S-1170B16PD-OTBTFZ [ABLIC]
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR;![S-1170B16PD-OTBTFZ](http://pdffile.icpdf.com/pdf2/p00354/img/icpdf/S-1170B27UC-_2174048_icpdf.jpg)
型号: | S-1170B16PD-OTBTFZ |
厂家: | ![]() |
描述: | HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR 输出元件 |
文件: | 总30页 (文件大小:415K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
S-1170 Series
HIGH RIPPLE-REJECTION AND LOW DROPOUT
HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
www.ablic.com
© ABLIC Inc., 2003-2015
Rev.4.1_02
The S-1170 Series is a positive voltage regulator with a low dropout voltage, high-accuracy output voltage, and
low current consumption developed based on CMOS technology.
A built-in low on-resistance transistor provides a low dropout voltage and large output current, a built-in
overcurrent protection circuit prevents the load current from exceeding the current capacity of the output
transistor, and a built-in thermal shutdown circuit prevents damage caused by the heat. An ON/OFF circuit
ensures a long battery life. Compared with the voltage regulators using the conventional CMOS technology, a
larger variety of capacitors are available, including small ceramic capacitors. Small SOT-89-5 and 6-Pin
HSON(A) packages realize high-density mounting.
Features
1.5 V to 5.5 V, selectable in 0.1 V step
1.0%
Output voltage:
Output voltage accuracy:
Dropout voltage:
120 mV typ. (3.0 V output product, IOUT = 300 mA)
During operation: 80 A typ., 160 A max.
During power-off: 0.1 A typ., 1.0 A max.
Possible to output 800 mA (VIN VOUT(S) 1.0 V)*1
A ceramic capacitor of 4.7 F or more can be used.
70 dB typ. (f = 1.0 kHz)
Current consumption:
Output current:
Input and output capacitors:
Ripple rejection:
Limits overcurrent of output transistor.
Prevents damage caused by heat.
Ensures long battery life.
Built-in overcurrent protection circuit:
Built-in thermal shutdown circuit:
Built-in ON/OFF circuit:
Operation temperature range:
Ta = 40°C to 85°C
Lead-free, Sn 100%, halogen-free*2
*1. Attention should be paid to the power dissipation of the package when the output current is large.
*2. Refer to “ Product Name Structure” for details.
Applications
Constant-voltage power supply for DVD and CD-ROM drive
Constant-voltage power supply for battery-powered device
Constant-voltage power supply for personal communication device
Constant-voltage power supply for notebook PC
Packages
SOT-89-5
6-Pin HSON(A)
1
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Block Diagram
*1
VIN
VOUT
Overcurrent
protection circuit
Thermal shutdown circuit
ON/OFF
circuit
ON/OFF
Reference
voltage circuit
VSS
*1. Parasitic diode
Figure 1
2
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Product Name Structure
Users can select the product type, output voltage, and package type for the S-1170 Series. Refer to “1.
Product name” regarding the contents of product name, “2. Packages” regarding the package drawings,
“3. Product name list” regarding details of the product name.
1. Product name
(1) SOT-89-5
S-1170
x
xx UC
xxx TF
x
Environmental code
U: Lead-free (Sn 100%), halogen-free
G: Lead-free (for details, please contact our sales office)
IC direction in tape specifications*1
Product name (abbreviation)*2
Package name (abbreviation)
UC: SOT-89-5
Output voltage
15 to 55
(E.g., when the output voltage is 1.5 V, it is expressed
as 15.)
Product type*3
A: ON/OFF pin negative logic
B: ON/OFF pin positive logic
*1. Refer to the tape drawing.
*2. Refer to the product name list.
*3. Refer to “3. ON/OFF pin” in “ Operation”.
3
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
(2) 6-Pin HSON(A)
S-1170 xx PD
x
xxx TF
x
Environmental code
S: Lead-free, halogen-free
G: Lead-free (for details, please contact our sales office)
IC direction in tape specifications*1
Product name (abbreviation)*2
Package name (abbreviation)
PD: 6-Pin HSON(A)
Output voltage
15 to 55
(E.g., when the output voltage is 1.5 V, it is expressed
as 15.)
Product type*3
A: ON/OFF pin negative logic
B: ON/OFF pin positive logic
*1. Refer to the tape drawing.
*2. Refer to the product name list.
*3. Refer to “3. ON/OFF pin” in “ Operation”.
