DA-0518S42TA

更新时间:2024-09-18 08:24:11
品牌:AAC
描述:Detector Log Video Amplifiers (DLVA)

DA-0518S42TA 概述

Detector Log Video Amplifiers (DLVA) 检测日志视频放大器( DLVA )

DA-0518S42TA 数据手册

通过下载DA-0518S42TA数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Detector Log Video Amplifiers (DLVA)  
The content of this specification may change without notification7/01/09  
Features  
DLVA  
Advanced Microwave Hybrid Integrated  
Circuits Technology  
Detector Log Video Amplifiers (DLVA)  
Frequency Range from 0.5 to 18GHz  
Superior Log Linearity  
Wide Dynamic Range  
Wide Bandwidth  
There are three basic typesof logarithmic amplifiers,  
Detector-Log Video Amplifiers (DLVAs)  
Successive Detection Logarithmic  
Low Current Consumption  
DC-Coupled DLVAs  
Amplifiers True Log Amplifiers (TLAs)  
High Performance  
A detector log video amplifier (DLVA) is a type of  
logarithmic amplifier in which the envelope of the  
input RF signal is detected by a standard "linear"  
diodedetector. The output of the detector is  
compressed in the video amplifier section, making  
input/output relationship similar to a logarithmic  
conversion. In general, the DLVA offers the  
High Reliability  
High Repeatability  
Compact Size And Light Weight  
Custom Design Available  
advantage of operating over the widest frequency  
range, but at the sacrifice of dynamic range.  
Applications  
Radar Systems  
Limited by the detecting range of square law of the  
input diode detector, typical dynamic range for a  
DLVA is approximately 40 dB.  
Navigation Systems  
Laboratory Measurement And Test Equipment  
Telecommunications And Data Communications  
Military And Instrumentation Systems  
Other Commercial Applications  
In quite a lot of usages, two log cascades are put in  
parallel with a RF amplifier incorporated in time of  
detection of the log cascade, so that the dynamic  
range can be extended to approx.70dB.  
The detected video sections of a DLVA can either be  
AC coupled, DC coupled, or pseudo DC coupled.  
Each has its advantages, depending upon the application  
(i.e., CW operation, temperature compensation, etc.).  
The basic configuration of a DLVA is simply a  
detector diode to convert the RF energy into a DC  
voltage followed by a video amplifier with a  
logarithmic transfer function. The combination results  
in a device which compresses a large RF signal  
range into a narrow range of video voltage.  
We have put considerable effort into designing a  
DC coupled DLVA with very low baseline drift.  
Employing a tunnel diode based detector circuit  
coupled with a very stable DLVA, high-speed  
miniature DC DLVA with good recovery  
characteristics is available.  
188 Technology Drive, Unit H, Irvine, CA 92618  
1
Tel: 949-453-9888 Š Fax: 949-453-8889 Š Email: sales@aacix.com  
American Accurate Components, Inc.  
Detector Log Video Amplifiers (DLVA)  
The content of this specification may change without notification7/01/09  
DLVA  
Coaxial  
0.5 to 18GHz  
Freq. Range  
TSS  
(dBm)  
Typ  
Linearity  
(dB)  
Max  
Dynamic  
Range  
(dBm)  
Log Linearity  
(dB)  
VSWR  
P/N  
Case  
(GHz)  
Max  
Max  
DA-0520S41NA  
0.5 - 2  
-41  
±2  
-39 - +5  
±0.7  
2.0:1  
