031746 [AAVID]
Heat Sink,;型号: | 031746 |
厂家: | AAVID THERMALLOY, LLC |
描述: | Heat Sink, |
文件: | 总6页 (文件大小:3130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BGA HEAT SINK GUIDE
FOR NETWORKING AND COMPUTER PCBS
T H E R M A L P R O D U C T S, I N C.
BGA HEAT SINK GUIDE - POWER LESS THAN 5 WATTS
Aavid’s family of BGA heat sinks offers a wide range of cooling solutions for motherboard, video card,
and networking applications. Aavid's Push-Pin™ attachment, available on many of the heat sinks, uses
a standard 3.12 mm diameter hole pattern, allowing accommodation of future cooling requirements
without board redesign. Plastic pins provide low-cost attachment, while brass pins provide higher
reliability in extreme conditions.
ORDERING INFORMATION
Use the 6 digit part number in the upper left hand corner for ordering.
Thermal resistance is calculated at .25 m/s of airflow and does not include the interface. Due to
various heat dissipation paths within a BGA device, please test our heat sink in your application.
For different interface material, fan options, color, or clipping variations, please contact your local
application engineer.
PART NUMBER 028095 (373224M00000)
• 28 mm x 28 mm x 6 mm
• Use with epoxy attachment
28.0
• 15.2°C/W performance
• Green anodized finish
28.0
6.0
PART NUMBER 031612 (IBAA-2)
• 28 mm x 28 mm x 8 mm
• Use with epoxy attachment
• 13.5°C/W performance
• Wash finish
28.0
28.0
8.0
PART NUMBER 030948 (10-6326-27) PLASTIC PUSH-PINS
030949 (10-6326-28) BRASS PUSH-PINS
• 28 mm x 28 mm x 6 mm
• Push-Pin attachment
• 15.0°C/W performance
• Pre-applied phase-change
interface material
28.0
• Black anodized finish
6.0
BGA HEAT SINK GUIDE - POWER LESSTHAN 8 WATTS
PART NUMBER 031609 (10-6327-01) PLASTIC PUSH-PINS
• 28 mm x 28 mm x 10 mm
• Push-Pin attachment
• 12.4°C/W performance
• Black anodized finish
28.0
10.0
PART NUMBER 031611 (10-5571-02) DOUBLE-SIDEDTAPE
028096 (373324M00000) NO INTERFACE FOR EPOXY ATTACHMENT
• 37.4 mm x 37.4mm x 6 mm
• 11.2°C/W performance
• Green anodized finish
37.4
37.4
6.0
PART NUMBER 031610 (10-5610-02)
• 37.4mm x 37.4mm x 8.5 mm
• Unique clip attachment
• 11.2 °C/W performance
• Green anodized finish
37.4
8.5
BGA HEAT SINK GUIDE - POWER LESSTHAN 10 WATTS
PART NUMBER 031613 (10-5597-02) PLASTIC PUSH-PIN, NO INTERFACE MATERIAL
APPLIED 031614 (10-5597-22) PLASTIC PUSH-PIN, PHASE-CHANGE INTERFACE
APPLIED 031615 (10-5597-33) BRASS PUSH-PIN, PHASE-CHANGE INTERFACE APPLIED
• 37.4 mm x 37.4 mm x 6 mm
• Push-Pin attachment
• 11.0°C/W performance
• 031613 has green anodized finish
• 031614 and 031615 have gold
anodized finishes
37.4
6.0
PART NUMBER 030818 (10-5607-04) PLASTIC PUSH-PIN
030819 (10-5607-05) BRASS PUSH-PIN
• 37.4 mm x 37.4mm x 10 mm
• 9.7°C/W performance
• Black anodized finish
• Phase-change interface
material: 28 mm x 28 mm
37.4
10.0
PART NUMBER 031746 SINGLE-BALL FAN, DOUBLE-SIDEDTAPE
• 40 mm x 40 mm x 11.5 mm
• 5-Volt, 40 mm x 40 mm x
7 mm DC fan
40.0
• 3-Pin connector: 1-red(+),
2-black(-), 3-sensor
38.7
• Sensor provides two pulses
per revolution
• 3.8°C/W performance
11.5
• Black anodized finish
Note: All Aavid fans can be customized to your application.
Customizable features include: fan wiring, fan speed, sensor options,
bearing style, voltage, connector type, etc.
Contact your local application engineer for information.
