AT28C-01DB0.3MLF [AAC]
SMD Chip Attenuator; SMD贴片衰减器型号: | AT28C-01DB0.3MLF |
厂家: | AMERICAN ACCURATE COMPONENTS, INC. |
描述: | SMD Chip Attenuator |
文件: | 总4页 (文件大小:192K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMD Chip Attenuator
The content of this specification may change without notification 08/28/2008
Custom solutions are available.
HOW TO ORDER
AAC AT series high performance 0402, 0805,
AT
05
C
-01dB 0.3
M
LF
1206, and 1612 size thin film fixed chip
attenuators exhibit excellent high frequency
characteristics. The surface mount package is
ideal for low noise, inductance and parasitic
capacitance applications. The thin film
metallization also offers very stable
Terminal Type
LF = Lead Free
Packaging
M = Standard Reel Qty
O = 1,000/Reel
B = bulk (100 pieces)
characteristics over temperature and time.
Attenuation Tolerance
per the specification
APPLICATION
Attenuation Value
EIA standard value
Impedance
C = 50Ω
D = 75Ω (for 1612 size)
Gain adjustment and impedance matching
in high frequency circuits. Because control
circuits need signals with identical levels, and a
receiver receives signals with different signal
levels, signal levels could be adjusted by
combining a SMT attenuator and amplifier. At
the same time, termination can be obtained
using these low reflection attenuators.
Package Size
05 = 0402 18 = 1206
10 = 0805 28 = 1612
Style
Fixed Chip Attenuator
FEATURES
• Minimized parasite capacitance and inductance
• Excellent temperature and noise characteristics due to
thin film resistance elements
• Frequency ranges: DC – 10GHz
• Metallized resistors and electrodes are formed on ceramic
substrate covered with polyamide resin.
SPECIFICATION
Attenuation
Tolerance
Impedance
Tolerance
Rated Input
Power
Temperature
Range
Size
Attenuation
Imp
VSWR
Frequency Range
±0.3dB
±0.5dB
±0.7dB
0-3dB:
4-7dB:
8-10dB:
0-10dB: DC-10GHz
15dB: DC-5GHz
20, 25dB: DC-3GHz
0402
0-10dB
---
32mW
50Ω
≤1.5
-55°C ~ 125°C
0805
1206
0-10dB
0-10dB:
0-10dB: DC-10GHz
100mW
125mW
±0.3dB
50Ω
50Ω
±7% (DC)
≤1.3
≤1.3
-55°C ~ 125°C
-55°C ~ 125°C
0-10dB: ±0.3dB
16dB:
0-10dB:
DC-3GHz
16dB:
0-10dB: DC-10GHz
16, 20dB: DC-10GHz
0-10dB, 16dB
---
±0.5db
See below
0-10dB, 16dB,
20dB
See
Below
1612
250mW
50Ω
±2% (DC)
-55°C ~ 125°C
Rated Ambient Temperature is 70°C
ATTENUATION TOLERANCE (1612 Size Only)
DERATING CURVE
5-10GHz
Attenuation
0dB
Rank
DC-2GHz
+0.1dB/-0dB
±0.1dB
2-5GHz
+0.2dB/-0dB
±0.2dB
A
A
B
B
+0.4dB/-0dB
±0.4dB
1-10dB
±0.2dB
±0.3dB
±0.5dB
16dB, 20dB
±0.2dB
±0.3dB
±0.5dB
VSWR (1612 Size Only)
1.1: DC - 2GHz
1.2: 2 - 5GHz
1.3: 5 - 10GHz
188 Technology Drive, Unit H Irvine, CA 92618
1
TEL: 949-453-9888 FAX: 9494538889
American Accurate Components, Inc.