DL1  
DA-0560S41NB  
DA-0518S42NA  
DA-2040S42NA  
DA-2040S42NB  
DA-2080S41NA  
DA-2018S41NA  
DA-4080S42NA  
DA-6012S41NA  
DA-6012S42NB  
DA-6018S42NA  
DA-6018S42NB  
DA-8012S41NA  
DA-8018S41NA  
DA-8018S41NB  
DA-1218S42NA  
DA-1218S42NB  
DA-0520D72N  
DA-2060D72N  
DA-4080D72N  
DA-2018D68N  
DA-6012D72N  
DA-6018D72N  
DA-8018D72N  
DA-1218D72N  
0.5 - 6  
0.5 - 2  
2 - 4  
-41  
-42  
-42  
-42  
-41  
-41  
-42  
-41  
-42  
-42  
-42  
-41  
-41  
-41  
-42  
-42  
-72  
-72  
-72  
-68  
-73  
-72  
-72  
-72  
±2  
±2  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-70 - +5  
-70 - +5  
-70 - +5  
-65 - +5  
-70 - +5  
-70 - +5  
-70 - +5  
-70 - +5  
±1.0  
±0.7  
±0.7  
±1.0  
±0.7  
±0.7  
±0.5  
±0.5  
±1.0  
±0.5  
±1.0  
±0.5  
±0.5  
±1.0  
±0.5  
±1.0  
±1.0  
±1.0  
±1.0  
±1.0  
±1.0  
±1.0  
±1.0  
±1.0  
2.5:1  
3.5:1  
2.0:1  
2.5:1  
2.5:1  
3.5:1  
2.5:1  
3.0:1  
2.5:1  
3.5:1  
2.5:1  
2.5:1  
2.5:1  
2.5:1  
2.5:1  
2.5:1  
2.2  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL3  
DL3  
DL3  
DL3  
DL3  
DL3  
DL3  
DL3  
±2  
2 - 4  
±2  
2 - 8  
±2  
2 - 18  
4 - 8  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2  
6 - 12  
6 - 12  
6 - 18  
6 - 18  
8 - 12  
8 - 18  
8 - 18  
12 - 18  
12 - 18  
0.5 - 2  
2 - 6  
±2  
2.2  
4 - 8  
±2  
2.2  
2 - 18  
6 - 12  
6 - 18  
8 - 18  
12 - 18  
±2.5  
±2  
2.5  
2.2  
±2  
2.3  
±2  
2.2  
±2  
2.2  
Rise Time: 29ns(Typ)  
Delay Time: <30ns  
Log Slope: 50mV/dB  
General Specifications  
Maximum CW Input(No Damage):  
Recovery Time: 500ns(@+15dB)  
+20dBm  
Power Supply:  
±
12V DC  
Notes:  
1. Operating Temperature  
2. Custom Designs Available  
:
-55 OC to +85 OC. Storage Temperature -60 OC to +90 OC.  
:
2
188 Technology Drive, Unit H, Irvine, CA 92618  
Tel: 949-453-9888 Š Fax: 949-453-8889 Š Email: sales@aacix.com  
American Accurate Components, Inc.  
Detector Log Video Amplifiers (DLVA)  
The content of this specification may change without notification7/01/09  
DLVA  
Coaxial  
0.5 to 18GHz  
Continued  
Freq. Range  
TSS  
(dBm)  
Typ  
Linearity  
(dB)  
Max  
Dynamic  
Range  
(dBm)  
Log Linearity  
(dB)  
VSWR  
P/N  
Case  
(GHz)  
Max  
Max  
DA-0520S42TA  
0.5 - 2  
-42  
±2  
-39 - +5  
±0.7  
2.0:1  
DL1  
DA-0560S42TB  
DA-0518S42TA  
DA-2040S42TA  
DA-2040S42TB  
DA-2080S41TA  
DA-2018S40TA  
DA-4080S41TA  
DA-6012S41TA  
DA-6012S41TB  
DA-6018S41TA  
DA-6018S41TB  
DA-8012S41TA  
DA-8018S40TA  
DA-8018S41TB  
DA-1218S42TA  
DA-1218S42TB  
0.5 - 6  
0.5 - 18  
2 - 4  
-42  
-42  
-42  
-42  
-41  
-40  
-41  
-41  
-41  
-41  
-41  
-41  
-40  
-41  
-42  
-42  
±2  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
-39 - +5  
±1.0  
±0.7  
±0.7  
±1.0  
±0.7  
±0.7  
±0.5  
±0.5  
±1.0  
±0.5  
±1.0  
±0.5  
±0.5  
±1.0  
±0.5  
±1.0  
2.5:1  
3.5:1  
2.0:1  
2.5:1  
2.5:1  
3.5:1  
2.5:1  
3.0:1  
2.5:1  
3.5:1  
2.5:1  
2.5:1  
2.5:1  
2.5:1  
2.5:1  
2.5:1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
DL1  
±2  
±2  
2 - 4  
±2  
2 - 8  
±2  
2 - 18  
4 - 8  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
±2.5  
6 - 12  
6 - 12  
6 - 18  
6 - 18  
8 - 12  
8 - 18  
8 - 18  
12 - 18  
12 - 18  
Rise Time: 29ns(Typ)  
