5B31-03-NI [ADI]
Analog Circuit;
| 型号： | 5B31-03-NI |
| 厂家： | 
ADI |
| 描述： | Analog Circuit |
| 文件： | 总8页 (文件大小：700K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Millivolt and Voltage Input
5B30/5B31
FEATURES
Isolated Voltage Input.
Amplifies, Protects, Filters, & Isolates Analog Input Voltages.
Protect the computer side from damage due to field-side
overvoltage faults.
A Series output switch eliminates the need for external
multiplexing in many applications.
Module circuitry can withstand 240v rms at the input screw-
terminals.
All 5B30 & 5B31 series modules are mix-and-match and Hot
Swappable.
Figure 1. 5B30/5B31 Functional Block Diagram
There are also a number of backplanes and mounting sockets
which provide a complete signal conditioning solution for end
users. Each backplane incorporates screw terminals for field
wiring inputs and outputs and cold junction sensors for
thermocouple applications.
APPLICATIONS
Industrial signal conditioning
Industrial signal isolation
Industrial signal filtering
These signal conditioners are designed to provide an easy and
convenient solution to signal conditioning problems of both
designers and end users in measurement and control
applications. Typical uses include microcomputer-based
measurement systems, standard data acquisition systems,
programmable controllers, analog recorders and dedicated
control systems. The 5 B series modules are ideally suited to
applications where monitoring and control of temperature,
pressure, flow, rotation and other analog signals are required.
PRODUCT OVERVIEW
The 5B Series represents an innovative generation of low cost,
high performance plug-in signal conditioners. Designed for
industrial applications, these modules incorporate highly
reliable transformer-based isolation and automated surface-
mount manufacturing technology. They are compact,
economical components whose performance exceeds that
available from more expensive devices. Combining 1500 V rms
continuous isolation, +0.05% calibrated accuracy, small size and
low cost, the 5B Series is an attractive alternative to expensive
signal conditioners and in-house designs
The 5B Series modules and backplanes are approved by Factory
Mutual (FM) and the 5B Series modules are approved by the
Canadian Standards Association (CSA) for use in Class 1,
Division 2, Groups A, B, C, and D locations. These approvals
certify that the 5B Series is suitable for use in locations where a
hazardous concentration of flammable gas may exist only under
fault conditions of operation. Equipment of this category is
called “non-incendive” and they need no special enclosures or
other physical safeguards.
All modules are potted and identical in pin-out and size (2.27” x
2.32” x 0.595”). They can be mixed and matched, permitting
users to address their exact needs, and may be “hot swapped
without disturbing field wiring or power. The isolated input
modules provide 0 to +5V or +5V outputs and accept J, K, T, E,
R, S, N, or B type thermocouples.
The 5B series modules and backplanes have been tested and
passed the stringent heavy industrial requirements of the
European Union’s electromagnetic compatibility (ENC)
directive – EN50082-1 and EN50081-2. When used according
to installation directions (refer to 5B series User Manual), any
errors caused by EMI/RFI interference will be less than 0.1% of
the full scale 5B measurement range for field strengths up to 10
V/M and frequencies up to 1 GHz.
These modules feature complete signal conditioning functions
including 240 V rms input protection, filtering, chopper
stabilized low drift +1 uV/oC amplification, 1500 V rms
isolation, and sensor excitation when required.
All modules feature excellent common mode rejection and
meet industrial transient surge withstand specifications.
FUNCTIONAL BLOCK DIAGRAM
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com
© 2004 Analog Devices, Inc. All rights reserved.
5B30 / 5B31
GENERAL DESCRIPTION
mode (nosie on signal return) rejection at 50/60 Hz, enabling
accurate measurement of small signals in high electrical noise.
The 5B30 and 5B31 are single-channel signal conditioning
modules that amplify, protect, filter and isolate analog input
voltages.
Signal isolation by transformer coupling uses a proprietary
modulation technique for linear, stable and reliable
The 5B30 and 5B31 protect the computer side from damage due
to field-side over voltage faults. All models withstand 240V rms
at their input terminals without damage thereby shielding
computer side circuitry from field-side over voltage conditions.
In addition, 5B30 and 5B31 Series modules are mix-and-match
and hot swappable, so can be inserted or removed from any
socket in the same backplane without disrupting system power.
performance. The differential input circuit on the field side is
fully floating, eliminating the need for any input grounding. A
demodulator on the computer side of the signal transformer
recovers the original signal, which is then filtered and buffered
to provide a low-noise, low-impedance output signal. The
output common must be kept within +3 V of power common.
A series output switch eliminates the need for external
multiplexing in many applications. The switch is turned on by
an active-low enable input. If the switch is to be on at all times,
the enable-input should be grounded to power common as it is
on the 5B01 and 5B08 backplanes.
A chopper-stabilized input amplifier provides low drift and
stable gain. At the amplifier input, a stable, laser-trimmed zero-
scale input voltage is subtracted from the input signal to set the
zero scale value. For user convenience, the zero can be
optionally factory-set to meet custom needs. This allows
suppression of a zero-scale input value many times larger that
the total span for precise expanded-scale measurements.
Internal multi-pole low-pass filtering with a four-Hz cutoff (-
3dB) enhances normal-mode (noise on signal) and common-
.