2. Packages
Drawing Code
Tape
Package Name
Package
Reel
SOT-89-5
6-Pin HSON(A)
UP005-A-P-SD
PD006-A-P-SD
UP005-A-C-SD
PD006-A-C-SD
UP005-A-R-SD
PD006-A-R-SD
4
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
3. Product name list
Table 1
Output Voltage
SOT-89-5
6-Pin HSON(A)
S-1170B15UC-OTATFx
S-1170B16UC-OTBTFx
S-1170B17UC-OTCTFx
S-1170B18UC-OTDTFx
S-1170B19UC-OTETFx
S-1170B20UC-OTFTFx
S-1170B21UC-OTGTFx
S-1170B22UC-OTHTFx
S-1170B23UC-OTITFx
S-1170B24UC-OTJTFx
S-1170B25UC-OTKTFx
S-1170B26UC-OTLTFx
S-1170B27UC-OTMTFx
S-1170B28UC-OTNTFx
S-1170B29UC-OTOTFx
S-1170B30UC-OTPTFx
S-1170B31UC-OTQTFx
S-1170B32UC-OTRTFx
S-1170B33UC-OTSTFx
S-1170B34UC-OTTTFx
S-1170B35UC-OTUTFx
S-1170B36UC-OTVTFx
S-1170B37UC-OTWTFx
S-1170B38UC-OTXTFx
S-1170B39UC-OTYTFx
S-1170B40UC-OTZTFx
S-1170B41UC-OUATFx
S-1170B42UC-OUBTFx
S-1170B43UC-OUCTFx
S-1170B44UC-OUDTFx
S-1170B45UC-OUETFx
S-1170B46UC-OUFTFx
S-1170B47UC-OUGTFx
S-1170B48UC-OUHTFx
S-1170B49UC-OUITFx
S-1170B50UC-OUJTFx
S-1170B51UC-OUKTFx
S-1170B52UC-OULTFx
S-1170B53UC-OUMTFx
S-1170B54UC-OUNTFx
S-1170B55UC-OUOTFx
S-1170B15PD-OTATFz
S-1170B16PD-OTBTFz
S-1170B17PD-OTCTFz
S-1170B18PD-OTDTFz
S-1170B19PD-OTETFz
S-1170B20PD-OTFTFz
S-1170B21PD-OTGTFz
S-1170B22PD-OTHTFz
S-1170B23PD-OTITFz
S-1170B24PD-OTJTFz
S-1170B25PD-OTKTFz
S-1170B26PD-OTLTFz
S-1170B27PD-OTMTFz
S-1170B28PD-OTNTFz
S-1170B29PD-OTOTFz
S-1170B30PD-OTPTFz
S-1170B31PD-OTQTFz
S-1170B32PD-OTRTFz
S-1170B33PD-OTSTFz
S-1170B34PD-OTTTFz
S-1170B35PD-OTUTFz
S-1170B36PD-OTVTFz
S-1170B37PD-OTWTFz
S-1170B38PD-OTXTFz
S-1170B39PD-OTYTFz
S-1170B40PD-OTZTFz
S-1170B41PD-OUATFz
S-1170B42PD-OUBTFz
S-1170B43PD-OUCTFz
S-1170B44PD-OUDTFz
S-1170B45PD-OUETFz
S-1170B46PD-OUFTFz
S-1170B47PD-OUGTFz
S-1170B48PD-OUHTFz
S-1170B49PD-OUITFz
S-1170B50PD-OUJTFz
S-1170B51PD-OUKTFz
S-1170B52PD-OULTFz
S-1170B53PD-OUMTFz
S-1170B54PD-OUNTFz
S-1170B55PD-OUOTFz
1.5 V 1.0%
1.6 V 1.0%
1.7 V 1.0%
1.8 V 1.0%
1.9 V 1.0%
2.0 V 1.0%
2.1 V 1.0%
2.2 V 1.0%
2.3 V 1.0%
2.4 V 1.0%
2.5 V 1.0%
2.6 V 1.0%
2.7 V 1.0%
2.8 V 1.0%
2.9 V 1.0%
3.0 V 1.0%
3.1 V 1.0%
3.2 V 1.0%
3.3 V 1.0%
3.4 V 1.0%
3.5 V 1.0%
3.6 V 1.0%
3.7 V 1.0%
3.8 V 1.0%
3.9 V 1.0%
4.0 V 1.0%
4.1 V 1.0%
4.2 V 1.0%
4.3 V 1.0%
4.4 V 1.0%
4.5 V 1.0%
4.6 V 1.0%
4.7 V 1.0%
4.8 V 1.0%
4.9 V 1.0%
5.0 V 1.0%
5.1 V 1.0%
5.2 V 1.0%
5.3 V 1.0%
5.4 V 1.0%
5.5 V 1.0%
Remark 1. Please contact our sales office for products with an output voltage other than those
specified above or type A products.