Delay Time: <30ns  
Log Slope: 50mV/dB  
General Specifications  
Maximum CW Input(No Damage):  
Recovery Time: 500ns(@+15dB)  
+20dBm  
Power Supply:  
±
12V DC  
Notes:  
1. Operating Temperature : -55 OC to +85 OC. Storage Temperature : -60 OC to +90 OC.  
2. Custom Designs Available  
3
188 Technology Drive, Unit H, Irvine, CA 92618  
Tel: 949-453-9888 Š Fax: 949-453-8889 Š Email: sales@aacix.com  
American Accurate Components, Inc.  
Detector Log Video Amplifiers (DLVA)  
The content of this specification may change without notification7/01/09  
DLV  
A
Outline Drawings (Size: mm)  
Terms and Definitions  
Operational Bandwidth is the range of input  
frequency over which the technical speci-  
fications of the amplifier are met.  
Log Slope is the straight line slope of the  
input/output transfer characteristics of the  
detected signal over the dynamic range. The  
log slope is expressed in millivolts per dB of a  
best-fit straight line as derived by a least-  
squares approximation of all data points  
Log Linearity is the maximum deviation in dB  
of all measured points from the calculated  
best-fit straight line. The dynamic range can  
be as high as 75dB, depending  
upon  
Dynamic Range is the range of the input  
signals in dB over which the output linearity  
requirement is met.  
Maximum Input Power is the maximum  
power that the logarithmic amplifier can  
withstand without damage.  
DC offset is the residual DC output of  
logarithmic amplifier when the input is  
terminated with 50ohm.  
a
DL1  
Tangential Signal Sensitivity (TSS) defines  
the input level that results in an output signal-  
to-noise ratio of 6 dB. TSS, which is directly  
related to noise figure and bandwidth, aids in  
defining the lower limit of the input dynamic  
range of a logarithmic amplifier. TSS is also a  
convenient way of specifying a logarithmic  
amplifier's noise performance, since noise  
Rise Time is defined as the time difference  
between the 10% point and 90% point on the  
rising leading edge of the output video pulse.  
Recovery Time for a logarithmic amplifier is  
defined in many ways by system engineers.  
The most common is to use multiple pulses  
and characterize the time between the 90%  
point on the trailing edge of the first pulse and  
the 10% point on the leading edge of the  
DL3  
4
188 Technology Drive, Unit H, Irvine, CA 92618  
Tel: 949-453-9888 Š Fax: 949-453-8889 Š Email: sales@aacix.com  
American Accurate Components, Inc.  

DA-0518S42TA 相关器件

型号 制造商 描述 价格 文档
DA-0520D72N AAC Detector Log Video Amplifiers (DLVA) 获取价格
DA-0520S41NA AAC Detector Log Video Amplifiers (DLVA) 获取价格
DA-0520S42TA AAC Detector Log Video Amplifiers (DLVA) 获取价格
DA-0560S41NB AAC Detector Log Video Amplifiers (DLVA) 获取价格
DA-0560S42TB AAC Detector Log Video Amplifiers (DLVA) 获取价格
DA-05BU-T-V ETC DS, DP, DA Series 获取价格
DA-05KU-T-V ETC DS, DP, DA Series 获取价格
DA-06 ETC DS, DP, DA Series 获取价格
DA-06-T ETC DS, DP, DA Series 获取价格
DA-06BU-T-V ETC DS, DP, DA Series 获取价格

DA-0518S42TA 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    5
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    8
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6