SMD Chip Attenuator
The content of this specification may change without notification 08/28/2008
DIMENSIONS (mm)
Size
W
L
T
W1
W2
a1
a2
t
0402
0.02±0.01
0.17±0.04
0.14±0.06
0.39±0.07
0.29±0.05
0.30±0.05
0.50±0.05
1.00±0.05
Size
0805
1206
L
W
t
a
b
W1
0.40 ± 0.20
0.55 ± 0.25
W2
0.40 ± 0.20
0.40±0.25
W3
0.35 ± 0.20
0.40 ± 0.20
2.0 ± 0.10
3.2 ± 0.20
1.25 ± 0.10
1.60 ± 0.20
0.40 ± 0.10
0.40 ± 0.10
0.50 ± 0.20
1.00 ± 0.25
0.60 ± 0.20
1.00 ± 0.20
dB
0dB
1dB
L
W
L1
----
L2
W1
W2
W3
0.70 ± 0.10
t
4.20 ± 0.20
3.00 ± 0.20
3.00 ± 0.20
3.00 ± 0.20
3.00 ± 0.20
3.00 ± 0.20
3.00 ± 0.20
4.20 ± 0.20
0.30 ± 0.20
0.30 ± 0.20
0.60 ± 0.20
0.90 ± 0.20
1.80 ± 0.20
0.30 ± 0.15
0.30 ± 0.15
0.40 ± 0.15
0.40 ± 0.15
0.40 ± 0.15
0.40 ± 0.15
0.85 ± 0.15
0.85 ± 0.15
0.85 ± 0.15
0.65 ± 0.15
0.65 ± 0.15
0.85 ± 0.15
0.8 ± 0.15
0.8 ± 0.15
0.8 ± 0.15
0.8 ± 0.15
0.8 ± 0.15
0.8 ± 0.15
4.20 ± 0.20
4.20 ± 0.20
4.20 ± 0.20
4.20 ± 0.20
4.20 ± 0.20
1.90 ± 0.20
1.90 ± 0.20
1.75 ± 0.20
1.60 ± 0.20
1.60 ± 0.20
0.70 ± 0.10
0.90 ± 0.10
0.90 ± 0.10
0.90 ± 0.10
0.90 ± 0.10
1612
2 ~ 3dB
4 ~ 6dB
7 ~10dB
16 ~ 20dB
CIRCUIT
0402
Applicable to all Sizes
c Input and Output Terminals
d Input and Output Terminals
e Ground Terminals
LEGEND
0805
1206
n Resistor:
Nichrome Thin Film
o Protective Coat:
Polymide Resin
p Terminals:
Solder Plating
q Substrate:
Alumina Ceramics
r Marking:
White Ink
1612
188 Technology Drive, Unit H Irvine, CA 92618
2
TEL: 949-453-9888 FAX: 9494538889
American Accurate Components, Inc.
SMD Chip Attenuator
The content of this specification may change without notification 08/28/2008
CHARACTERISTICS
Specification
Attenuation
Item
Condition
Size
Impedance
0~10dB
±0.03dB
±0.02dB
±0.02dB
±0.01dB
±0.05dB
±0.04dB
±0.04dB
±0.02dB
±0.05dB
±0.04dB
±0.04dB
±0.02dB
±0.03dB
±0.02dB
±0.02dB
±0.01dB
±0.03dB
±0.02dB
±0.02dB
±0.01dB
±0.03dB
±0.02dB
±0.02dB
±0.01dB
16, 20dB
±0.03dB
±0.02dB
±0.02dB
±0.02dB
±0.05dB
±0.04dB
±0.04dB
±0.04dB
±0.05dB
±0.04dB
±0.04dB
±0.04dB
±0.03dB
±0.02dB
±0.02dB
±0.02dB
±0.03dB
±0.02dB
±0.02dB
±0.02dB
±0.03dB
±0.02dB
±0.02dB
±0.02dB
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
±0.5%
±0.2%
±0.2%
±0.2%
±1.0%
±0.5%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.2%
±0.2%
±0.2%
±0.5%
±0.2%
±0.2%
±0.2%
±0.5%
±0.2%
±0.2%
±0.2%
Voltage of 2.5 times the rated voltage shall be applied for 5
seconds.
Short Time Overload
The attenuator shall be subjected to rated voltage for 90
minutes followed by a pause of 30 minutes at a temperature of
70±3°C. This constitutes 1 cycle. The cycles shall be repeated
for 1,000 hours.
Load Life
The attenuator shall be subjected to rated voltage for 90
minutes followed by a pause of 30 minutes at a temperature of
60±2°C with relative humidity of 90% to 95%. This constitutes 1
cycle. The cycles shall be repeated for 1,000 hours.