2. x: G or U
z: G or S
3. Please select products of environmental code = U for Sn 100%, halogen-free products.
5
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Pin Configurations
Table 2
Symbol
SOT-89-5
Top view
Pin No.
Description
ON/OFF pin
5
4
1
2
3
4
5
ON/OFF
VSS
NC*1
GND pin
No connection
Input voltage pin
Output voltage pin
VIN
VOUT
*1. The NC pin is electrically open.
The NC pin can be connected to VIN pin or VSS pin.
1
2
3
Figure
2
6-Pin HSON(A)
Top view
Table 3
6
5
4
Pin No.
Symbol
VOUT*1
VOUT*1
ON/OFF
VSS
Description
Output voltage pin
Output voltage pin
ON/OFF pin
1
2
3
4
5
6
GND pin
VIN*2
Input voltage pin
Input voltage pin
1
2
3
VIN*2
Bottom view
1
2
3
*1. Short pins 1 and 2.
*2. Short pins 5 and 6.
*1
*2
6
5
4
*1. Connect the exposed thermal die
pad at shadowed area to the
board, and set electric potential
open or VSS.
However, do not use it as the
function of electrode.
*2. Be careful of the contact with
other wires because the pinch
lead has the same electric
potential as VSS.
Figure
3
6
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Absolute Maximum Ratings
Table 4
(Ta 25C unless otherwise specified)
Parameter
Input voltage
Symbol
VIN
VON/OFF
VOUT
Absolute Maximum Rating
Unit
V
V
VSS 0.3 to VSS 7
VSS 0.3 to VIN 0.3
VSS 0.3 to VIN 0.3
Output voltage
V
Power
dissipation
SOT-89-5
6-Pin HSON(A)
PD
1000 *1
mW
Operation ambient temperature
Storage temperature
Topr
Tstg
40 to 85
40 to 125
C
C
*1. At mounted on printed circuit board
[Mounted board]
(1) Board size :
40 mm×40 mm×t1.6 mm
(2) Cu wiring shear : 180 % at both sides
Caution The absolute maximum ratings are rated values exceeding which the product could suffer
physical damage. These values must therefore not be exceeded under any conditions.
1200
SOT-89-5
6-Pin HSON(A)
1000
800
600
400
200
0
Power
Dissipation
PD (mW)
0
50
100
150
Ambient Temperature Ta (C)
Power Dissipation of Package (Mounted on Printed Circuit Board)
Thermal shutdown circuit may operate when junction temperature is 150 C.
Figure
4
Caution
7
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Electrical Characteristics
Table 5
(Ta 25C unless otherwise specified)
Test
Circuit
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Unit
VOUT(S) VOUT(S) VOUT(S)
Output voltage*1
Output current*2
VOUT(E)
IOUT
VIN VOUT(S) 1.0 V, IOUT 100 mA
V
1
0.99
800*5
1.01
VIN VOUT(S) 1.0 V
VOUT(S) 1.5 V
mA
V
3
1
1
1
1
1
1
0.35
0.30
0.25
0.20
0.15
0.12
0.45
0.35
0.30
0.26
0.22
0.18
VOUT(S) 1.6 V
V
VOUT(S) 1.7 V
1.8 V VOUT(S) 2.0 V
V
Dropout voltage*3
Vdrop
IOUT 300 mA
V
2.1 V VOUT(S) 2.9 V
3.0 V VOUT(S) 5.5 V
VOUT(S) 0.5 V VIN 6.5 V,
IOUT 100 mA
V
V
VOUT1
VINVOUT
Line regulation
Load regulation
0.05
30
0.3
100
%/V
mV
1
1
1
2
VIN VOUT(S) 1.0 V,
VOUT2
1.0 mA IOUT 300 mA
VIN VOUT(S) 1.0 V, IOUT 10 mA,
40C Ta 85C
VIN VOUT(S) 1.0 V, ON/OFF pin ON,
no load
VOUT
TaVOUT
Output voltage
ppm
/ C
150
80
temperature coefficient*4
Current consumption
during operation
Current consumption
during power-off
Input voltage
ISS1
160
A
VIN VOUT(S) 1.0 V, ON/OFF pin OFF,
no load
ISS2
VIN
0.1
1.0
6.5
A
V
2
4
2.0
1.5
ON/OFF pin
input voltage “H”
ON/OFF pin
input voltage “L”
ON/OFF pin
input current “H”
ON/OFF pin
VSH
VIN VOUT(S) 1.0 V, RL 1.0 k
VIN VOUT(S) 1.0 V, RL 1.0 k
VIN 6.5 V, VON/OFF 6.5 V
VIN 6.5 V, VON/OFF 0 V
V
VSL
ISH
ISL
0.1
0.1
0.3
0.1
0.1
V
4
4
A
A
dB
dB
mA
C
C
4
input current “L”
VIN
VOUT(S)
1.0 kHz,
Vrip 0.5 Vrms,
IOUT 100 mA
1.0 V,
1.5 V
3.1 V
VOUT(S)
VOUT(S)
3.0 V
5.5 V
70
5
f
RR
Ripple rejection
65
5
VIN VOUT(S) 1.0 V, ON/OFF pin ON,
VOUT 0 V
Short-circuit current
Ishort
TSD
TSR
350
150
120
3
Thermal shutdown
detection temperature
Thermal shutdown
release temperature
Junction temperature
Junction temperature
8
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
*1. VOUT(S): Set output voltage
VOUT(E): Actual output voltage
Output voltage when fixing IOUT ( 100 mA) and inputting VOUT(S) 1.0 V
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.
