8022 settles quickly, which is helpful
because the shorter the settling time, the more bits that can be
resolved when the ADC acquires data. This configuration pro-
vides attenuation, a level-shift, and a convenient interface with a
differential input ADC while maintaining performance.
AD8221
499Ω
R
REF
15.8kΩ
C 1µF
–IN
+V
S
0.1µF
0.1µF
–V
S
OP1177
+V
–V
S
S
10µF
10µF
0.1µF
–V
S
Figure 52. AC-Coupled Circuit
Rev. A | Page 17 of 20
AD8221
OUTLINE DIMENSIONS
3.00
BSC
8
5
4
4.90
BSC
3.00
BSC
PIN 1
0.65 BSC
1.10 MAX
0.15
0.00
0.80
0.60
0.40
8°
0°
0.38
0.22
0.23
0.08
COPLANARITY
0.10
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS MO-187AA
Figure 53. 8-Lead Mini Small Outline Package [MSOP] (RM-8)
Dimensions shown in millimeters
5.00 (0.1968)
4.80 (0.1890)
8
1
5
4
6.20 (0.2440)
5.80 (0.2284)
4.00 (0.1574)
3.80 (0.1497)
1.27 (0.0500)
BSC
0.50 (0.0196)
0.25 (0.0099)
× 45°
1.75 (0.0688)
1.35 (0.0532)
0.25 (0.0098)
0.10 (0.0040)
8°
0.51 (0.0201)
0.31 (0.0122)
0° 1.27 (0.0500)
COPLANARITY
0.10
0.25 (0.0098)
0.17 (0.0067)
SEATING
PLANE
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
Figure 54. 8-Lead Shrink Small Outline Package [SOIC] (R-8)
ORDERING GUIDE
Temperature Range for
Specified Performance
Operational1 Temperature
Range
Package
Option
Model
Package Description
8-Lead SOIC
13" Tape and Reel
7" Tape and Reel
8-Lead MSOP
13" Tape and Reel
7" Tape and Reel
8-Lead SOIC
13" Tape and Reel
7" Tape and Reel
Evaluation Board
Branding
AD8221AR
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
R-8
R-8
R-8
RM-8
RM-8
RM-8
R-8
R-8
R-8
AD8221AR-REEL
AD8221AR-REEL7
AD8221ARM
AD8221ARM-REEL
JLA
JLA
JLA
AD8221ARM-REEL7 –40°C to +85°C
AD8221BR
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
AD8221BR-REEL
AD8221BR-REEL7
AD8221-EVAL
1 See Typical Performance Curves for expected operation from 85°C to 125°C.
Rev. A | Page 18 of 20
AD8221
NOTES
Rev. A | Page 19 of 20
AD8221
NOTES
© 2ꢀꢀ3 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
Cꢀ3149–ꢀ–11/ꢀ3(A)
Rev. A | Page 20 of 20
相关型号:
AD8221ARMZ-REEL
INSTRUMENTATION AMPLIFIER, 60uV OFFSET-MAX, 0.825MHz BAND WIDTH, PDSO8, MO-187AA, MSOP-8
ADI
AD8221ARMZ-REEL7
INSTRUMENTATION AMPLIFIER, 60uV OFFSET-MAX, 0.825MHz BAND WIDTH, PDSO8, MO-187AA, MSOP-8
ADI
©2020 ICPDF网 联系我们和版权申明