BGA HEAT SINK GUIDE - PO W ER LESS THAN 15 W ATTS
PART NUMBER 031608 (11-5602-48) SINGLE-BALL FAN
031607 (11-5602-47) DUAL-BALL FAN
• 40 mm x 40 mm x 15 mm
• 5-Volt, 40 mm x 40 mm x10 mm
DC fan
1
2
3
40.0
• 3-pin Molex connector:
1-red(+), 2-black(-), 3-sensor
• 1-black(-), 2-red(+), 3-sensor
15.0
• 3.5°C/W performance
• Black anodized finish
37.4
PART NUMBER 031606 (11-5602-46) SINGLE-BALL FAN
031605 (11-5602-45) DUAL-BALL FAN
• Plastic Push-Pin
1
2
3
• 40 mm x 40 mm x 15.0 mm
• 5 Volt 40 mm x 40 mm x
10 mm DC fan
• 3-pin Molex connector:
1-black(-), 2-red(+), 3-sensor
40.0
• Sensor is two pulses per
revolution
15.0
• 3.4C°/W performance
• Black anodized finish
PART NUMBER 031660 (11-5602-50) PLASTIC PUSH-PIN
031661 (11-5602-51) BRASS PUSH-PIN
• One ball bearing
• 40 mm x 40 mm x 11.5 mm
• 12 Volt DC fan
1
2
• 2-pin Molex connector:
1-red(+), 2-black(-)
• Phase-change interface material
37.4
• 3.7°C/W performance
• Black anodized finish
11.5
BGA HEAT SINK GUIDE - POWER LESS THAN 15 WATTS
PART NUMBER 031659 (11-5608-13) PLASTIC PUSH-PIN
031658 (11-5608-07) BRASS PUSH-PIN
• 40 mm x 40 mm x 11.5 mm
• 12Volt, 40 mm x 40 mm x
7 mm DC fan
• 3-pin Molex connector:
1-red(+), 2-black(-), 3-sensor
• Sensor provides two pulses
per revolution
20.0 41.4
• 3.5 °C/W performance
45.2
50.8
• Black anodized finish
11.5
Note: Aavid has several passive heat sinks using this alternate
Push-Pin hole pattern.Contact your local application engineer
for information.
T H E R M A L P R O D U C T S, I N C.
This data sheet represents only one of a broad range of products we make to cool electronics. Our representatives can help you configure a
complete cooling solution for your individual applications. For assistance, contact any one of them from our web site or at the locations below.
Aavid Thermal Products, Inc., along with Fluent Inc.’s Icepak thermal design software and Applied Thermal Technologies, Inc. thermal design and validation services, make up
The Total Integrated Solution for Cooling Electronics™. For more information on how to put our strengths to work for you,
visit our web site at: http://www.aavid.com;TEL: (603) 224-9988,
or contact Fluent at: http://www.icepak.com;TEL: (603) 643-2600, or Applied at: http://www.thermalcooling.com;TEL: (603) 666-4100.
For technical assistance, or placing an order, please visit our web site for the
local sales representative: http://www.aavid.com/reps/index.html
or distributor near you: http://www.aavid.com/distribs/index.html
Corporate Office - Aavid USA: 143 N. Main Street, Concord, NH 03301 TEL: (603) 224-9988 FAX: (603) 223-1738
International Locations:
Aavid Canada: 440 Hanlon Road • Woodbridge, Ontario • Canada L4L 3P6 • TEL: (905) 850-9595 • FAX: (905) 850-9599
Aavid Singapore: No. 5 Woodlands Industrial Park E1 757728 • TEL: (65)362 8388 • FAX: (65)362 8588
AavidTaiwan/Japan: 3F, No. 25, Lane 228, AnKang Road, NeiHu,Taipei •114 Taiwan R.O.C. • TEL: (886) 22-793-5677 • FAX: (886) 22-793-3460
Aavid Europe: Unit C Hillbottom Road • Sands Industrial Estate • High Wycombe, Bucks, England HP12 4HS • TEL: (44) 1494-474747 • FAX: (44) 1494-474748
PLEASE NOTE: Our customers are reminded that they bear the responsibility for testing Aavid Thermal Products’ products for proposed use.Any information furnished by Aavid is believed to be accurate and
reliable, but our customers must bear all responsibility for use and applications of Aavid products.AAVID MAKES NO WARRANTIES AS TO THE FITNESS, MERCHANTABILITY, OR SUITABILITY OF ANY
AAVID PRODUCTS FOR ANY SPECIFIC OR GENERAL USES.AAVID SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. All Aavid products are sold pursuant
to the Aavid Domestic Terms and Conditions of Sale in effect from time to time, a copy of which shall be furnished upon request (8911A).
Push-Pin is a trademark of Aavid Thermal Products, Inc.
Copyright © Aavid Thermal Products, Inc. October 1999 (Revision 1).
All icons, drawings, illustrations, and trademarks are the property of Aavid Thermal Products, Inc. and may not be reproduced without express written permission.
相关型号:
031798-1
Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9 und AISG-Spezifikation, IP 68
LUMBERG
031798-105-3
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP67/IP68
LUMBERG
031798-108-1
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP67/IP68
LUMBERG
031798-1_18
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP67/IP68
LUMBERG
031798-2
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP67/IP68
LUMBERG
031798-206-1
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP67/IP68
LUMBERG
031798-208-1
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP67/IP68
LUMBERG
031799-2
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP67/IP68
LUMBERG
031799-208-1
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP67/IP68
LUMBERG
0318
Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9 und AISG-Spezifikation, IP 68
LUMBERG
0318-105-3
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP67/IP68
LUMBERG
©2020 ICPDF网 联系我们和版权申明