*3. Vdrop VIN1 (VOUT3 0.98)
VOUT3 is the output voltage when VIN VOUT(S) 1.0 V and IOUT 300 mA.
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input
voltage.
*4. A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
VOUT
Ta
VOUT
Ta VOUT
mV/°C *1 = VOUT(S)
V
[ ]
*2
ppm/°C *3 1000
[ ]
[
]
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
*5. The output current can be at least this value.
Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the
power dissipation of the package when the output current is large.
This specification is guaranteed by design.
9
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Test Circuits
1.
A
VIN
VOUT
VSS
V
ON/OFF
Set to ON
Figure
5
2.
A
VIN
ON/OFF
VOUT
VSS
Set to
VIN or GND
Figure
6
3.
VIN
VOUT
A
V
ON/OFF
VSS
Set to ON
Figure
7
4.
VOUT
VIN
RL
A
ON/OFF
V
VSS
Figure
8
VOUT
VSS
5.
VIN
ON/OFF
Set to ON
V
RL
Figure
9
10
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Standard Circuit
Output
Input
VIN
VOUT
*2
*1
ON/OFF
CL
CIN
VSS
GND
Single GND
*1. CIN is a capacitor for stabilizing the input.
*2. A ceramic capacitor of 4.7 F or more can be used for CL.
Figure 10
Caution The above connection diagram and constant will not guarantee successful operation.
Perform thorough evaluation using the actual application to set the constant.
Condition of Application
Input capacitor (CIN):
Output capacitor (CL):
ESR of output capacitor:
4.7 F or more
4.7 F or more
0.5 or less
Caution Generally a series regulator may cause oscillation, depending on the selection of external
parts. Check that no oscillation occurs with the application using the above capacitor.
Selection of Input and Output Capacitors (CIN, CL)
The S-1170 Series requires an output capacitor between the VOUT pin and the VSS pin for phase
compensation. A ceramic capacitor with a capacitance of 4.7 F or more provides a stable operation in all
temperature ranges. When using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic
capacitor, the capacitance must be 4.7 F or more, and the ESR must be 0.5 or less.
The output overshoot and undershoot values, which are transient response characteristics, vary depending
on the output capacitor value. The required capacitance value for the input capacitor differs depending on
the application.
The recommended value for an application is CIN 4.7 F and CL 4.7 F, however, perform a thorough
evaluation using the actual device, including evaluation of temperature characteristics.
11
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Explanation of Terms
1. Low dropout voltage regulator
This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.
2. Low ESR
A capacitor whose ESR (Equivalent Series Resistance) is low. The S-1170 Series enables use of a low
ESR capacitor, such as a ceramic capacitor, for the output-side capacitor (CL). A capacitor whose ESR
is 0.5 or less can be used.
3. Output voltage (VOUT
)
The accuracy of the output voltage is ensured at 1.0% under the specified conditions of fixed input
voltage*1, fixed output current, and fixed temperature.
*1. Differs depending the product.
Caution If the above conditions change, the output voltage value may vary and exceed the
accuracy range of the output voltage. Refer to “ Electrical Characteristics” and “
Characteristics (Typical Data)” for details.
VOUT1
4. Line regulation
V V
OUT
IN
Indicates the dependency of the output voltage on the input voltage. That is, the values show how much
the output voltage changes due to a change in the input voltage with the output current remaining
unchanged.
5. Load regulation (VOUT2
)
Indicates the dependency of the output voltage on the output current. That is, the values show how
much the output voltage changes due to a change in the output current with the input voltage remaining
unchanged.