Moisture Load Life
Temperature Cycle
[-55°C 30 minutes-R.T. 3 minutes-+125°C 30 minutes-R.T. 3
minutes] The attenuator shall be subjected to 5 continuous
cycles.
Resistance to Soldering
Heat
The attenuator shall be immersed into the solder of 260±5°C for
10±1 seconds.
Distance between the fulcrums: 90mm
Bending width: 3mm
Substrate: Glass-Epoxy t=1.6mm
Substrate Bending
Solderability
The attenuator shall be dipped into the solder of 235±5°C for
3±0.5 seconds. A new uniform coating of solder shall cover
95% or more of surface being immersed.
A new uniform coating of solder shall
cover 95% or ore of surface being
immersed
Insulation Resistance
DC 500V for 1 minute
1000M Ω or over
±0.02dB
±0.005dB
±0.005dB
±0.005dB
±0.02dB
±0.005dB
±0.005dB
±0.01dB
±50ppm/°C
±50ppm/°C
±50ppm/°C
±50ppm/°C
Temperature
Characteristic
R.T. – R.T. +100°C – R.T.
Note: Impedance value and attenuation value shall be checked by DC measurement.
188 Technology Drive, Unit H Irvine, CA 92618
3
TEL: 949-453-9888 FAX: 9494538889
American Accurate Components, Inc.
SMD Chip Attenuator
The content of this specification may change without notification 08/28/2008
TAPE SIZE (mm) – Table 1
Size
0402
0805
1206
1612
A
B
W
F
E
P1
t
0.65 ± 0.03
1.60 ± 0.20
1.85 ± 0.10
1.15 ± 0.03
2.40 ± 0.20
3.60 ± 0.10
4.60 ± 0.10
8.0 ± 0.20
8.0 ± 0.30
8.0 ± 0.20
12.0 ± 0.10
3.5 ± 0.05
3.5 ± 0.05
3.5 ± 0.05
5.5 ± 0.10
1.75 ± 0.10
1.75 ± 0.10
1.75 ± 0.10
1.75 ± 0.10
2.0 ± 0.05
4.0 ± 0.10
4.0 ± 0.10
8.0 ± 0.10
0.5 ± 0.10
1.5 Max
1.0 ± 0.10
0.8 ± 0.10
TABLE 1
REEL DRAWING
TAPE MATERIALS
REEL DIMENSIONS (mm)
W+2
8.4
2
5
1
0.5
1
A±
B±
C±
D±
E±
A heat press sticks the transparent or half-transparent plastic
covered tape.
Tape Width
0.2
8.0±
∅178
∅178
∅60
∅60
∅13.5
∅13.5
∅21
∅21
2.5
2.5
0.1
12.0±
14.0
INSERTING DIRECTION
A tape reel diameter of 330mm is also applicable.
Attenuators are packed with their cathodes on perforation side
and with their electrodes faced with the bottoms of the pockets.
PACKAGE QUANTITY
Standard Package Unit (pcs)
Case Size
Type
Quantity
0402
0805
1206
1612
Plastic Tape
Plastic Tape
Plastic Tape
Plastic Tape
10,000
5,000
5,000
2,000
PACKAGE DESCRIPTION
ADHESION STRENGTH OF COVER AT PEELING
The standard number of attenuators to be accommodated by
one reel is as indicated in Table 1. One side surface of a reel is
marked with the following items of information.
When the cover tape is peeled off in such a manner as indicated
in the illustration below, adhesion strength F must be within the
range of 0.2994 ± 0.196N.
1. Name of Attenuator or product identification
2. Rated voltage
3. Attenuation value
4. Attenuation tolerance value
5. Quantity
6. Lot number for production month/year
7.
Manufacturer’s name or symbol
PACKING & STORAGE
The attenuators are packed in such a manner that they will not
possibly be damaged during transit or storage. As far as they
are stored at normal temperature with normal humidity (5 to
35°C, below75% RH), they are warranted for a period of two
years from the date of manufacture.
188 Technology Drive, Unit H Irvine, CA 92618
TEL: 949-453-9888 FAX: 9494538889
4
American Accurate Components, Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明