Figure2
Rev. 0 | Page 2 of 8
5B30 / 5B31
5B30 / 5B31—SPECIFICATIONS
5B30 and 5B31 Models Available
Model
5B30-01
5B30-02
5B30-03
5B30-04
5B30-05
5B30-06
5B30-Custom
Model
Input Range
-10 mV to +10 mV
-50 mV to +50 mV
-100 mV to +100 mV
-10 mV to +10 mV
-50 mV to +50 mV
-100 mV to +100 mV
*
Output Range
-5 V to +5 V
-5 V to +5 V
-5 V to +5 V
0 V to +5 V
0 V to +5 V
0 V to +5 V
*
Input Range
-1 V to +1 V
Output Range
-5 V to +5 V
-5 V to +5 V
-5 V to +5 V
0 V to +5 V
0 V to +5 V
0 V to +5 V
-5 V to +5 V
*
5B31-01
5B31-02
5B31-03
5B31-04
5B31-05
5B31-06
5B31-07
5B31-Custom
-5 V to +5 V
-10 V to +10 V
-1 V to +1 V
-5 V to +5 V
-10 V to +10 V
-20 V to +20 V
*
*Custom Input/Output ranges are available. Refer to configuration guide.
5B30 and 5B31 Specifications
Description
Model 5B30
Input Ranges
±10 mV to ±100 mV
±5 mV to ±500 mV
Model 5B31
Standard Ranges
±1 V to ±20 V
Custom Ranges
±0.5 V to ±20 V
*
Output Ranges (RL > 50 kΩ)4
-5 V to +5 V or 0 V to +5 V
Accuracy2
±0.05% Span ±10 µV RTI ±0.05% (Vz1) ±0.05% Span ±0.2 mV RTI ±0.05% (Vz1)
Initial @ +25°C
Nonlinearity
±0.02% Span
±1 µV/°C
*
Input Offset vs. Temperature
±20 µV/°C
Output Offset vs. Temperature ±20 µV/°C
*
Gain vs. Temperature
Input Bias Current
±25 ppm of Reading/°C
±3 nA
±50 ppm of Reading/°C
±0.2 nA
Input Resistance
5 MΩ
Power On
Power Off
650 kΩ
650 kΩ
40 kΩ
Rev. 0 | Page 3 of 8
5B30 / 5B31
Overload
40 kΩ
650 kΩ
Noise
Input, 0.1 Hz to 10 Hz Bandwidth
Output, 100 kHz Bandwidth
Bandwidth, -3 dB
0.2 µV rms
2 µV rms
200 µV rms
4 Hz
*
*
*
Output Rise Time, 10% to 90% Span 200 ms
Common-Mode Voltage (CMV)3
Input-to-Output, Continuous
Output-to-Power, Continuous
Transient
1500 V rms maximum
±3 V maximum
*
*
*
ANSI/IEEE C37.90.1-1989
Common-Mode Rejection (CMR)
160 dB (all ranges)
160 dB (span < ±2 V)
150 dB (span = ±10 V)
1 kΩ Source Imbalance, 50/60 Hz
Normal Mode Rejection, 50/60 Hz
60 dB
*
Input Protection
240 V rms maximum
ANSI/IEEE C37.90.1-1989
50 Ω
Continuous
*
*
*
*
*
Transient
Output Resistance4
Voltage Output Protection
Output Selection Time
Continuous Short to Ground
6 µs @ Cload = 0 to 2,000 pF
Output Enable Control
+1 V
Max Logic "0"
*
Min Logic "1"
+2.5 V
*
Max Logic "1"
+36 V
*
Input Current "0"
0.4 mA
*
Power Supply Voltage
Power Supply Current
Power Supply Sensitivity, RTI
Mechanical Dimensions
+5 V ±5%
*
30 mA
*
±2 µV/Vs%
±0.4 mV/Vs%
*
2.275" x 2.375" x 0.595"
(57.8 mm x 59.1 mm x 15.1 mm)
Environmental
Temperature Range
-25°C to +85°C
Rated Performance
Operating
*
*
*
*
*
-40°C to +85°C
Storage
-40°C to +85°C
Relative Humidity
0 to 93% @ +40°C non-condensing
RFI Susceptibility ±0.5% Span error @ 400 MHz, 5 Watt, 3 ft
* Specifications same as model 5B30.
1 Vz is the nominal input voltage that results in a 0 V output.
2 Includes the combined effects of repeatability, hysteresis, and nonlinearity and assumes RL > 50 kΩ.
3 The output common must be kept within ±3 V of power common.
4 Loads heavier than 50 kΩ will degrade nonlinearity and gain temperature coefficient.
Specifications subject to change without notice.
Rev. 0 | Page 4 of 8
5B30 / 5B31
PIN CONFIGURATIONS AND FUNCTIONAL DESCRIPTIONS
Figure 3 5B30 /5B31 Input Field Connections
Table 1. Pin Function Descriptions—
Pin No.
Description
1
2
3
4
NC
LOW -
HIGH +
NC
Figure 4 . Model 5B Series Module, with pin-out assignments.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human
body and test equipment and can discharge without detection. Although this product features proprietary ESD
protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges.
Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
Rev. 0 | Page 5 of 8
5B30 / 5B31
OUTLINE DIMENSIONS
Figure 5. Outline Dimensions
Rev. 0 | Page 6 of 8
5B30 / 5B31
NOTES
Rev. 0 | Page 7 of 8
5B30 / 5B31
NOTES
©
2004 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective companies.
D05095-0-9/04(0)
Rev. 0 | Page 8 of 8
相关型号：
©2020 ICPDF网 联系我们和版权申明