6. Dropout voltage (Vdrop
)
Indicates the difference between input voltage (VIN1) and the output voltage when; decreasing input
voltage (VIN) gradually until the output voltage has dropped out to the value of 98% of output voltage
(VOUT3), which is at VIN = VOUT(S) 1.0 V.
Vdrop VIN1 (VOUT3 0.98)
12
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
VOUT
7. Output voltage temperature coefficient
Ta V
OUT
The shaded area in Figure 11 is the range where VOUT varies in the operation temperature range when the
output voltage temperature coefficient is 150 ppm/C.
Example of S-1170B28 typ. product
VOUT
[V]
0.42 mV/C
*1
VOUT(E)
0.42 mV/C
40
25
85
Ta [C]
*1. VOUT(E) is the value of the output voltage measured at Ta = 25C.
Figure 11
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
VOUT
Ta
VOUT
Ta VOUT
mV/°C *1 = VOUT(S)
V
[ ]
*2
ppm/°C *3 1000
[ ]
[
]
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
13
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Operation
1. Basic operation
Figure 12 shows the block diagram of the S-1170 Series.
The error amplifier compares the reference voltage (Vref) with feedback voltage (Vfb), which is the output
voltage resistance-divided by feedback resistors (Rs and Rf). It supplies the gate voltage necessary to
maintain the constant output voltage which is not influenced by the input voltage and temperature
change, to the output transistor.
VIN
*1
Current
supply
Error
VOUT
amplifier
Vref
Rf
Vfb
Reference voltage
circuit
Rs
VSS
*1. Parasitic diode
Figure 12
2. Output transistor
In the S-1170 Series, a low on-resistance P-channel MOS FET is used as the output transistor.
Be sure that VOUT does not exceed VIN 0.3 V to prevent the voltage regulator from being damaged due
to reverse current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential
of VOUT became higher than VIN.
14
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
3. ON/OFF pin
This pin starts and stops the regulator.
When the ON/OFF pin is set to OFF level, the entire internal circuit stops operating, and the built-in
P-channel MOS FET output transistor between the VIN pin and the VOUT pin is turned off, reducing
current consumption significantly. The VOUT pin becomes the VSS level due to the internally divided
resistance of several hundreds k between the VOUT pin and the VSS pin.
The structure of the ON/OFF pin is as shown in Figure 13. Since the ON/OFF pin is neither pulled down
nor pulled up internally, do not use it in the floating status. In addition, note that the current consumption
increases if a voltage of 0.3 V to VIN 0.3 V is applied to the ON/OFF pin. When not using the ON/OFF
pin, connect it to the VSS pin in the product A type, and connect it to the VIN pin in B type.
Table 6
Product Type
ON/OFF Pin
“L”: ON
Internal Circuit
Operate
Stop
VOUT Pin Voltage
Set value
Current Consumption
A
A
B
B
ISS1
ISS2
ISS2
ISS1
“H”: OFF
“L”: OFF
“H”: ON
VSS level
Stop
VSS level
Operate
Set value
VIN
ON/OFF
VSS
Figure 13
15
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
4. Thermal shutdown circuit
The S-1170 Series implements a thermal shutdown circuit to protect the device from damage due to
overheating. When the junction temperature rises to 150C (typ.), the thermal shutdown circuit operates
and the regulator operation stops. When the junction temperature drops to 120C (typ.), the thermal
shutdown circuit is released and the regulator operation resumes.
If the thermal shutdown circuit starts operating due to self-heating, the regulator operation stops and the
output voltage falls. When the regulator operation has stopped, no self-heat is generated and the
temperature of the IC is lowered. When the temperature has dropped, the thermal shutdown circuit is
released, the regulator operation resumes, and self-heat is generated again. By repeating this procedure,
the output voltage waveform forms pulses. Stop or restart of regulation continues unless decreasing
either or both of the input voltage and the output current in order to reduce the internal power
consumption, or decreasing the ambient temperature.
Table 7
Thermal Shutdown Circuit
Operating: 150C (typ.)
Released: 120C (typ.)
VOUT Pin Voltage
VSS level
Set value
16
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Precautions
Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is
low. When mounting an output capacitor between the VOUT pin and the VSS pin (CL) and a capacitor
for stabilizing the input between the VIN pin and the VSS pin (CIN), the distance from the capacitors to
these pins should be as short as possible.
Note that generally the output voltage may increase when a series regulator is used at low load current
(1.0 mA or less).
Note that the output voltage may increase due to the leakage current from an output driver even if the
ON/OFF pin is at OFF level when a series regulator is used at high temperature.
Generally a series regulator may cause oscillation, depending on the selection of external parts. The
following conditions are recommended for the S-1170 Series. However, be sure to perform sufficient
evaluation under the actual usage conditions for selection, including evaluation of temperature
characteristics.
Input capacitor (CIN):
Output capacitor (CL):
4.7 F or more
4.7 F or more
Equivalent series resistance (ESR): 0.5 or less
The voltage regulator may oscillate when the impedance of the power supply is high and the input
capacitance is small or an input capacitor is not connected.
Overshoot may occur in the output voltage momentarily if the voltage is rapidly raised at power-on or
when the power supply fluctuates. Sufficiently evaluate the output voltage at power-on with the actual
device.
The application conditions for the input voltage, the output voltage, and the load current should not
exceed the package power dissipation.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
electrostatic protection circuit.
In determining the output current, attention should be paid to the output current value specified in Table
5 in “ Electrical Characteristics” and footnote *5 of the table.
ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement
by products including this IC of patents owned by a third party.
17
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Characteristics (Typical Data)
(1) Output voltage vs. Output current (when load current increases)
S-1170B15 (Ta 25C)
S-1170B30 (Ta 25C)
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
VIN 3.5 V
VIN 2.0 V
6.5 V
4.0 V
2.5 V
6.5 V
0
200
400
600
800 1000 1200
0
200
400
600
800 1000 1200
IOUT [mA]
IOUT [mA]
S-1170B50 (Ta 25C)
6
5
4
3
2
1
0
Remark In determining the output current, attention
should be paid to the following.
VIN 5.5 V
6.0 V
6.5 V
1. The minimum output current value and
footnote *5 in Table 5 in “ Electrical
Characteristics”
2. The package power dissipation
1200
800 1000
0
200
400
600
IOUT [mA]
(2) Output voltage vs. Input voltage
S-1170B15 (Ta 25C)
S-1170B30 (Ta 25C)
3.1
3.0
2.9
1.6
1.5
1.4
IOUT 1 mA
IOUT 1 mA
1.3
2.8
10 mA
100 mA
10 mA
100 mA
1.2
2.7
1.1
2.6
2.5
300 mA
300 mA
1.0
1.0
1.5
2.0
VIN [V]
2.5
3.0
3.5
2.5
3.0
3.5
4.0
4.5
5.0
VIN [V]
S-1170B50 (Ta 25C)
5.1
5.0
4.9
IOUT 1 mA
10 mA
4.8
4.7
4.6
4.5
100 mA
300 mA
4.5
5.0
5.5
VIN [V]
6.0
6.5
7.0
18
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
(3) Dropout voltage vs. Output current
S-1170B15
S-1170B30
0.6
0.5
0.4
0.3
0.2
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
25C
25C
85C
85C
40C
40C
0
0
100 200 300 400 500 600 700 800
IOUT [mA]
0
100 200 300 400 500 600 700 800 900
IOUT [mA]
900
S-1170B50
0.6
0.5
0.4
0.3
0.2
0.1
25C
85C
40C
0
0
100 200 300 400 500 600 700 800
IOUT [mA]
900
(4) Dropout voltage vs. Set output voltage
0.8
800 mA
600 mA
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
300 mA
10 mA
1
2
3
5
6
0
4
VOUT(S) [V]
19
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
(5) Output voltage vs. Ambient temperature
S-1170B15 (IOUT 10 mA)
S-1170B30 (IOUT 10 mA)
1.70
1.65
1.60
1.55
1.50
1.45
1.40
1.35
1.30
3.20
3.15
3.10
3.05
3.00
2.95
2.90
2.85
2.80
0
25
50
75 85
0
25
50
75 85
40 25
40
25
Ta [C]
Ta [C]
S-1170B50 (IOUT 10 mA)
5.20
5.15
5.10
5.05
5.00
4.95
4.90
4.85
4.80
0
50
40
25
75 85
25
Ta [C]
(6) Current consumption vs. Input voltage
S-1170B15 (Ta 25C)
S-1170B30 (Ta 25C)
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
VIN [V]
VIN [V]
S-1170B50 (Ta 25C)
80
70
60
50
40
30
20
10
0
0
1
2
3
4
5
6
7
VIN [V]
20
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
(7) Ripple rejection
S-1170B15 (Ta 25C)
S-1170B30 (Ta 25C)
VIN 2.5 V, COUT 4.7 F
VIN 4.0 V, COUT 4.7 F
100
80
100
80
IOUT 50 mA
IOUT 50 mA
60
60
100 mA
100 mA
40
20
0
40
20
0
10
1k
100
10k
100k
1M
10
1k
1M
100
10k
100k
Frequency [Hz]
Frequency [Hz]
S-1170B50 (Ta 25C)
VIN 6.0 V, COUT 4.7 F
100
80
IOUT 50 mA
60
100 mA
40
20
0
1k
10
100
10k
100k
1M
Frequency [Hz]
21
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
Reference Data
(1) Input transient response characteristics
S-1170B15
IOUT 100 mA, tr tf 5.0 s, COUT 4.7 F, CIN 4.7 F
S-1170B30
IOUT 100 mA, tr tf 5.0 s, COUT 4.7 F, CIN 4.7 F
6.0
3.08
3.06
3.04
3.02
3.00
2.98
2.96
1.62
1.60
1.58
1.56
1.54
1.52
1.50
1.48
1.46
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
5.0
4.0
3.0
2.0
1.0
0
VIN
VIN
VOUT
VOUT
0
10
20
30
40
50
60
0
10
20
30
40
50
60
20 10
20 10
t [s]
t [s]
S-1170B50
IOUT 100 mA, tr tf = 5.0 s, COUT 4.7 F, CIN 4.7 F
5.12
5.10
5.08
5.06
5.04
5.02
5.00
4.98
4.96
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
VIN
VOUT
0
10
20
30
40
50
60
20 10
t [s]
(2) Load transient response characteristics
S-1170B15 (Ta 25C)
S-1170B30 (Ta 25C)
VIN 2.5 V, COUT 4.7 F, CIN 4.7 F, IOUT 50 mA 100 mA
VIN 4.0 V, COUT 4.7 F, CIN 4.7 F, IOUT 50 mA 100 mA
3.20
3.15
3.10
3.05
3.00
2.95
2.90
150
100
50
1.70
1.65
1.60
1.55
1.50
1.45
1.40
150
100
50
IOUT
IOUT
0
0
VOUT
VOUT
50
100
150
50
100
150
0
20 40
60
80 100 120 140 160
0
20 40
60 80 100 120 140 160
20
20
t [s]
t [s]
S-1170B50 (Ta 25C)
VIN 6.0 V, COUT 4.7 F, CIN 4.7 F, IOUT 50 mA 100 mA
150
100
50
5.20
5.15
5.10
5.05
5.00
4.95
IOUT
0
VOUT
50
100
150
4.90
20
0
20
40
60
80 100 120 140 160
t [s]
22
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.1_02
S-1170 Series
(3) ON/OFF pin transient response characteristics
S-1170B15 (Ta 25C)
S-1170B30 (Ta 25C)
VIN 2.5 V, COUT 4.7 F, CIN 4.7 F, IOUT 100 mA
VIN 4.0 V, COUT 4.7 F, CIN 4.7 F, IOUT 100 mA
5
4
3
7
6
6
4
2
VON/OFF
VON/OFF
5
4
2
3
1
0
2
3
2
4
6
0
2
1
1
1
2
3
VOUT
VOUT
0
0
1
1
10
0
10 20 30 40 50 60 70 80 90
10
0
10 20 30 40 50 60 70 80 90
t [s]
t [s]
S-1170B50 (Ta 25C)
VIN 6.0 V, COUT 4.7 F, CIN 4.7 F, IOUT 100 mA
9
6
7
5
3
VON/OFF
0
3
3
6
VOUT
1
1
0
10 20 30 40 50 60 70 80 90
10
t [s]
S-1170B15 (Ta 25C)
S-1170B30 (Ta 25C)
VIN 2.5 V, COUT 4.7 F, CIN 4.7 F, IOUT 300 mA
VIN 4.0 V, COUT 4.7 F, CIN 4.7 F, IOUT 300 mA
5
4
3
7
6
6
4
2
VON/OFF
VON/OFF
5
4
2
3
1
0
2
3
2
4
6
0
2
1
1
1
2
3
VOUT
VOUT
0
0
1
1
0
10 20 30 40 50 60 70 80 90
10
0
10 20 30 40 50 60 70 80 90
10
t [s]
t [s]
S-1170B50 (Ta 25C)
VIN 6.0 V, COUT 4.7 F, CIN 4.7 F, IOUT 300 mA
9
6
7
5
3
VON/OFF
0
3
3
6
VOUT
1
1
0
10 20 30 40 50 60 70 80 90
10
t [s]
23
4.5±0.1
1.6±0.2
1.5±0.1
5
4
0.3
45°
1
2
3
1.5±0.1 1.5±0.1
0.4±0.05
0.4±0.1
0.4±0.1
0.45±0.1
No. UP005-A-P-SD-2.0
SOT895-A-PKG Dimensions
UP005-A-P-SD-2.0
TITLE
No.
ANGLE
mm
UNIT
ABLIC Inc.
4.0±0.1(10 pitches : 40.0±0.2)
+0.1
-0
ø1.5
2.0±0.05
+0.1
-0
0.3±0.05
2.0±0.1
8.0±0.1
ø1.5
4.75±0.1
3
4
2
1
5
Feed direction
No. UP005-A-C-SD-2.0
TITLE
SOT895-A-Carrier Tape
UP005-A-C-SD-2.0
No.
ANGLE
mm
UNIT
ABLIC Inc.
16.5max.
13.0±0.3
Enlarged drawing in the central part
(60°)
(60°)
No. UP005-A-R-SD-1.1
TITLE
SOT895-A-Reel
UP005-A-R-SD-1.1
No.
ANGLE
QTY.
1,000
mm
UNIT
ABLIC Inc.
+0.1
-0.05
0.80
2.90±0.1
(1.5)
0.15±0.05
0.5typ.
+0.1
-0.05
0.30
The exposed thermal die pad has different
electric potential depending on the product.
Confirm specifications of each product.
Do not use it as the function of electrode.
0.95±0.05
No. PD006-A-P-SD-5.0
TITLE
HSON6A-A-PKG Dimensions
PD006-A-P-SD-5.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
1.5±0.1
4.0±0.1
2.0±0.05
ø1.55±0.05
0.2±0.05
ø1.05±0.05
4.0±0.1
3.3±0.1
3
1
6
4
Feed direction
No. PD006-A-C-SD-2.0
TITLE
HSON6A-A-Carrier Tape
PD006-A-C-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PD006-A-R-SD-1.0
TITLE
HSON6A-A-Reel
PD006-A-R-SD-1.0
No.
ANGLE
UNIT
QTY.
3,000
mm
ABLIC Inc.
Disclaimers (Handling Precautions)
1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and application
circuit examples, etc.) is current as of publishing date of this document and is subject to change without notice.
2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not responsible for damages caused by the reasons other than the products described herein
(hereinafter "the products") or infringement of third-party intellectual property right and any other right due to the use
of the information described herein.
3. ABLIC Inc. is not responsible for damages caused by the incorrect information described herein.
4. Be careful to use the products within their specified ranges. Pay special attention to the absolute maximum ratings,
operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not responsible for damages caused by failures and / or accidents, etc. that occur due to the use of the
products outside their specified ranges.
5. When using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7. The products must not be used or provided (exported) for the purposes of the development of weapons of mass
destruction or military use. ABLIC Inc. is not responsible for any provision (export) to those whose purpose is to
develop, manufacture, use or store nuclear, biological or chemical weapons, missiles, or other military use.
8. The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses. Do
not apply the products to the above listed devices and equipments without prior written permission by ABLIC Inc.
Especially, the products cannot be used for life support devices, devices implanted in the human body and devices
that directly affect human life, etc.
Prior consultation with our sales office is required when considering the above uses.
ABLIC Inc. is not responsible for damages caused by unauthorized or unspecified use of our products.
9. Semiconductor products may fail or malfunction with some probability.
The user of the products should therefore take responsibility to give thorough consideration to safety design including
redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or
death, fires and social damage, etc. that may ensue from the products' failure or malfunction.
The entire system must be sufficiently evaluated and applied on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc.
The information described herein does not convey any license under any intellectual property rights or any other
rights belonging to ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any
part of this document described herein for the purpose of disclosing it to a third-party without the express permission
of ABLIC Inc. is strictly prohibited.
14. For more details on the information described herein, contact our sales office.
2.2-2018.06
www.ablic.com
相关型号:
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_2.jpg)
S-1170B16UC-OTBTFG
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
SII
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_2.jpg)
S-1170B16UC-OTBTFX
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
ABLIC
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_2.jpg)
S-1170B17PD-OTCTFG
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
SII
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_2.jpg)
S-1170B17PD-OTCTFZ
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
ABLIC
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_2.jpg)
S-1170B17UC-OTCTFG
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
SII
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_2.jpg)
S-1170B17UC-OTCTFX
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
ABLIC
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_2.jpg)
S-1170B18PD-OTDTFG
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
SII
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_2.jpg)
S-1170B18PD-OTDTFZ
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
ABLIC
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_2.jpg)
S-1170B18UC-OTDTFG
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
SII
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00354/img/page/S-1170B27UC-_2174048_files/S-1170B27UC-_2174048_2.jpg)
S-1170B18UC-OTDTFX
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
ABLIC
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00107/img/page/S-1170B20PD-OTFTFG_582837_files/S-1170B20PD-OTFTFG_582837_2.jpg)
S-1170B19PD-OTETFG
HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
SII
©2020 ICPDF网 联系我们和版权申明